brother printer lcd display not working manufacturer

Verify the power cord is connected to the back of the machine and the AC power outlet. If the power cord is connected to a surge protector or power switch, remove the cord from the device and connect it directly to the outlet. This is for testing purposes. Removing the device assists in determining if the issue is related to the device or the Brother machine.

Verify the machine is powered ON. The Brother machine has an ON/OFF button located on control panel of the machine. If machine is OFF, the display will be blank.

If the display is still blank, try to tilt or move up or down the LCD display and also try a different known working electrical outlet at your location.

4. When the screen is blank but power LED light is on, this is a sign the firmware has been corrupted. This can happen if power or network connection is interrupted before the end of the firmware update. The firmware can be recovered provided the printer is connected to a computer via printer USB cable and the computer shows the printer is connected.

1. The Brother machine has an ON/OFF button located on the top left side of the machine above the button labeled WiFi. Verify the machine is powered ON.

NOTE: Due to the design of the control panel display, looking at display from certain angles can cause the display to appear blank or light. Stand where you can look at the machine display at a 45 degree angle.

5. If you are having difficulty reading the information displayed on the LCD or it"s too light, try changing the contrast setting. Adjusting the contrast will give the LCD a sharper and more vivid appearance.

1. When the Brother machine is idle for a certain period of time, it enters Sleep Mode. In Sleep Mode, the machine acts as though it is turned off and its LCD will be blank. If you press a key on the control panel, the machine receives a fax or computer data, or you make a copy, the Brother machine will wake up.

- If the Brother machine"s LCD lights up and displays the home screen, the issue is resolved. For more information about Sleep Mode, refer to the solution: "Can I adjust my Brother machine"s Sleep Mode setting?"

- If the LCD is still blank, cycle the power by unplugging the power cord from the outlet, waiting 5 seconds and then plugging the power cord back into the outlet.

2. If the power cord is connected to a surge protector or power switch, remove the cord from that device and connect it directly to an outlet. This is for testing purposes. Removing such devices assists in determining if the blank LCD is related to the device or the Brother machine.

NOTE: To protect your investment against power surges and lightning, Brother strongly recommends that you connect the Brother machine to a surge protector. In particular, we suggest you use a surge protector that is compatible with both standard A.C. power cords and telephone line cords. Surge protectors equipped with telephone jacks will assist in insulating the machine from any power surge that might travel through a telephone line.

My LCD screen is shown blank without any single word display on the screen, it still can print if the printer network can be set to proper wifi id. But, in this case the LCD screen is blank and showing nothing, so i can not set to any wifi id at all.

How to Fix Brother Printer Touch Screen not Working Error? –Brother Printer is one of the leading tech gaints in the world. The printer is famous for its amazing features and printing quality. However, like other brands, Brother printers also faces technical issues sometimes due to negligence of the user or other reasons. We all know the fact that printers are one of those devices that work on both hardware and software parts. Both of them have their own problem and they are fixed by various methods. Therefore in this blod we are here to provide you the step by step guide on How to Fix Brother Printer Touch Screen not Working Error?

Most of users got panic when they find out that the touch screen of the Brother printer is not working. If you are the one whose Brother printer touch screen suddenly stops working then don’t get frustrated. As we are here to guide you to fix the issue. Read our blog that comprises of the answer of most asked quesstion by the user i.e, How to Fix Brother Printer Touch Screen not Working Error? Our team of experts have sound experience in providing the best possible solutions.

Get in touch with us by dialling our toll-free numbber 800-742-9005 or you can also mail us at support@techsupportexpert.com. We are availabel 24/7 for our valuable customers, therefore connect with us anytime and fix your Brother printer issues by sitting at your place.

Generally the Brother printer touch screen error occurs because of the worng configuartion and it can be fixed by some easy methods. But before following those steps don’t try to do any sort of manually fixing.

Whenever you get stuck in between any Brother printer, this is the first step to fix the problem that you must perform. Press the printer power button and turn it off. After that wait for 60 seconds. Now you need to press the printer power button again. Next try to use the touch screen. If the touch screen is not responding then move on to the next step.

Most of the times due to connectivity issue between the printers power cord and surge board, the touch screen stops working. In order to fix this issue, first of all turn off the printer and then disconnect it from the surge board. Then connect the printers power cord with the main power outlet directly. At last, check whether the Brother printer’s touchscreen issue persists.

The next step is to fix the touchscreen of the printer by reseting it. To perfrom this step, firstly turn on the printer by pressing the power button. After that disconnect the power cord from the back side of the printer. Then wait for few minutes. Now reconnect the power cord at the back side and then turn on the printer. Next see that the touchscreen is working or not.

More often the touchscreen fails to respond because of the outdated or corrupted drivers. You can fix them by updating the printers drivers. Follow the steps to update the printer driver:

The last step that you can perfrom to fix the Brother printer touch screen is firmware update. It is one of the significant part of the printer’s software and if it is not updated properly then you can face lot of troubles.

Therefore fix the issue by updating the printer to its latest firmware version that you will get from the official website of the printer manufacturer. At last verify the touch screen issue.

If the touchscreen issue still persists in the Brother printer then connect with Tech Support Expert. We have a team of skilled and qualified professionals who make sure that you get the right solution of your printer issues. You can reach to us anytime through toll-free number or Live chat. Call us anytime at our toll-free number800-742-9005.

The LCD screen is vital for operating the printer. Should you encounter any kind of trouble, such as a dead screen, corrupted text, or other issues, please refer to the guide below.

First of all, unscrew the LCD screen from the printer frame, remove both M3x10 screw holding it the LCD board in the plastic casing, and remove it from the casing. See if the problem still appears when the LCD is not pressed by the casing.

Firmware updates are necessary to keep your printer up to date. However, the installation of incorrect firmware can lead to letter corruption on the LCD screen. There"s an easy fix, though:

There is a small chance the printer"s LCD screen can glitch out by electrostatic discharge when inserting the SD card. Try to turn the printer off and on again.

This problem usually appears only on user-assembled printers. If your printer"s LCD screen remains blank or displays corrupted symbols after you turn on the printer, there is a chance it is caused by incorrect wiring. Follow these steps to fix the issue.

Double-check that all cables are properly seated and they are not visibly damaged. Depending on the model of your printer, please refer to the following guides for information on how to make sure the cables are properly connected: Einsy RAMBo electronics wiring (MK3/MK3S/MK3S+) and Mini RAMBo electronics wiring (MK2S, MK2.5, MK2.5S).

If you suspect that the LCD ribbon cables connectors are not firmly seated in the slots, disconnect the LCD ribbon cables and check the slots for any bent pins. If there are bent pins, you can use tweezers to fix them. However, be very careful not to break the pin(s) completely.

If none of the above resolved the problem, turn the printer off again and try to unplug both of the cables, lay them down on a flat surface and gently stretch them. Then plug them back in and turn on the printer.

When a Brother Printer has a status of "Offline," it is not electronically connected to other devices, such as a laptop or desktop; when your printer is "Online," it is able to connect to other devices. A connection to other devices is necessary, as the printer must receive information from other devices in order to print materials. Your Brother Printer could be listed as "Offline" because it is not turned on, it has errors such as empty toner, it is not set as the default printer or its USB cord or its Network have a connection problem.

Printer Not Turned On Your Brother Printer could be listed as "Offline" because it is not turned on. Even if your printer is connected to your computer via USB, your computer will not recognize any connection if the printer is turned off. Brother reccomends checking the printer"s LCD screen; if it is blank, then the printer may not be powered on. Make sure the printer is plugged into an electrical outlet, the outlet is working and all switches are turned to the "On" setting.

Printer Error Your Brother Printer could be listed as "Offline" if it is experiencing errors such as "Toner Empty" or "Paper Jam," both of which would prevent printing. Brother recommends checking the printer"s LCD screen for any possible error messages. If you see an error message, attempt to remedy the error before checking the printer"s online status again.

Printer not the Default Printer Your Brother printer can be "Offline" if it is not set as the default printer on your computer. A default printer is the printer your laptop or computer automatically sends a print job (unless you specify otherwise) when you click "Print." If your Brother printer is not the default, your computer may be trying to connect to a different printer. You can make your printer the default in your computer"s "Devices" section. If it is not listed as a device in the devices section, you must re-install the printer driver from a CD-ROM or Brother"s website.

USB Cable or Network Problem Your Brother printer can also be listed as "Offline" if its connection is faulty. If you connect to your printer via a USB cable, the cable could have something wrong with its hardware; Brother recommends USB cables that have twisted pair wiring, are shielded and are not more than 6 feet long. If you connect to your printer via a network, the network could be down or firewall-protected; Brother recommends checking your network"s router or hub, checking your computer"s firewall setting to make sure it does not block the network connection and running network connection diagnostics.

Global Office Machines technicians are the best in Australia at servicing Brother printer malfunctions and errors. Here, our people share their top troubleshooting tips that you can do yourself:

In cases where your Brother laser printer, all-in-one printer or fax machine stops functioning, the first thing to look for is an error message on the LCD display. Generally, an error message or error status code will appear. Implementing most error solutions are best left to professionals. Global Office Machines Brother Laser Printer Repairs can be booked in for same-day on-site service.

Brother Printers are world-class machines featuring the latest technilogical innovations. That means that many repairs may be too complex to be handled by the layperson. Global Office Machines offers full printer repair service on all Brother models, serving the greater Sydney area with a fleet of mobile service vans manned by certified printer repair technicians.

Because we specialise in both printer repairs and sales, buying from GOM means that technicians will help set up your machine and walk you through basic troubleshooting steps that you can handle in-house.

Click to learn more about our Brother printer repair services. If you’re interested in purchasing a Brother printer for your home or office, browse our top-selling products below or see all Brother products in our store.

Brother printers are reliable and trustworthy, but that doesn’t mean they never experience any type of problem. The sad truth is that all brands of printers can have glitches and issues every so often. These glitches can interfere with the printer’s ability to perform printing jobs. The good news is that, in most cases, these small glitches or issues can be corrected with a simple reset.

To reset the Brother HL printer, press the Menu button on the device and then use the up and down arrows to select Initial Setup. Click on Reset and then confirm the action by pressing OK. The LCD display will show Reboot OK?. Click to confirm the reboot. The printer will reset and then restart.

If the reset doesn’t work, complete the process once more. You may need to unplug the cords running from the printer to your computer (if you have a wired printer). Once the cords have been unplugged, start the reset process by pressing the Menu button on the printer and then selecting Initial Setup on the LED screen. On the Initial Setup screen, find the Reset option and click on OK to confirm the action. The printer will reset, turn off, and then turn back on again.

It is recommended to confirm with your printer’s owners’ manual on how to reset your specific model or Brother HL printer. The owners’ manual has a slew of useful information that can help fix issues that you may experience with the machine. This includes how to properly reset the device, as well as how to contact the manufacturer for technical help. Make sure to keep this manual in a safe location.

When your Brother HL printer won’t turn on, it directly affects your ability to complete the printing jobs you need done. After all, the device has to be on in order for it to print. Before you chalk the device up as a loss, try the following troubleshooting steps to get the printer working once again.

If the Brother HL printer is not turning on, first remove the power supply from the device for 30 to 60 seconds. Press the ON/OFF button and hold down while you insert the power supply cord back onto the printer. Make sure you keep the ON/OFF button held down for 15 seconds.

Once the 15 seconds have passed, release the button and try to turn on the device. If the printer still won’t turn on, try up to 3 times. Another option is to remove the printer’s power cord for 30 to 60 seconds, and then remove the paper tray. Plug the power cord back in and turn the printer on. Once the device has turned on, reinstall the paper tray.

If the printer still refuses to turn on, reach out to Brother’s customer service for further assistance. The machine may be experiencing a mechanical failure or other problem that you won’t be able to fix without the help of a repair technician.

While a Brother HL printer isn’t connecting, the issue is usually caused by the printer being unable to connect to your computer due to an issue with your internet network. While this is a frustrating problem, there are a few different troubleshooting steps you can try to fix the problem.

When your Brother HL printer won’t connect, you should first check to see if other devices on your network are connected to the internet. If they are not, try resetting your router by unplugging it and waiting 15 seconds before plugging the router back in.

Wait for the router to boot back up and check to see if the printer will connect to the computer. If the printer is still not connecting to the router, and you are also having issues connecting your other devices to the internet, the issue may be with your service provider. Consider contacting them to confirm whether or not there is an outage in your area.

If the printer is not connecting to your computer and the issue is not with your internet service provider, try unplugging the Brother HL printer from its power source and waiting 60 seconds. After the allotted time, plug the printer back in and turn the device on. It may take a few minutes for the printer to fully come back online. Confirm that the printer is now connected to the computer, and print a test page.

The entire purpose of a printer is to print. So when your Brother HL printer refuses to print, it pretty much turns itself from a useful tool to a large paper weight. While you may be tempted to trash the printer, try the following instructions to get your printer to start printing once again.

When the Brother HL printer isn’t printing, the first thing to check is to make sure it is selected as the default printer. This can be done in the Control Panel on your computer. In the Control Panel, select Devices and Printers and make sure the Brother HL printer is selected as the default printer.

If it isn’t, simply right-mouse click on the printer’s icon and select “Set As Default Printer.” This will change the Brother HL as the default device. This means that anytime you print something, the Brother HL printer will be the machine that gets sent the printing job. If you don’t have more than one printer, this is the ideal solution. For homes or offices with multiple printers, however, you may not want to set the Brother printer as the default device. Consider this when deciding which machine will be the default printer for that computer.

Brother printers of all models can experience issues after a while. The good news is that, in many cases, the issues the device is having isn’t anything too serious. If your Brother HL printer is experiencing problems, the first thing you should try to do is reset the machine.

To reset the Brother HL printer, unplug the power cable, as well as any and all interface cables connected to the device. Press the Settings button on the printer, followed by the All Settings button. Use the up and down arrows to select Initial Setup and then click on Reset.

After selecting Reset, you will need to click on either Factory Reset or All Settings. The exact one you click on will depend on your model of Brother HL printer. Once you have selected Factory Reset or All Settings, click on Yes to confirm the action. You will then need to restart the printer in order for the reset process to occur.

A hard reset of a Brother HL printer returns the device back to factory settings. This means that any customized settings you have programmed into the machine will be lost when the device is reset. Unfortunately, there may come a time when you are required to reset the printer back to its factory settings. While this can be annoying, it is not a difficult job.

To hard reset a Brother HL printer to factory settings, you must first unplug all the device’s cables. Once unplugged, select Initial Setup on the device’s LED screen and click on OK. You will then need to select Reset > Factory Reset > Reset. Confirm the factory reset by pressing OK.

Keep in mind that restoring the Brother HL back to factory settings is not something that should be done without first trying other troubleshooting options first. For example, a simple reset can sometimes clear small problems that the device may be experiencing. This type of reset won’t restore the device back to factory settings, nor will it erase the settings you have programmed into the printer.

A printer drum is an important part of printers that will need to be replaced periodically. If not replaced, the printer can begin leaving smudges, streaks,and blank spots on your printing jobs. After you have replaced the drum on your Brother HL printer, you will also need to reset the drum counter. Resetting the counter will not only reset the actual counter of the drum, but it will also clear the message stating “Drum Stop” or “Replace Drum” on the device’s LED screen.

To reset the drum counter on your Brother HL printer, use the up and down arrows on the printer’s screen to select Machine Info > Reset Parts Life > Drum Unit. Then click on OK to confirm. The Brother HL printer will need to be restarted to complete the reset process.

The LED screen should show the word “Accepted” to confirm the reset. When the printer has been reset, the LED screen will confirm it is ready by displaying the word “Ready.” Restart the printer and then try printing a test job. If you have any issues during the process, you will need to restart the drum counter reset from the very beginning.

In many cases, the “Replace Drum” message will appear on the printer’s LED screen when it has printed approximately 15,000 pages. For the best results, the drums of the printer should be replaced together at the same time. This helps to maintain the quality of the printing jobs. If your unsure of how to replace the drum, or feel uncomfortable trying to replace the part, reach out to Brother customer service. They can locate a service repair technician near you that has the knowledge and expertise of replacing drums on a Brother HL printer.

Sometimes, after you have replaced the toner cartridge on your Brother HL printer, the LED screen will still show the message that the toner needs replaced. This message usually won’t affect the printer’s ability to perform, but it can be annoying and prevents the printer from properly keeping track of how much ink is left. Thankfully, resetting the toner cartridge is something that can be accomplished in a few moments.

To reset the Brother printer HL after replacing the toner, open the device’s top cover and leave it propped open a bit. Click on the Back and Cancel buttons simultaneously. Immediately press the Back button one more time.

Keep in mind that you shouldn’t reset the toner unless you have replaced it with a new cartridge. Resetting the toner without first replacing it will prevent the printer from accurately keeping track of how many pages you have printed on that cartridge.

When the new toner cartridge is installed, the Brother HL printer typically automatically resets the message and the counter. Unfortunately, glitches can occur which cause the printer to not reset the “toner is empty” or “toner is loner” message the printer displays. Thankfully, there is a way for you to manually reset the Brother printer.

To reset toner on Brother printer HL, you will first need to turn the printer off and open its front cover. Press and hold the Go button while also turning the printer on. Let go of the Go button when the drum, toner, and error LED light turn on but the Ready LED light turns off.

Once this occurs, press the Go button twice. This will cause the drum, toner, and error LED light to turn on. At this time, press the Go button six times. This action will cause the error LED light to flash. Close the printer’s front cover and restart the device. The message should be cleared and the toner reset.

Brother produces a wide variety of printers. Read this introduction carefully to determine which steps are right for your printer. This guide offers four different categories of Brother printers: button-only, multi-button one and two, and digital control panels.

Categories two and three have similar multi-button displays. However, some of the older models require extra steps. If you know what model you have, you can go straight to the appropriate category. If not, try both to see which steps works best for your device. Try categories two or three if your display looks something like this:

The fourth category is for models with touch-screen or digital displays. Use the steps in the fourth category if your display looks something like this:

Before continuing, unplug any wire cables that connect your printer to the network. The factory reset will not complete if your device is connected to the network. Not all Brother printers will have wire connections to the network.

Error 30 is one of the most common Brother printer error messages. The error code 30 and the error message “Unable to Print” indicate that the printer is not able to print due to a mechanical malfunction. Another possible reason for this error to occur is an object getting stuck in the machine, for example a paper clip or a piece of paper.

If your Brother printer is not printing and the message “Unable to Print 30” appears, fix the problem with the following steps for troubleshooting: Use both hands to lift the scanner cover into open position and make sure that you see the scanner cover support arm on the left hand side of the machine.

Now check both the right and the left corner and remove any objects, such as paper scraps or paper clips, that are jammed in the machine. Afterwards, turn the printer around and open the jam clear cover on the back to check for foreign objects or to remove jammed paper. Once all objects have been removed, close the covers and resume the printing job.

Are you looking for a solution to get rid of error 51? The error message “Unable to Print 51” is a common Brother printer error, indicating that there is a problem with the laser unit.

If you have recently changed the cartridge of your Brother printer, it is highly probable that either the cartridge, the laser, or the lid was not put into proper position. To fix the issue, open the printer up again and make sure that everything is installed properly.

If you have not changed the cartridge and are still facing error code 51, try switching the printer off and back on again. If the problem persists, part of the laser unit may be defective. You can fix the issue by replacing the laser unit.

Brother error 50 indicates a malfunction of the fuser unit. This could be caused by the fuser unit getting too hot during printing, or not heating up enough in order to print. As a result, the printer is unable to print.

To fix the issue, turn the printer off and wait for five to ten minutes. Then turn the printer on again and wait for another ten minutes. If error 50 persists, you may need to replace the fuser unit of your Brother printer.

Are you looking for a solution to get rid of error 51? The error message “Unable to Print 51” is a common Brother printer error, indicating that there is a problem with the laser unit.

If you have recently changed the cartridge of your Brother printer, it is highly probable that either the cartridge, the laser, or the lid was not put into proper position. To fix the issue, open the printer up again and make sure that everything is installed properly.

If you have not changed the cartridge and are still facing error code 51, try switching the printer off and back on again. If the problem persists, part of the laser unit may be defective. You can fix the issue by replacing the laser unit.

Error 48 is one of many “Unable to Print” error codes generated by Brother printers. The error message means that the print head cable or circuit board is either broken or damaged. This may be caused by foreign objects, such as ripped pieces of paper, or paper clips getting stuck in the printer and thus destructing the printer head.

To fix Brother printer error 48, turn the printer off and lift the scanner cover. Then look for any objects stuck in the machine. If you see any objects that do not belong, make sure to remove them carefully. If this does not help you get rid of the error message, you may need to clean off the encoder strip of your brother printer.

The encoder strip is a transparent plastic strip in front of the vinyl band within the machine. Using a dry cloth, clean the strip carefully. Then turn on the printer and pass a print command to check if the problem was solved.

If the error TS-02 occurs while using your Brother printer, you are facing one of the most common Brother printer errors. The error code TS-02 occurs when the wireless access point or router fails to connect to the MAC address of the printer. There are several possible causes of Brother error TS-02: Windows system file damage, corrupted system file entries, incomplete installation of the Brother printer, or other hardware problems.

If the error message “Replace Toner” appears on the display of your Brother printer, the toner cartridge of your printer is at its end of life and needs to be replaced shortly.

The easiest way to get rid of the error message is to replace the toner of your Brother printer. If the error “Replace Toner” does not clear from the display after the replacement, try these quick fix solutions:

First, make sure that the new toner cartridge is installed properly. Second, confirm that you have installed a brand new Brother Standard toner cartridge. If you are using a Brother starter toner, a remanufactured toner or a non-Brother toner, this is what causes the error.

Also make sure that the toner displayed on the LCD is the same color as the toner you already replaced. If it is not the same one, simply replace the one shown in the display in order to get rid of the “Replace Toner” error.

The error message “No Paper” on the display of your Brother printer indicates that the machine is out of paper. However, the error message may persist even after refilling the paper tray. To fix the issue, you need to identify the cause of the error.

Ensure that the paper is loaded correctly in the paper tray, and that the paper source is selected correctly in your application or printer driver. If “No Paper” still appears on the display, try printing a document by using the manual feed slot of your Brother printer by changing the tray settings. If you are able to print a document, the error message should no longer appear.

However, if the error persists, continue by adjusting the paper type and paper size setting on your printer. You can also check the printer settings reports or use the Auto Detect function to fix the problem.

The Drum Error is another common error experienced by users of Brother printers. Both the error message “Drum Error” and “Clean Drum Unit” mean that the drum unit of your machine is dirty. The dirt may be caused by dust or by loose toner.

As a quick fix solution, you need to remove the toner unit and clean the corona wires in the drum unit. After removing the toner from your Brother printer, slide the blue tab at the front of the unit from side by side, then return it to its standard position and put the drum unit back into the machine. If cleaning the drum unit does not solve the problem, and the printer continues to show a drum error, replace the drum unit with a new one.

In most cases, error messages 20, 21, 22 and 23 can be easily get rid of by simply turning the printer off and back on again. However, if you are still facing one of the error messages, make sure that the ink cartridge is loaded correctly. If the cartridge is broken, replace it with a new one. If the ink sensor is defective, replace the main PCB of your Brother printer.

Have you come across error code TS-07 while working with your Brother printer? Then you are facing a problem with the connection of your printer to the WLAN access point or router. Luckily, this problem can usually be solved easily.

Get rid of Brother printer error TS-07, follow these simple troubleshooting steps: Ensure that your WLAN access point or router is supporting WPS or AOSS. Then check the settings of your Brother printer by using automatic wireless mode with either WPS or AOSS.

The Brother printer error code 36 appears on the display of the printer when there is a mechanical malfunction. Here is how to solve the issue causing the error message “Print Unable 36”: Turn off your Brother printer, then turn it back on again. Check the display for any errors. If there are no more error messages, continue with the next step.

Print the user settings list by entering the menu, then choose “machine info” – “user settings” and press “start”. If the list is printed and error 36 does not show up on the display, you have successfully solved the problem.

If the error message persists, turn off your printer and remove both the drum and the toner. Turn the printer back on and check if the error appears. If not, reinstall both drum and toner, and print the user settings list as described in step two.

Error 45 is a common Brother printer error code. It occurs when the Windows system is not able to acknowledge the device and thinks that the printer is disconnected. This error is most commonly caused by a temporary system file malfunction or by a problem with the registry system files within Windows.

To fix Brother printer error code 45, try to reconnect the printer to your computer. In order to do this, unplug the USB cable of the device, then plug it back into the computer. In some cases, reconnecting the Brother printer to the computer will already solve the problem.

Another solution is to use a driver assist program to fix the Windows registry files. The program can restore any files that are damages and possibly causing error 45.

The common Brother printer error code 0x803c010b looks more complicated than it actually is. The error simply indicates that your printer is not connected to the network via a wired or wireless connection. The error code is often accompanied by the message “Unable to print the documents. Please try later.”

To fix Brother error code 0x803c010b, there are two common solutions: In the control panel of your Windows computer, access the printer menu. In the settings for the Standard TCP / IP Port, select “Configure Port”, then unmark the “SNMP Status Enabled” checkbox. By applying the new setting, you disable the protocol. After rebooting your computer, check if the connection to the printer is now established.

In some cases, a reinstallation of the printer device fixes error 45. In the control panel, select the “Devices and Printers” option and remove your Brother printer. Now unplug your printer and restart your computer. After the restart, plug in your Printer and reinstall its drivers.

When the main motor of the Brother printer is not functioning properly, error code 54 is shown in the display of the device. The main motor is responsible for driving the main gear train and therefore an important part of the printing process.

If you are facing Brother printer error code 54, switch your printer off and back on again. In many cases, a restart of the printer already fixes the problem. Another possible solution is to remove the toner before turning the printer back on.

If the motor is working without the toner installed, the problem may in fact be caused by the toner. In this case, simply replace the toner. If the main motor is still not working, replace the motor with a new one.

Error code 55 and the error message “Replace Laser Unit” are common for Brother printers. The error code appears on the display when the laser unit has reached the end of its life cycle. It is necessary to replace the laser unit every once in a while, because worn laser units will lead to a poor printing quality.

The Brother printer error message “Paper Jam” means exactly what it says: The printer has detected a paper jam in the machine. However, in some cases the error persists even after the jammed paper has been removed. Here is what you can do to solve the problem.

First, pull the paper tray out of the printer and check for any paper stuck in the cavity where the paper tray was installed. Remove any paper stuck in the machine. Next, turn off the printer and remove the rear cover from the back of your Brother printer. If there is any paper stuck in this area, slowly pull out the paper. Also check the are under the flatbed scanner and remove any stuck paper carefully.

If you are still facing the Brother printer error “Paper Jam”, even though there is no paper stuck in the machine, the rubber feeder rollers may require cleaning. Carefully open the carriage and wipe the rollers with a soft cloth. Another way to get rid of the error message is to turn the printer off and then on again, or to open and close the scanner cover. If the paper jam has been removed successfully, this should solve the problem. If not, check again for any small pieces of ripped paper in the machine.

Label Makers└ Office Label Making Equipment└ Office Equipment└ Office Supplies & Equipment└ Business & IndustrialAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else