raspberry pi 3 tft lcd in stock
The UCTRONICS 3.5 Inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well-mates with the Raspberry Pi boards. With a tiny size, vivid image, and responsive touchscreen, it is definitely ideal for portable devices and multimedia projects. It is a great replacement for a heavy and bulky HDMI monitor, keyboard, and mouse
Step1: Align the pin 1 of the edge connector between the LCD display and Raspberry pi board, connect the pin 1,2,3,4 then pin 19,20,21,22,23,24,25,26.
Attention: If you use this display without a Pi, the touch function is not available because the touch function of this display just supports the Raspbian system. Meanwhile, an extra HDMI cable also is required for the video transmission.
*****When the 5 inch monitor works with RI, it doesn"t need any external power supply. The power is supplied and can be touched by GPIO, display by HDMI. If it is powered by external power, there will be no touch function, and please use 5V2A power supply to power it.
This 3.5 inch TFT display can be used as an interface for the Raspberry PI, but also as a television, terminal, computer or another application where a 3.5 inch screen with a 1920 x 1080 resolution comes in handy. This display has an integrated HDMI driver, so no other hardware or drivers are required. With the compact HDMI plug, this screen can be easily connected to the Raspberry PI. The built-in touchscreen is very useful for providing input without external devices.
Create portable projects by adding a TFT screen to your Raspberry-Pi. Small, wide, touch screen, HDMI based, DSI based or GPIO"s based screens are availables from this categoy. All you need to transform your beloved Pi in an attractive, portable and interactive object. Exceptional add-on for an exceptional plateform.
It is the cutest display for the Raspberry Pi. It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay. It"s designed to fit nicely not only to the Pi Model A or B but also works perfectly fine with the Model B+/2B/3B/4B.
*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example on Bullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But on Buster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.