difference between lcd and tft display in mobiles free sample

TFT and LCD are two different types of electronic displays used in computers, TVs, and smartphones. However, they are not as different as you might think. Let’s start with what those abbreviations mean.

A key weakness of TFT panels is that they do not have wide viewing angles, so they are better suited to displays that require you to view head-on. This can be a good or a bad thing, depending on your needs. For example, the narrower viewing angles mean people sitting or standing around you are less likely to be able to snoop on what you are doing on your mobile phone.

TFT panels are cheaper to manufacture, but they also consume much more power than regular LCD panels. Lastly, they have poorer sunlight visibility. You will find TFT displays on feature phones, smart feature phones, and low-end Android phones.

LCD: This is an abbreviation for “liquid crystal display”. It is a flat panel display with wider viewing angles compared to TFT. They also have lower power consumption and so deliver much better battery life than their TFT counterparts.

In summary, while TFT panels have some distinct advantages, they fall short in other areas and so their use have been limited to low end phones, from feature phones to entry-level Android phones. Plastic feels inferior to touch than glass, which means that TFT screens don’t get to feature much on mid-range and premium devices.

As we see improvements to TFT technology, we will see them deployed on higher end devices over time. In 2022, Samsung used TFT displays in its mid-range Galaxy A13 and Galaxy A23. Perhaps those improvements are happening already.

For now, LCD is the most widely used display type in modern smartphones. At the very top end, we have premium flagships using OLED and AMOLED displays.

TFT displays are higher quality components than regular LCD displays. TFT displays are sharper, brighter, and refresh better than LCD panels. However, they have weaknesses that make them unsuitable for higher end phones.

AMOLED panels have all the benefits of OLED screens, which means they are better than LCD panels. They are expensive though, and so are used in high-end smartphones only.

These are improved versions of AMOLED screens and were developed by Samsung. They are also thinner. The name explains it: think of Super AMOLED as AMOLED on steroids.

Founder of MobilityArena. Yomi’s journey in mobile started in 2001. Besides obsessing over mobile phones, he also started creating WAP sites (early mobile-friendly websites created with WML). He began writing about phones in 2004 and has been at it since then. He has owned over 200 devices, from Symbian, Palm, PocketPC/Windows Mobile, BlackBerry/BB10, webOS, Windows Phone, Firefox, Ubuntu Touch, to Android, iOS, and KaiOS operating systems.Share This Article

In market, LCD means passive matrix LCDs which increase TN (Twisted Nematic), STN (Super Twisted Nematic), or FSTN (Film Compensated STN) LCD Displays. It is a kind of earliest and lowest cost display technology.

LCD screens are still found in the market of low cost watches, calculators, clocks, utility meters etc. because of its advantages of low cost, fast response time (speed), wide temperature range,  low power consumption, sunlight readable with transflective or reflective polarizers etc.  Most of them are monochrome LCD display and belong to passive-matrix LCDs.

TFT LCDs have capacitors and transistors. These are the two elements that play a key part in ensuring that the TFT display monitor functions by using a very small amount of energy without running out of operation.

Normally, we say TFT LCD panels or TFT screens, we mean they are TN (Twisted Nematic) Type TFT displays or TN panels, or TN screen technology. TFT is active-matrix LCDs, it is a kind of LCD technologies.

TFT has wider viewing angles, better contrast ratio than TN displays. TFT display technologies have been widely used for computer monitors, laptops, medical monitors, industrial monitors, ATM, point of sales etc.

Actually, IPS technology is a kind of TFT display with thin film transistors for individual pixels. But IPS displays have superior high contrast, wide viewing angle, color reproduction, image quality etc. IPS screens have been found in high-end applications, like Apple iPhones, iPads, Samsung mobile phones, more expensive LCD monitors etc.

Both TFT LCD displays and IPS LCD displays are active matrix displays, neither of them can produce color, there is a layer of RGB (red, green, blue) color filter in each LCD pixels to make LCD showing colors. If you use a magnifier to see your monitor, you will see RGB color. With switch on/off and different level of brightness RGB, we can get many colors.

Neither of them can’t release color themselves, they have relied on extra light source in order to display. LED backlights are usually be together with them in the display modules as the light sources. Besides, both TFT screens and IPS screens are transmissive, it will need more power or more expensive than passive matrix LCD screens to be seen under sunlight.  IPS screens transmittance is lower than TFT screens, more power is needed for IPS LCD display.

Thanks for the display technology development, we have a lot of display choices for our smartphones, media players, TVs, laptops, tablets, digital cameras, and other such gadgets. The most display technologies we hear are LCD, TFT, OLED, LED, QLED, QNED, MicroLED, Mini LED etc. The following, we will focus on two of the most popular display technologies in the market: TFT Displays and Super AMOLED Displays.

TFT means Thin-Film Transistor. TFT is the variant of Liquid Crystal Displays (LCDs). There are several types of TFT displays: TN (Twisted Nematic) based TFT display, IPS (In-Plane Switching) displays. As the former can’t compete with Super AMOLED in display quality, we will mainly focus on using IPS TFT displays.

OLED means Organic Light-Emitting Diode. There are also several types of OLED, PMOLED (Passive Matrix Organic Light-Emitting Diode) and AMOLED (Active Matrix Organic Light-Emitting Diode). It is the same reason that PMOLED can’t compete with IPS TFT displays. We pick the best in OLED displays: Super AMOLED to compete with the LCD best: IPS TFT Display.

If you have any questions about Orient Display displays and touch panels. Please feel free to contact: Sales Inquiries, Customer Service or Technical Support.

Have you ever wonder where TFT derive from?  Why is TFT referred to as LCD?  The phenomenon started in early days, when bulky CRT displays were thing of the past and LCD was its replacement, but as time progresses, there were still room for improvement, which leads to the birth of TFT’s.

TFT is a variant of an LCD which uses thin film transistor technology to improve an image quality, while an LCD is class of displays that uses modulating properties of liquid crystals to form what we call an LCD (liquid crystals display) which in fact does not emits light directly.

Even though LCDs were very energy efficient, light weight and thin in nature, LCD were falling behind to the CRT display, which  then leads to a change in LCD manufacturing, where performance became a big problem.

For example, having a 2001 Mustang vs a 2014 Mustang, the dimensions and engine of the 2014 has been redesign for performance reasons, not mentioning user friendly, so does the LCD to TFT.

Back in the day, wafers were cut to accommodate transistors similar to the way chip makers fabricate silicon wafers with the layout transistors which is known as the masking technique, to produce microprocessor.

As the birth of TFT, the elements are deposited directly on the glass substrate which in fact the main reason for the switch was because TFTs are easier to produce, better performance in terms of adjusting the pixels within the display to get better quality.

LCDs became ineffective over a period of time, almost all aspect of watching a TV, playing video games or using a handheld device to surf the net became daunting, this phenomenon is known as high response time with low motion rate.

Another problem with LCD was crosstalking, in terms of pixelating, this happens when signals of adjacent pixels affects operations or gives an undesired effect to the other pixel.

As TFT’s become very popular throughout the century due to its elaborate low charge associate and outstanding response time, LCDs became a thing of the past, and TFT became the predominant technology with their wider viewing angles and better quality this technology will be around for a long time.

TFT is an abbreviation for Thin Film Transistor, a flat panel display used to improve the operation and utility of LCD screens. In order to portray an appearance to the audience, a liquid crystal display (LCD) utilizes a crystalline-filled fluid to modify rear lighting polarized origin through the use of an electromagnetic force among two relatively thin metal wires such as indium oxide (ITO). However, color TFT displays are associated with this method, which can be employed in both divided and pixelated display systems.

With motion pictures displayed on an LCD, the intrinsic sluggish rate of increase between liquid phases over a significant number of pixel components can be an issue due to capacitance impacts, which can create a blurring of the visuals. Placing a high-velocity LCD control device inside the formation of a thin-film transistor immediately next to the cell component just on a glass screen, the issue of LCD picture speed may be substantially improved, and image blur can be eliminated for all useful purposes entirely.

Organic light-emitting diodes (AMOLEDs) are a type of flat light-emitting advanced technologies that are created by interspersing a succession of organic thin sheets over two conducting conductors. An electrical charge causes a brilliant light to be produced when the current flows. AMOLED displays are light-emitting screens that do not require a backlight, making them thinner and more energy-efficient than liquid crystal displays (LCDs) (which will need a white backlight).

AMOLED displays are not only thin and fuel-intensive, but they also deliver the highest image quality available, so they can be made translucent, elastic, bendable, or even rollable and stretchy in the future, allowing for a variety of applications. AMOLEDs are a revolutionary technology in terms of display devices! It is possible to create an AMOLED by sandwiching a sequence of thin films across phase conductors. Electric charge causes a brilliant light to be emitted when the current flows through the coil.

The color display is fantastic. Color intensity, sharpness, and luminance settings that are second to none and can be customized to meet the needs of any application.

Half-Life has been expanded. TFT displays have a far longer half-life than its LED equivalents, and they are available in a number of sizes, which might have an effect on the device"s half-life based on the phone"s usage as well as other variables. Touch panels for TFT screens can be either resistant or capacitance in nature.

As it is more affordable than capacitive, resistive is typically the preferred option. However, capacitive technology is compatible with a wide range of contemporary smartphones and digital gadgets.

Due to the apparent glass panels, there is limited functionality. For instance, there are ineffective for outdoor use because the glass can display glares from its natural lighting)

They rely on backlight to give illumination rather than generating their own light. Hence they require constructed light-creating diodes (LEDs) in their backlit display framework to ensure enough brightness.

Backlighting is unnecessary for AMOLEDs. LCDs produce images by selectively blocking parts of the illumination, whereas AMOLEDs produce light. AMOLEDs utilize less energy than LCDs since they don"t need backlighting. This is critical for battery-powered devices such as phones.

While AMOLED light-emitting sheets are lightweight, the substrate can also be elastic rather than stiff. AMOLED films are not limited to glass-like LEDs and LCDs.

AMOLEDs offer 170-degree ranges of vision. LCDs operate by obscuring the light. Hence they have intrinsic viewing obstacles. In addition, AMOLEDs have a substantially wider viewing spectrum.

AMOLEDs outperform LEDs. Since AMOLED organic coatings are less than LED inorganic crystal levels, AMOLED conducting and particle emitters layers can just be multi-layered. Also, LEDs and LCDs need glass backing, which absorbs light. AMOLEDs don"t need it.

AMOLEDs seem to be simpler to implement and larger. AMOLEDs are constructed of polymers and may be produced into big sheets. It takes a lot of extra liquid crystals to build and set down.

While red and green AMOLED sheets have a greater lifespan (46,000 to 230,000 hours), azure compounds have significantly shorter longevity (up to roughly 14,000 hours).

Due to the fact that AMOLED displays inherently emit illumination, they do not need a backlight when used on a monitor screen. Conversely, LCDs require backlights since the liquid crystals themselves are incapable of producing light under their own. Direct light emission from AMOLED displays also allows for the developing of lightweight display devices than others using TFT LCDs.

LCD displays have a higher brightness than AMOLED panels. This is owing to the LCD"s usage of led backlight, which may provide a brilliant illumination of the entire display. Despite the fact that AMOLEDs produce high levels of brilliance from their illumination, they will never be able to match the intensity of LCD lighting.

LCD screens use less power than AMOLED displays, which provides a slight advantage. The amount of energy consumed by AMOLED displays is dependent on the intensity of the screen. Lowered luminance results in lower energy usage, however, it might not be the best solution because the contrast would suffer as a result of the decreased brightness. In some situations, such as when to use an AMOLED device in direct sunlight, it is not an optimal situation.

However, the backlit keys of TFT displays account for the majority of their power usage. TFT screens" efficiency is considerably improved when the backlight is set to a lesser brightness level than the default setting. For example, replacing the light of an LCD TV with just an Led flash will have no effect on the image quality, but will result in lower power usage than replacing the light of an AMOLED TV.

With the exception of phones, numerous other technologies make use of displays to allow customers to engage in direct communication with them. To determine whether or not TFT LCD will be able to withstand the development of AMOLED innovation, we should first review the benefits of LCD technology. The backlighting quality ensures that whites are strong and brightness is superb but will deplete a battery much more quickly than just an AMOLED display. Furthermore, the cost of LCD screens is a considerable consideration. In addition to being less expensive and more easily accessible, they are produced in standard industry sizes, allowing them to be purchased for innovative products with relative ease.

For years, TFT displays have been the dominating technology in visualization. TFT LCD displays are everywhere in our daily lives; in consumer electronics, health care, communication devices and industry applications. While there are many LCD products in the market, they are not always suitable for every application. This is especially true for industrial TFT LCD. Understanding different requirements between industrial display and consumer TFT LCD, will help determine the best TFT LCD for your application.

Consumer grade TFT LCD like cell phone screen and computer monitor occupy big chunk of LCD market. Due to the nature of consumer market, competitive pricing and quick production cycles, these TFT LCDs are lack of the durability that industrial LCD has. Not like our cell phone screen and computer monitor, industrial LCD displays are used in much challenging environments. For example, an TFT LCD display on production line will face constant vibration, high working temperature. Its endurance to outside condition is a must.

Industrial TFT LCD has very good visibility. Which includes wide viewing angle, so that staff on production line can easily read information from different angles.

Sunlight readable is another important aspect that industrial TFT LCD persists. Many industrial applications are used outdoor, under direct sunlight. And user needs to be able to read what is on LCD screen easily. Topway has years experience on producing sunlight readable TFT LCD by using high brightness LED backlight and low reflectance technologies.

Industrial TFT LCD is made with high quality industrial grade components and material. Only then we could produce high quality TFT display that survives rigid tests like ESD, EMI and aging test, etc. All LCD product from Topway went through strict testings before reaching customers" warehouses.

Industrial TFT LCD has way longer supply commitment than consumer LCD. Ever try to fix a 2~3 years old cell phone"s crack screen? It is very difficult and expensive. Because replacement LCD screen is no longer being made. On the other hand, industrial LCD screen usually is in production for 10 plus years. And most of the time, for Topway anyway, there will be an upgrade model to replace end-of-life product. Thus, our customers won"t need to do much change on their product.

Industrial TFT LCD is a lot better in many areas than consumer one, even they look similar in normal situation. Topway as an industrial TFT LCD manufacturer, has been designing and producing industry grade LCD for more than twenty years. Our commitment on quality and customer service wins Topway friendship and orders. Please feel free to leave us message on your next industry project.

TFT displays are also known as an “Active Matrix TFT LCD module” and have an array of thin film transistors fabricated on the glass that makes the LCD. There is one of these transistors for each pixel on the LCD.

LCDs use voltage applied to a field of microscopic liquid crystals to change the crystal’s orientation, which in turn changes the polarization of the liquid crystal which creates light or dark pixels on the display.

These pixels are arranged to create characters or graphic images. This type of display may be sunlight-readable and may have a backlight, which allows it to be viewed in dark areas.

Beautiful, complex images: All of our TFT modules are full-color graphic displays. Unlike standard monochrome character displays, you can create complex images for an imaginative user experience.

Thin and light: These are ideal display modules for handheld devices, communications equipment, information displays, and test and measurement equipment.

Single Supply: Most of the TFTs use an integrated controller with built-in voltage generation so only a single 3.3v supply is needed for both the panel power and logic voltage.

Many of our character LCD modules use a standard HD44780 controller, so they can be quickly integrated into a new product or used as a replacement in your existing products.

Many of the LCD controllers on board our graphic LCD display modules also include a CGROM (character generator ROM) which allows for easy character information as well as full bit-mapped graphic information to be shown.

Some of the graphic LCD displays have the ability to render graphics in grayscale, enabling you to show images and elements of your UI (user interface) with more depth and definition.

Because OLEDs are emissive, these displays can always be used in dark environments. There is usually a software command or hardware setting that will allow OLEDs to be dimmed.

Some OLED displays are bright enough to be sunlight readable–these models will typically take more current and may have a shorter rated lifetime. Additionally, OLEDs have extremely wide viewing angles.

What makes OLEDs useful for display construction is that they can be fabricated in bulk. Using OLED fabrication techniques, all the diodes can be made at the same time, at a much lower cost. OLEDs also come in a wide variety of colors.

These days you really only have two choices of screens when you are buying a smartphone or tablet: LCD or AMOLED. Many of you probably can’t tell the difference between the two screen types, but both technologies have inherent strengths and weaknesses. LCD has been around for a while, but AMOLED phones are gaining popularity thanks to Samsung and other manufacturers. There isn’t a clear winner at this point in time, so here’s a look at both.

Update:Thisarticle was originally published on June 18, 2012, and updated on Aug. 25, 2014, to reflect recent devices. DT writer Aaron Liu contributed to this article.

LCD, Liquid Crystal Display, has been a part of our lives for years now. Besides mobile devices, we see LCD screens being used with almost every computer monitor, and in the majority of TVs. While these screens are made of wondrous liquid crystals, they also require a couple panes of glass, and a light source. LCD screens produce some of the most realistic colors you can find on a screen, but might not offer as wide of a contrast ratio (darker darks and brighter brights) as an AMOLED screen.

Some common terms you will find associated with LCD displays are TFT and IPS. TFT stands for Thin Film Transistor, which makes the wiring of LCD screens more efficient by reducing the number of electrodes per pixel. One benefit of TFT displays is an improved image quality over standard LCD screens. Another popular LCD technology is In-Plane Switching, or IPS, which improves upon TFT by offering much wider viewing angles and color reproduction on LCD screens. IPS screens are able to achieve this by keeping all the liquid crystals parallel to the screen. IPS is generally preferable to standard TFT.

AMOLED, Active Matrix Organic Light Emitting Diode, technology has grown in popularity in recent years, particularly among Samsung products. AMOLED screens consist of a thin layer of organic polymers that light up when zapped with an electric current. Due to this simple construction, AMOLED screens can be extremely thin and do not require a backlight. The benefit of losing a backlight is readily apparent: these screens are able to produce blacks so deep that the screen pixels can shut right off. Shutting off pixels can also save electricity and battery life in phones and tablets. Just keep your backgrounds close to black and you’ll save energy.

Sometimes when you read about AMOLED screens, you might hear people complaining about something called a “pentile” display. This is a feature of most color AMOLED screens. Instead of having just a single red, blue, and green sub pixel per actual pixel, pentile displays have a RGBG sub pixel layout which has two green sub pixels for each red and blue. The positive of this technology is that you are able to create a screen that is just as bright as normal screens with one third the amount of sub pixels. The negative of pentile screens is that they can appear grainy, or appear to be lower resolution due to the larger, more visible sub pixels. For a while, Samsung begun using a display type called Super AMOLED Plus, which does not use a pentile sub pixel layout and also improves viewability in direct sunlight — traditionally a weakness for AMOLED. Samsung equipped the Galaxy S II with a Super AMOLED plus screen, but then reverted back to Super AMOLED screens for the Galaxy S III, citing screen life as the reason for the switch.

There are pros and cons for each type of screen, and both screen technologies can produce vivid, beautiful displays. The only way to know for sure if the screen on your future device will satisfy you is to try it out for yourself. You will be able to easily see if the screen viewing angles, contrast ratio, and color reproduction will fit your needs after using the phone for just a few minutes.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

IPS (In-Plane Switching) lcd is still a type of TFT LCD, IPS TFT is also called SFT LCD (supper fine tft ),different to regular tft in TN (Twisted Nematic) mode, theIPS LCD liquid crystal elements inside the tft lcd cell, they are arrayed in plane inside the lcd cell when power off, so the light can not transmit it via theIPS lcdwhen power off, When power on, the liquid crystal elements inside the IPS tft would switch in a small angle, then the light would go through the IPS lcd display, then the display on since light go through the IPS display, the switching angle is related to the input power, the switch angle is related to the input power value of IPS LCD, the more switch angle, the more light would transmit the IPS LCD, we call it negative display mode.

The regular tft lcd, it is a-si TN (Twisted Nematic) tft lcd, its liquid crystal elements are arrayed in vertical type, the light could transmit the regularTFT LCDwhen power off. When power on, the liquid crystal twist in some angle, then it block the light transmit the tft lcd, then make the display elements display on by this way, the liquid crystal twist angle is also related to the input power, the more twist angle, the more light would be blocked by the tft lcd, it is tft lcd working mode.

A TFT lcd display is vivid and colorful than a common monochrome lcd display. TFT refreshes more quickly response than a monochrome LCD display and shows motion more smoothly. TFT displays use more electricity in driving than monochrome LCD screens, so they not only cost more in the first place, but they are also more expensive to drive tft lcd screen.The two most common types of TFT LCDs are IPS and TN displays.

Primed goes in-depth on the technobabble you hear on Engadget every day -- we dig deep into each topic"s history and how it benefits our lives. Looking to suggest a piece of technology for us to break down? Drop us a line at primed *at* engadget *dawt* com.

The quality of a mobile phone"s display is arguably the most important factor to consider when you establish a relationship with a handset. It"s inescapable, really. Whether you"re playing a rousing game of Robot Unicorn Attack or (regrettably) drunk-dialing an ex, it"s the one interface element that you"re consistently interacting with. It"s your window to the world and your canvas for creation, and if it"s lousy, it"s going to negatively influence everything you see and do. Today, we"re delving into the world of mobile displays, where we"re aiming to entertain and edify, and hopefully save you from making regrettable decisions -- when it comes to purchasing new phones, anyway.

In this edition of Primed, we"ll be examining the different qualities and underlying technologies of several displays, starting with the ubiquitous TFT-LCD and moving through the nascent realm of glasses-free 3D and beyond. We"ll also be addressing the importance of resolution and pixel density. Finally, we"ll be scoping out a handful of upcoming technologies -- while some are thoroughly intriguing, others are just plain wacky. Go ahead... buy the ticket, take the ride, and join us after the break. It"s Primed time.

Generally speaking, two display types rule today"s mobile phones: the Liquid Crystal Display (LCD), and the Organic Light-Emitting Diode (OLED). While each technology carries a set of strengths and weaknesses, a very important distinction can be drawn between the two. The LCD uses the light modulating properties of liquid crystals (LCs), but LCs don"t emit light directly. As such, a light source is necessary for proper viewing. Conversely, the OLED uses organic compounds that illuminate when exposed to electric currents. As backlights aren"t necessary for OLEDs, they"re significantly thinner than traditional LCDs. All things equal, OLED phones should be slimmer than their LCD counterparts, but this isn"t always the case. Take for example the MEDIAS N-04C, which uses a TFT-LCD and measures 7.7mm thin, versus the Galaxy S II, which uses the latest Super AMOLED Plus display and is 8.5mm thick.

The most desirable phone displays today are variants of these two technologies. In the LCD camp, there"s the Super LCD (S-LCD) and the IPS display -- with the latter as the basis for the Retina Display and the NOVA display. Likewise, the OLED territory is filled with options such as Super AMOLED, Super AMOLED Plus and ClearBlack. We"ll discuss the important distinctions between these competing display types shortly, but first let"s develop a fundamental understanding of how these brilliant creations work and how they came to be.

The story of the LCD began in 1888 when cholesterol was extracted from carrots. Think we reached too far back? Not if you"ve ever wondered what liquid crystals are. You see, a botanist named Friedrich Reinitzer discovered this extract had two distinct boiling points and observed the molecule"s ability to transmute from liquid to a crystalline structure in the interim. Even more shocking, the cloudy substance was able to reflect circularly polarized light and rotate the light"s polarization. (This little tidbit will become important when we discuss how LCDs operate.) While liquid crystals appear throughout nature, it wasn"t until 1972 -- when 5CB (4-Cyano-4"-pentylbiphenyl) was synthesized -- that they became commercially viable. A first of its kind, 5CB was chemically stable and entered its nematic phase at room temperature. While there"s actually three phases of liquid crystals, we"re most interested in the nematic one. This describes a state where molecules flow like liquid and self-align in a thread-like helix -- and coincidentally, are easily manipulated with electricity.

Now that you"ve got a little background about liquid crystals, let"s examine how they"re used in LCDs. Let"s start by making a sandwich. As our bread, we"ll take two polarizing filters, one which polarizes light on the horizontal axis and the other on the vertical axis. If we take the slices of bread and hold them up to a light source, nothing is going to pass through. Remember when we said liquid crystals have the ability to rotate light"s polarization? Yeah, they"re a critical ingredient in our sandwich because they determine light"s passage. When nematic crystals are in their natural (or relaxed) state, they form a twisted helix. As light travels through the molecule structure, its polarization is rotated by 90 degrees and light is allowed to pass through the top filter. Conversely, when voltage is applied to the LCs, the helix is broken and light can"t escape the polarizing filters. If you"re keeping score, this is known as the twisted nematic field effect. Going back to the sandwich analogy, the nematic crystals are placed between two layers of transparent electrodes which apply voltage to the liquid crystals. It"s a rather simplistic sandwich, but it describes the fundamentals of how LCDs work. For you visual learners, Bill Hammack does an excellent job of explaining these concepts in the following video.

Now let"s apply this knowledge to the modern TFT-LCD that you"re familiar with. It"s the basis for twisted nematic (TN) and in-plane switching (IPS) displays, and both technologies rely upon the thin film transistor (TFT) for the quick response time and image clarity that we take for granted. Fundamentally, the TFT is a matrix of capacitors and transistors that address the display pixel by pixel -- although at a blistering speed. Every pixel consists of three sub-pixels -- red, green and blue -- each with its own transistor, and a layer of insulated liquid crystals are sandwiched between conductive indium tin oxide layers. Shades are made possible by delivering a partial charge to the underlying LCs, which controls the amount of light that passes through the polarizing filter, thus regulating the intensity of each sub-pixel.

The most common LCD display is based on TN technology, which has been successful due to its relatively inexpensive production costs and fast refresh rates. Many of you will remember the shadow-trail that plagued early LCDs, and faster refresh rates reduce this effect and make the displays better suited for movies and games. Unfortunately, TN displays are famous for exhibiting poor viewing angles and most aren"t capable of showing the entire 24-bit sRGB color gamut. In attempt to mimic the full range of 16.7 million colors, many screens implement a form of dithering to simulate the proper shade. Basic TN screens are hardly fantastic, but they"re also good enough to survive the day without eliciting too many complaints.

IPS displays were created to resolve the long-standing problems of poor viewing angles and color reproduction of their TN counterparts. The fundamental difference between the two technologies is that liquid crystals run parallel to the panel rather than perpendicular. This alignment allows for wider viewing angles and more uniform colors, but at a loss of brightness and contrast. Traditionally, IPS panels were significantly more expensive than TN alternatives, but recent advances have lowered the production cost and improved the brightness and contrast issues. This technology is the basis for Apple"s Retina Display and the NOVA display -- both of which are manufactured by LG.

Another technology that"s gotten plenty of airtime is the Super LCD (S-LCD), which is a display that"s manufactured by a joint-venture between Sony and Samsung. It employs an alternate method to IPS and TN that"s known as super patterned vertical alignment (S-PVA). Here, the liquid crystals have varying orientations, which help colors remain uniform when viewed from greater angles. S-LCDs also feature improved contrast ratios over traditional TN displays, which exposes a greater amount of details in dark images. Further, these displays feature dual sub-pixels that selectively illuminate based on the brightness of the screen. As you can imagine, this provides power-saving benefits, along with refined control of colors on the screen.

Now, let"s take a look at OLEDs, which are a staple of many high-end phones today. As we"ve mentioned, these displays operate without a backlight. Instead, they use electroluminescent organic compounds that emit light when they"re exposed to an electric current. The main advantages of OLEDs include deeper black levels (because there"s no backlight), enhanced contrast ratios, and excellent viewing angles, while drawbacks include reduced brightness and colors that are often over-saturated. OLED screens also suffer an awkward aging effect, where the red, green and blue sub-pixels will deteriorate and lose efficiency at different rates, which causes brightness and color consistency to worsen over time. While improvements are being made, it"s important to understand that this display technology is still relatively immature.

You"re most likely familiar with the active-matrix OLED (AMOLED), which relies on a TFT backplane to switch individual pixels on and off. Coincidentally, active-matrix displays consume significantly less power than their passive-matrix OLED (PMOLED) counterparts, which makes them particularly well-suited for mobile devices. These displays are typically manufactured by printing electroluminescent materials onto a substrate, and that relatively simplistic process suggests that OLEDs will ultimately become cheaper and easier to manufacture than LCDs. Shockingly, the most challenging step is the creation of the substrate itself, which remains a difficult and expensive endeavor. Currently, the limited supply and high demand of AMOLED screens has restricted their availability, and you"re most likely to find them in high-end smartphones.

While all screens suffer from reduced visibility in direct sunlight, the original AMOLED screens were particularly vulnerable to this drawback. To resolve this, Samsung introduced the Super AMOLED display. With this new technology, the touch sensors were integrated into the screen itself. Naturally, this allowed for a thinner display, but this also improved brightness by eliminating the extra layer. Additionally, the screen"s reflection of ambient light and power consumption were significantly reduced. While colors were now bright and vibrant -- and acceptable in direct sunlight -- the displays still couldn"t match the crispness and clarity of LCD screens, particularly with respect to text. Samsung"s PenTile matrix is to blame, which is a hallmark of its AMOLED and Super AMOLED displays. Here, a single pixel is composed of two sub-pixels, either red and green, or blue and green, and the green sub-pixel is significantly more narrow than the other two. While the scheme works fine for images because the human eye is more sensitive to green, it makes the anti-aliasing of text rather imprecise, and the end result is a bit blurry. Like Super AMOLED, Nokia"s ClearBlack display was created to make the AMOLED screen more visible in direct sunlight. This was accomplished by adding a polarized filter to the display, which allows the viewer to see through the screen"s reflection and view the images as they would appear under more ideal conditions.

In its most recent incarnation, the Super AMOLED Plus features a traditional three sub-pixels of equal proportion within one pixel, along with an increased sub-pixel count and density. Both of these measures create a display that"s much more crisp, especially when it comes to text. Further, the tighter spacing between pixels results in better visibility under direct sunlight. The new Super AMOLED Plus screens are also thinner and brighter to boot.

By now, you"ve probably had the chance of viewing a glasses-free 3D screen for yourself. Whether you think the feature is cool, gimmicky or annoying -- or, all of the above -- it"s clear that autostereoscopic displays are moving into the mainstream. If you"ve ever wondered what makes this marvel possible, today is your lucky day. First, let"s start with stereoscopic imaging itself. This merely refers to a technique that creates an illusion of depth by presenting two offset images separately to the right and left eye of the viewer. Traditionally, glasses were required to complete the effect, but a creation known as the parallax barrier has done away with that. Essentially, it"s a layer of material placed atop the screen with precision slits that allows each eye to view a different set of pixels. As you"ve likely observed (or at least read about), you"re required to position the display at a very specific angle to properly view the 3D effect. Also, because the parallax barrier effectively blocks half the light emanating from the screen, the backlight is forced to shine twice as bright -- which really kills the battery. Granted, it"s an infant as technology goes, but researchers are already making refinements. For example, MIT"s HR3D is a promising project that touts better viewing angles, brightness and battery life -- largely by increasing the number and varying the orientation of the slits.

So far, we"ve discussed the underlying technologies of mobile displays, but these options are merely one factor for consideration as you select your next phone. Screen resolution is another very important topic, as it determines the amount of content that can be displayed at any given time. Many of you are likely aware of this, but the physical size of a screen conveys nothing about the content that it can display. For example, a 4.5-inch screen with an 800 x 480 resolution actually displays less information than a 3.5-inch screen with a 960 x 640 resolution. These numbers are simply measures of the physical number of pixels positioned vertically and horizontally across the screen. Taking it a step further, the 800 x 480 screen is capable of displaying 384,000 pixels worth of information, while the 960 x 640 screen is capable of displaying 614,400 pixels worth of information. Put simply, a low-res screen simply can"t convey the same amount of content as a high-res alternative.

The most common displays today are generally based around the Wide VGA (WVGA, 800 x 480) standard, and lower-res options include Half VGA (HVGA, 480 x 320) and Quarter VGA (QVGA, 320 x 240). Another variation of this is Full Wide VGA (FWVGA, 854 x 480), which is common to Motorola"s Droid family. Quarter HD (qHD) is an up-and-comer in the mobile industry, with a 960 x 540 resolution, which is one quarter the pixel count of full 1080 HD (1920 x 1080). Lest we not forget Apple"s Retina Display, which measures 960 x 640. As you"ve seen in our reviews, we"re particularly fond of high-res screens, and HVGA really is the minimum that you should accept when purchasing a new phone.

Another component of screen resolution is pixel density, which is the total number of pixels within a physical constraint. It"s calculated in pixels per inch (ppi), which is fundamentally a measure of how tightly pixels are squeezed together. This element was somewhat of an afterthought until Apple introduced the Retina Display, but it has important ramifications for the overall crispness of text and images. While the iPhone 3GS came with a 3.5-inch screen with an HVGA resolution, the iPhone 4 kept this same screen size yet boosted its resolution to 960 x 640. The result was a massive increase in pixel density, which grew from 163ppi in the iPhone 3GS to a staggering 326ppi with the iPhone 4. Of course, these numbers are merely academic until you examine the impact that a high pixel density has upon the overall legibility of small text and clarity of images. As you"d expect, other manufacturers aren"t letting Apple have all the fun in the pixel density war, and we"re seeing particularly exciting developments from Toshiba and Samsung (more on that a bit later).

If you"re interested in calculating pixel density for yourself, you"ll need to start by knowing the display size and screen resolution. From there, you"ll need to determine the diagonal resolution of the screen with a little help from our friend Pythagoras (famous for the Pythagorean theorem). For our purposes, his equation is best expressed as follows:

Now, take the diagonal resolution (in our case, 933 pixels), and divide that by the display size (4-inches). If you"ve done the math properly, you"ll see this particular display has a pixel density of 233ppi. While most smartphones on the market today feature perfectly acceptable pixel densities, this little tidbit could come in handy if you"re looking for the clearest possible display.

Now that we"ve examined display technologies and screen resolution, let"s take a brief moment to discuss touch screens, which are crucial elements for modern smartphones. The dominant touchscreen technology is known as capacitive touch, which receives feedback from your body"s ability to conduct electricity. When you place a finger on the display, the screen"s electrostatic field becomes distorted, and the change in capacitance is registered by the underlying sensor. From there, software is used to react to your input. The beautiful part about a capacitive touchscreen is its ability to register multiple points of contact at the same time, which enables multi-touch functionality such as pinch-to-zoom.

Another type of touchscreen on the market today is known as the resistive touchscreen. It"s generally less expensive to produce and responds to physical force. While there are multiple elements to a resistive screen, the most important are two electrically conductive layers that are separated by a narrow space. When you press on the display, the two layers come into contact with one another, which registers as a change in current. Unfortunately, these added layers reduce the overall brightness of the display and increase the amount of glare reflected from the screen. You"ll generally find resistive touch screens in lower-end smartphones because they don"t support multi-touch, although a few individuals appreciate its ability to receive input from a stylus, gloved fingers or fingernails.

Hopefully we"ve given you a solid overview of the current state of mobile displays, but as you"d expect in an industry that"s rapidly evolving, there"s plenty of exciting possibilities on the horizon. Here"s a few gems that are sure to whet your palate for the future.

Ortustech (a joint-venture between Casio Computer and Toppan Printing) has developed a 4.8-inch screen with full 1080p resolution and a stunning pixel density of 458ppi. While a touchscreen isn"t in the mix, manufacturers understand the appeal of full HD, and we"re seeing the industry continually advancing upon this holy grail. Likewise, Hitachi has announced a 4.5-inch IPS display with a 1280 x 720 resolution that supports glasses-free 3D to boot. Toshiba has introduced a 4-inch contender, also at 720p, with a stunning 367ppi resolution. Samsung isn"t resting on its laurels, either, and is working on mobile displays that will push between 300 and 400ppi -- by 2015, anyway. While this announcement was specifically for tablets, we know Sammy"s smartphones are bound to benefit.

Manufacturers are finding a new take on our mobile phones being a window to the world, as transparent displays are now coming into the fray. TDK began production of a see-through OLED earlier this year, and while we"d be shocked to see this novelty crop up in smartphones, it"s sure to give some added intrigue to the feature phone segment. Whether it can actually save SMS fiends from walking into oncoming traffic is still debatable.

If you find your current smartphone far too rigid, 2012 could be quite a milestone, as Samsung is readying flexible AMOLED displays for production next year. While we plan to see smartphones with large screens that can be folded into a smaller form -- a definite improvement over current hinge-based designs -- we"d love to see an outlandish solution that fully incorporates the flexible spirit.

Take one quick look at your smartphone"s power consumption and it"s painfully obvious that the display is the primary culprit. With projects such as Mirasol and E Ink Triton leading the way, we"re hoping to see a day when color "electronic ink" becomes useful for smartphones. In addition to requiring only a fraction of the power of its illuminated brethren, these displays offer full visibility in direct sunlight. Of course, the need for a light source is a given, and current refresh rates would make for lousy gaming and video playback, but these alternatives are getting better with each new announcement. For those needing maximum battery life at all costs, these displays can"t come soon enough.

Panox Display provides free connectors for clients who purchase more than five products from us. Our product range includes connectors from Molex, Kyocera, AXE, AXG, JAE, Hiros, and more.

Panox Display provides a customized cover glass/touch panel service. We supply cover glass from Gorilla, AGC, and Panda, which all have excellent optical performance. We also supply driver ICs from Goodix and Focaltech.

If your applications are directly connected to a PC, a cellphone, or Raspberry Pi, and you have enough space to insert a board to input video, Panox Display can provide customized Controller/Driver boards with input connections for VGA, HDMI, DVI, DP, Type-C video input, MIPI, RGB, LVDS, and eDP.

The functions of our boards include, but are not limited to, adjustment of brightness, sound output, touch interface, extra data transmission, and gyroscope.

The "p-display" nomenclature used in this article refers to the number of pixels displayed across the width of a given phone"s screen. Earlier phones with lower than 720p (lower than HD ready resolution) are not included in this listing. The lists below are dynamic lists and may be sorted into alphabetical order by clicking on the "sort icons" at the top of the first column.

The combination (which occurs by multiplication) of both the pixel aspect ratio and storage aspect ratio giving the aspect ratio as experienced by the viewer.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

LCD panels" resolutions are often quoted in terms of raw subpixels, misnamed "pixels" in manufacturer"s specifications. Each real pixel includes one subpixel for each of three colors, so calling subpixels "pixels" inflates the claimed resolution by a factor of three. This bit of marketing obfuscation is calculated as horizontal resolution × vertical resolution × 3. For example: 640 × 480 VGA is 921,600 subpixels, or 307,200 pixels, 800 × 600 SVGA is 1,440,000 subpixels, or 480,000 pixels, and 1024 × 768 XGA is 2,359,296 subpixels, but only 786,432 full-color pixels.

Confused about LED vs. LCD vs. TFT? Here"s everything you need to know. Creating or upgrading a device display or screen can involve a lot of different things, but it often comes down to one major question - what kind of display should you get?

So, there are 3 common displays LED, LCD and TFT available in the market. All terms refer to the flat-panel display, or screen, of a computer monitor or television set. In this article, we are going to differentiate between them. It will help you to choose a better one.

LCD stands for liquid crystal display. Works by adjusting the amount of light blocked. Usually has a backlight but might not (clocks, calculators, Nintendo Gameboy). The green-black ones can be very cheap and are a mature technology. Response time can be slow. An LCD display uses the light balancing qualities of crystals. Today LCDs are used in a great number of products and applications. Your TV, computer screen, calculator, cell phone and the dreaded alarm clock are all made of an LCD flat panel. Color LCDs produce the color based on two techniques: Passive matrix and active matrix. Passive matrix is the cheapest technology of the two. The other technology is called an active matrix or TFT. Active matrix displays produce really sharp and clear images.

This is a type of LCD with a thin film transistor attached to each pixel. All computer LCD screens are TFT since the early 2000s; older ones had slower response times and poorer color. Cost is now very good; power consumption is fairly good but dominated by the backlight. Has to be manufactured out of glass. The TFT layer is embedded in the screen itself, it reduces crosstalk between pixels. Crosstalk happens when a signal sends to a pixel also affects the pixel next to it. This makes the TFT technology the technology offering the best resolution and image quality. It also makes it a bit more expensive. Today TFTs have become the standard when producing LCD screens.

LED stands for a light emitting diode. As the name suggests, emits light rather than blocking it like LCD. Used for red/green/blue/white indicator lights everywhere. Some manufacturers advertise "LED" displays that are TFT screens with a white LED backlight, which is just confusing. Ones that are real LED screens are usually OLED.

Some devices actually have backlights made from Red, Green and Blue LEDs, normally referred to as RGB LED, which tend to have better color reproduction than any other display.

LED screen is just like saying that it is a plastic screen. You still have the WHOLE screen illuminated all the time and LED is "good" only for being more eco-friendly and probably more bright at max setting if you ever need this.

An LCD panel is, in fact, 2 layers of glass with some volume of Liquid Crystal in between. These two form the panel itself. The 2 layers are usually called Color Filter Glass (above) and TFT glass (below).

LCDs can’t completely prevent light from passing through, though, even during dark scenes, so dimming the light source itself aids in creating deeper blacks and more impressive contrast in the picture.

A standard TFT has a whole "lamp" behind it, illuminating the whole screen all the time. This way, you cannot have a true black, as it is still illuminated and stay grayish.

TFTs are a type of active matrix display that controls individual pixel updates several times per second on the screen to update the image relative to the content source.

TFT displays use more electricity than regular LCD screens, so they not only cost more in the first place, but they are also more expensive to operate.

LCDs use fluorescent lights while LEDs use those light emitting diodes. The fluorescent lights in an LCD are always behind the screen. On an LED, the light emitting diodes can be placed either behind the screen or around its edges.

TFT stands for thin-film transistor and is used with LCD to improve image quality over older digital display technologies. Each pixel on a TFT LCD has its own transistor on the glass itself, which offers greater control over the images and colors that it renders.

TFT is also an abbreviation for other technical terms including time from transmission, text fix test, Trinitron flat tube, and trivial file transfer protocol.

Since the transistors in a TFT LCD screen are so small, the technology offers the added benefit of requiring less power. However, while TFT LCDs can deliver sharp images, they also tend to offer relatively poor viewing angles. The result is that TFT LCDs look best when viewed head-on, but viewing images from the side is often difficult.

TFT LCDs are found on low-end smartphones as well as basic cell phones. The technology is also used on TVs, handheld video game systems, computer monitors, and GPS navigation systems.

All the pixels on a TFT screen are configured in a row-and-column format, and each pixel is attached to an amorphous silicon transistor that rests directly on the glass panel. This allows each pixel to be given a charge and for the charge to be kept even when the screen is refreshed to produce a new image.

With this type of setup, the state of a particular pixel is being actively maintained even while other pixels are being used. This is why TFT LCDs are considered active matrix displays (as opposed to a passive matrix displays).

Lots of smartphone manufacturers use IPS-LCD (Super LCD), which provides wider viewing angles and richer colors, but newer phones feature displays that utilize OLED or Super-AMOLED technology. For example, Samsung"s flagship smartphones boast OLED panels, while most of Apple"s iPhones and iPads come equipped with an IPS-LCD. Super LCD and Super-AMOLED have their own pros and cons, but they both far exceed the capabilities of TFT LCD technology.

OLED displays are commonplace on all high-end phones, tablets, smartwatches, televisions, and even many of the many budget phones. However, there isn"t one type of OLED technology. Depending on your device, you may have an OLED, AMOLED, or POLED display.

OLED promises inky blacks, high contrast, low response times, and incredible brightness. There are a few downsides (primarily the burn-in phenomenon), but overall it"s the best screen technology you"ll find. We explain the background behind the acronyms, the difference between POLED and AMOLED, and which is better, helping you choose the right phone.

Before we get into the differences between the types of OLED screens, let"s look at the similarities. Regardless of your OLED device, whether a laptop or a smartphone, there are some standard fundamentals.

Every OLED screen comprises millions of diodes, hence the name organic light-emitting diode. Viewed under a microscope, each screen consists of a series of red, green, and blue diodes that can be individually turned on and off. Behind this, the light-emitting pixels of an OLED display emit blue and yellow light. The yellow and blue light combine to form white light, passing through the red, green, and blue subpixels to produce a single pixel. Because each pixel handles its light and color, OLED displays do not need a separate backlight.

As an OLED screen doesn"t need a backlight, black is produced by turning off the pixels, resulting in deep, consistent blacks. This allows manufacturers to implement things like an always-on display without quickly burning through battery life.

Another critical advantage of OLED tech is high contrast ratios. Technically, OLED displays offer "infinite contrast," or 1,000,000:1 contrast ratios. This is because OLED displays reproduce black by turning off pixels entirely, and contrast is measured by comparing the brightest part of the screen to the darkest part. Improved contrast makes on-screen content more vivid and makes bright highlights look more impressive. This also means that OLED screens can reach higher brightness than the best IPS LCD screens.

OLED displays can display more colors with greater color accuracy than their LCD peers. This is great for photographers and videographers using their phones to preview, edit, and create content.

OLED displays have near-instantaneous pixel response times. Older LCD screens often have lower response times because to change from one color to another, they must physically change the orientation of a liquid crystal, which takes time. An OLED display turns a subpixel on or off with an electrical charge, giving them a faster pixel response time.

The omission of a separate backlight and the use of fewer components means OLED displays can be thinner than LCDs, making them more versatile in their applications. This means they are more fragile and prone to damage in high-impact or high-stress situations. Engineers combat this by using technologies like Gorilla Glass and robust metal frames. Mitigation strategies like these raise the cost of OLED screens.

OLED displays can also be transparent, depending on the materials used. Transparent displays are helpful for in-display fingerprint readers and under-display cameras, which allow manufacturers to design smartphones with fewer and smaller bezels, notches, and display cutouts. When notches and cutouts are necessary, OLED displays have more even brightness around those cutouts and notches compared with LCDs, where the backlight has to make it around the cutout, and things get a little messy.

Of particular import to smartphones, OLED displays often consume less power, especially when displaying dark images or UI elements, thanks to the pixel-level regulation of brightness. However, at max brightness, an OLED screen usually uses more power than an equivalent LCD.

As with any new technology, OLED tech is not without its flaws.OLED displays are prone to degradation from age and UV exposure, resulting from the organic nature of the molecules that make up the diodes. The organic nature of OLED displays also leads to a phenomenon called screen burn-in, where static UI elements like menus, navigation bars, and status bars (elements that are on-screen for long periods) leave a permanent ghost image, even when they are not displayed. However, burn-in has been somewhat mitigated by pixel shifting and technological advancements in recent years.

Early OLED screens placed all the organic materials on a glass substrate. However, glass is rigid, so a flexible plastic substrate is needed to create foldable display screens, leading to the creation of POLED screens.

POLED (polymer organic light-emitting di