line down lcd screen factory

Vertical lines appearing on LCD screen is very common. Whether the screen belongs to a laptop computer or desktop PC, mobile phone, or even a television, the fault is usually due to the ribbon cable and its connections.

A faulty ribbon cable can cause all sorts of havoc manifesting in bright vertical lines. Sometimes they can be coloured lines such as blue, green, grey, black, and red. The lines can appear thick or thin and on just one-half of the screen. Sometimes the fault will manifest as two vertical white lines. You can even get horizontal lines as well.

If you have lines appearing on the LCD screen, then the first simple thing to check is the seating of the ribbon cable that connects the display panel to the motherboard. Most of the time, the fault is with the poor connection made by the ribbon cable.

One of the most common problems with ribbon cables is oxidation of the contacts. It can happen either on the ribbon cable contacts or on the socket contacts. Manufacturers often use a mix of gold and copper for the electrical contacts, however, if they have not used enough gold, then oxidation occurs over time. This results in a working television or laptop screen suddenly exhibiting lines.

One of the most common faults with laptops is that the ribbon cable connecting to the LCD panel cracks. It typically fails near the hinge area due to flexing in that region, and over time, some of the tracks on the plastic cable breaks. I have seen these types of faults on many laptops. It does not matter whether it is a Lenovo, IBM, Acer, Samsung, Toshiba, or even a MacBook Pro!

This type of fault can also occur on LCD televisions; however, it tends to be on new units, where the box has received an impact during transit from the factory.

I used this same method of troubleshooting to repair an LCD television recently. Modern televisions have a video out socket, and if you feed the signal from that to another monitor, you can check for the quality of the video display. If the external monitor does not show lines, then you know for sure that it is a connection issue. Hence, this method of troubleshooting works for some of the modern televisions as well.

When half of the vertical interlace is missing showing a picture that is broken up vertically, the display appears with vertical lines. This is usually due to a cracked ribbon cable.

Generally, for laptops a replacement cable is always required due to it breaking near the hinge. I had this Dell laptop and replacing the LCD ribbon cable solved the problem. I managed to buy a replacement from Dell for a modest price £6.00. The laptop was just outside the warranty period; however, they still shipped out the cable free of charge. This is the reason why people buy Dell. In my experience Dell tend to stand by their customers and products, and their prices for replacement parts are realistic and down to earth.

Whether they"re red, green, or blue, vertical lines on a computer monitor aren"t a good sign. Although it could mean your monitor is getting old and may soon need a replacement, it may just be you have a faulty HDMI or DisplayPort cable. Alternatively, it may be your graphics drivers need updating, or you need to restart your monitor or PC.

Vertical lines on a monitor are one of three core problems: the display panel itself is defective, the connection between your computer and the display is faulty, or it"s receiving erroneous information.

There isn"t much you can do about the former unless your monitor is within its warranty period, but the others have some relatively easy fixes which might get rid of the vertical lines on your computer screen.

The first step to getting rid of vertical lines on your monitor is to see if it"s to do with the display itself or some other issue. Open your monitor"s menu system and see if the vertical lines show up even over the top of the menu screen.

If your monitor"s menu isn"t in the right place to test whether the lines are on the screen or to do with the connection, you can also unplug the monitor and see if the lines are still present when it is powered on without anything connected to the display.

The exact cause of the vertical lines on your computer screen will only be apparent if and when you fix it, so it"s best to start trying these examples to see what works.

Update your graphics drivers. If your graphics drivers are outdated, there may be a compatibility issue causing the vertical lines. Update your graphics drivers to see if it resolves the issue.

Try the monitor on another PC. If you can, test the monitor on a different PC. If the lines are still present, the monitor or the cables are to blame and need replacing. However, if you"ve tried all of the above and the lines aren"t there, you may have a problem with your PC itself.

Horizontal lines may indicate overheating, physical damage, or a screen resolution issue. To fix the issue, check the monitor connection and resolution, and remove any magnets nearby. Also, turn the monitor on and off, restart the computer, and connect your computer to a different monitor to test it.

To fix ghosting (screen burn) on a monitor, try shutting down the monitor and leaving it off for 48 hours. Another option: Use an all-white screensaver and let it run on your display for several hours. You can also try a software tool that fixes stuck pixels, such as JScreenFix.

The vertical lines on phone screen Android problem mostly occur when your device becomes too old or if there is any hardware damage. Well, the problem seems quite serious. However, you can fix the issue by restarting, power cycling, or factory resetting your Android phone. Also, go through this article completely to know more fixes to resolve this problem and use your phone without any further problems.

The problem won’t let the users access their phone as the app icons or screen seems blurry or unclear almost making the device difficult to use. So, here, in this article, we have covered all the workable fixes that will help you get out of this situation and let you access your phone once again. So, without any worries, follow the mentioned troubleshooting methods step-by-step to fix vertical lines on Android phones.

Now it’s time to check out how to fix vertical lines on Android phone. Go through them and check out which one works for you to fix the issue that was due to a software glitch.

Whenever you come across vertical lines on mobile screen the first thing you should do is simply restart your phone once. Restarting has the power to fix small glitches that occurs on Android phone.

You should ensure your phone is fully charged. If not then charge your device to full. This is instructed because some Android phone users have tried this and it helped them to get rid of the vertical lines issue.

Another solution that you can try to troubleshoot vertical green line on phone screen is to remove your device’s battery, case & SIM card. Many users have found this way helpful in their case, that’s why it is suggested to you.

Even restarting your phone in safe mode also has the chance to find out the culprit and can solve vertical lines on mobile screeneasily. Doing this will check if any third-party app is the culprit for the problem.

In this mode, if the vertical lines are removed then ensure that the third-party app is the culprit for it. So just find out the latest app installed on your phone and immediately uninstall it.

Generally when your phone drops from a height then there is a possibility that LCD might have disconnected from the logic board. If this happens then try to push the screen gently just to re-establish the connection.

You can do it by yourself by simply placing one finger on the screen and another one on the device and then pressing the screen gently. You should be careful not to press hard as it can break the device.

Due to the outdated version of the OS, users are facing numerous errors and bugs on their smartphones. Maybe vertical lines on Android phone screen issues have occurred because of the outdated phone. So simply check for the latest update of your device OS by following the below steps:

You should also try to factory reset your Android phonein recovery mode. Though this method has a chance to erase all your data from your phone but it can fix white lines on the Android phone screen you are coming across.

It has worked effectively to repair several issues like Android black/blue screen of death, apps keep crashing, settings has stopped, and others. So this can be useful to fix vertical lines on Android phones.

Well, mostly the phone display when not works or shows you vertical lines then somewhere the causes is due to a fault in a hardware component. This issue can only be fixed at a service center. But before going there, you can try several manual options to fix vertical lines on Android that are caused by a software glitch.

Yes, the vertical lines on Android phone screen are generally caused by faulty hardware or software component. But the issue can be fixed by following manual options or at a service center. But the vertical line on Android is fixed without any further problem.

Several times, your Android phone screen starts flickering or flashing. In such a situation, the best way to fix the issue is by putting the device into safe mode. This will give you an idea of whether the issue is related to apps or others. And then delete the apps causing problem.

So, above are the methods that will help you resolve vertical lines on phone screen Android.However, in case you lost any of your Android device’s data, use the

Power down the computer and unplug all peripherals. If you are using a laptop, take its battery out by flipping it upside down and sliding the battery release latch. Press and hold the power button for 15 or 20 seconds to clear all residual power from the system. Some of the computer’s power might have been transmitting to the monitor, causing it to short out. Reconnect everything and turn the system back on to see if the lines are gone.

Unplug the monitor from the back of the computer and wait a few seconds until it displays a message “No signal.” If the no signal message also has vertical lines, you know the problem is in the monitor and not in your computer. Press the “Menu” button on the screen and then use the other buttons to browse for a “Factory Settings” mode. Select this mode to reset the monitor to its original settings. If the lines persist, the monitor may have been dropped or exposed to a magnet -- which can’t be fixed.

Reconnect and turn the computer back on. Look for the lines at boot up: if you see lines before Windows loads, the problem is either with the video card, the video connection cable -- whether HDMI or VGA -- or the monitor itself. If the lines only appear in Windows, the problem is a Windows setting -- most likely the refresh rate. Right-click on the Desktop once Windows loads and choose “Screen Resolution.” Click “Advanced Settings,” “Monitor,” and then lower the refresh rate to see if the lines disappear.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Watching your mobile screen with those white or black vertical/horizontal lines is annoying. In short, it’s tough to use a phone with these lines appearing on the screen. Typically, this issue is associated with the LCD, caused by a faulty hardware component in your device due to some accidental fall or water damage. Phones with such damages can only be fixed at a phone repair center.

If you are itel, TECNO or Infinix phone user and is troubled with vertical and horizontal line issues, make a reservation now without waiting time at the service shop. Carlcare Service will fix your phones easily. If your phone is under warranty, Carlcare can also save you repair costs. Check warranty now>>

Before you head on to the fixes, let’s make your phone data safe. Sometimes, these lines are irreversible, and even the solutions you’re up to try may be followed by some sort of data loss. Therefore, the first thing you should do is make a backup of important files and apps on your device. Some popular ways for data back in Android devices are via:

If there’re white lines on the screen, this solution may prove effective. A battery cycle is when you charge a mobile to 100% and let it drain to 0% again. Usually, the lines will disappear soon as you charge the battery fully.

If the above methods don’t work, it’s time to try this masterstroke. Using your phone in a safe mode will confirm if the lines are because of some faulty app or software.

Check if the lines are gone! If yes (hopefully), then a third-party app is the culprit. Now uninstall the latest downloaded applications until the issue is gone. OR you should try the Solution:4

Suppose the lines are still visible. Then the issue is most likely due to some hardware failure- and the best option for you is to take your device to a reliable repair center.

It won’t be aggregation if you call “Factory Reset” the mother of all solutions. It fixes most of the issues caused by an app or software glitch. The process actually brings your phone back to the factory setting by erasing all the apps and files you’ve downloaded post your phone purchase.

If the horizontal or vertical lines still appear on your phone screen after trying all the above methods, you better take your device to a reliable mobile repair store near you. Most likely, it’s a faulty hardware component that needs to be repaired or replaced. Here, we would suggest you opt for only an authorized service center, as this will ensure flawless repair at a reasonable cost. Besides, if any of the components have to be replaced, they will be genuine and as per your specific requirements.

As the official service center part, we provide 100% original spare parts and various value-added services for Infinix, Itel, and TECNO users. Now with the online reservation service through Carlcare App, you don’t need to wait while your phone is repaired at our service centers.

Ours is a Sony Bravia that is now over 10 years old. Several months ago we started noticing lines, especially on the left (our left) side of the screen. They’d go away after the tv warmed up. Then we started noticing it was darker on that side of the screen, but again, after the tv warmed up the screen would be normal. Then about two months ago it started getting worse and didn’t ever get completely better, even after the tv warmed up. So I watched some youtube videos that all talked about the ribbon cables becoming loose over time and to apply pressure along the top and see if that made it better, and if so, it was a loose cable and if you put electrical tape or something that would help keep the pressure, it would fix the problem. Hubby pressed along the top and sure enough, when he pressed in one spot on the left side suddenly the picture cleared up. Stayed good for about a week, then problems again, pressed again, fixed again. A week or so later, same problem, but this time when he pressed on it nothing got better.

So I decided to take the cover off and look at it better. As I was pressing on the tops of the ribbon cables that run down from the top of the frame, for a minute it got better but then suddenly there was a wide white vertical line, with a thin green one down the center of it, running down the front of the screen, and it was perfectly aligned with one of the cables. So now I still have the dark side of the screen, and some ghosting, and some lines, but now this bright white streak/line right down the front. Another weird thing is that if the whole screen is bright (like watching a show set in a snowy place) then the darkness even on the left side is basically gone, but if the scene is dark at all, that side is almost black. I don’t know if it means that particular ribbon cable is bad, or if something is loose, if things need to be replaced or what. It’s very frustrating as it’s been a great tv. Hubby wants to just buy a new one, but even if he does I would still like to try and figure out this one as it could then go in another room.

For example, it could signal that the power supply is either failing or faulty. In other cases, it could mean you have not connected the HDMI cable well, or there is a poor connection between the processing board and the panel. But another cause could be the picture does not fit the screen exactly.

When you see black vertical lines on your TV screen, the first step is to identify the primary cause of the problem. Start by testing the picture, check your cable connections, and verify that your external devices are working well.

You can also try changing channels to determine whether the lines appear on all channels. Understand that lines on a TV screen can either be a hardware or software issue.

Ideally, aspect ratio, screen resolution, and horizontal or vertical scan frequencies are settings that affect picture display on most TVs. In this case, refer to the external device’s user manual to adjust the picture format settings.

Your TV software runs the device. An outdated software program can cause many problems like vertical lines, poor picture quality, or failure to install apps.

In some cases, a TV fails to process a combination of image settings you have provided. That can cause many picture errors, including flickering lines on TV. While you can go through all the settings one by one, consider resetting your device.

Sometimes vertical lines on an LCD display could mean a damaged T-Con board. The T-Con or timing control card controls the timing of pixels displayed on the screen. If your T-Con board is faulty, the only solution is to repair or replace it.

If you see Samsung TV vertical black lines on the screen, check whether the lines are permanent or moving. If they are moving, your input source is incorrect. Disconnect and reconnect the video cable or HDMI to check if it resolves the issue.

Thirdly, you may come across a problem with your Samsung Smart TV whereby colored lines appear on the edge of your TV screen. The lines may be black, white, or green along the top, bottom, or side of the screen.

The issue occurs when you have set the picture size of your TV to JustScan or Screen Fit. Samsung calls the lines an Overscan line. If your setting is JustScan, the picture resolution of specific programs will not fill the screen, thus causing the lines.

You can resolve the issue by setting the picture size on your Samsung TV to 16:9. The setting will extend the picture beyond the edges and eliminate the Overscan line.

You can fix a TV screen with lines in different ways. For example, you can change channels to see if the lines appear on all changes, change the input source, check cable connections, or power-cycle your device.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

So, why there are green lines on a monitor? Well, several factors might be at play if the displays attached to your PC aren’t operating correctly. It’s conceivable that your adapter or cable connection is the problem. Change the cable if it doesn’t work. If nudging doesn’t work, try another.

Throughout this post, we’ll explain why green lines occur on your display and the best techniques to remedy them. The extra information will be invaluable in fixing all of your monitor’s green lining concerns. It’s time to delve in!

There are a variety of possible causes for horizontal green lines or vertical lines on your computer screen, from outdated video card drivers to damaged ribbon cables and improper video cable connections. To determine whether the problem is software or hardware, you may examine the BIOS settings.

When you see a green line on your computer screen, you should inspect your display for any faults, including all the connectors. There might be a problem with the cable causing the monitor’s color to lose signal.

It would help if you examined the possibility that your computer has been infected with a virus or other malicious software. While this isn’t one of the most prevalent reasons for a green vertical line on the display, it’s still possible.

Faulty graphics drivers might also cause problems with your monitor’s connection to the computer. However, although this is the most common symptom, it may also be seen in the form of green lines on a monitor.

Because Windows 10 does not contain the BIOS, any horizontal or vertical striations on your display problem result from a software problem. If you don’t see any horizontal or vertical lines on your Windows 10 computer screen, this is likely a hardware problem.

It’s possible that your computer’s drivers don’t cause the flickering green lines on your display if they occur immediately after the computer has started up and not on the initial screen while the machine is starting up.

You may also try downloading the drivers from the hardware manufacturer’s website if it doesn’t work. Make sure you’re looking at “Display adapters” (in this case, “NVIDIA GeForce 9800 GTX/9800 GTX+”) and the graphics card’s name.

This is the standard procedure to remove the green lines on the monitor, regardless of whether your motherboard is set to UEFI or a classic BIOS configuration:

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

Monitoring a computer’s refresh rate can help identify and correct problems with graphics performance. The monitor’s refresh rate refers to how often the screen updates its image. A slow refresh rate can cause visual artifacts, such as green lines, on the screen.

Collectively, these lines indicate that the monitor is not keeping up with the latest graphics rendering instructions. This can lead to an overall degraded experience when using the computer.

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

Knowing your screen resolution, even if you aren’t an engineer or a photographer. You can appreciate your multimedia activities better if you know what you have and what you can do. In Windows 10, you may verify your screen’s native resolution by following these steps:

The resolution may be changed by selecting a different option from the drop-down menu. You should only view content that is compatible with your computer’s capabilities.

Be sure to switch off your display when not in use. A screen saver program and turning off the display when it’s not in use will significantly prolong the monitor’s life.

The green line of death seems to be caused by a hardware problem based on the current symptoms. If you go back in time, you may discover similar problems on non-Apple devices. This problem only appeared on OLED-display phones, to be more exact.

There may be more to the problem with water damage than just a replacement screen, but it’s typically just a matter of getting a new LCD or OLED display.

Due to obsolete GPU drivers, the green lines on a Windows 10 laptop are standard. Using specialist driver update tools, you may repair this problem. One of the most prevalent reasons for this issue is a malfunctioning laptop display.

Your phone’s LCD might be damaged if you don’t mend a cracked screen right away. Damage to the LCD screen might occur if dust penetrates the screen cracks. Your phone’s LCD screen might be damaged if you drop it in water or other liquid.

That’s all about the green lines on the monitor from us. An external display with bothersome vertical lines or horizontal lines may be fixed by testing the image to determine what causes these lines on the computer monitor.

It doesn’t matter whether the computer, cable box, or any other input source is to blame; the monitor, its LCD screen, or internal hardware is to blame.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Back in April last year, Lionel blogged about a vertical line issue that could potentially affect customers who own 17" Inspiron 9200, 9300, and XPS Gen 2 notebook LCDs.

After engaging our engineering and product group teams, as well as the LCD manufacturer, to investigate and isolate the cause of this issue, we narrowed the problem down to a specific part within a certain date range. During that research, we found that the part may also affect the Inspiron 6000, 8600, Latitude D800, D810, and Precision Mobile Workstation M60 and M70 LCDs. That led to Lionel"s second blog post on the topic.

We"ve taken steps to contact those who may be affected to offer a warranty replacement and also put in place measures to rectify any out of pocket expense incurred by out of warranty customers who replaced the affected screens in the past.

That said, there are other variables that can lead to vertical and horizontal lines on other system types regardless of size or model. Lines on an LCD can appear sporadically, at random places on the screen, and for what appears to be for no reason at all. These lines can be caused by normal LCD failures brought on by a multitude of variables, which I"ll try to cover here. Vertical lines tend to be a more common issue in notebooks, primarily because they are subjected to more wear and tear on a daily basis than a desktop LCD.

The most common cause of these lines is simply a loose connection. As notebook systems are carried around, no matter how careful we try to be, they have a tendency to be bumped, jarred, and even sometimes the heart stopping drop. Though today"s notebooks are designed to better absorb and dissipate small shocks, it can still have adverse affects on the notebook"s internal components. A good bump or series of bumps and random movements can cause the LCD cable to become loose. The connection remains intact, but some breaks in the signal can lead to impurities in the reproduction of the image on the screen. Think of a loosely-fastened garden hose… water will still be directed and outputted through the end of the hose, but some water is lost at the connection. This is easily fixed by tightening the hose. Similarly, the LCD can usually be fixed by simply making sure the connection is secure. (Service manuals for Dell systems can be found here on support.dell.com.)

If these simple fixes don"t seem to work, then we need to look at the actual failure possibilities. Vertical or horizontal lines that don"t disappear after the basic troubleshooting are usually caused by circumstantial failures. The most common type of failure that leads to lines on the display is an open circuit connection between the driver IC (flexible circuit board) and LCD glass. This is usually caused by external stresses (mechanical, thermal, etc…), which causes the flex circuit to detach from the glass. The variables leading to the detachment are wide and are dependant on individual cases. With the amount of travel and various operating environments of a notebook, pinpointing the exact cause can be near impossible, unless of course the problem immediately follows a catastrophic event such as dropping the notebook or prolonged exposure to heat or cold, such as leaving the system in a car.

Investigations into technical problems, including which systems, batches, and date ranges are affected, are rigorous, and we strive for accuracy. Unfortunately, not every technical problem can be traced down to the root cause. But in every case, we try to proceed appropriately and in all fairness to affected customers.

If you are experiencing any problem with lines on your LCD and your system is not one of the potentially affected units, or in the date range outlined in Lionel"s earlier posts, please contact technical support to troubleshoot and identify possible fixes. See below for details on how to do that.

Q: "Vertical lines on iPhone 11 screen!! This is what happen to my phone after I bought it 3 days. Several lines appeared on the screen suddenly. Any idea why it happens? Any other user facing the same problem with me?" – from an iPhone 11 user

There are always a large number of reports from users stating that they find vertical lines on iPhone screen. This is an old problem that has been existing since iPhone 4, and the color of the lines may vary from red, black, blue, or purple. It could result from physical damage and software problems. Anyway, to solve this problem, you should follow the 8 solutions below, so that you can get rid of the lines while reducing the cost of the repair to the minimum.

A force restart is similar to taking out the battery and putting it back on. It is going to completely shut down all the apps and programs running on your iPhone. Whenever you see there are lines across the screen, you can fix it easily by hard rebooting your iPhone. After the hard reboot, the lines on the screen may disappear. To hard restart your iPhone, follow the tutorial enclosed below.

iPhone 8 and later iPhones: Press the "Volume Up" button and release it quickly, then press the "Volume Down" button and release it quickly; then hold the "Power" button until you see the Apple logo on the screen.

It might seem ridiculous, but in some cases, iPhone screen lines vertical problem are caused by things as little as water drops or dust. These things can be difficult to notice when you have a screen protector on the screen. If the water drops or dust get stuck between the screen and the screen protector, it is natural that there will be vertical lines across the screen. Therefore, you might as well remove the screen protector, clean the screen with a cloth and see if the lines have gone.

Essentially, cycle charging means charging the battery to 100%, then using it until it drains to 0%. When the phone is charged to capacity again, the vertical lines might disappear.

It is also possible for vertical lines to appear on LCDs when LCD cables become disconnected from the logic board during sudden jolts or a fall. A slightly shifted iPhone screen does not necessarily mean it is damaged; it is just a slight shift.

It might be possible to remove the vertical lines by gently pushing the iPhone"s screen back into place to reconnect the cables with the logic board. Make sure that you do not apply too much pressure to the screen in order to prevent the screen from breaking further. The steps are as follows:

This issue may result from the bugs of some outdated iOS versions. A user complains to us that vertical lines on iPhone 5s screen, and simply updating the system works. We understand that some users may think that iOS updates are useless in general, but that is not true. Except for the updates of new features, iOS update often contains bug fixes, which is very important to the normal function of the iPhone.

Step 2. If there is an available update, press the "Download and Install" button to confirm your update. The updating process will begin, what you need to do is just make sure the Wi-Fi connection is good and wait for the update to finish.

In some cases, system error will result in vertical lines on the iPhone screen. The easiest solution is Joyoshare UltFix. It is a professional iOS repair tool that provides two modes to repair more than 150 iOS issues. Joyoshare UltFix fully supports iOS 16 and is compatible with almost all models of iPhone, iPad, iPod, and Apple TV.

The strongest advantage of this program is that it is able to repair iOS issues, including the iPhone screen vertical lines, without any data loss. Besides, the software will put your iPhone into Recovery mode with one-click. If the lines on the screen are so thick that it blocks the screen, you can also use the Advanced Mode to restore the iPhone to its normal state.

Some of the info about your iPhone will be displayed on the screen. Make sure all the info is correct and change the wrong parts. Then press the "Download" button to download the matching firmware package.

Lastly, click the "Repair" button. The downloaded firmware package will be unzipped, and the program will start to fix the vertical lines on your iPhone screen. A few minutes later, the repairing process will finish, and the lines on the screen will disappear.

No matter is purple vertical lines on iPhone screen, or other colors, these ways may help you. A factory reset will be needed in the way. In this process, your device is wiped clean and returned to its original factory settings. All your data will be lost during this process. Before restoring your data, ensure that it has been backed up. To revert to factory settings:

Step 6. Ensure that the factory reset is completed by giving the device some time to do so. You should check whether the vertical lines have disappeared after restarting your device.

As we mentioned in the beginning, the vertical lines on your iPhone screen are usually a sign of physical damage to your hardware. If you see the lines after dropping your phone, it is very likely the screen or the motherboard is damaged. In this case, letting the Apple technicians fix the hardware damages will be a lot safer than repairing it on your own.

It is common for smartphone devices to have vertical lines. A variety of gadgets are affected, not just iOS devices. Luckily, vertical lines on iPhone screen should be able to be dealt with by most of the solutions listed here. Note that some of the methods mentioned above may lead to data loss, so we strongly recommend you to use Joyoshare iOS System Recovery directly, which will not lead to data loss and has a very high success rate. We hope that one of the methods in this article can help you.

Pull up your menu display---If the lines show up behind the menu display then more than likely it"s not your main board% (You have sound and picture so I don"t think it"s power board related%)---So let"s look at the T-Con board---

The T-CON board, short for timing control board, is the part of an LCD screen that relays messages between the device"s processor -- it"s brain -- and the display itself. The T-CON board is responsible for synchronizing different parts of the screen with the information it receives from the processor. When the T-CON board fails, the timing between different parts of the board is disrupted, leading to errant lines, both horizontal and vertical, as well as pixelation

In this picture of your T-con board you will have to also clean the 2 upper flex cables to your screen. 1 is vertical the other is horizontal.If this still does not help then it could be screen failure.