space engineers lcd panel code quotation

Unfortunately there is not enough space in description of the steam workshop page to fit full guide. Well.. there was, but thanks to your suggestions I added more commands and more cool stuff and it doesn"t fit there anymore. So I made this ultimate guide to answer all your questions! ;-)

This guide will give you full insight into how to use all the features of Automatic LCDs 2. You will find out what are the commands, what are the arguments of the commands and how to use them. It also contains full list of all commands with detailed description along with examples of use.

What is block?Block is every machine, button, cockpit, everything on your ship that is accessible through control panel. Armors are not blocks. Script only works with blocks.

Open your programmable block, click Edit, click Browse Workshop, select Automatic LCDs 2, click OK, Check code, Click Ok. Done. Your script is now updated.

Your commands are too long to fit on single line?You can use a \ to tell the script to continue the command on the next line, just make sure there is nothing after the \ not even a space.

This is very useful if you connect ships to your station or ship and you don"t want to see blocks of the connected ships on station LCDs. You can also use this script on multiple ships that connect together without worries that they will conflict once connected.

Script now only updates LCDs which are part of the same grid as programmable block. If you would like to change this please take look at What is LCD_TAG? section to learn how to change LCD_TAG.

LCDs that are connected using rotors, pistons or connectors are not updating?By default the script only updates LCDs that are part of the same grid as programmable block.

LCD_TAG is used to tell the script which LCDs are managed by the script. As all of you know the script looks for LCDs that have [LCD] in their name by default.

You can however change this to whatever you like. You can tell the script to manage LCDs in certain group or even tell it to manage all LCDs regardless of name.

How to change the LCD_TAG?You can change the LCD_TAG by editing the Custom Data of programmable block that runs the script. Let"s explain it by example:

How to tell the script to manage all LCDs regardless of name?LCD_TAG follows the same name filtering rules as commands. So you can set the Custom Data to:

You also can"t change the LCD_TAG during run. You need to recompile the script every time you change the LCD_TAG otherwise the script will still look for old tag.

It is now possible to join multiple LCDs together so they will look and work like single panel. Because of the limitations of text alignment it is only possible to join LCDs up and down. Not left to right. So the widest LCD you can have is Wide LCD. But you can have many of them under each other to form single big one.

NUMBER is position of LCD in array of LCDs. It doesn"t matter what number you choose. They just need to go one after another. So the topmost LCD will have the lowest number. For example 1. LCD under it will have 2, etc.

You can use this script on cockpit screens as well as screens of other blocks. In order to do that you have to mark the cockpit (or other block) with the LCD_TAG as you did with LCDs. So by default you add [LCD] to the name of the cockpit in order for the cockpit to be recognized by the script.

As soon as you do that the first screen on the cockpit will be controlled by the Automatic LCDs 2 and should display the usual message that you should write commands to custom data of the panel. If you need only this screen, you can write commands to Custom Data of the cockpit just as you do with LCDs.

Where is the index of the screen you want to write to. 0 is the first screen, 1 is the second screen, etc. The "AutoLCD" part just needs to be there.

Easy way to know the index of the screen is when you look at the control panel of the cockpit, find the list of the LCD panels and pick one. For example "Keyboard" screen is 4th in the list of the LCD panels which means its index is 3 (because first one is 0). So if you would want to write only to the Keyboard screen your custom data would look like this:

You can use this on any block that has LCD panel screens. Script will not touch screens that you haven"t specified so you can use this with other scripts too. Read "Compatibility with other scripts" if you want to know how Automatic LCDs can share Custom Data with other scripts.

Script now only updates LCDs which are part of the same gridThis means that LCDs which are connected using connectors, pistons or rotors will not be updated to prevent conflicts between docked ships. This does not apply when ships are connected using merge block because in that case they behave like single ship in game.

LCDs are updating much slower when more ships are docked using merge blockIf there are more ships using this script docked together using merge block then the programmable blocks will not split the work efficently automatically.

I recommend using different LCD_TAG for each ship and station. Look at Tips and Tricks section of this guide to learn how to do that. This will ensure that programmable blocks always update only LCDs on the ship/station they are intended for.

LCDs are showing items, power, cargo, etc of all docked shipsThis will happen if you use no arguments to commands or if you use * or if you use same names for groups / blocks on both ships. Make sure you read Same ship blocks filtering section to learn how to filter only blocks of the same ship.

Automatically separates reactors, engines, solar panels, wind turbines and batteries. Works with modded blocks. It shows maximum achievable power output for solar panels. That means that if there is no sun shining on solar panels then the maximum is 0 W.

It doesn"t work with Hydrogen Engines, because the calculations required to calculate time until hydrogen depletion are really complicated and unfortunately they also require a lot of code to be added which currently doesn"t fit into the programmable block limits. I"m sorry about that.

Displays damaged and partially built ship/station blocks. Script only has access to blocks which are visible in control panel so no armor blocks, conveyor tubes, etc are considered.

They are case sensitive! Make sure you enter them exactly without any spaces before or after them. e.g. use {AutoDeploy} not {Auto Deploy} nor { AutoDeploy } nor {autodeploy}.

There are a lot of properties for many different blocks and listing them all here along with what they do would take a lot of space so I"m leaving that up to you to try.

Due to game limitations some blocks do NOT automatically update the details text until you look at them in control panel. This is VERY important as you always need to look at the block in control panel if you want the LCD to show updated text. This does not apply to all blocks!

Note: If you would like to display only leaking air vents you can use Working command and filter only LCDs that show LEAK using filtering described in Working command.

This is very useful when using different mods / scripts that write something to Custom Data of block and you would like to append it to your Automatic LCDs displays.

This is very useful when using different mods / scripts that type something on LCD and you would like to append it to your Automatic LCDs displays. This way you can have one LCD hidden that will be used by your mod / script and use TextLCD command to read that text and write it to one of the Automatic LCDs. Example: TextLCD {Other LCD} will append contents of first LCD named Other LCD.

So first is hours in 24-hour format then : then minutes with a leading zero then space then day of month then . then month number then . and then full year

You can also add this to button panel and setup action on button to Run the programmable block with argument. It needs to be the same programmable block that runs the script that shows the text on the screen on that particular LCD.

If you use custom font scroll down to the bottom of script, then scroll a bit up until you find AddCharsSize lines. Monospace font name and size definition is above those.

LCD clear functionWhen you Run the programmable block with argument "clear" (without quotes) it will clear all LCDs. You can use this to turn off your LCDs without having to actually turn them off where they would say "OFFLINE".

LCDs boot screensUnfortunately there is no easy way to find out that you turned off/on your ship so the script doesn"t automatically display boot screens after turn the power sources off and on. You can however use the LCD clear function to reset the LCDs when you turn on your ship/station. There is also special "boot" argument to start the boot sequence whenever you need it. Just Run the programmable block with "boot" (without quotes) as argument.

Automatic LCDs 2 is not a mod so you don"t need to do anything in dedicated server setup to use it except for having enabled in-game scripts in your world.

How to keep your translation up-to-date with the main script?This is why I"ve separated the messages from the main code so you don"t need to walk through code to find what needs to be translated. When I update the main script you can just copy-paste the item lines and message lines from your old translated version to new script and just translate any new items/messages that were added in the update.

How to use LCDs that are connected using rotors, pistons or connectors?By default the script only updates LCDs that are part of the same grid as programmable block. First, I do recommend reading about "Same grid filtering" in separate section of this guide.

How to stop the script from changing Content Type of the panels?You can add line "SKIP_CONTENT_TYPE = true" (without quotes) to Custom Data of the programmable block to disable automatic panel content type change.

Keen has added MyIni format that scripters can use to parse Custom Data. This was added explicitly to make life easier for scripters when they need to use Custom Data and share it with other scripts. This was written by Malware (the creator of MDK framework for Space Engineers in-game scripting and father of Programmable Block) and I"ve been discussing with him how to make it compatible with Automatic LCDs without people having to learn new syntax so he came up with great solution.

If people also want to write Automatic LCDs commands to the same block where the Custom Data is already used by script that uses MyIni format then they can simply add 3 dashes on its own line and continue with Automatic LCDs commands like this:

Anything under the --- is ignored by the MyIni parser that other scripts use. Anything before the --- is completely ignored by the Automatic LCDs so this way Automatic LCDs can share Custom Data with other scripts and coexist peacefully :)

NOTE: Some scripts overwrite the Custom Data and if you already have some Automatic LCDs commands there they will remove them. If those scripts support the MyIni format then you can write your commands like this to make them not remove the commands (or set them up first and then use the format like explained above):

*** Check your ownership ***Always make sure that the programmable block and LCDs have the same ownership as the blocks you want to show on the LCDs. I highly recommend you own all the blocks unless you know how ownership works. Just open the control panel, select one of the blocks on your ship, press CTRL+A and change the ownership on the right side to "Me".

Technical details: Script limiter counts real time it took script to execute. Because of how computers and operating systems work the real time it takes to execute some code is dependent on other things running on the computer. So if one thing is using a lot of CPU then other things will take longer to complete. This is why even scripts that do almost nothing can take a lot of time to complete if the computer is overloaded by for example doing backups, scanning for viruses, calculating the answer to ultimate question, etc. Because the scripts get less CPU time it takes much longer to complete even simple tasks. This is why its almost impossible to make the script survive script limiter actions if the server is overloaded from doing other stuff many times even outside of the SE game itself.

1. If your LCDs are on separate grid (behind rotor, piston, connector) they will not be updated. Read LCDs that are connected using rotors, pistons or connectors are not updating? section of Troubleshooting section of the guide.

Programmable block reports "Exception".If programmable block control panel shows "Exception" please report it in he "BUG REPORTS" discussion on main script page.

LCDs that are connected using rotors, pistons or connectors are not updating?By default the script only updates LCDs that are part of the same grid as programmable block. First, I do recommend reading about "Same grid filtering" in separate section of this guide.

If some of your LCDs are sometimes offline:it"s probably a game bug and it"s happening to more people. Someone said that loading game, returning to main menu and loading again helps.

Does your LCD just say ONLINE instead of showing things?Make sure that you named your LCD so it contains [LCD] . If you did, you are most probably using german client which has problems with [] characters that you type in game. You can use copy-paste to overcome it or simply use alternate built-in tag I made for you !LCD!

It"s just blank screen?Your command is wrong or there is simply nothing to show. Check your command syntax in full guide, try examples. Make sure that there is nothing in front of the command in LCD Public Title (game sometimes likes to hide the "Public title" text). Always press Home before entering command to make sure there is no text at the beginning of LCD Public Title that you don"t want to have there.

Programmable block reports "Index out of bounds".Make sure that you updated the script to latest version with all the fixes. Check that script has permissions to write to LCDs!

FSD can clone the text content of other displays. These texts can be fixed or could be generated by other scripts (like Automatic LCDs 2 by MMaster or Isy"s Inventory Manager)

LCD Panel, clone:0 position(100,50) fontsize=0.5 TextColor(255,128,0)This would clone the text contend of the first screen of the block "LCD Panel" to the position (x=100 y=50) in an orange color with a font size of 0.5.

This way you can ether reduce the number of LCD Panels needed or greatly enhance the amount of information you can display with a given set of screens/panels.

Caution: There has to be no space between "layoutrate" and the equals sign "="This will set the rate of changes for the screen layouts. (in changes per minute)

You can overide individual LCD/Cockpit screen settings by using a special keyword line starting with "FSD options:" in the Custom Data field of the Programmable block itself.

All keywords for this override options must be in a single line and this line must be located above an optional "ShowStats" line or else the used keywords affect only the LCD panels of the Programmable block.

The LCD Panel is a thin panel that takes an entire block face and can display a variety of messages and textures that can be displayed constantly or triggered by the Programmable Block, Sensor, Timer Block, or any other block capable of triggering.

The "Color" sliders allow setting the text colour using RGB slider and "Backgr." allows setting background fill colours (default black). If using a transparent LCD then the text will be against transparency unless fill colour is added.

"Loaded Textures" has a list of the available default and modded (where applicable) images available for display on the screen. Select the desired image and select "Add to selection". The selected image will then show in the second "Selected textures" panel.

When multiple images are applied they can be set to cycle between with the duration between images being set by the "Image change interval" slider. To remove an image from display select it in the second panel and select "Remove selected".

The "Preserve aspect ratio" checkbox can be used to prevent the image being stretched if it does not fit the screen properly such as when using a wide LCD.

To set the LCD to display a script, choose "Script" from the dropdown. Choosing Script allows the display of information such as weather, artificial horizon for vehicles, Energy and Hydrogen level etc.

The panel"s title and text can be made public, private, or a combination of both. Textures applied can be selected from a list or custom textures can be selected. Textures can be set to rotate on a timer, changing from one to the next. GPS coordinates shown in the GPS format in the text panel will appear in the GPS and can be activated (=shown on HUD).

The LCD Panel could be accessed with the programmable block as IMyTextPanel. It could work in ´Texture Mode´ in which the selected textures are shown or the ´Text Mode´ in which the text is shown. The following methods are available:

license. For more information, see Generate Code for String Blocks by Using the Standard C++ String Library(Embedded Coder).String Data Type Conversions

A collapsed content section is used to hide information until a user chooses to reveal it with a click or tap on the summary text. The hidden content is revealed inline. For example, this code:

<iframe src="//www.slideshare.net/slideshow/embed_code/key/EixD8OUMBX65Jy" width="595" height="485" frameborder="0" marginwidth="0" marginheight="0" scrolling="no" style="border:1px solid #CCC; border-width:1px; margin-bottom:5px; max-width: 100%;" allowfullscreen> </iframe>

To add fancy emojis to your file, click control+cmd+space on your Mac and check the ⭐️ magic ⭐ or use a website like Emoji Finder. Do not overuse them, please!

Visual Script Builder allows you to create Space Engineers scripts with a user interface. You don"t need to know anything about programming. Just enter the name of the block you want to control and choose what to do with it. Chain logic statements together to create complex behaviors.

A large number of Space Engineers players are unable to utilize programming. The scripting documentation is poor, and the in-game editor doesn"t provide any help. Many people are unfamiliar with coding, and C# in Space Engineers doesn"t make for a simple beginner language. There are scripts available on the Steam Workshop, but those rarely work for custom applications.

I developed this tool to let anyone capable of playing Space Engineers write their own custom scripts. I tried to make it as feature-rich as possible while still being easy to use.

In Visual Script Builder, everything is driven by logic chunks. One logic chunk can either check a condition (e.g. If Light X is ON), or apply an action (e.g. Turn Light Y ON). You can insert logic chunks and remove logic chunks at any point in the script. There is no limit to the number of logic chunks you can use. Each logic chunk consists of the logic type, the in-game Space Engineers block it applies to, and the in-game block"s data.

When writing the text you want displayed on an LCD panel, you can use any variables that you created in your script by surrounding them with brackets. For example, if you saved a variable called totalpower, you could display its value on an LCD panel by writing [totalpower]. This can be combined with any other text, or any other variables. Total Power: [totalpower] would display Total Power: 3.00MW. See additional information about using LCD panels below.

Don"t worry about highlighting and copying, just click the button to copy your entire script to the clipboard and paste it into the editor in Space Engineers.

As you can see, our variable (here named variableName) is followed by a question mark (?), the text to display when true (trueText), a colon (:), and the text to display when false (falseText). For use on the LCD panel, we must enclose this whole string in brackets. In a more realistic scenario, we might want to display ON when our Reactor is on, and OFF when our Reactor is off. We can create a boolean variable called reactorOn for the Reactor"s On/Off state by typing a new variable name (reactorOn) into the Save As box for the OnOff property of the Reactor. For this property, true means the reactor is on. To get the text to display correctly, we can type the following into an LCD panel.

As of Update 1.0.3, it"s also possible to do calculations right inside the text of the LCD panel. This allows you to display your power percentage. Mathematically, power percentage is:

To do more complex calculations, you can use double brackets. This escapes the text string, and executes any code you type as though you were writing code in the in-game script editor.

This can cause your script not to compile if you don"t use the correct C# syntax. There is no error checking in VSB to ensure the code you typed is valid.

The Block Name box is where you enter the name of the Space Engineers block you want to work with. If this is left blank, the default value will be used for the chosen block type. Leave this blank.

That"s it! You"re now ready to try the script out. Click the Copy Script To Clipboard button, and paste the code into a Programmable Block in Space Engineers. Running the code will toggle on/off an Interior Light with the name "Interior Light".

In Space Engineers, create a Programmable Block. Go into the Programmable Block"s menu and click Edit. Delete everything in the editor and paste in your script. CTRL-C and CTRL-V work in the editor. Click Check Code to check the code for errors, then click Remember & Exit to save. Be careful, as using ALT-TAB to switch out of Space Engineers will revert your script to the last saved script. It is easy to lose your changes.

To run the script, open the Programmable Block"s menu and click Run. You can also assign this action to your toolbar in a ship, or to a button panel by dragging the Programmable Block to the bar and choosing Run with default argument.

If you want your script to be run constantly (for example, waiting for a door to open and triggering the lights to turn on) you can use the Frequency dropdown in the Script Settings menu. It will automatically run your script every 1, 10, or 100 ticks. There are 60 ticks per second in-game. This feature was introduced in version 1.0.8, but can cause issues when trying to use Arguments in the Programmable Block. With older versions, or to avoid issues with Arguments, you have to use a timer block. Create a Timer block and set the Trigger Delay to 1 second. Click Setup Actions, and drag your Programmable Block to the first space on the bar. Again, use Run with default argument. Then drag your Timer block to the next space on the bar and choose Start. Now start the Timer block, and your script will be executed every second.