ford focus gauge cluster lcd screen supplier

This item is a color TFT LCD screen for a 2012 – 2018 Ford Focus. This screen will repair your black or blank speedometer display. Installation is simple. Simply remove the cluster, then remove the front lens and rear panel. The TFT LCD screen will easily pop out without disturbing the gauge needles. The small ribbon cable attached to the screen is also attached to the back of the circuit board. Carefully release the clip on the circuit board and remove the screen with the ribbon attached.

When you receive the new screen, you will reuse the original ribbon. Simply transfer it over to your new TAE screen. No programming is required. After installing your new LCD screen, plug your cluster back into your vehicle and enjoy a working display.

PLEASE NOTE: 2013 Ford Escape uses two different versions of this LCD screen.  With mounting bracket and without, please use the videos below to determine the correct LCD screen.

If the instrument cluster fails while driving, then this will often cause the engine to cut out. If failure happens while attempting to start the vehicle then it will prevent the engine from starting. You will notice the immobilizer light flashes continuously when the instrument cluster fails and the mileage reading will only show dashes (-------) instead of the mileage.

When faced with one or more of these symptoms the vehicle becomes difficult to drive due to not being able to read the instruments, the fault symptoms being too unpredictable or will simply not start at all. Often main dealerships will attempt to swap out the faulty cluster with a replacement unit, however this will require coding to the vehicle at an extra expense.

Our Ford Focus instrument cluster repair service will give you better value for money, takes 2-3 working days and comes with an unlimited mile Lifetime Warranty. Not only this but we also engineer-out the faults to ensure that the Ford instrument cluster problems do not return.

We fully test every instrument cluster before and after the rebuild process to ensure every instrument cluster performs as originally intended by the manufacturer and is as good as, if not better than a brand new unit. We test these units on a purpose build HIL (Hardware In-the-Loop) test rig that replicates all driving conditions, this allows us to replicate any fault described by the customer and eradicate Ford instrument cluster problems.

We take a great deal of pride in our work and will always handle your instrument cluster as if it where our own, we understand how important it is for your instrument cluster to always look as good as new when it is fitted back to your vehicle. We rebuild these Ford Focus clusters for both main dealers and independent specialist all over the globe, so you can always be assured of our very high standard of work.

Once received we will test, rebuild and return your instrument cluster with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

Package the dashboard instrument cluster inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Once received, we will test your cluster and call you to advise on the outcome of testing, if your unit is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

2012-2018 Ford Focus instrument cluster display screen , MFD, 140MPH. How do I know if my cluster is 140MPH or 150MPH?. 2011 - 2018 Ford Focus Gauge Cluster LCD Screen Repair - YouTube. Fits the 140 MPH cluster, if you have the 150 MPH. Installation is easy. Simply remove the cluster, then remove the front lens and rear panel. For installation info please watch video at bottom of ad 2013-2016 Ford Focus & Escape direct replacement information center display . Speedometer instruments cluster screen. Fits the 140 MPH cluster , if you have the 150 MPH please enter this number into eBay search bar 264190094341 for 150 MPH scale type. Any questions or help please eBay message us. Screen 4 inches wide and 2 11/16 in height with tabs Use your original ribbon cable . No soldering required , needle pointer removal is not required for installation. Installation is easy. Simply remove the cluster, then remove the front lens and rear panel. The new speedometer screen will easily pop out without disturbing the gauge needles. Please verify that your gauge face reads up to "140" or "150" MPH. Hash marks do not matter. If it does not say "150" then it does not have the 150mph screen. There are two different Ford Focus and Ford escape screens. Select the screen that matches your gauge face. 2013 Escape may have either screen. Please verify the screen first. It either has brackets on the left andright side of the screen or it does no t. Questions we have received. How do I know if my cluster is 140MPH or 150MPH? Answer. Look at your speedo gauge face where the blue needle is, look at the scale , that is the determining factor. AR Speedometer & Gauge Tulsa OK AR Speedometer & Gauge Tulsa OK