mikrotik lcd panel factory

Before the LCD touchscreen can be used, it needs to be calibrated at least once. After the first successful calibration, data is stored on the router. If no calibration values are present, calibration process will start automatically.

Take-screenshot function allows to create BMP image of currently displayed LCD screen and saves it in File List with specified name. Screenshots without file name are not saved, screenshots with an existing file name are overwritten.

Interfaces menu provide configuration for interface display timing in Stat Slideshow. Up to 10 additional (non-physical) interfaces can be added to the LCD.

A Page is an screen that can contain up to 12 interface bar graphs. Sub-menu allows to configure which interfaces are shown in a page. Up to 5 pages can be added to all interface graph screen and up to 12 interfaces per page. To add an interface to a page, it first must be added under /lcd interfaces sub-menu.

PIN code number allows to protect sensitive menus on the LCD screen. The PIN number will be asked if Read-Only mode is disabled and you add an IP address, reset or reboot the router. Default PIN is 1234

Since v6.0, LCD has a menu structure. Menu screens consist of buttons that are used to navigate the menus. A scrollbar is shown on the right side of the screen if it does not fit on the actual display. The screen can be dragged up or down to access more options if they are available. At the top of each menu screen is a "Back" button that jumps to the previous screen.

If the router has default configuration - user named "admin" with no password, then a warning on LCD will appear. This screen shows IP"s assigned to the interfaces which could be used to connect to the router.

Stat Slideshow screen is similar to the "Stats" screen, but the interfaces are switched after they timeout. Settings for slideshow are stored in RouterOS submenu /lcd interface

RB3011UiAS-RM - The RB3011UiAS-RM is a 10-port device and the first from MikroTik to be running an ARM architecture CPU for higher performance than ever before. The RB3011UiAS-RM is a 10-port device and the first from MikroTik to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a Superspeed full size USB 3.0 port, for adding storage or an external 3G/4G modem. The unit comes with a 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.

Product Features • ARM architecture CPU • More than 2 x performance of RB2011 series • 10 x Gigabit, USB 3.0 • LCD Display • Serial Console Port Product

• OS: MikroTik RouterOS, Level 5 license Product Includes (1) RB3011UiAS-RM (1) Power Supply (1) Rackmount Enclosure Technical Data Sheets and User Manuals RB3011UiAS-RM Data Sheet RB3011UiAS-RM Quick Setup Guide _DELETE_

This model has twelve SFP ports and one SFP+ port for 10G connectivity. It is available in a 1U rackmount case and also has a serial console port, a touchscreen LCD and a USB port.

RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

[ 0.000000] Kernel command line: benand_no_swecc lcd_ctrl=84 parts=1 boot_part_size=4194304 gpio=249403 HZ=300000000 mem=128M kmac=CC:2D:E0:03:8E:B1 board=2011r5 board=2011r5 ver=6.45.7 bver=3.41 hw_opt=00718004 boot=1 mlc=11 console=ttyS0,115200 rootfstype=squashfs noinitrd

Founded in Latvia in 1996, MikroTik is an industry leading network equipment manufacturer that is present in many countries around the world today. Since beginning as a wireless ISP systems manufacturer developing routers, MikroTik has continued to expand its brand, creating the RouterOS operating system and RouterBOARD hardware. Known for creating quality components at a low cost, MikroTik provides an excellent solution for securing and monitoring your network. Whether you are searching for a Mikrotik switch, a Mikrotik antenna, Mikrotik license or the newest Cloudcore router, we’ve got the solution for you.

Baltic Networks has been an Authorized MikroTik Partner since 2009. As distributors, we offer a complete line of MikroTik products including custom solutions made for Mikrotik that you won’t find anywhere else . As consultants, our MikroTik Certified Engineers offer a full spectrum of network engineering services with in-depth expertise of RouterOS, designing network infrastructure, troubleshooting, specific setup of VPN, bandwidth shaping and so on. As trainers, we are a Certified MikroTik Training Center offering a full spectrum of MikroTik training programs leading to a full certification as a MikroTik Certified Associate or Engineer.

RouterBOARD 2011UiAS-IN, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. RouterBOARD 2011UiAS-IN comes with desktop enclosure, LCD panel and power supply.

RouterBOARD 2011UiAS-IN, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

Find out the Mikrotik RB2011UiAS-IN Switch in stock and at the best price. Also have a look on our Networks sales and choose our best offers. Find the latest reductions and discover all our sales on Switches products at amazing discount prices! All this to ensure you get the cheapest deal every time at techinn.

If you are unable to manage your MikroTik device, you can factory reset by pressing the reset button. It may be a small pinhole, it may be a button on the side of the device, or for router boards you may need to short-circuit the board or a jumper.Turn of the power

Remember that even if you have no IP access to the MikroTik, you can always access it with Winbox using the "Neighbours" tab to access by MAC address, as long as you have a cable in the device WAN port. So if you are only missing IP connection to your router, you do not need to reset the configuration.

Any MikroTik includes both the user installed RouterBOOT (firmware) and OS, and a backup RouterBOOT (firmware). You can only update the user installed primary version.

If you have attached to the MikroTik with a serial cable, you can access advanced options in the RouterBOOT loader, see the options in the RouterBOOT wiki.

The export writes a text file with scripts for setting the entire configuration. The script file is fully interchangable between all MikroTik devices.

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, USB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129!

RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.