5 inch hdmi tft lcd touch screen for raspberry pi for sale

Now we have this 5-inch TFT display with a touch screen that can provide a high-resolution picture and a large viewing screen for your Raspberry Pi. The display supports any revision of Raspberry Pi and works perfectly for Raspberry Pi B+/ 2B/ 3B. It is the low power consumption for the backlight of the screen. The high 800 x 480 resolution can give you a full-color experience, the touch screen allows users to play easily.

*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example on Bullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But on Buster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example on Bullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But on Buster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.

※Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

All the accessories listed below tier pricing need to pay.We won"t deliver until you select. Power adaptor should be 5V/2000mA in output and center pin for positive voltage and the outer shield for negative voltage .The temperature for controller RTD2660 would increase during working.That"s normal phenomenon,not quality problem.

ER-TFTV050A1-1 is 480x272 dots 5" color tft lcd module display with small HDMI signal driver board,optional capacitive touch panel with USB controller board and cable and 4-wire resistive touch panel with USB driver board and cable, optional remote control,superior display quality,super wide view angle.It can be used in any embedded systems,car,industrial device,security and hand-held equipment which requires display in high quality and colorful video. It"s also ideal for Raspberry PI by HDMI.

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller"s listing for full details.See all condition definitionsopens in a new window or tab

This TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off screws included in this pack to put the Raspberry Pi on the display board. But while you do this please ensure that the HDMI ports of both the Display and the Pi would line up with each other so that you will take advantage of HDMI connector that we are providing in this product pack.

This 5 Inch Touch Screen HDMI Interface TFT LCD Module is a mini panel-mountable HDMI monitor. Small and simple, yet you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product.

It features efficient operation by equipping Backlight Power switch with which you can control the backlight whether to be on and off to save power. It has 13×2 Pin Socket from where one can get 5V Power from raspberry Pi to LCD and at the same time, transfer touch signal back to Raspberry Pi. It also features extended interface which is the replica of 13×2 Pin Socket.

If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost. Please note that if your item is already soldered or modified in manner we will not be able to take it under return.

We don"t accept the returns for the products damanged by improper use of the product. Moreover we don"t accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product. Returns are accepted only with 3 days from the date of delivery.

We ship to all over India with free shipping on all prepaid orders. For Cash on Delivery orders INR 70 will be charged for orders below INR 599 and INR 20 will be charged for the orders above 599. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Not only the Pi, you can also use it with any other Mini-PCs like Cubieboard, Marsboard (resolution is limited depending on the board, and touch panel is unavailable).

1. Connect this LCD to Rasp PI with HDMI cable.2. Insert TF CARD with System image.3. Connect Rasp pi to Power with micro usb cable.4. Power on.5. Wait some second,You will see the System is run!

Note: If you want to use this LCD as general monitor, the mini USB port is used for power supplyyou just connect HDMI to any device(with LCD power by mini port)

The official Raspberry Pi 7” Touchscreen allows you to add touch inputs to your programs, creating a new way to interact with your projects. It also makes for a fantastic desktop screen for day-to-day use of your Raspberry Pi. Wrap it in one of our screen cases and take it anywhere – events, Raspberry Jams or even just your friends house for a coding evening!

For smaller projects, LCD and ePaper displays are a fun way to add a visual element to your projects. With simple code and wiring, they’re great for projects that require text, menus and navigation.

This 5 inch TFT display with touch function is a mini panel-mountable HDMI monitor. It"s small and simple, and the shape makes it easy to attach to a electronic product.

5 inch HDMI display with 800*480 mini LCD screen, high-resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.

It is resistive touchscreen monitor which comes with a touch pen for easy use. When working with Raspberry Pi 4 3B+ 3B 2B+, directly plugged, I/Os for touch function and power supply, HDMI interface for displaying.

This mini HDMI monitor can also work with standard HDMI device as a little PC monitor, please adjust output resolution to 800*480 and use 5V2A power supply to power it via the USB port. The touch function is NOT available in this case.

Monitor can work with standard HDMI devices (adjust output resolution to 800*480),while the touch function is only available for Raspbian and Ubuntu systems.

*When working withRaspberry Pi 4, please comment out by adding # in the front of "dtoverlay = vc4-fkms-V3D" or delete this line directly in the config.txt

Monitor can work with standard HDMI devices (adjust output resolution to 800*480),while the touch function is only available for Raspbian and Ubuntu systems.

*When working withRaspberry Pi 4, please comment out by adding # in the front of "dtoverlay = vc4-fkms-V3D" or delete this line directly in the config.txt