fix stuck pixel on lcd panel brands

That annoying dead pixel on your TFT, OLED, or LCD screen might just be stuck and easy to fix. We"ll show you how to do it. You can still return your monitor if this doesn"t work; nothing we recommend here will void your warranty.

Yes, you should test any new monitor for bad pixels. You can simply run your screen through a palette of basic colors, as well as black and white in full-screen mode using a tool like EIZO Monitor Test.

EIZO Monitor Test is an online tool that lets you find and eventually fix stuck pixels. It packs many options into a single test window, but it"s easy to use once you have an overview.

To test your screen, check all the boxes you want to include in your test. We recommend the default setting of having all boxes checked. If you"re testing multiple monitors, you can open the test on an additional monitor. When you"re ready, click Start test to launch the full-screen test window.

Below you see the first test pattern. Each screen has an explainer in the bottom right detailing what you should look for. Next, you"ll see a menu that lets you go from one test to the next on the left. Move through the black and white screens and all the solid colors (green, blue, and red) and check our screen. To exit, press the ESC key or the exit symbol in the top right.

This is a very thorough test not only meant to identify bad pixels but also powerful enough to test the quality of your monitor. Unfortunately, with Flash no longer supported by most browsers, you"ll probably have to use the executable version to make it work.

Move the mouse to the top of the test window, and a menu will appear. There is an info window that you can turn off with a button in the top right corner of the menu. Then click on the Homogenuity test point and move through the three colors as well as black and white.

Fingers crossed, you won"t discover anything out of the ordinary. In the unfortunate case that you do, let"s see whether it"s a stuck or a dead pixel and what you can do about it.

A stuck pixel, sometimes wrongfully referred to as a hot pixel, is defective because it receives incomplete information. Hence, it appears in one of the colors that its three sub-pixels can form, i.e., red, green, or blue. Strictly speaking, hot pixels only appear in digital cameras when electrical charges leak into the camera"s sensor wells. Sometimes, stuck pixels fix themselves.

In a dead pixel, all sub-pixels are permanently off, which will make the pixel appear black. The cause could be a broken transistor. In rare cases, however, even a black pixel may just be stuck.

Unfortunately, you can"t fix a dead pixel. You can, however, fix a stuck pixel. As I explained above, it"s hard to tell the two apart. Either way, these are the methods you can try:

Finally, you can try a manual method that involves rubbing the stuck pixel with a damp cloth or a pointy but soft item, like the rubber/eraser at the end of a pencil.

The tool will load a black browser window with a square of flashing pixels. Press the green button in the bottom right to go full-screen. Drag the flashing square to where you found the stuck pixel and leave it there for at least 10 minutes.

UDPixel, also known as UndeadPixel, is a Windows tool. It can help you identify and fix pixels using a single tool. The program requires the Microsoft .NET Framework. If you"re not on Windows or don"t want to install any software, scroll down for the online tools below.

Should you spot a suspicious pixel, switch to the Undead pixel side of things, create sufficient amounts of flash windows (one per stuck pixel), and hit Start. You can drag the tiny flashing windows to where you found odd pixels.

The PixelHealer lets you flash a combination of black, white, all basic colors, and a custom color in a draggable window with customizable size. You can even change the flashing interval and set a timer to close the app automatically.

Let it run through all colors in Auto mode to spot whether you have any weird pixels on your screen. If you do, start the fix, which will rapidly flash your entire screen with black, white, and basic color pixels.

Should none of these tools resolve your stuck or dead pixel issue, here is one last chance. You can combine any of the tools detailed above and the magic power of your own hands. There is a very good description of all available techniques on wikiHow. Another great step-by-step guide can be found on Instructables.

This works because, in a stuck pixel, the liquid in one or more of its sub-pixels has not spread equally. When your screen"s backlight turns on, different amounts of liquid pass through the pixel to create different colors. When you apply pressure, you"re forcing the liquid out, and when you release the pressure, chances are the liquid will push in, spreading around evenly as it should.

When all attempts to revive your bad pixel fail, the next best thing you can do is to make peace with it. One ugly pixel won"t break your screen, and eventually, you"ll forget about it. If the defect affects more than a single pixel, however, or just bothers you a lot, you can always replace your monitor.

First, check the warranty. The manufacturer or the marketplace where you purchased the monitor might cover dead pixels. Note that most manufacturers define a maximum number of allowable bad pixels for specific resolutions, and the warranty won"t apply until your monitor crosses that threshold.

Bright or dark sub-pixels can occur during the production of the LCD Monitor panel but does not affect the LCD Monitor functionality. The customer may notice the bright or dark spots if the film of the liquid crystal does not perform as expected while customers uses the LCD monitor. However, this is not considered a defect unless the number of bright and dark subpixels exceeds the maximum allowable threshold (...)

On a monitor with over 12 million pixels (Wide QXGA+, 2560x1600 pixels), for example, LG"s pixel policy says that 12 bright or dark sub-pixels is the maximum you have to tolerate.

Should all of these approaches fail to fix your dead pixel warrior, at least you"ll now know it"s not simple to fix, and, you might actually have to replace the screen.

This article was co-authored by Luigi Oppido and by wikiHow staff writer, Jack Lloyd. Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.

You may experience a stuck pixel on a new or used LCD screen. If your monitor’s warranty has expired, or the manufacturer won’t replace the monitor because it considers one or two stuck pixels as acceptable, there are a few things that you can do.

However, they should help out in most situations, and therefore you might want to give them a try before you spend your money calling a specialist or decide on getting your monitor replaced.

This is obviously the safest method, but it’s not always effective. If you recently discovered a stuck pixel, you can try to turn off the monitor and unplug it for a day or two. When the damage is caused by overuse, this could help.

There are many websites that offer a stuck pixel fixing service. They work more or less in the same way, by flashing pixels and hopefully un-stick the ones that are defective.

You’ll find that many of them run with Flash, which is no longer available – fortunately, here’s one that you can still rely on – JScreenFix. JScreenFix is a free online service that can solve your problem of stuck pixels. You don’t have to download anything, so it’s not invasive nor harmful.

Visit the website jscreenfix.com and scroll down to find the Launch JScreenFix button – click on it. It will open a black screen with a square full of flickering pixels. The instructions pop up right there – however, what you’re meant to do is drag this square to the area where the stuck pixel is. Then, leave it for at least ten minutes.

If it doesn’t fix your stuck pixel on the first try, you can do a few attempts leaving it for a little longer. Usually, this method gets the job done, but it’s not a 100% guarantee.

*Safety note: If you have epilepsy, you should avoid using any of these stuck pixel fixer websites or software as they work with flashing erratic lights.

Any technique that implies applying pressure to fix a stuck pixel can potentially make more damage than good. Here you’ll find some precautions you should take to minimize these chances.

However, if you decide to do this, it’s at your own risk. Turn on your computer screen or monitor as the pixel needs to be working for the pressure methods to stand a chance.

Determine if you have hot, stuck or dead pixels – if you don’t know the difference among these, read the next section first. Only if the pixel is stuck, you’ll have a chance at fixing it with a pressure method.

Open a black image as background in full-screen mode or use a black browser window such as this. Either way, don’t just leave a blank signal. This again has to do with the fact that you need the pixel to have the backlight on. Make sure the screen is clean to avoid confusing dust with bad pixels.

Get a Stylus or Touch pen to put pressure on the monitor without damaging it. Otherwise, you can try using your finger wrapped with a microfiber cloth.

Some people recommend a heat method where you use a hairdryer to warm the spot while you’re putting pressure on the monitor to fix a stuck pixel. Others suggest using a hot water damp cloth to apply the heat directly.

However, you could end up with something worse than a stuck pixel. The pressure method already represents a small risk of damaging your monitor – if you add heat, you’re increasing that risk.

To understand the possible pixel problems that you can face – and whether or not you can fix them – you need to know that an LCD screen is made by pixels. Three sub-pixels form each pixel – one is red, one is green, and one is blue (RGB).

When you have a pixel defect, it means that one or more of the subpixels aren’t working as they’re supposed to. Let’s see how these can present. Dead pixels

Dead pixels show no light, and what’s the absence of light? Dark. So, if you see a black pixel on your monitor, it’s a dead pixel. These are more noticeable when you’re working with a white background. Stuck pixels

The third option is that you see a white pixel – these are known as hot pixels. That means that all three colors (red, green and blue) are always on – this results in white light. These are more obvious on a dark background.

So, now you know what type of faulty pixels you can run into and how you can identify them. At this point, you might be wondering how do stuck pixels happen?

LCD stands for liquid crystal display. These monitors are made with multiple layers. In the far back, they have the light source that illuminates the screen with white even light.

The reason why we don’t see a fully white screen all the time is that there’s also a layer with color filters. This layer has a red, green and blue filter per pixel (RGB) – each of those would be a sub-pixel.

Two of these ‘blocking’ layers are polarizing filters – the first one filters the light waves in one orientation and the second one in the opposite direction.

Anyway, all this explanation is to tell you that stuck or dead pixels often happen because there is a broken transistor that fails to supply voltage to a certain pixel or sub-pixel. Keep in mind that there are two types of LCD monitors: TN (Twisted Nematic) and IPS (In-Plane Switching). On TN monitors, the default without voltage is on. So, if the transistor is not supplying power, the pixel won’t be dead (black) but hot (white). On IPS monitors, it works the other way around.

Most of the times, the damage in the transistor is a manufacturing defect. However, it can also happen because the monitor falls or it suffers physical damage.

So, you can use a dead pixel test. There are some free ones online such as the one from LCD Tech. You simply need to click on the Start Test button, and it will automatically enter full-screen mode in complete white.

Make sure your monitor is clean to identify dead pixels better. Because the screen will be completely white, you can also use this to find stuck pixels. On the other hand, a hot pixel won’t be visible – for these, you would need a dark screen.

Sometimes you can have bad luck and receive your new computer or monitor with an original pixel fault. In most cases, these are dead pixels, and therefore, there’s nothing you can do except try and exchange your monitor with the manufacturer.

Keep in mind that these are just good practices that can extend the life of your LCD screen. Unfortunately, there isn’t a full-proof method to avoid getting stuck pixels.

Stuck pixels are the most fixable problems you can have with your pixels. A stuck pixel can disappear on its own, or you can use other methods to try to fix it – in this article, you’ll find some of them.

It depends on the class of monitor that you have – only class I monitors shouldn’t have any dead pixels. For other classes, most manufacturers will consider one dead pixel as acceptable. This means that they probably won’t replace your new monitor because of it.

Of course, if this acceptable to you, it’s a different matter. It often depends on the location of the dead pixel and the size of the monitor. If you find it unacceptable, you should still give it a shot at the guarantee and see if you can have it exchanged. Check the ISO 13406-2 to see the ‘acceptable’ standards according to the type of monitor.

No, dead pixels won’t go away on their own – most of the times, they’re not even fixable. Before you give up, though, make sure the pixel is really dead and not stuck – because stuck pixels can go away.

Dead pixels are more noticeable in light areas because they are black. Also, it depends on the size of the pixel, the size of the display and the resolution. Keep in mind that once you know it’s there, you’ll keep noticing it.

If your warranty is valid and you can get your device exchanged, that’s the best way to do it. Otherwise, determine what type of pixel problem you have.

There are a few different methods to try to fix stuck pixels – although none of them is certain. On the other hand, hot and dead pixels can’t be fixed.

I hope you found this guide helpful. If you have any questions or want to share some tips on preventing, detecting, and fixing faulty pixels, please leave a comment.

A dead pixel can be a huge pain, whether it"s on your smartphone, desktop monitor, or laptop. Fortunately, even though a dead pixel isn"t a great sign of monitor health, there are ways you can sometimes bring that pixel back to life.

If your device is no longer under warranty or you don’t want to take it to a professional, don’t despair. Here"s how to fix a dead pixel in just a few steps.

Step 3: Let the JScreenFix app run for at least 30 minutes. Drag the white noise window to where your stuck or dead pixel is located, and then let it run for half an hour. JScreenFix claims it can repair most stuck pixels in under 10 minutes, but giving it plenty of time to work never hurts. Try using it several times if the first run wasn’t successful.

Keep in mind that this method uses both HTML5 and JavaScript and may work with LCD or OLED screens. If it doesn’t work, though, you could always try one of the platform-specific tools below.

PixelHealer is an entirely free application from Aurelitec that fixes pixel problems. It’s compatible with Windows 7, 8, 10, and 11. Once downloaded, PixelHealer will present you with a colored box window and a settings menu. It is important to note, though, that users who are sensitive to flashing images should not look directly at the box/app window, because as the app runs, the window will then flash multiple colors in quick succession.

PixelHealer is more likely to work on a stuck pixel that shows signs of life than a dead pixel, which may stay unresponsive, but there’s a chance it can fix both, so give this dead pixel fix a try regardless of how your wounded pixel is behaving.

With such a straightforward name, you know that Dead Pixels Test and Fix (DPTF) is a quick and easy dead pixel fix for locating and potentially repairing dead or stuck pixels. It’s a free app and features an interface that is both self-explanatory and easy to navigate. DPTF assumes the same process as its competitor apps, using a series of solid color blank-outs on your screen to reveal damaged pixels.

The developers recommend that you let DPTF run for at least 10 minutes to fix all of the pixels, but we had better results when we left it running for a couple of hours so it had time to fix all of the dead pixels. You’re going to need to have a full battery or your device connected to a power source while you execute this tool.

DPT 2.20 – A Windows application to help locate and identify dead/stuck pixels. It also has a pixel exerciser built in to possibly get lazy pixels working again.

Apply pressure through the folded washcloth with the instrument to exactly where the stuck pixel is. Try not to put pressure anywhere else, as this may make more stuck pixels.

Remove pressure and the stuck pixel should be gone. This works as the liquid in the liquid crystal has not spread into each little pixel. This liquid is used with the backlight on your monitor, allowing different amounts of light through, which creates the different colors.

Display a black image, which will show the stuck pixel very clearly against the background. (It is very important that you are showing a black image and not just a blank signal, as you need the backlighting of the LCD to be illuminating the back of the panel).

Use the rounded end of the pen to gently tap where the stuck pixel is - not too hard to start with, just enough to see a quick white glow under the point of contact. If you didn"t see a white glow, then you didn"t tap hard enough, so use just slightly more pressure this time.

Display a white image (an empty text document, or sending your browser to about:blank and going to fullscreen with F11 is good for this) to verify that you haven"t accidentally caused more damage than you fixed.

This method is useful if large areas are discolored or even black. It works best with laptops, but it may work with separate monitors, too. By using this method, you are exposing your computer to the risk of damaging the processor and/or other components by overheating. If you do this, you should be willing to accept the loss of your computer (for laptops), or monitor (for stand-alone screens). You should backup your data before trying this method. In particularly bad cases of damage, the effect may not work completely, or the fix may not be permanent.

Close the laptop lid almost completely, but don"t let it close fully - This will keep the laptop screen turned on indefinitely. You may take a small paper pamphlet or something soft and place it on the keyboard to prevent gravity from closing the lid.

Let the computer sit for several hours or even days in this condition. You may check on it as frequently as you like. The heat generated will cause the liquid crystal to flow more easily into the areas that were not formerly filled.

If the pressure and tapping don"t work directly on the stuck pixel, start moving outward around the stuck pixel. If you see the pixel flicker while doing this then you know where you can focus the pressure and tapping techniques rather than directly on the pixel.

Many people report success with this technique, but these instructions won"t work in every case. It may take a few attempts to make sure you are pressing exactly on the stuck pixel. These instructions will fix "stuck" pixels, not "dead" ones. Dead pixels appear black while stuck pixels can be one

constant color like red, blue or green. An alternative, but similar technique involves gently massaging the stuck pixel with a warm damp (not wet) soft cloth.

If these instructions don"t work, you can hopefully get the monitor replaced through your manufacturer. If your monitor falls under the specifications of replacement, get in contact with the manufacturer to set up replacement plans.

LCD displays are composed of multiple layers. Each layer is separated by very small glass spacers. These spacers and the individual layers are very delicate. Rubbing an LCD panel with a finger or even a cloth can cause the spacers to break and cause further issues beyond the original pixel fault. As such, most repair technicians with service certifications are trained not to use the rub or tap methods - use them at your own risk.

Most LCD manufacturer warranties for LCD displays will cover replacement of the panel when the display reaches a certain number of pixel anomalies. These warranties, however, generally will not cover damage caused by rubbing the screen so use extreme caution and contact the manufacturer before proceeding to see if you qualify for repair or replacement.

Article provided by wikiHow, a wiki building the world"s largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Fix a Stuck Pixel on an LCD Monitor. Content on wikiHow can be shared under a Creative Commons License.

If you suspect you have one, but you aren"t sure, investigate more closely with tools like the Dead Pixels Test or CheckPixels.com. These programs often display solid colors on the entire screen, allowing your eyes to more easily pick out pixels that aren"t functioning properly.

Dead pixels can"t be fixed in most cases, but you can sometimes revive those pixels. We have a few solutions for you to try before you send your device out for repairs.

Dead pixels are not the same as stuck pixels. These pixels look almost the same, but there"s an important distinction. A dead pixel won"t turn on, whereas a stuck pixel is permanently on. Since it"s permanently on, it typically appears as a bright, persistent dot on the screen, and is either red, green, blue, or white. If a problematic pixel is dead, it should look like a small black rectangle.

The most common cause of dead pixels is a manufacturing defect. Undetectably small errors in assembly can result in a handful of dead pixels among the millions of functional ones.

It may go away on its own, but there"s no telling how long it will take. You might have the dead pixel for the remainder of the device"s life, or it might go away in a week.

Many manufacturers have warranties that cover dead pixels, so check your device"s warranty to see if this situation applies to you. Most display manufacturers require a minimum number of dead pixels before the screen can be replaced.

You can examine the dead pixel policies of Acer, Apple, Dell, LG, and Samsung, but the best source is always the device"s specific warranty documents.

You may come across other methods of fixing this problem yourself, including "pressure" and "heat" methods. We do not recommend trying these methods as they can make the problem much worse if not done properly!

There isn"t a lot you can do to fix dead pixels; most people tend to buy a new tablet, computer, or TV when pixels start going bad. If you"re not comfortable with replacing the screen yourself (most people aren"t), then the next step is to find a local repair shop if your device is no longer under warranty or break out the wallet.

By and large, dead pixels are considered to be fairly normal when it comes to LCD displays—for example, Dell says dead pixels are not uncommon. And the larger the screen, the less likely we are to notice a few dead pixels among thousands of active ones.

Everyone has their own opinion on what they consider "acceptable" when it comes to dead pixels, but generally it depends on whether or not you even notice them in the first place. But generally speaking, anywhere from one to five inactive pixels is considered okay according to industry standards.

Your monitor is made up of millions of pixels. Each pixel is a group of red, green and blue subpixels that combine to create the images you see on your computer screen. When a few are dead or stuck, it can be super distracting.

If you’re having trouble identifying them, though, we’ll show you some tools to use, then tips for ridding your monitor of these tiny little eyesores.

A dead pixel occurs when an entire pixel or a group of subpixels remain dark even when they’re supposed to be on. Since this implies that the pixel or group of subpixels are no longer powering on, they’re harder to fix than stuck pixels. In most cases, dead pixels are lost forever.

A stuck pixel occurs when one or two of the color subpixels remain activated even when they’re supposed to be off. For example, the blue subpixel might get stuck, so the entire pixel will display a different color than what is intended.

To see what’s going on, you can enlist software to help. Try a third-party download like InjuredPixels for Windows. If you’re on a Mac or don’t want to download anything, go with a browser-based solution like LCD DeadPixel Test.

Most monitor manufacturers have a return policy for dead and stuck pixels. They’ll usually replace a monitor if it has more than several pixels stuck in a single color or brightness setting. Since dead pixels are difficult to fix, replacing your monitor via the manufacturer’s warranty is your best route.

You can go the web browser application route with a site called JScreenFix. The free service claims to fix most stuck pixels within 10 minutes by using an HTML5 “PixelFixer” tool.

And since it’s HTML5 and JavaScript-based, there’s nothing to install. All you have to do is bring up the website, drag the PixelFixer window over the stuck pixel area then leave it on for at least 10 minutes.

After detecting your monitor’s stuck or dead pixels, use PixelHealer’s flashing color box on the affected areas to try and jolt the pixels back into shape. The site claims that the tool uses the already proven method of using flashing RGB colors to restore a stuck pixel or even revive a dead one.

If your monitor is out of warranty and none of the pixel fixing software methods are working for you, you have two choices. Either you learn to live with a few stuck or dead pixels here and there, or, if you’re brave enough, there’s a last-ditch method you can attempt.

First, take note of the location of the stuck or dead pixel. Then turn off your monitor and try applying gentle pressure on the affected area to “massage” it back to life. Use something with a narrow but flat edge like a pencil eraser or a pen cap. To avoid damaging your screen, wrap it with a soft, damp microfiber cloth.

The idea is that by applying gentle force, you might coax the pixel back into its proper alignment. If not done correctly, this method can actually create more dead pixels, and extreme caution is required.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

A stuck pixel on your screen is either unresponsive or doesn’t change its color when the screen refreshes. Pixel defects are pretty common in older monitors or LCD displays however they can also appear in newer displays.

Your display creates images using tiny pixels composed of three sub-pixels of red, green and blue color. There are other components like a TFT array which powers the liquid crystals.

A dead or stuck pixel may appear when any of these delicate components are damaged or the connection of the Liquid crystal to the electrodes array is broken. A manufacturing defect or physical damage to the Liquid Crystal layer can also cause dead or stuck pixels.

Before trying to fix stuck pixels, keep in mind that a dead pixel is different from a stuck pixel. A dead pixel has a very low chance of getting fixed. If your display has dead pixels and it’s still covered under Warranty then you should try getting it replaced or repaired by the manufacturer.

Every manufacturer has its own Warranty Policy for fixing or replacing screens with dead pixels. Most of them would replace your display under warranty period, if it has more than 5 dead pixels or sub-pixels. Some manufacturers offer to replace their premium display models, if they have even 1 dead pixel during the warranty period.

A dead pixel would always appear as a black or dark dot on a white background. A stuck pixel on the other hand either appears as a bright white, red, green or blue colored dot, depending on the stuck sub-pixel.

You can also type about:blank in your default web browser’s address bar and hit Enter. Press F11 key to go Full screen. Look for any dead or stuck pixel. Press F11 again to exit full screen.

Drag the square with the Static Animation over the stuck pixel and wait for a minute or two. Each pixel within the square is turned on and off at least 60 times a second.

If this didn’t work then, you can also try pressing the affected pixel with a blunt tip like a stylus or a cotton swab. This would put pressure on the connectors to the Liquid crystal layer and may fix the stuck pixel.

If your laptop or monitor is still under warranty, then try to get it repaired or replaced instead of trying to fix it with trial and error methods. However, if nothing works then you probably have no option but to ignore the dead pixel.

I am going to show you how to fix a stuck pixel on your LCD monitor. Stuck pixels are really annoying and just plain look bad. Over the past few years I have had to fix SO many stuck pixels. It"s not that hard to do and usually only takes a couple of minutes. Enjoy!

This will only work on LCD monitors, but this includes computer LCD monitors, laptop screens, cameras (the screen might have a hard protective shield over it that you will have to take off), and hand-held systems (will most likely have a hard protective shield). Does anybody know if this will work with an OLED screen? I think that it will, but I"m not positive.

Note: This will only fix stuck pixels. Not dead pixels or hot pixels. A dead pixel is when the pixel is always off. It is easiest to spot a dead pixel against a white background. The pixel will appear to be non existent. It will look darker than the stuck pixel in the image below. A hot pixel is when the pixel is always on. It is easiest to see against a dark background. The pixel will be bright white. A stuck pixel will usually the red, green, blue or yellow, but can also be a light black color (pictured below). A stuck pixel is caused by a manufacturing defect in which it leaves one or more sub-pixels permanently turned on or off.

By the way, the picture that I took is a bad example of a stuck pixel. Because it is black, one might think that it is actually a dead pixel but it is not. It just so happened that all of the sub-pixels in that pixel were permanently turned off. The next time I see a dead pixel on a computer that isn"t black, I will update the picture because the current one is a bad example.

This is the most traditional method. It fixes the stuck pixel by rapidly flashing different colors to try to get it to change. This method works very well, but if you do it for to long, it can actually create more stuck pixels. Get it here or download it below. The site claims that it can also reduce burn in on plasma displays but I have not tested it yet.

Open the java applet and resize it so that the window is very small. Now move the window over to where your stuck pixel is. Leave it be for five minutes than close the window and see if it"s fixed. If its not than repeat again for another five minutes. The site says that it may take up to 20 minutes but I have found that it usually works within the first 10.

This method is done by placing a damp (not wet!) paper towel over you monitor. Place your stylus or blunt pencil tip on the paper towel over where the stuck pixel is. You have to place it exactly on the stuck pixel. Now turn of your monitor and apply a small amount of pressure to the stylus / pencil. Wait two seconds and then turn your monitor back on. Your stuck pixel should be fixed! If it is not, try repeating but this time, apply a little more pressure.

This method works because a stuck pixel is a pixel in which the liquid in the liquid crystal has not or not completely spread to this pixel. The backlight uses this liquid and lets different amounts of light through. This affects the color of the pixel. The pressure helps the liquid in the liquid crystal move around.

This final method works but can easily create more stuck pixels or even do some real damage so be careful. First you need to display a dark color / image over your stuck pixel. (Make sure it"s really showing a dark color / image and not just a blank signal) Take the back of your stylus, or another small, blunt object, and lightly tap on the stuck pixel. You should briefly see a white spot where you tapped. If not, then tap a little harder. Keep tapping, each time tapping a little harder. This should only take about 5-10 taps. This should correct the stuck pixel. Be careful thought, because doing it too many times may cause damage to your monitor.

I have a new ASUS XG49VQ monitor, and I have had to return the first one due to over 20 stuck pixels. This one (monitor #2) had only one. So, I decided to live with it; that is untill this morning. I started to tap, then smack the side bezel of my screen. This seemed to move my stuck pixel. Then I smacked around more. This created more. I then started to flick my screen at each point. They started to subside. I then came across this instructible, and now I just have to press lightly on one that pops up and it fades back into submission. I suppose I found out why this ultrawide, entry level HDR monitor was only 799.99 brand new. LOL. Thank you for the advice, saved me from returning and getting a 3rd unit, or breaking down and just buy another monitor.

Hi, i have a question: can stuck pixels be fixed if they are all in a straight line that comes down across the screen? I m trying all these methods on my IMAC but its not working. Can you help me out?

Can you describe it more? Is it a vertical or horizontal line, or is it a diagonal line? Is it a solid line, or is it a bunch of stuck pixels that just happen to be in a line-like shape? If it is a solid vertical, or horizontal line, then it is a faulty lcd, and there is nothing you can do. Also, is your iMac the newer one that is aluminum and black? If it is, than the display has a glass/plastic plate over the lcd making method 2 & 3 useless.0

They can get some image retention in very odd situations... but it takes months and months of a static image for it to happen... while a plasma screen will have image retention in a matter of minutes.

99.99% of regular pc users would never notice image retention unless they never turned their monitors off and always left the exact image on the screens all day long 24/7 for years.

Plasma and even the newer OLED screens have it bad. Its why OLED"s high cost, and its poor pixel lifespan make it a fairly useless tech since for much less money you can get a mainstream LCD/LED display and with new tech like HDR, the contrast ratio is on footing with OLED but has the pixel life and almost zero chance of image retention, makes OLED very unwelcome unless it became cheaper than LCD screens.0

As others have mentioned this is either a video card issue or bad/dying LCD column driver. The latter are not fixable (to the best of my knowledge.) while according to the poster above the former are a silent recall issue for the iMac.0

This actually worked. I just noticed 4 dark/dead pixels on my screen (noticeable on a while image). I used that UDPixel program for around 30 minutes and it didn"t work by just using it by itself.

But i kept it running while also using a damp paper towl and used my finger and just rotated it around a bit on the pixel for a few seconds and it fixed all 4 dead pixels.

If it doesn"t work for you, keep trying and let your screen warm up a lot and run that pixel program to really work it up and use some massage action on the area with a bit of gentle pressure with your soft finger and see how it goes. I wouldn"t use a solid object. Your finger and paper towel is better because its nice and soft.

As some mentioned in other comments, if it happens again just keep doing it and it should go away again and is this is a very nice trick... My current monitor is a 2560x1080p LG ultrawide (34UM67). But i"ve got a really old 15 year old lcd monitor with a dead pixel i want to try this out and see if it works on it.0

I really had my doubts that this"d work, it"s a hardware problem, and a software generally cannot fix hardware-hence I tried the pressure methods first.

Tried the third method using a smooth metal pen button (the click-click one!), and it worked after a few taps! Thanks! Finally my 4-year black pixel went away! Bye bye!0

To begin with, we make use of a software tool to flash the pixel with multiple colors. We recommend using JScreenFix (All Devices), Pixel Repair (Windows), or Dead Pixels Test and Fix (Android).

Next, we try a manual method that involves rubbing the stuck pixel using an object with a blunt, narrow end, such as the tip of a pencil eraser or a phone stylus.

Modern LCD and OLED screens are made up of millions of tiny dots of color, called pixels. Each pixel is comprised of three subpixels (red, blue, and green) that mix together and produce various colors you see on the screen.

So, if you spot a stuck pixel on your laptop or phone screen, don’t go sending it for costly repairs or buying a new one just yet! Fortunately, there’s an incredibly simple fix that will likely get rid of any stuck pixels within 20 minutes.

We make use of screen-fixing software that plays a random combination of red, green, and blue hues at a very high rate in an attempt to correct the stuck pixel back into its usual cycle.

Hazard Notice! Since screen-fixing programs display rapidly flashing lights in an erratic fashion, you’ll want to avoid looking at the screen when the program is running. People suffering from seizures or with a family history of epilepsy are strictly advised not to stare at the flashing screen.

JScreenFix reports a success rate greater than 60 percent in restoring the stuck pixels. Try using it a couple of times if the first run wasn’t successful.

The Dead pixels locator section is useful in identifying the stuck or dead pixels. It features eight color buttons that display different colors on the screen.

Get yourself an object with a blunt, narrow end, such as the tip of a pencil eraser or a phone stylus. You can even use the tip of a folded soft cloth.

Using the object, apply gentle pressure to the area where the stuck pixel is present. Turn off your screen, wait for 5 seconds and turn it back on while still applying the pressure.

Hold the bag against the stuck pixel and apply gentle pressure. Make sure not to hold the bag against the pixel for more than a few seconds at a time.

Note – Understand the risks associated with these methods. While many people have reported successfully repairing their stuck pixels by applying pressure on them or using heat, doing so at times can harm your screen and void warranty.

If your device is new, check your manufacturer’s warranty for information about the return or replacement policy. Many manufacturers offer a repair or replacement for screens with a certain number of stuck or dead pixels.

The first thing you do when you purchase a new smartphone, laptop or LCD TV monitor is to check for dead pixels. More often than not, if you purchase a branded product such as Dell Monitor or Asus Laptop or Samsung Smartphone, you are guaranteed a 1 for 1 exchange during the warranty period. This cannot be said if the said item is of generic brand. Without further ado, here are 6 free tools to detect and fix dead or stuck pixels.

A stuck pixel is a bright dot of colour that fails to update when neighbouring pixels change. Stuck pixels are most noticeable when the rest of the screen is black. Stuck pixels are different from dead pixels. A stuck pixel is a single color – red, green, or blue – all of the time. A dead pixel is black instead. While it’s often possible to “unstick” a stuck pixel, it’s much less likely that a dead pixel will be fixed. While a dead pixel may simply be stuck at black, it’s possible that the pixel isn’t receiving power at all. A faulty pixel displaying the color white all of the time is known as a “hot pixel.”

DeadPix is an application that can help you fix pixels that are stuck on your screen. You can download the installer or download the portable version below. It’s also completely free! It can fix stuck pixels by rapidly cycling the color value of the stuck pixel. Please note that this tool does not provide a 100% success rate.

Try to fix dead, stuck or hot pixels by yourself, before running back to the store! PixelHealer uses the already tested concept that flashing RGB colors over a dead or stuck pixel will revive it. PixelHealer can help you try to fix dead pixels by yourself, before running back to the store! You can use it to fix dead, stuck or hot pixels on LCD or TFT screens, on desktop monitors, laptops or tablets.

First of all, use our own free InjuredPixels portable app to check your screen or tablet for dead, stuck or hot pixels. Then, download and run PixelHealer without installation, cover the dead pixel with the colored repair window, and click Start Flashing. PixelHealer uses the already tested concept that flashing RGB colors over a dead or stuck pixel will revive it. So let the repair window run for a while, then check to see if the dead pixel has been fixed or revived. And repeat the process if necessary.

PixelHealer has an intuitive interface and it is very easy to use. Use the mouse or your finger to move or resize the repair window. Open the intuitive Settings window to change the flashing colors, the flashing interval, or to automatically close the app after a certain period of time.

InjuredPixels allows you to easily check for defective (hot, dead or stuck) pixels on LCD monitors. InjuredPixels can be used to test a new LCD monitor before purchasing, or an already purchased monitor during the warranty period (as you may get a replacement according to the manufacturer’s dead pixel policy). InjuredPixels fills the entire screen with a primary or custom color, allowing you to inspect the screen for pixels that do not match the selected color.

The program is easy to use: click or use the arrow keys to cycle through colors or right-click to get the menu with the main commands. InjuredPixels can be run directly without having to install it on your computer: just download the portable version and run.

The JScreenFix pixel fixing algorithm has been applied to over four million screens and is the most effective software solution available for repairing defective pixels. JScreenFix is a web app that’s very similar to PixelHealer, except that you don’t need to download anything to use it. That makes it suitable for a wide variety of platforms, and it’s notably the best solution for iOS and Mac devices at the moment. Works great on Microsoft’s Windows 10 and Apple’s macOS.Fixes most screens – Suitable for LCD and OLED. >60% success rate.

This is a simple test designed to make it easier to detect LCD “dead pixels” (pixels that are either stuck-ON or stuck-OFF) by displaying a series of solid background color pages for contrast.

Have dead or stuck pixels on your laptop screen or retina display? Keep replaying this video until the dead pixel or stuck pixel has been repaired/unstuck. This video fixed the stuck pixels on my Macbook Pro’s Retina display (UHD 4K), Though be warned it can take hours depending on the pixel.

If this method doesn’t work for you, Google the pen tip pixel method or contact the manufacturer of your display. This video should also work on smartphones, iPhone, iPad and tablets! Seizure warning – Do not watch the screen! Turn the screen away from you if possible and allow the video to run to the end, repeat the video if necessary.

Pixel combines two words, ‘ pix’ (picture) and ‘el’ (elements). Pixels can be referred to as ‘dots’ or squares, and these are the basic building blocks of a digital image. When lots of these tiny dots/squares are put together, they form a digital image. Every single pixel has three sub-pixels in red, green, and blue color. Transistors carry electric current to the sub-pixels; this current is why the change of color changes in pixels.

Pixels compose the images displayed on the computer screen, television, laptop, video games, smartphones, and the list goes on. A pixel is the smallest controllable element of an image or display that a computer can print or display.

The way the app works is quite simple: it basically fills the screen with the color selected by you, thus making any dead or stuck pixel clearly visible. It is recommended to experiment with several colors, as you might not notice the broken pixels from the first attempt – you can go with one of the default colors (black, white, red, green or blue) or you can specify a custom one. You can also set Dead Pixel Buddy to automatically switch between colors as often as you like – just modify the Time Cycle value and you are set.

Have you ever noticed that a pixel – a little dot on your computer’s LCD monitor – is staying a single color all of the time? You have a stuck pixel. Luckily, stuck pixels aren’t always permanent.

While it’s often possible to “unstick” a stuck pixel, it’s much less likely that a dead pixel will be fixed. While a dead pixel may simply be stuck at black, it’s possible that the pixel isn’t receiving power at all.

Do you have any dead pixels? It can be hard to tell. The easiest way to notice is by making the screen a single color. To easily do so, use the Dead Pixels Test website – click the links on the page to open a new browser window with the color and press F11 to make it take up your whole screen. Try several of the links to ensure you notice the pixel, no matter what color it’s stuck at.

Of course, a speck on your screen may in fact be a piece of dirt or dust – run your finger over it (gently!) to make sure. if it doesn’t move, that’s a stuck (or dead) pixel.

So you’ve got a stuck pixel – what now? There are some purported ways to fix a stuck pixel, although there’s nothing definitive. This is the computer monitor equivalent of banging on the side of your television (no, don’t hit your computer monitor!). Whether any of these methods will work depends on what exactly is wrong with the pixel, so there are no guarantees.

Use software. Yes, this is a hardware problem – so how will software fix it? There are software programs that rapidly change colors, cycling through a variety of colors on your screen. If a color-cycling window is placed in the area of the stuck pixel, the program is constantly asking the stuck pixel to change colors. Some people have reported this can help unstick a stuck pixel.

Try UndeadPixel (UDPixel) if you’re looking for a program that does this. It has a built-in stuck pixel locator that cycles colors on your screen. Its main tool will give you a little flashing dot that you can drag and drop anywhere on your screen – drag it over the dead pixel and let it run for at least several hours.

Press on the pixel. Some people report that pressing and rubbing on the pixel can help reset it. If you’re pressing and rubbing, try using something that won’t damage your screen, like a microfiber cloth – and don’t press too hard! Some people also report that tapping on the screen with a blunt, narrow object like an eraser nub or the cap of a sharpie (it may be a good idea to wrap it in something like a microfiber cloth, too) can help. Again, be careful – don’t apply too much pressure or use anything sharp; you could easily damage your monitor and end up wishing your only problem was a stuck pixel.

Unfortunately, a single faulty pixel may not be enough to get service under warranty – even if you’ve just recently purchased your computer. Different manufacturers have different policies for dealing with stuck or dead pixels. Some manufacturers will replace a monitor that has even a single faulty pixel, while most manufacturers will require a minimum number of faulty pixels before offering warranty service.

You may need to have at least five stuck pixels on your screen before your manufacturer will replace it under warranty. For more details, consult the warranty information that came with your laptop or computer monitor or contact the manufacturer.

A perfect scratchless LCD screen, so clean you could eat of it… wait a minute! What is that bright spot in the middle that remains frozen on the screen? That bright spot is a stuck pixel and it is a commonly noted problem amongst LCD monitors. To learn how to get that annoying spot off your LCD screen, scroll below.

The LCD monitor is a breakthrough in display technology, as its display has a crystal-clear sharp quality with vibrant colors and graphics. Plus LCD monitors have a very slick-and-slim profile, that allows for portability and convenience as opposed to heavyweight CRT monitors. But a common problem faced with most LCD monitors is pixel defects and one such defect is a stuck pixel. Each point on an image is called a pixel, so to display an image, each pixel must turn a particular color and must change colors to display different images. A stuck pixel does not change its color according to the image being displayed. It will stay blue, green or red, irrespective of the picture being displayed. This can occur only in certain applications or the pixel can be stuck throughout. Some LCDs can go for years without a stuck pixel showing up but yet some brand new monitors can have stuck pixels in them after a few days of use. Stuck pixels are not dead pixels, which permanently remain off and show up on screen as a dark spot or dot. Cleaning the LCD monitor will not make stuck pixels go away, so read on to learn how to fix a stuck pixel on an LCD monitor.

Caution: The following methods are not guaranteed solutions to fixing a stuck pixel. Different models and brands of LCD monitors have different internal fixings and ways of working, so results may vary. Sometimes the method may work temporarily but once the screen is left off for sometime, the pixel will once again “stick”. This site does not guarantee the effectiveness of any method, so follow any steps at your own risk. It is recommended that if your LCD monitor is still under the manufacturer’s warranty, then please refer to their expertise prior to trying any self-help methods.

Place the washcloth on the spot where the stuck pixel is. And place the pointed end of your poking tool on the washcloth, to poke the stuck pixel. Try to poke the exact spot of the stuck pixel and not any other area.

Stop pressing the screen and take out the washcloth, the stuck pixel should be gone. An LCD screen has liquid crystal distributed to each pixel. This method redistributes the crystal in the stuck pixel’s area and it moves around to recolor the stuck pixel.

This method involves keeping the LCD monitor on. Your computer should be on as well. Open a black colored image file on your computer or set the background wallpaper to it. This will highlight the stuck pixel. A dark image will not do, only black will show the pixel. You can also open the program Paint, fill an image with the color black and keep the file open.

Use the rounded end of the tool to gently tap the stuck pixel. Start out slow and gentle, when you tap, a small white glow will appear at the point of tapping. This is the correct amount of pressure.

Keep tapping at this pressure, about 5-10 taps exact on the pixel should be performed. Be careful you don’t tap anywhere else, you could end up causing another stuck pixel.

To see if the pixel is fixed, you need a completely white background. So either open a text document or a blank web page in full screen or change the background image to a white image. If the pixel is not fixed, do not try the tapping method so soon. Too much of such tapping on the monitor could damage it.

There is always a handy software or program around to serve any need and a stuck pixel on an LCD screen is no exception. Certain software, some free and some paid, will rapidly adjust and flash various colors on the screen in an attempt to “unstick” the stuck pixel. Do not keep running the programs, if at first the pixel is not fixed, then wait for a while and try a different program. Some programs need you to select the stuck pixel, some will automatically detect the broken pixel or pixels. The following are a few programs available online:

Whatever you do, do not open the monitor casing in an attempt to fix the pixel. Fiddling with internal monitor parts to fix 1 or 2 pixels can damage the monitor completely. Do not get water on the monitor. If left alone for sometime, stuck pixels can become right, so sometimes leaving it alone can resolve the problem.

A defective pixel is a pixel on a liquid crystal display (LCD) that is not functioning properly. The ISO standard ISO 13406-2 distinguishes between three different types of defective pixels,

Similar defects can also occur in charge-coupled device (CCD) and CMOS image sensors in digital cameras. In these devices, defective pixels fail to sense light levels correctly, whereas defective pixels in LCDs fail to reproduce light levels correctly.

A dark dot defect is usually caused by a transistor in the transparent electrode layer that is stuck "on" for TN panels or "off" for MVA, PVA, and IPS panels. In that state, the transistor places the liquid crystal material so that no light ever passes through to the RGB layer of the display.

A bright dot defect or hot pixel is a group of three sub-pixels (one pixel) all of whose transistors are "off" for TN panels or stuck "on" for MVA and PVA panels.

A tape automated bonding fault (TAB fault) is caused by a connection failure from the TAB that connects the transparent electrode layers to the video driver board of an LCD.

TAB is one of several methods employed in the LCD-manufacturing process to electrically connect hundreds of signal paths going to the rows and columns of electrodes in layer 6 (the transparent electrode layer) in the LCD to the video integrated circuits (ICs) on the driver board that drives these electrodes.

If an LCD is subjected to physical shock, this could cause one or more TAB connections to fail inside the display. This failure is often caused by horizontally flexing the chassis (e.g., while wall-mounting or transporting a display face up/down) or simple failure of the adhesive holding the TAB against the glass. TAB faults require the replacement of the LCD module itself. If these connections were to fail, the effect would be that an entire row or column of pixels would fail to activate. This causes a horizontal or vertical black line to appear on the display while the rest of the display would appear normal. The horizontal failure runs from edge to edge; the vertical failure runs from top-to-bottom.

A stuck sub-pixel is a pixel that is always "on".RGB layer. Any given pixel will stay red, blue, or green and will not change when attempting to display an image. These pixels may only show up using certain applications

In LCD manufacture, it is common for a display to be manufactured with several sub-pixel defects (each pixel is composed of three primary-colored sub-pixels). The number of faulty pixels tolerated before a screen is rejected, is dependent on the class that the manufacturer has given the display (although officially described by the ISO 13406-2 standard, not all manufacturers interpret this standard the same way, or follow it at all).

Some manufacturers have a zero-tolerance policy with regard to LCD screens, rejecting all units found to have any number of (sub-)pixel defects. Displays meeting this standard are deemed Class I. Other manufacturers reject displays according to the number of total defects, the number of defects in a given group (e.g., one dead pixel or three stuck sub-pixels in a five-by-five pixel area), or other criteria.

In some cases, a manufacturer sends all screens to sale then replaces the screen if the customer reports the unit as faulty and the defective pixels meet their minimum requirements for return.