tft lcd ad board gt factory

1024 x 6007154.21 x 85.92-20°C to +70°C2335V / 930mADigital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB)850N/AN/A

800 x 4805108.00 x 64.80-20°C to +70°C1055V / 530 mADigital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB)810N/A

800 x 4807154.08 x 85.92-20°C to +70°C2555V / 640 mADigital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB)850N/A

1280 x 80010.1216.96 x 135.60-20°C to +60°C5505V / 1.5ADigital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB)850N/AN/A

DVI (Digital Visual Interface) is transmitted to the GT-VP through an HDMI type-A connector. This connector accepts unencrypted digital video signal and outputs raw 24-bit pixel data to the display (HDCP not supported).

Touch data can also be obtained through I2C and UART using the simple commands seen on the left. So, if USB communication cannot be achieved, any micro-controller with UART or I2C can read touch data and change the module’s settings. For more information, check the module’s respective full specification.

We are very aware of how important long-term support is for our customers and continue to strive to maintain strong supply chains with our GT products. Please refer to the Long Term Support Policy for more information.

This application note describes GT-VP module’s touch panel features, USB communication setting up guide, touch sensitivity reference, and more useful information. To install the GT-VP module into your application smoothly, please refer this document first.

Two metallized layers(x-y) are overlaid onto an LCD screen. These thin-film metallic panels have a lower impedance than typical ITO** touch panels. This allows for a higher S/N ratio, wider touch sense margin, and better overall sensitivity.

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

GT-CP has four touch channels that can use three different touch detection modes. Other than the general X-Y coordinate method, sections of the touch screen can be treated as individual switches.

The GU-TFT comes standard with both bitmap and outline fonts, along with font tables that include the English, Japanese, Chinese, and Korean languages. You can also register your own font.

We are very aware of how important long-term support is for our customers and continue to strive to maintain strong supply chains with our GT products. Please refer to the Long Term Support Policy for more information.

Quickly begin programming your own GUTFT application using an MSP-EXP430F5520LP or STM32f4Discovery controller with our code library. This library is written in C for the IAR Embedded Workbench.

This collection of instruction documents are intended to guide the user through their first steps of using a GT-CP module. Currently, two “how to” guides are available: Connect to PC and Connect to Microcontroller.

We offer “GTOMP” which is the Windows® based development tool to support the creation of Graphical User Interface (GUI) prototypes, managing the image files on the memory, adjusting touch sensitivity, and more.

We offer “MSousi” Programming Editor and Complier for the Noritake PMacro language which can make a standalone application or support your host board.

This document describes the detail of the GT-CP module including principal of the FLETAS® touch screen, case study of sensitivity adjustment, configuration of the command-set, interface example, font selection, programing example and more usable information to evaluate the module.

We support the GT-CP memory duplication process for your final projects created with our GTOMP tool or other software and copy them to a new GT-CP module.

Two metallized layers(x-y) are overlaid onto an LCD screen. These thin-film metallic panels have a lower impedance than typical ITO** touch panels. This allows for a higher S/N ratio, wider touch sense margin, and better overall sensitivity.

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

Vitek is a manufacturer of AD Board, LCD AD Board, LCD Controller Board, TFT Controller Board, TFT LCD Controller Board. If you are interested in our AD Boards, please contact us online.

5.6 inch color TFT-LCD module display, 640x480 dots, video & VGA driver board, can be used in any embedded systems, industrial device, security and hand-held equipment which require display in high quality and colorful video.

5.6 inch color TFT-LCD module display, 640x480 dots, video & VGA driver board, can be used in any embedded systems, industrial device, security and hand-held equipment which require display in high quality and colorful video.

{"specs":[],"skus":[{"id":4701,"useViewType":false,"productId":279,"templateId":1,"code":"","name":"5.6 inch VGA Video signal input AD board TFT display, GDN-D567AT-GTI056TN52","stock":0,"price":0.00,"retailPrice":0.00,"weight":0.00,"status":"1","isDefault":"1","createDate":"2022-03-08 11:36:35","updateDate":"2022-03-08 11:36:35","productSkuSpecs":[],"moq":1,"skuId":0,"chargedWeight":0.00}],"specConfs":[]}

LCD Controller Board is the display driver unit for a monitor that converts real world analog visual signals into digital form which is an essential component that gives the monitor its fundamental displaying capability.

Our LCD Controller Board is designed with wide range of application in mind. It provides state of the art display functionality that can be used as a standalone display driver module to support combination of customers specified input (i.e. HDMI, VGA, DVI, and Display Ports...) and output (i.e. EDP, LVDS, V-By-One) to meet developer’s specific requirement whether it be industrial display, measuring equipment, POS machine, LCD monitor, Digital Signage, and Kiosk.

£1,000 towards your PCP Finance Deposit on all-new Niro Hybrid and £500 towards your PCP Finance Deposit on all-new Niro Plug-In Hybrid only. PCP offers only available on purchase in the United Kingdom between 15.12.2022 and 03.04.2023. Retail Sales only. Further charges may be made subject to the condition or mileage of the vehicle. Kia reserves the right to amend or withdraw offers at any time without prior notice. Finance T&Cs apply. Subject to status. 18s or over. Guarantee may be required. Kia Finance RH2 9AQ. 7 year / 100,000 mile manufacturer’s warranty. 7 year / 100,000 mile manufacturer’s warranty. For full terms and exclusions click here.

Kia UK Limited is authorised and regulated by the Financial Conduct Authority under firm reference number 731457 for credit broking and is a credit broker and not a lender. Kia UK Limited introduces customers to its appointed dealers who act as credit brokers in their own right and who may introduce customers to Hyundai Capital UK Limited, trading as Kia Finance, which is authorised and regulated by the Financial Conduct Authority under firm reference number 581186 as a lender. Our appointed dealers will typically receive a fixed fee from Kia Finance for this introduction. However, the amount of commission received by a dealer does not impact the amount paid by a customer under the credit agreement. Kia UK Ltd is registered in England & Wales No: 4415807. Registered Office: Walton Green, Walton-On-Thames, Surrey, KT12 1FJ.

The services are available free of charge for a period of seven years commencing on the day the vehicle is sold to the first owner of the vehicle, i.e. the point in time the initial purchase agreement becomes effective, and may be subject to change during that period. Details of operation and terms of use can be obtained on your vehicle’s head unit. Available On-Board Services might differ depending on your country. Smartphone with data plan required to activate Kia Connect Live Services services in countries and models without embedded telematics.

Information and control service for your Kia from your smartphone; the Services are available free of charge for a period of seven years commencing on the day the vehicle is sold to the first owner of the vehicle, i.e. the point in time the initial purchase agreement becomes effective, and may be subject to change during that period. Details of operation and terms of use can be obtained on your Kia Connect App. Smartphone with iOS or Android operating system and mobile phone contract with data option necessary incurring additional cost.

The Kia Niro is compatible with Apple CarPlay™ and Android Auto™. Android Auto™ is designed to work with Android phones running 5.0 (Lollipop) or higher. Apple CarPlay™ is available for iPhone 5 or newer models. Both systems feature voice control and allow the driver to keep their hands on the wheel and eyes on the road ahead at all times. Apple CarPlay™ is a trademark of Apple Inc. Android Auto™ and other marks are trademarks of Google Inc.

Forward Collision-Avoidance Assist (FCA) is an assistance system and does not relieve the driver from their responsibility to safely operate the vehicle at any time. The driver still has to adapt their driving behaviour to their personal driving capabilities, to the legal requirements and to the overall road and traffic conditions. FCA is not designed to drive the vehicle autonomously. For further information, please refer to the owner’s manual.

The Services are provided free of charge for a period of 7 years commencing on the day the vehicle is sold to the first owner of the vehicle, i.e. the point in time the initial purchase agreement becomes effective. We reserve the right to propose additional services in the future subject to separate terms of use. For the full list of services available, refer to https://connect.kia.com/uk/kia-connect-legal-document/

For new vehicles sold from May 2021, Kia offers, per vehicle, two free-of-charge updates of the maps in the vehicle’s navigation system and of the Head Unit software using the so-called “over-the-air” method (“OTA Updates”). Once the two free-of-charge OTA Updates have been consumed, you will be able to get updates of the maps in the vehicle’s navigation system and of the Head Unit software only (i) by accessing the following web page https://update.kia.com/EU/E1/Main or (ii) at a dealership.

Taimates Electronics is a manufacturer of AD Boards, LCD AD Boards, LCD Controller Board, TFT Controller Board, TFT Conversion Board, and TFT driving board. Our service can help to integrate the controller board onto our TFT LCD modules with other options with touch panel as a whole-package module solution. If you’re interested in our control board product, please feel free to contact us via:

The Controller/Driver Board is used to OLED/LCD display and work as the main display board. It ensures a panel display works properly with input connections such as VGA, HDMI, DVI, or DP (Display Port).

Panox Display supplies Controller/Driver boards that work with all of the well-known OLED/LCD panel brands. We provide an Controller/Driver board with cable sets based on the demands of your panel display, with custom firmware to ensure your panel display works as it should do.

The functions of our boards include, but are not limited to, adjustment of brightness, sound output, touch interface, extra data transmission, and gyroscope.

This new smart control tablet is built by Chinasoft International and it is powered by Rockchip RK3568 quad core A55 platform. This Chinasoft home control tablet has pre installed KaihongOS operating system, which is based on open-source HarmonyOS, OpenHarmony.

Previously, Chinasoft International launched a 15 inch industrial central control system tablet. It is equipped with RK3568 chipset and has a massive 15-inch TFT LCD liquid crystal touch screen.

Chinasoft International Limited (hereinafter referred to as Chinasoft International) is one of the industry’s leading global software and information technology services companies and a listed company on the main board of Hong Kong.