museum touch screen monitors factory
Museums, art galleries, and special exhibits are using an ever-increasing number of LCD video monitors and touch screens. Use LCD monitors to update or enhance exhibits with live video clips. Similarly, some cycle through a series of still images. Additionally, in attempts to provide a historical perspective, they often choose to use 4:3 aspect ratio monitors.
Firstly, TRU-Vu also provides 4:3 monitors (square monitors) to mimic old television sets. Secondly, show classic films without distortion or annoying black bars. Furthermore, the aspect ratio of a LCD display is the proportional relationship of its width compared to its height. The two numbers are commonly separated by a colon. The most common aspect ratios are 16:9 (aka widescreen) and 4:3 (aka square monitor, such as old CRT’s and TV’s). It is best to choose a monitor with the same aspect ratio as your video signal. However, you cannot customize a monitor’s native aspect ratio, so it is critical to know the aspect ratio of your incoming video signal beforehand.
For more modern displays, TRU-Vu provides 16:9 aspect ratio widescreen monitors. These provide the advantages of higher-resolution, digital video inputs, wider viewing angles, and greater longevity.
High brightness Sunlight Readable displays are used in outdoor or very brightly lit indoor areas. With over 1,000 nits of brightness, TRU-Vu Sunlight Readable displays are four times brighter than typical LCD monitors. These high brightness monitors are also used to produce stunning images with maximum visual impact in indoor areas, where maximum impact is desired. TRU-Vu Touch screen monitors are used for interactive displays, control, ticketing kiosks, or communication. Museums choose industrial-grade monitors and touch screens due to their ability to withstand abuse from high numbers of users and their long expected life cycle.
Museum curators often have very specific design concepts for their unique new displays. TRU-Vu Monitors has partnered with numerous prestigious museums and exhibit houses throughout the U.S. and Canada to produce one-of-a-kind custom monitor solutions. These have ranged from modern LCD panels housed in traditional CRT-type enclosures, to traditional 4:3 aspect ratio monitors with modern digital interfaces and state of the art controls. See some of our most recent collaborations with others in the industry.
Museum curators strive to make their exhibits as authentic to the specific time-period as possible. TRU-Vu has provided a wide range of custom LCD monitors, high brightness Sunlight Readable monitors, touch screens, and custom retro-look monitors to help achieve that goal for museums throughout the country.
A recent project for the Museum of Modern Art (MoMA) was to integrate the benefits of the latest LCD monitor technology (superb image quality, 178° x 178° wide viewing angles, HDMI digital video inputs, etc.) into a more traditional 4:3 aspect ratio monitor. The curators wanted to match the LCD display screen size to their media’s native 4:3 aspect ratio in order to display the fully scanned film image without distortion or pillar-boxing.
TRU-Vu has also provided numerous other custom monitors and touch screen solutions for a wide range of museums, art galleries and special exhibits. We have provided custom LCD displays with rugged durability, improved LCD image quality, and digital video inputs inside of a retro-look CRT-type square monitor enclosure. The results were amazing.
TRu-Vu also offers Touch Screen Monitors,Displays, Open–Frame, and 4K Displays. They are all available with 4:3 aspect ratio or 16:9 aspect ratio screens, and standard brightness or Sunlight Readable with at least 1000 nits brightness. All monitors can operate on 12-Custom OEM LCD Displays. Private Label Monitors is also an option. Sort by size of 7-12″, 13.3-19″, 21.5-65″ Industrial Monitors and Touch Screens. TRU-Vu Monitors also offers a wide range of LCD monitor mounts and stands.
The Pro is Ideum’s most powerful high-performance interactive table. It has a workstation computer and options for expandability. Quality built with an all-aluminum frame, it has a patented design and uses the best available commercial components. Available with 49", 55", 65" and 75" 8K touch display configurations.
Something we’re asked quite often over here at blackbox-av is “what’s the best type of touchscreen technology for use in a museum/heritage environment”, so we thought why not write a post that answers that question!
There are currently 4 main categories of touchscreen technology, Capacitive, Resistive, Surface Acoustic Wave (SAW) and Infrared. Although there’s a new kid on the block called Optical Imaging which is gaining in popularity but hasn’t really taken over the more conventional technologies yet, you should certainly watch this space though.
A capacitive touch screen is a control display that uses the conductive touch of a human finger or a specialized device for input.When a capacitive panel is touched, a small amount of charge is drawn to the point of contact, which becomes a functional capacitor.
The change in the electrostatic field is measured to find the location. In some designs, circuits located at each corner of the panel measure the charge and send the information to the controller for processing. In multi-touch screens, sensors are arranged in a grid to enable more complex input.
With resistive technology the main screen is covered with three layers. Two layers are placed over the screen and kept slightly apart, one is conductive and the other resistive, when the screen is touched these panels are pushed together registering the input. A scratch resistant surface completes the setup.
The best thing about resistive touchscreens is their ability to register inputs from any object, be it your finger, a pen or a gloved hand. They are also more accurate than other systems although more prone to damage and less responsive to a lighter touch.
When most people think of Infrared touchscreens they think of the classic 1980’s computers with orange/green text and a massive frame around the monitor, the fact is this technolgy still very much has a place in the modern world, it’s one of the more robust options and works by simply setting up a pattern of criss crossing infrared that when broken registers as an input.
There are a number of drawbacks to this technology however, for example bright lighting can interfere with the beams, as can dust and dirt. It’s most useful for applications outdoors where it can detect any input and not just a ‘conductor’ such as a finger (not in a glove!). However for the average indoor museum exhibit it’s a strong option.
This technology utilises ultrasonic waves that are projected over the front panel, when the panel is touched some of these waves are absorbed and receivers register this change while controllers pinpoint where it happened.
If the panel is touched by a finger which then remains motionless, only the initial touch is registered, this can be a positive or negative depending upon the application, for example it can have an effect on the software used with the screen but makes it perfect for use as a workstation where objects are likely to be rested on the panel, such as a hand or elbow etc.
Until recently this could be a tough question to answer, due to technological restrictions and costs involved, the question of “which touchscreen technology is best for the public environment?”could havebeenanswered in various ways, with the ultimate decision depending on a number of factors.
These days however thanks to technological innovations the answer is practically always Capacitive, there’s a reason almost all modern tablets and phones use this technology. On a larger scale this was once more expensive, so for touch tables you might have been tempted by another option such as Infrared however this is no longer the case.
The only time you will want to use a technology other than Capacitive, is if your touchscreen needs to allow gloved use… for example a touchscreen kiosk installed in an arctic research base…
The 22″ All-In-One Touchscreen/PC provides a simple yet elegant interactive platform for use within public displays. Contending with a separate PC and screen and all the associated cabling can be a thing of the past. This unit is easily installed via Vesa Mount fixings or the (removable) panel fixing wings which make it perfect for custom installations. Build it into practically any unique displays easily and quickly.
Free Standing Multi-Touch Kiosks from blackbox-av combine uncompromising technical performance with outstanding design, elegance and style to provide stand-alone, finger controlled, multi touch interactivity and information to visitors on demand. This is the 22″ ‘Modern’ version in our Free-Standing Range. The Kiosk works perfectly with our off-the-shelf multi touchscreen software, Lightbox 3 (perfect for museum environments).
By combining precision touchscreen technology within a professional-grade large format LCD panel this kiosk is ideal for use in high traffic public access environments. Utilising Capacitive touch technology to ensure reliability throughout extended use, the screen supports up to 10 touches and gesture controls.
Engage visitors with our elegant and ‘Sleek’ range of Multi-Touch table. Choose from a 46″ or 55″ multi-touch screen housed in an attractive white or black table unit. Thanks to the powerful inbuilt computer this system is able to run any windows 10 multi touchscreen software including off-the-shelf solutions such as our very own Lightbox 3 software or any bespoke interactives developed for your chosen application.
What use is a touchscreen without software to use with it? Which is why we not only supply cost effective hardware options, but have also developed Lightbox 3, our multitouch off-the-shelf interactive software package perfect for use in Museum environments.
Exactly. These analog control panels had been facing challenges in working efficiency and investment cost. As touch screens have been introduced, the control system became much easier to use. Touch screen display shows not only switches and lamps, but also graphics, characters and/or alarm signals. So, factory workers are able to check the operation status at the same time as operating the control equipment. In addition, touch screen saved space and costs by eliminating switches, buttons, and wiring.
To help guide and educate visitors through their current exhibits, MCA have integrated the InTouch 22” and 32” touch screens throughout the museum. Every detail of the museum’s appearance is important, and the attractive pure flat edge-to-edge industrial glass and brushed silver trim fit nicely into the building’s newly renovated style.
We’re proudly Australian owned and operated, offering local support and expert advice. With extensive experience delivering and supporting hardware solutions to some of Australia’s leading companies, our local manufacturing strategy gives us full control of the quality, timing and customisation which ensures a smooth roll-out every time. Many of Australia’s leading museums have chosen to work with InTouch for their touch screen solutions.
Teguar provides touch screen computers and monitors that are built to last, even in the harshest settings. With durable, IP65 rated front panels, Teguar Interactive Displays are ideal for touchscreen applications in public areas, such as restaurant ordering boards and interactive venue maps. They are also suited for applications in high traffic areas where hundreds of users may interact with the touchscreen daily, including employee clock-in/out and interactive room signage. For outdoor interactive displays, Teguar has computers that are fully waterproof, have high-brightness screens for readability in sunlight, and can operate in a wide temperature range.
Interactive displays can come in two forms: all-in-one panel PC, or rugged box PC plus industrial monitor. Both forms provide high processing power and rugged bezels. Teguar provides interactive displays that are fanless and fully sealed, allowing them to function in dusty or dirty environments and protecting the system’s internal parts from sprays or spills. Teguar industrial computers are available with resistive touchscreens, which are highly durable and will register touch, even if the user is wearing gloves. Or, Teguar’s panel PCs can have a projective capacitive touchscreen, which allows multiple users to use the touch screen at once.
Teguar’s interactive displays can be found all over the world in settings including museums, amusement parks, conference rooms, restaurants, and even inside a monkey habitat, where primatologists are using innovative touchscreen technology to research and interact with primates. Whatever your application, Teguar has an interactive display that can provide a long-lasting, reliable solution.
A touchscreen media kiosk developed for museum patron interaction and information display. The screen angle is adjustable to allow for users of all heights.
Transport Information More Effectively with Interactive Digital Signage Touchscreen Solutions for Museums, Galleries, Science Center. XXL MultiTouch Screens, Tables, Walls & Kiosk Terminals with Customized Software and Innovative Technologies.
If you’re the owner or manager of a museum, you should know that that installing interactive screens throughout your museum will make the information presented more accessible, more interesting for young people, and more modern. Visitors at your museum will take note of how convenient and easy it was to navigate and understand each exhibit with the help of your interactive touch screen solutions.
Imagine being able to explore the history of each exhibit through the combination of a variety of media. There’s no limit to what you can do with touch screens for museums by Digital Touch Systems. Our touch systems allow total synchronization among all devices, and integration of fully customized features.
However you want the software for your digital screens to work, we can accommodate you with them. Our talented and hardworking touch screen software development crew can make your ideas come to life. Your logo and museum name can be included in each page of your personalized touch screen software. If you choose, you can communicate directly with our touch screen software team to make sure they add all of the functions you want and design it the way you like it.
We can deliver all products straight to your museum. Setting them up takes only minutes. They will include all mounts and everything you need for installation. At Digital Touch Systems, we stand by the quality of our products. Let us provide you with touch screens for museums that bring your displays to life! Take the first step and contact us today!
The first “Digital Totem” installed in the New York City museum will showcase the modern people, languages, and histories of cultures of the Pacific Northwest, including the Kwakwa̱ka̱’wakw, Haida, Nuu-chah-nulth, Musqueam, Gitxsan, Tlingit, and Tsimshian communities.
Self-supporting MultiTouch Videowalls with up to 12 meters length and customizable in the matter of shape and colors. Perfect for trade shows and permanent installations.
Wall-mounted Interactive Videowalls for boardrooms and corporate environments. These Touchwalls are height-adjustable and can be maintained from the front!
Museums worldwide often struggle to gauge interest for their exhibits, finding it hard to make relics of the past interesting to the young generation.
A simple yet effect idea is transparent interactive panels instead of glass. This allows the precious relics to stay protected behind glass as well as allowing the visitor to interactive with the exhibit with historical content and information designed on screen.
Diversified was commissioned for the installation, testing and provision of the audio visual hardware for the exhibition and supplied and designed the AV control hardware, software and programming, visual displays, zoned hi-fidelity recorded sound reticulation, sound and video playback devices, and interactive touch screen tablets.
To ensure we are covering all businesses’ needs, Panasonic is delivering different technologies embedded in our professional multi-touch screen displays.
We are offering interactive screens with whiteboard functionality that can be used for collaboration and Bring your own device (BYOD) environments including classrooms, seminar rooms, meeting rooms, offices, lecture theatres presentation rooms.
In addition our intuitive and robust touch screens are designed to interact with your audience or visitors and withstand challenging environments such as retail, transportation, live entertainment.
To create the highest impact and interactivity, the ShadowSense technology can also be embedded in flexible video walls installations ideal for retail, museums or even corporate environments.
How does it work? The bezels around the edge of the screen house infrared receivers and transmitters. When a finger is placed in the (invisible) beam of IR light, the finger’s position is calculated.
Will not fail if portions of the screen are blocked, or if individual components fail. This high level of reliability reduces touch screen failures that bring about unresponsive touch screens, to virtually zero.
The multi-touch video wall solution is fully customised on your needs and is composed of multiple 55" screens built-up in different configurations. Installation of the touch overlay is included in a service package and is made on site.
Durable and highly accurate touch technology Video Wall solutions with various configuration possibilities. Ideal for corporate, retail and museums environments