can you clean an lcd screen with windex free sample
You spend a good amount of time looking at your TV screen, so it"s surprising when you don"t notice how dirty it is. However, dirt and debris have a way of building up on screened devices, and if you want the best performance, you have to clean your TV and other screens from time to time. Gunk and other accumulated detritus can be damaging to your precious TV panel, so it"s best to give your television a good cleaning. Fortunately, you only need a few products to get the job done, and it"s a fairly straightforward process. Read on to become an expert in cleaning your TV.
Step 3: When it’s cool to the touch, dust the screen to remove any dirt particles, then wipe it over with your soft, lint-free cloth to remove any residual dust.
Step 1: Mix the isopropyl alcohol with water in a measuring cup, ensuring the solution is equal parts water and alcohol. If you don’t have a measuring cup, try using a shot glass to measure quantities before mixing. In any case, just make sure you’re not overdoing it with the alcohol — the resulting solution shouldn’t be more than half alcohol or it could tarnish the display.
Step 4: Use the second lint-free cloth to dry your display. Don’t leave any moisture on it — you’ll want it to be completely dry before turning the TV back on.
We can’t just ignore the O.G. hardware. If you’ve still got an older tube-style TV hanging around the house and it simply refuses to die, here’s a quick how-to for getting the smudges and dust off of your old giant. Luckily, you’ll be able to use some household cleaners you probably have hanging around.
Step 2: Once the TV has settled down to room temperature, grab that same microfiber cloth you used for your prized living room QLED and wipe away any dust on the tube TV’s screen. Once the dust has cleared, you may still have fingerprints and other gunk to contend with.
Step 3: To clear the rest of the mess, you can use the same solution you put together to clean your high-end TV. If you’re lacking the materials to create this concoction, you can use a regular glass cleaner instead. This is because most older tube TVs actually have glass screens.
Important note: Do not under any circumstances use regular glass cleaner to clean an HDTV. The harsh chemicals used in the cleaner will damage the TV screen.
Additional tipsIf your TV’s bezel makes it difficult to clean the corners and near the edges of the display, use a cotton swab dampened with your solution to get to the hard-to-reach areas.
Make sure you’re using the right chemical. Don’t use ethyl alcohol, acetone, toluene, ethyl acid, ammonia, or methyl chloride — only isopropyl alcohol.
This is the ultimate guide to properly cleaning your flat-screen television without scratching it or causing any potential damage. Included in this guide will be the best cleaning techniques, as well as the ideal products to accomplish a brand-new appearance on your TV. This guide is full of must-have knowledge for absolutely anyone who wants their television to remain in pristine condition. As a bonus, this guide will also provide you with a detailed explanation and instructions on how to clean your TV remote control.
Nowadays, most televisions are manufactured with a soft plastic screen. As a result of this, TV screens are delicate and can be easilydamagedif cleaned with an improper solution or technique. Accidentally using the incorrect product on your television could result in permanent damage, such as fogging, discoloring, or scratching.
When cleaning a television screen, two different techniques work extremely well. The first technique focuses on spraying down a microfiber cloth and wiping the Televisions screen. Alternatively, you may spray a minimal amount of non-ammonia based cleaner onto the TVs screen and gently wipe it away. These two techniques are proven safe and will not result in any permanent damage to your TV’s screen, as long as you follow the necessary detailed instructions when performing the cleaning.
Certain products and items you never want to use on the screen of your TV since they will cause permanent damage. When gearing up to perform a television cleaning, you will want to avoid using regular tap water, wood-based wipes, isopropyl alcohol solution containing more than 50% alcohol, regular Windex, or any cleaners that are ammonia-based.
Many products that are not made specifically for cleaning electronics will harm your television. If regular tap water is used on the television screen, a visible residue will appear after the water has dried. Instead of utilizing tap water, you may choose to use distilled water combined with a microfiber cloth. The combination of distilled water with the microfiber cloth will cause any dust on the screen’s surface to cling to the damp cloth. Distilled water will also ensure that the anti-reflective coating on your TV’s screen does not become worn-out.
Though Windex is a common go-to product for cleaning many devices and appliances, using it on a television screen can cause permanent damage. The reason behind this is because Windex is an ammonia-based cleaner. Ammonia-based cleaners may cause a chemical reaction between the ammonia-based cleaner and the coating on the Televisions screen or cause clouding.
It is essential to avoid the use of any wood-based cleaning wipes on a TV screen. Wood-based cleaning wipes include paper towels, Kleenex tissues, along with any similar products. If wood-based wipes are used on the TV’s screen, there is a strong possibility that you would be left with a multitude of visible, permanent scratches on the screen. The reason why the scratching often occurs is how rough the fibers of these products are combined with how soft the screen on the TV is.
You have a few technique options to choose from when preparing to clean a TV screen. A 50% isopropyl alcohol-based spray, also known as a lens cleaner, is a simple option that many lean towards. When using an isopropyl alcohol spray, you will want to pay close attention to the level of alcohol in the spray and be sure to avoid any alcohol-based sprays that contain more than 50% alcohol, as this will over-dry the television screen.
When choosing to utilize the lens cleaner technique, you will also want to use a clean, soft microfiber cloth that does not shed any fibers. If the microfiber cloth does shed fibers, you will find that sometimes after you’ve already cleaned the TV, you have to clean it again. This is due to the small static electricity charge produced when wiping the TV’s screen, which will attract the fibers of a microfiber cloth.
Optionally, specific products are intended for use on electronics that are extremely gentle as they do not contain ammonia or alcohol. Windex makes a special electronics cleaner that works phenomenally and is highly recommended. Additionally, the product “Screen Mom” is specially formulated for televisions and is also a fantastic product.
If the television is not dirty but has acquired a collection of dust particles on the surface, compressed air may be the best option for this job. Using compressed air will inevitably eliminate the worry of causing potential damage to the screen since there is no possible way to damage the television with air. Compressed air is an easy, inexpensive, and fast way to clear any dust from the television, leaving the TV appearing brand-new.
The first option entails simply spraying the microfiber cloth down with the cleaning solution and using that to wipe the television screen. If this is the method that is chosen, you will want to be cautious of the amount of solution used. Ideally, the cloth should only be slightly damp after you’ve sprayed it down.
Accidentally applying too much solution onto the microfiber cloth and using the excessively wet cloth on the TV screen may result in permanent damage. When too much cleaning solution is applied to the TV screen, the cleaner tends to run down the screen into the bezel and any other nearby electronics.
Alternatively, you may mist the TVs screen directly with a small amount of the cleaning solution that you’ve chosen. Immediately after misting the screen, you will want to gently wipe away the mist with a microfiber cloth. If this is the option that you would like to utilize, be sure to be extremely careful to not spray too much cleaner onto the television – as this may drip onto the bezel along with any other nearby electronics very rapidly, resulting in permanent damage.
IMPORTANT: When wiping a television screen with any wipe, be sure to be gentle, and refrain from applying any excessive pressure. Applying too much pressure on the screen will result in distorted pixels.
Where can you purchase inexpensive microfiber wipes and ammonia-free cleaners? Both microfiber wipes and ammonia-free cleaners are commonly found at your local big-box stores such as Walmart, Home Depot, Lowes, Menards, and the Dollar Tree.
Microfiber cloths are commonly located in the automotive aisle of any big box store, and the lens cleaner can often be found bundled in kits for eyeglasses. Alternatively, Amazon possesses an extensive assortment of microfiber wipes and appropriate cleaning solutions that can be shipped directly to your door.
Recent studies from multiple universities have confirmed that the TV remote is the single dirtiest item in a typical home and is a hotbed for bacteria and viruses.
This is because the TV remote is one of the most overlooked household objects when cleaning a home. TV remotes are commonly touched multiple times a day by nearly every person in a household. However, no one ever thinks to clean it. The rubber buttons trap and preserve all sorts of dirt, skin flakes, and hair.
When performing a deep clean on your TV remote, all you need when performing a deep clean is rubbing alcohol, also known as isopropyl alcohol, which comes in a solution or a spray cleaner. Typically, you’ll find this at your local grocery, pharmacy, or hardware store as a 50% water and 50% isopropyl alcohol mixture. Combine this with a clean toothbrush, q-tips, and a microfiber cloth.
Next, use the isopropyl alcohol mixture and spray the microfiber cloth down, but you’re going to want to be sure to not overspray, leaving the cloth dripping wet, as that may cause damage to your remote.
You’re going to begin by taking the batteries out of your remote, so your TV doesn’t blow up while you touch all the buttons. Once your batteries are out, take a clean toothbrush, a motorized toothbrush preferably, and start brushing out the debris from between the buttons on your remote, starting at the top of your remote and making your way to the bottom.
If there are any tighter crevices that the cloth couldn’t get to, use a q-tip sprayed with the isopropyl alcohol-water mixture and deep clean between the buttons. Once finished, put the batteries back inside of the TV remote. You can rest easy knowing that the dirtiest part of your home is now the cleanest.
Let"s be real: Your TV screen is probably dirty. Sometimes, the dirtiness of a TV screen can go unnoticed, particularly if you spend a good amount of time watching bright, colorful content that minimizes the appearance of smudges and grime.
Like sunglasses, mirrors, and windows, TVs are best left free of smudge, spots, and fingerprints. Unfortunately, there"s a ton of misinformation out there about the best (and safest) ways to wipe away the blemishes on a TV. After all, these aren"t just any old surfaces—they"re expensive and often delicate pieces of technology.
Here"s the good news: Once you understand the basics, freeing your spot-covered TV of your kid"s oily palm prints couldn"t be simpler. Just remember: a clean screen means a clean scene.
Window cleaners contain harsh chemicals (like alcohol, ammonia, and lauramine oxide) that can do damage to LCD and OLED panels. One reason people assume that surface cleaners are still copacetic for TVs is because old-school CRT TVs could stand up against Windex, thanks in part to their glass screens. These days? The less liquid you use, the better.
Believe it or not, even the densest of fingerprints can be wiped away without the use of any moisture. It is important, however, to use the right type of cloth or towel when cleaning, otherwise you run the risk of scratching the panel.
Always use a microfiber cloth or towel—like the ones that come with a new pair of glasses—to clean your TV screen. Avoid using standard tissues or paper towels. Go to work on the problem areas with gentle, circular motions. Avoid applying too much pressure to the panel. If you"re dealing with some stubborn, oily stains that just won"t cooperate, resist the urge to exert more force. Instead, try moisturizing the cloth with a small amount of warm water.
Generally speaking, dedicated screen-cleaning solutions are OK for LCD/LED and OLED TVs, but if you decide to use screen cleaner, make sure the formula does not include alcohol or ammonia.
If you decide to use water or some sort of cleaner, do not spray the screen directly. Instead, lightly moisten your microfiber cloth before wiping the your TV screen.
The product experts at Reviewed have all your shopping needs covered. Follow Reviewed on Facebook, Twitter, Instagram, TikTok, or Flipboard for the latest deals, product reviews, and more.
When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.
To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.
You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.
Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.
The television screen is what everyone sees first, but don’t forget these other key areas, not to mention the area around your unit. “It can also help to clean the furniture and carpets around the TV to prevent dust and hair from getting into it,” says Williams.
The remote control is handled regularly. This is the one time when harsh chemicals can be used sparingly. Follow the manufacturer owner’s manual instructions first, but if sanitizing is needed, use a cleaner that’s at least 70 percent alcohol, according to the Centers for Disease Control (CDC) recommendations. (Basic drugstore isopropyl alcohol works well for this.)
Start the remote control cleaning by removing the batteries. As with the TV screen recommendations, you’ll want to avoid spraying directly onto the surface, as this could cause the device to malfunction. Dampen a clean microfiber cloth and rub gently on the top and the underside of the remote control. For hard-to-reach gunk that’s jammed between the buttons, try a cotton swab dipped in a small amount of the cleaning solution. Make sure to let it dry thoroughly before replacing the batteries and using it again.
When figuring out how to clean a TV screen, selecting the safest cleaning solution is key, but it’s also important to know what cleaning products to avoid. Keep in mind that not only should you skip cleaning with certain products, you should also avoid spraying them in close proximity to the TV.
Both Panasonic and Samsung both have lengthy “avoid” lists that include harsh chemicals such as wax, cleaning fluid, acetone, benzene, alcohol, thinner, mosquito repellent and insect spray (really!), lubricant, solvent and undiluted mild dish soap. These can, as Williams says, “cause clouding and can wear away your TV’s anti-glare coating.”
In terms of what to use, Samsung recommends “monitor cleaner only” (also called TV screen cleaner). Panasonic suggests “one part mild liquid dish soap diluted by 100 times the amount of water.” To make this cleaning solution, add a scant teaspoon of liquid dish soap to two cups of water, stirring well to dissolve.
Williams likes TV cleaning kits for their ease of use. “A TV kit will be your safest option for cleaning a TV,” he says. “These kits will come with everything you need to get your TV looking new, like screen-cleaning solvent and a fast-drying microfiber cloth.” You can find TV cleaning kits and cleaning products designed for flat-screen TVs at electronics stores or on Amazon.
Some people swear that only distilled water is useful as cleaning spray for their delicate electronics. Although Williams does not necessarily recommend using distilled water, if you know for a fact you have hard water in your area, you may want to try the distilled water route and see if you notice a difference. Hard water, which has high levels of calcium and magnesium, may leave a film or residue when it’s used for cleaning. Before you spray water to clean TV screens, try experimenting with tap water on a less-important screen, like an old cell phone, to assess the results.
If you can picture the hulking tube TVs (also known as CRTVs) of yore, you may also remember how delightfully easy they were to clean—a few spritzes of window cleaner and some wipes with paper towels and you were good to go—no special microfiber cloth required. But modern TVs with fancier technologies like LCD, OLED, and plasma call for gentler techniques. “Avoid using chemicals like alcohol, ammonia or acetones when cleaning your TV. These cleaners were safe to use for previous generations of TVs with glass panels, but as the hardware changes with time, the cleaning methods do too,” says Williams. Since some multi-purpose and glass cleaners are made with ammonia, skip the Windex.
Modern TVs are often smart TVs but the cleaning tips are the same as the ones for LCD, OLED and plasma TVs. The microfiber cloth is your TV screen’s best friend. “The majority of TVs you purchase today will be smart TVs, and the cleaning process is the same as TVs without smart capabilities,” Williams says.
This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.
Paper towels, tissues and toilet paper are all wood based products and the fibers in those materials will leave small scratches all over the tv screen. These scratches will be very noticeable from the right angle.
For example, Windex contains ammonia and Dawn Dish Soap contains small amounts of alcohol. Flat screen TVs can cost thousands so it’s important to understand how to maintain them properly.
The method you use to clean your tv screen with will vary depending on the degree of dirtiness, but no matter how dirty the tv gets you always want to use a microfiber cloth.
1. Turn off the TV. Turning off the TV will help you to see the dust better. Furthermore, this will also allow the TV to cool down. A hot TV is harder to clean than a cool one.
2. Dampen a microfiber cloth with water. I recommend using Distilled water as I find tap water tends to leave a residue. Ensure you ring the cloth out well to prevent excess water from dripping down the screen.
3. Wipe off the fingerprints. Apply light pressure and gently rub away the smudges with small circular motions. Also, avoid applying hard pressure as this can distort the pixels.
For a flat screen tv that’s mucky, grimy, greasy and resembles a child’s iPad…. the level 3 cleaning is for you!! For this, you will need an actual electronics cleaner.
The difference between electronics cleaners and household cleaners is that they don’t contain ammonia or alcohol. If you ever stumble upon an electronics cleaner that contains ammonia or alcohol it’s a scam and should not be used to clean your tv screen!!
No! Over time it will dry out the screen and ruin the tv. Instead clean your tv screen with an electronics cleaner designed for tvs.How do you clean smudges off of a flat screen tv?
Use a damp microfiber cloth and gently rub away fingerprint smudges with small circular motions. Additionally, only apply light pressure as hard pressure can distort the pixels.What should never be used to clean a LCD screen?
Stay away from household cleaners that contain ammonia or alcohol. Instead, opt for electronics cleaners designed for tvs. Furthermore, avoid using paper towels, tissues, or toilet paper as these products are wood based and the fibers will scratch the tv screen.What is the best screen cleaner?
Flawless screen cleaner does a great job. It can be purchased from Amazon, comes with a microfiber cleaning cloth and is safe to use on all LCD, LED and plasma screens.
To clean your remote, first pop out the batteries and replace the cover on the battery enclosure. Gently tap the remote against a hard surface, button side down, to break free any crumbs or dirt that may have lodged themselves inside the device.
Next, grab your moistened wipe and give it a good wringing so that it’s not sopping wet. Use it to clean both sides of the remote, paying special attention to any crevices you suspect are harboring dirt.
Your speakers likely have removable fabric covers, but you’ll want to check your owner’s manual just to be sure. If they’re removable, pop them off and use a vacuum extension to hoover up any dust, dirt, or lint that may be stuck inside of them. If your speaker covers are fixed into place, you can try vacuuming the outside of their covers or using a lint roller.
If your speakers are made of a nonporous material (like plastic or varnished wood) use a damp cloth to clean them, wiping with the direction of the grain, whether the cabinet is made of real wood or wood veneer. After, wipe down with a dry cloth.
Bungalow offers private rooms in shared homes that are more affordable than solo housing options in the same neighborhoods. Bungalow homes come with smart TVs, and wifi, utilities, and monthly cleaning are set up before you move in, so that coliving is seamless.Find a Bungalow near you.
Where would we be without TVs? With Netflix viewing rates going through the roof each year, our generation is one that loves to relax in front of the TV on a daily basis. Today’s generation loves nothing more than relishing in a new binge-worthy television series or spending hours in front of their TV playing high-resolution video games on their newest
Many people have invested in HDTVs in recent years but don’t know how to clean them. This article will guide you on the best way to clean your tv screen and keep them viewing friendly.
The worst thing that you can do when cleaning your HDTV screen is to use the wrong cleaning product. Doing so will risk not only the value of your TV and its functionality but, it will also mean the end to many enjoyable TV viewing opportunities.
There are many harsh chemical cleaning products on the market that have the potential to strip and harm the protective layer that is on TV screens. Cleaning products such as Windex that contain ammonia or alcohol should be avoided at all costs when cleaning your HDTV screen. It is also important not to spray liquid such as water directly on to the screen. Doing this can cause excess liquid to run down the screen and potentially come into contact with the TV’s internal hardware.
Materials such as paper or kitchen towels are far too rough and abrasive for cleaning the screen of a TV. These cleaning tools, when combined with enough pressure, can scratch the protective coating of the screen and will leave streaks on your HDTV screen.
Cleaning your TV screen doesn’t have to be a chore. Using the right products such as a dry microfibre cloth, like theW! Cloth, and wiping the screen lightly will get rid of any dust and dirt particles that are on your TV screen. Make sure not to use circular buffing motions but rather wipe up and down the screen in vertical lines.
For stubborn spots, consider spraying a small amount of an ammonia and alcohol-free cleaning product on to a microfiber cloth. For example,Screen Shineis a non-toxic cleaning product designed to both clean and protect your HDTV screen. It leaves an invisible and anti-static coating which resists dust, dirt and smudges.
Most importantly, always make sure that your TV, whether an HDTV or an LCD, is turned off before you begin to clean it. Not only is it easier to see any dirt that is on your TV screen but you will also reduce the risk of an electric shock happening.
Nobody enjoys when there are smudges or streaks on their TV screen, especially if they are permanent due to not cleaning your TV correctly. So, the next time you are watching TV take some time to see how the dirty the screen really is. The right cleaning products and a little TLC is a small price to pay for a clean and viewing friendly HDTV screen.
Before you give into your impulses and wipe your screen with whatever you have at hand, let us stop you right there. Your display is way more delicate than you think, and if you want it to last a long time in optimal conditions, you’ll need to treat it with proper love and care.
The good news is that cleaning a computer screen is more simple than you think. You only need a soft cloth, a tiny bit of water, and the most delicate of touches.
As you would expect, not all screens are created equal, and some are more delicate than others. The safest way to figure out the proper care for your screen is to search for the make and model of your device, find out if it has an LCD, LED, or some other type of display, and search for the manufacturer’s instructions on how to care for it.
If you want to skip all that, there’s an easy way to avoid making a mistake that might not only result in irreparable damage to your screen but to your entire device. According to Joe Silverman, owner of New York Computer Help, a tech repair center in New York City, no matter how much money you spent on your computer or tablet, it probably has an LED or an LCD screen if you bought it within the last three years—and neither type benefits from window cleaner or highly concentrated alcohol.
That’s the uppermost layer of your screen, which is extremely sensitive to the acidity in alcohol and in compounds like ammonia or propylene glycol. These are often present in cleaning agents such as window cleaners and degreasers. Using these liquids will corrode the surface of your screen, resulting in scratches or even smudges you won’t be able to get rid of.
“Underneath there it’s the most intelligent part of the laptop,” Silverman explains. “What happens is that the liquid will get through that first line of defense, and when it does that it’s going to really affect the sensors.”
Things get even trickier when you’re dealing with touchscreens. On models like the Microsoft Surface, the display is the main input—as opposed to your mouse or trackpad on a regular laptop—so it’s ultra-sensitive, Silverman says. Using a strong liquid cleaner like a degreaser or a bleach-based disinfectant can obliterate the top layer on the screen. Combine that with high pressure, and you can kiss your fancy touchscreen computer goodbye.
Another downside to newer computers is their size and weight. If you decided to splurge on a new laptop, for example, you probably found one that has top-notch components, but also a slick, lightweight design. This format is only possible if everything in your laptop is smaller and thinner. In the case of your display, a thinner screen means a weaker barrier between your computer’s guts and the elements in the outside world.
Caring for your screen is simple—it only takes a little bit of water and a dust-free cloth, such as a microfiber wipe or the piece of fabric that came with your glasses.
First, turn off your computer and disconnect the charger. This might sound paranoid, but the benefit is twofold—you avoid any chance of triggering an electrical surge, and your screen will remain black, which will make it easier to see any dirt and grime.
Pour a couple drops of water on your cloth. Forget paper towels or the sleeve of that soft cotton t-shirt you love—microfiber is your best bet. Still, no matter how soft it is, a dry wipe could always leave micro-abrasions on your screen. The moisture will also help gather dust and particles while lifting grease from your display.
Use circular motions starting in the center of your screen and moving outward, so you don’t leave any streaks. If you can see any droplets or water traces on the glass while you clean, you’ve used way too much water. Gently dab the residual H2O with an absorbent cloth or tissue paper and start again.
If you’re dealing with next-level gunk, you can use isopropyl alcohol at 70 percent or lower, Silverman says. “That percentage is very important,” he explains. “We’d only use 90 percent or higher on dummy parts that don’t have sensors, like top cases and keyboards.” In these extreme cases, spray the alcohol on the cloth, never directly on the screen, and wipe it gently.
Just like solar damage, screen damage is cumulative. The more pressure you apply, the more abrasive a product you use, and the more often you use it, the greater the damage you’re inflicting on the protective layer of your display and the delicate sensors underneath it.
Maybe you can get away with using a high percentage of alcohol or even a window cleaner on your computer screen once or twice. But if you keep at it, eventually you’ll see the deleterious effects.
“You’ll see discoloration, lines (vertical and horizontal); sometimes it looks pretty and rainbow-like,” Silverman says. “Sometimes it’ll blink and sometimes you’ll see droplets of water or liquid in the back of the screen. There’s a lot of ways in which damage appears.”
The best way to avoid damaging your screen while cleaning it is to simply keep it from getting dirty in the first place. If you have a laptop, cover the keyboard with a thin microfiber cloth before closing it to prevent finger grease from transferring to the screen. If you have a touchscreen, wash your hands often before you use it, but make sure you let your hands dry completely before you start tapping—the soapy water or liquid hand cleanser from your fingers can easily end up on the screen and corrode it.
Wet, newly washed hands can also be detrimental to regular computers. Silverman says he often sees such victims in his shop—computers completely dead after hand sanitizer rubbed off the owner’s hands, seeped through the keyboard, and ruined the inner guts of the machine.
Your phone was designed to be carried, dropped, tapped, swiped, smashed against your face for long periods of time, and stowed in the deepest corners of your bag. In other words, its screen is way more resilient than your computer’s.
Silverman explains that most iPhones and Samsung phones, for example, have screens made out of one thick piece of glass. These, as opposed to computer screens, have all the LCD layers fused together, making them much more difficult to damage. Still, if you’re using alcohol, he recommends keeping the concentration at 70 percent or lower, using a soft cloth, and applying only low pressure to get rid of any accumulated gunk there.
Be especially careful with charging ports, as contact with water (also present in rubbing alcohol) can damage the electronics inside your smartphone. Newer models often are resistant to liquids, but there’s always a threshold to how much they can withstand. And you probably don’t want to know what that is.
Replacing the screen of your computer or smartphone can be expensive, and even if that’s not an issue for you, no one wants their devices to fail when they need them the most. So remember these tips well—we hope you never have to read this article again.
We"ve all had that moment: You"re sitting at your computer or laptop and the light hits your screen in a way to reveal an unsightly accumulation of streaks, fingerprints, and dust.
To help, we round up the most important things to know about cleaning your computer screen, whether it"s a Mac or PC. While it"s a simple process, there are a few important rules to keep in mind to make sure you"re doing it safely.
Computer screens are not all made the same, and thus can"t all be cleaned the same way. You"ll want to be careful no matter your screen type, but it"s helpful to know that displays come in two categories:Glass-coated screens: The screens on newer iMac displays and MacBooks have a glass overlay. Glass displays are a little less delicate than LCD or LED screens, and mild cleaning solutions, like rubbing alcohol, are generally safe to use on them.
LCD or LED screens:Windows computers and most touchscreens and matte displays are typically not coated in glass. Extra care should be taken with these screens so not to damage the pixels that make up the display.
Since there are so many computers, laptops, and monitors out there, each with their own set of variables and specificities, it"s smart to just simply err on the side of caution.
To clean a computer screen, you really just need two things: A microfiber cloth and filtered or distilled water. That"s to say you don"t need a special store-bought cleaning solution.
If you"d like some extra sanitation power, an equal parts mixture of water and vinegar is safe no matter your screen type. If you know that your display is glass-coated, you can also use an equal parts mixture of water and 70% rubbing alcohol.What you needTwo lint-free microfiber cloths
d3sign/Getty ImagesTurn the computer or laptop off.For safety reasons, begin by letting the device cool down completely. Dust, fingerprints, and smudges are also easier to spot on a black screen.
Wipe off dust with a dry cloth. Use a dry, lint-free microfiber cloth to gently wipe away any visible dust and dirt. If necessary, apply gentle pressure to remove surface-level smudges.
If any marks remain, wipe with a lightly moistened cloth.For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.
Buff with a dry cloth and air-dry.If any streaks remain once the screen dries, gently buff them with the dry cloth. Before you turn your computer or laptop back on, allow the screen to dry completely.Note:Apple claims that you can use 70% isopropyl disinfecting wipes to clean any Apple product. Just remember not to get any liquid into the device"s ports or openings — to avoid this, you might want to wring out the wipe to remove any excess liquid before using it.
For the best advice for cleaning your screen, it"s a smart idea to check your owner"s manual, which provides the manufacturer"s specific recommendations. But since screens are especially susceptible to damage, there are a few general guidelines that apply, no matter the type of screen you own.
Turn off your computer before cleaning the screen. This is just safe practice where any amount of liquid is involved, but more specifically, any static on the screen could create a shock and damage the internal components.
Do not use abrasive cleaning solutions. This includes bleach (or any products containing bleach), hydrogen peroxide, or all-purpose spray cleaners. Using an abrasive cleaner can ruin the finish of your screen.
Use filtered or distilled water. Especially in areas with hard water, water containing minerals like calcium and magnesium can damage your screen or leave even more streaks.
Use only soft microfiber cloths.Even a fabric as soft as a cotton shirt has snags and uneven particles that can scratch a computer screen. For this reason, avoid T-shirts, towels, and paper towels. The exception is the Apple Pro Display XDR or iMac, which requires a special polishing cloth.
Never spray cleaning solution directly onto the screen. To avoid any risk of damage from excess moisture, mist the solution directly onto the microfiber cloth instead.
Do not wipe in circles. Wiping in circles can create uneven pressure and ultimately lead to screen damage. It"s also more likely to create streaking. Wipe in tight, Z-shaped motions, or in broad strokes from side to side.
Do not scrub.Apply gentle pressure only. Hard scrubbing can damage the internal components of the screen and could leave scratches or spots of discoloration or dead pixels that won"t go away.Melanie Weir
Melanie Weir is a freelance author for Insider, mainly focusing on the Tech Reference section, but occasionally contributing to Lifestyle and Entertainment topics as well. She is also a freelance writer for ScreenRant, and is the Lead Weekend News Editor at TheThings.com. In her spare time she writes plays for both stage and screen. She can be reached at melanie.weir1008@gmail.com, or through LinkedIn.
Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!
One of the most common questions I am asked, now that LCDs are in wide use, is how to clean one. Every manufacturer has their recommended method. What Envision recommends will ruin an NEC LCD and void your warranty. As you will be able to tell, every LCD needs to be cleaned in a different way.
Another thing I learned from finding all this information is that every manufacturer has the same warning: Never touch or press on the LCD screen with your fingers – NEVER!!! Doing so can cause the pixels to short out and die. Then you will have blank spots on your LCD.
Here is the cleaning information I have gathered from various manufacturer’s web sites. The text is taken verbatim from the manufacturer’s websites, “read-me” files, PDFs, and e-mails.
I called CTX tech support and was told the way to clean their LCDs was in the Technical Glossary and General FAQ. I asked the guy to check that out and he said he couldn’t find it either. He said to use very mild soap, tepid or lukewarm water, and a just slightly moist lint-free cloth. This is supposed to be added to their General FAQ.
Discussion: A common cause for marks on the LCD is oil and dirt deposited on the keys of the keyboard that can get pressed against the LCD when carried in a carrying case or when pressure is applied to the lid.
There are many cleaners sold specifically as LCD cleaners. These are perfectly acceptable for cleaning LCDs on Dell notebooks. If you do not wish to purchase one of these products designated specifically as an LCD cleanser, the following is a list of what is and is not acceptable for cleaning your LCD.
These cleaners might cause permanent damage to the LCD due to a chemical reaction. Some commercial window cleaners contain ammonia and are generally unacceptable.
Clean the computer’s built-in LCD display with a soft, clean cloth and one of the cleaners listed above or a commercial window cleaner that does not contain ammonia, wax, or abrasives. Apply the cleaner to the cloth, and then stroke the cloth across the display in one direction, moving from the top of the display to the bottom. If the display contains grease or some other contaminant, use a cloth with an acceptable cleaner listed above instead of a commercial window cleaner.
A. You can use Windex® to clean the screen and 409® clean the outer casing of the monitor. Please use a “soft” non-fibrous cloth to clean the screen. Do not use any paper products to clean the screen.
Shut down and unplug the computer and clean the LCD screen with a soft cloth moistened only with water. Wet the cloth, wipe the display, and then dry the screen with another soft cloth.
Gently dust the screen with a dry, soft, lint-free cloth. If the screen is still dirty, you can dampen the cloth with several drops of distilled water. Make sure the LCD panel is completely dry before you turn the display back on.[/box]
Soak a soft gauze cloth with isopropyl alcohol or ethyl alcohol diluted with water (1:1) and gently wipe the surface of the monitor. Do not dust it or wipe it with a cloth dampened with pure water.
CAUTION: Never use pure water to clean the LCD screen. Do not use cleaning solutions containing fluoride, acids, or alkalis. Do not use ketone substances such as acetone or solvents such as xylene or toluene to clean the monitor. Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor’s screen or cabinet. These chemicals may damage the monitor.
This is the strangest one ever. On March 21, 2003, I e-mailed every e-mail address I could find on Hyundai’s web sites. I guess I threw them for a loop because I received a phone call from a Peter at AVC Tech USA. That must be Hyundai’s USA distributor. Peter told me that Hyundai has NO written instructions for cleaning their LCDs. Quoting Peter this is what he told me to do: “use alcohol and soft cotton cloth and don’t run too hard”.
The display area is highly prone to scratching. Do not use ketone-type cleaners (i.e. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride to clean the panel. Doing so may result in permanent damage.
MAG was another hard one to get any information on. On April 21, 2003, I finally received an e-mail response (I sent my first request for information back on January 21, 2003). Here is the reply I received:
You can use regular Windex, just do not spray directly to monitor screen, spray to a soft rag or cloth and then wipe out gently, any other question please let us know and thank you for your time.
CAUTION: Do not use benzene or thinner or rubbing alcohol. Doing so may adversely affect the surface, e.g. discoloration. In addition, do not use commercially-available cleaners and cosmetics as they may contain components harmful to the surface.
Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based liquids.
A: For normal cleaning, use the clean, soft, and fine. For extensive cleaning, please use Isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.
If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen with only slight pressure. Too much pressure may damage the screen.
If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.
A: We recommend that you use a cleaner specifically designed for electronic equipment to clean the case and, if necessary, a separate cleaner specifically designed for cleaning LCD Panels. This should be used in conjunction with a soft, lint-free cloth.
A: Any cleaning solution should be applied to the cloth. Under no circumstances should you spray the cleaner directly onto the machine. The excess cleaner may find its way into sensitive areas of the machine and can cause severe damage.
A: In general, the answer to this question is yes. Most cleaners that are satisfactory for cleaning the case of your WinBook are not satisfactory for cleaning the LCD panel. You should look for a cleaner that is specifically designed and labeled for cleaning LCD screens.
A: You SHOULD NOT use any sort of harsh solvents to clean your WinBook. This includes fingernail polish remover, alcohol, turpentine, gasoline, lighter fluid, acetone, paint thinner, mineral spirits, kerosene, ammonia, dishwashing soap, glass cleaner, vinegar, or any other commonly found household cleaner.
Q: Where can I get these cleaners that I need to use on my WinBook?A: Most good computer stores will carry these cleaning supplies. Also, they may be found at local electronics stores or office supply stores.
As the weather warms, it"s time for everyone"s "favorite" pastime: spring cleaning. While you"re dusting off the shelves and shoveling out a winter"s worth of detritus, spare a moment to check your TV. Dust and grime can accumulate there, and over time it can become more and more noticeable. And if you have children, there may be an array of fingerprints and other smears on the screen.
The short version? Don"t use liquids, don"t press too hard, don"t use any traditional cleaners. Microfiber cloths are good, but be gentle. Modern TVs are predominantly plastic and therefore far easier to scratch than windows or your phone.
Want the longer version? Here"s what the top TV manufacturers say about cleaning their screens:Cleaning your 4K, OLED, or LED TV screen with a soft, dry cloth is recommended. The goal here is to avoid scratching the screen. Gentle, circular motions tend to give better results, since the circular motion hits each area from several angles in a single swipe.
Caution: Don"t spray water or other liquids directly on the TV, as electric shock could occur.Turn the TV off and let it cool down for a few minutes before unplugging it.
To clean the frame and screen, gently wipe it with a microfiber cleaning cloth. Make sure to wipe the TV frame and screen as gently as possible. TV screens are fragile and can be damaged when pressed too hard.
Important: Never use any type of window cleaner, soap, scouring powder, wax, or any cleanser with solvents such as alcohol, benzene, ammonia, or acetone. Never use abrasive pads or paper towels. If you do, you can scratch the screen or strip the anti-glare coating off the screen and cause permanent damage. Never spray water directly onto the TV. Make sure to wipe the TV as gently as possible. TV screens are fragile and can be damaged when pressed too hard.Gently wipe the screen or the exterior with a dry, soft cloth, such as an eyeglass cleaner.
For inks from oil markers on the screen, soak a cloth in a non-soap synthetic cleanser diluted (by less than 1% ) with water. Squeeze the cloth tightly to eliminate excess liquid, then wipe gently to remove the ink. Use non-soap cleansers cautiously because it may cause environmental problems when disposed improperly.
So why not Windex? Regular Windex is formulated for glass windows, plus a few other surfaces. It contains ammonia and alcohol, not the friendliest of chemicals. S. C. Johnson doesn"t explicitly say not to use Windex on TVs, but it offers Windex Electronics wipes and cleaners, so infer what you will. The better screen cleaners will clearly state that they do not contain alcohol or ammonia.
At last count, I found a billion companies making TV screen cleaners. Almost all of these are something like 99 percent water, 1 percent other stuff. Years ago I tested a handful and found them, on average, to work well enough. If you don"t have luck with a simple cloth and possibly distilled water, a screen cleaner is worth a try, and as a bonus you can also use it for your laptop, tablet and cell phone screens. Plus, they come with a microfiber cloth. If they don"t clearly state they don"t contain alcohol and ammonia, however, I would skip them.
So yeah, cleaning your TV is a good idea. But just remember that they"re exceptionally fragile. Why risk marring their surface by using cleaning methods the companies themselves don"t advise? If you damage your screen with cleaners, you won"t be able to fix it.
My advice? Get a nice microfiber cloth (if your TV didn"t come with one), and use that. If that doesn"t fix your smudges, try a cloth moist with water. Don"t press too hard. There"s less than a millimeter between your finger and a broken TV.
Screen cleaning kits are fine, though most people won"t need them. Remember, like all TV accessories, the store is selling them because they probably make more profit on that $20 kit than on a $500 TV.
As well as covering TV and other display tech, Geoff does photo tours of cool museums and locations around the world, including nuclear submarines, massive aircraft carriers, medieval castles, epic 10,000 mile road trips, and more. Check out Tech Treks for all his tours and adventures.
He wrote a bestselling sci-fi novel about city-size submarines, along with a sequel. You can follow his adventures on Instagram and his YouTube channel.
From the television to the computer to the tablets, screens and monitors are all around your house. As more and more devices move into the touch-screen mode, you may very well find you’re frequently cleaning TV screens and computer monitors. While you may be quick to grab some paper towels, glass cleaner and start wiping away, stop and ask yourself this: is this the best way to clean this screen? There are many different considerations for cleaning the screens and monitors in your house. Here’s a closer look at what you need to know.
Most of the TVs found in homes today have flat screen monitors and are quite different compared to screens on older models. Cathode Ray Tube (CRT) TVs of the past (like the big 1980s-style sets you may recall) had a thick glass screen that was relatively safe to wipe clean with paper towels and window cleaner. Not so with today’s flat screen models. Much of what’s on the market today has a liquid crystal display, or LCD, monitor that produces images. LCD televisions are also thinner and lighter than CRTs.
The make-up of an LCD monitor or screen, however, features a special type of material that is sensitive to chemicals, such as a glass cleaner. Likewise, a plasma display panel (PDP) is made with small cells that contain electrically charged ionized gases—the plasmas.
One of the most important steps to remember is to turn the device off before you begin cleaning. When the screen is dark it will be easier to see the dirty areas. Keep in mind that using harsh chemicals on these screens could ultimately damage or even ruin the television or computer. And it’s not just the cleaners you need to be aware of; kitchen towels or paper towels could also cause scratches and leave the screens covered in lint.
Knowing and understanding how to clean your screens and monitors can help ensure you’re able to use and enjoy your devices for years to come. Here are a few suggestions for properly cleaning these specialty screens.
Probably one of the most important considerations is to never spray any type of cleaning fluid or even water directly onto the screen. While the old CRT screens were pretty much water-tight, the same can’t be said for today’s modern screens. Screens today are made of layers upon layers of glass, plastics, various display elements, and other materials. When liquid comes in contact with the screen’s edge it can be pulled in, like a capillary, to the layers. Once this happens, you will likely notice something that looks like a blob on your screen, and the liquid will most likely never evaporate without leaving some remaining damage.
You may think that grabbing the bottle of glass cleaner you already have on hand is fine for cleaning screens and monitors. But think again. Using many of these common cleaning products can end up causing serious damage. Ammonia-based cleaners (such as traditional window cleaning spray), for example, could cause a chemical reaction with the coating on the screen or cause clouding. Some electronics stores sell specialty cleaners for use on screens, but you can also make cleaning solutions at home. One option is to combine equal parts of water and vinegar for a homemade cleaning product. But don’t spray anything directly onto the screen. Instead, spray the solution onto a lint-free cloth and gently wipe the surface.
Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.
You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.
If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.
For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.
A flawless piece of glass designed to transport you to different worlds, different time periods and down Coronation Street is only a scratch or smear or away from being ruined. So what cleaners and cloths are safe to use to clean your TV and avoid this happening?
Looking to upgrade to a new TV? Our expert lab tests reveal the best and the worst models. You can use ourTV reviewsto find a great model that"s the right size, spec and price for you.
Panasonic - gently wipe the display with a soft cloth. For stubborn dirt, dampen a soft cloth with clean water, or diluted neutral detergent (one part detergent to 100 parts water) wring out the cloth and wipe away the dirt. Wipe away any moisture when you"re done.
Samsung - unplug the TV and wipe the screen with a soft, clean, lint-free, dry cloth. You can spray screen cleaner onto the cloth first, but never on the screen. Let the screen fully dry before plugging the TV back in.
Sony - unplug the TV and clean the screen with a soft, dry cloth. You can dampen the cloth slightly with a solution of mild soap and warm water if needs be. Use small circular motions, then use a soft cloth to dry the screen.
There"s some differing opinion on whether water should be used. So be careful if you"ve got an LG TV, where no water or glass cleaner is recommended. This could affect your warranty, so stick to the official advice.
Before you start, unplug your TV.Use a dry soft cloth, ideally microfibre or similar to something you might clean a pair of glasses with. Don"t use a rough cloth or kitchen roll. The abrasive surface could scratch your screen.
Some TVs are less stable than others and you may need to support the back of the screen with your free hand - particularly OLEDs where the screen is incredibly thin at the top.
If there are any stubborn marks, use a water solution or specialist TV screen cleaner in line with your manufacturer"s policy. Put the solution on the cloth, not directly on the screen.
A clean screen is one thing, but there are numerous settings you can tweak to make sure you"re getting the best picture. Input your model into our tool ongetting the best TV pictureto see how to get your telly looking its best.
Nearly all the cleaners you use in your kitchen and bathroom could damage your TV screen. For the sake of simplicity, we"d recommend you avoid them all.
As much as possible, you want to use a dry cloth and only resort to a cleaning solution if there"s a mark that won"t come off with careful dry wiping.
TV ports, such as HDMI and USB inputs, can get dusty. If you haven"t used one of your HDMI inputs before and go to plug in a new device, you could push that built-up dust into your TV"s innards.
Wipe the ports with a cloth. If they"re particularly dusty, you can use a vacuum cleaner on its lowest setting to clear out any debris. Take care and hold the nozzle away from the TV as to not cause damage. Try not to push into the port since this could also damage the connection.