3.2 inch tft lcd screen module ultra hd 320x480 manufacturer

-LCD control IC ILI9341, touch panel controller XPT2046; Adopt industrial TFT LCD modules; High-grade gold-plated double yellow-module pin, better electrical properties; -Compatible with all hot Atom development boards, straight into the straight; -Application is fully open source; -Bottom-driven technical support LCD, a transaction, is a friend forever;

-3.2 inch, 240*320 resolution, TFT touch screen; -Display driver IC ILI9341, touch screen driver for XPT2046; 16bit-display interface parallel interface, support for 6800 and 8080 bus interface supports STM32 FSMC bus interface, crowding the screen faster; -Touch screen interface for the SPI interface, so that the line less, driving is simple; -Onboard-a large current LDO voltage regulator, 5V and 3.3V power supply; -Onboard PWM backlight control circuit to support IO control and PWM dimming control; -Modules with SD cards, digital photo frames and other experiments can be done; -Reserved SPI FLASH pad, you can extend the welded fonts chips; -Supports landscape and portrait displays, support split the screen display; -Support for 262,000-color RGB display and displayed good quality; -Graphic display of the screen controller with internal 172800 byte data storage; Punctuality Atom-interface compatible series of interface Development Board; Patch-machine production, stable and reliable hardware;

-Module design principle; -LCD controller data manual; -XPT2046 data sheet; -Module schematic diagram; -Module dimensions; -LCD package; MOD software-text; -Picture taking mode software; -C51 code wiring tutorial; -STM32 code wiring tutorial;

desertcart is the best online shopping platform where you can buy 3.2 inch TFT LCD screen module Ultra HD 320X480 for Arduino MEGA 2560 R3 Board from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the 3.2 inch TFT LCD screen module Ultra HD 320X480 for Arduino MEGA 2560 R3 Board to and more cities in Bermuda. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the 3.2 inch TFT LCD screen module Ultra HD 320X480 for Arduino MEGA 2560 R3 Board speedily without the hassle of shipping, customs or duties.

Yes, it is absolutely safe to buy 3.2 inch TFT LCD screen module Ultra HD 320X480 for Arduino MEGA 2560 R3 Board from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

※ Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

ER-TFT032-2 is 240x320 dots 3.2 " color tft lcd module display with ILI9320 controller and optional 4-wire resistive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 16-bit parallel interface. .FPC is soldering type,there is no need for zif connector.Lanscape mode is also available.

I purchased 2 screens and both have similar issues with colors. They are displaying content, but problem is that colors are not correct most of the time. It looks like always one of the RGB component is missing or not intensive enough, and it is totally random. Every time I turn on LCD it shows different spectrum and stays in that spectrum until next power cycle. I"m sure that it is not problem with libraries or my code because in rare occasions these panels shows correct colors and stays in correct color spectrum until next power off/on. I have others LCD screens which physically look like these (both 3.5" and 3.2") and these work correct all the time. I take photos of 4 consecutive powering of the same display. The most prominent difference can be seen on bar graph on the left (it should be pale yellow in original and here colors are from pale grey to yellow-greenish to purple-bluish). I cannot blame seller for this problem because displays came in OEM packaging and undamaged.

Ok, I played couple of days with these screens trying to achieve good and consistent color spectrum. I think that I finally made it to work. It seems that these displays came from factory with somehow wrong default settings for gamma and refresh rate. If you experience similar issues try to change data values in following commands: C0h, C1h, E0h, E1h, E2h, E3h and 36h. For example, I changed values for C0h to 0x1F for first register (sets VREG1OUT for positive gamma to 5.500V) and 0x01 for second (sets VREG2OUT for negative gamma to 3.625V). Please look at new picture below. It is much better than before. According to these new findings I will rate this product with 4 stars now...

TFT01 LCD is working at 3.3V voltage, it cannot be used directly on top of a standard Arduino board, so in order to make TFT01 LCD compatible for using on standard Arduino board, designed section TFT Shield, can be directly plugged into the Arduino board that use TFT01 LCD module.

TFT01 LCD 16 can support the current mode, since there is sufficient Mega2560 IO, while using only a touch screen interface or SD card interface, like in the case of face 328S will not exist.

TFT01LCD supports 8-bit mode, can use SD card interface and touch screen interface at the same time, adopts IC voltage division, makes the TFT display more stable

This LCD TFT01 Arduino Mega shield V2.2 is fit for 3.2 inch TFT LCD Module; The TFT01 MEGA shield supports 16-bit mode; Because of Mega board have enough pins for using SD card and touch function at the same time