what do you use to clean an lcd screen quotation

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Don"t make the mistake of thinking that LCD screens work like your nifty new iPad. In general, touching should be off limits because pressing too hard on the screen can actually break or crack pixels. So the first rule to cleaning an LCD screen is don"t do it unless you have to (i.e. unless it"s actually dirty).

Many retailers offer special cleaning solutions for LCD screens, but the truth is that most of these are made up primarily of water. So, if you don"t want to take the time to go buy a cleaner or you want to save the money (maybe to put toward that "What Not to Wear" dress), you can just make your own LCD cleaner by mixing water with some vinegar or isopropyl alcohol -- the solution should be no more than 50/50.

You could even start with plain water and see if you need the vinegar or alcohol, which will come in handy when you"re trying to wipe away greasy fingerprints. Some people recommend only using distilled water, but regular water works fine, according to Dave Chipman from Sharp.

Unless you want to end up with a melted, discolored, hazy or scratched LCD screen, steer clear of all spray cleaners. In particular, don"t use any solvent cleaners that include acetone, ethyl alcohol, ethyl acid, ammonia or methyl chloride. You also want to avoid using any materials that could potentially scratch the screen"s delicate surface. Opt for a soft, clean, cotton cloth instead of wood-based products like paper towels and tissues. Chipman suggests using a microfiber cloth for best results.

If you"re lucky enough to have a service come in and do your cleaning for you, make sure they don"t inadvertently ruin your television or monitor by trying to clean it with something like glass cleaner. You should either take the time to explain -- and maybe even demonstrate -- how you want your LCD screen cleaned or just ask your cleaner to leave this particular job for you.

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

Remember when your computer LCD display had that brand-new, fresh out-of-the-box shine? If it"s looking a little dull lately, it might be time to give it a good cleaning. Here"s how:

Step 2:Gently wipe the dust from the surface of the display using a dry, lint-free cloth, like a microfiber cloth. Remove any tags that may be on the cloth to avoid scratching the display with the tags.

If you prefer, you can use a cleanser made specifically for cleaning LCD displays, but do not spray it directly onto the display. Spray a small amount of the cleaner onto a microfiber cloth first, to avoid getting any cleaning solution inside the display.

Even if you don"t have snot-nosed kids or wet-nosed pets, your computer monitor or HDTV panel will eventually accumulate a collection of annoying smudges and stains. My household happens to contain both of the aforementioned creatures and, thus, I"ve developed a method for wiping down the HDTV in the living room and the LCD monitor in my office, as well as the screen of my laptop and iPad.

If you take a quick survey of LCD or HDTV manufacturers about the recommended method for cleaning the surface of your monitor or TV screen, you"ll discover more don"ts than dos, often in conflict with one another.

In the don"t column:Don"t use aerosol sprays, solvents, or abrasives. (This means don"t reach for the Windex under the kitchen sink, as tempting as it may be.)

First, attempt to clean your screen with a dry, lint-free cloth. If you can"t find the cleaning cloth that came with your screen in question, then it"s likely you have one laying around from a laptop, iPad, or iPhone purchase.

After removing any dust from your screen with a dry cloth, dip the other cloth in your dish soap solution, wring it out, and gently wipe your display. Next, rinse out your soapy cloth, wring it out again, and wipe your display to remove any soap residue. Finally, take your dry cloth and wipe the display to remove any streaking.

Editors" note:It"s time for spring cleaning! Week"s two"s theme: physical cleaning.Check backevery day this week to see how best to keep dirt, grime, crumbs, and other annoying bits off your devices. And be sure to return next week for more spring cleaning tips and tricks.

We"ve all had that moment: You"re sitting at your computer or laptop and the light hits your screen in a way to reveal an unsightly accumulation of streaks, fingerprints, and dust.

To help, we round up the most important things to know about cleaning your computer screen, whether it"s a Mac or PC. While it"s a simple process, there are a few important rules to keep in mind to make sure you"re doing it safely.

Computer screens are not all made the same, and thus can"t all be cleaned the same way. You"ll want to be careful no matter your screen type, but it"s helpful to know that displays come in two categories:Glass-coated screens: The screens on newer iMac displays and MacBooks have a glass overlay. Glass displays are a little less delicate than LCD or LED screens, and mild cleaning solutions, like rubbing alcohol, are generally safe to use on them.

LCD or LED screens:Windows computers and most touchscreens and matte displays are typically not coated in glass. Extra care should be taken with these screens so not to damage the pixels that make up the display.

Since there are so many computers, laptops, and monitors out there, each with their own set of variables and specificities, it"s smart to just simply err on the side of caution.

To clean a computer screen, you really just need two things: A microfiber cloth and filtered or distilled water. That"s to say you don"t need a special store-bought cleaning solution.

If you"d like some extra sanitation power, an equal parts mixture of water and vinegar is safe no matter your screen type. If you know that your display is glass-coated, you can also use an equal parts mixture of water and 70% rubbing alcohol.What you needTwo lint-free microfiber cloths

d3sign/Getty ImagesTurn the computer or laptop off.For safety reasons, begin by letting the device cool down completely. Dust, fingerprints, and smudges are also easier to spot on a black screen.

Wipe off dust with a dry cloth. Use a dry, lint-free microfiber cloth to gently wipe away any visible dust and dirt. If necessary, apply gentle pressure to remove surface-level smudges.

If any marks remain, wipe with a lightly moistened cloth.For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.

Buff with a dry cloth and air-dry.If any streaks remain once the screen dries, gently buff them with the dry cloth. Before you turn your computer or laptop back on, allow the screen to dry completely.Note:Apple claims that you can use 70% isopropyl disinfecting wipes to clean any Apple product. Just remember not to get any liquid into the device"s ports or openings — to avoid this, you might want to wring out the wipe to remove any excess liquid before using it.

For the best advice for cleaning your screen, it"s a smart idea to check your owner"s manual, which provides the manufacturer"s specific recommendations. But since screens are especially susceptible to damage, there are a few general guidelines that apply, no matter the type of screen you own.

Turn off your computer before cleaning the screen. This is just safe practice where any amount of liquid is involved, but more specifically, any static on the screen could create a shock and damage the internal components.

Do not use abrasive cleaning solutions. This includes bleach (or any products containing bleach), hydrogen peroxide, or all-purpose spray cleaners. Using an abrasive cleaner can ruin the finish of your screen.

Use filtered or distilled water. Especially in areas with hard water, water containing minerals like calcium and magnesium can damage your screen or leave even more streaks.

Use only soft microfiber cloths.Even a fabric as soft as a cotton shirt has snags and uneven particles that can scratch a computer screen. For this reason, avoid T-shirts, towels, and paper towels. The exception is the Apple Pro Display XDR or iMac, which requires a special polishing cloth.

Never spray cleaning solution directly onto the screen. To avoid any risk of damage from excess moisture, mist the solution directly onto the microfiber cloth instead.

Do not wipe in circles. Wiping in circles can create uneven pressure and ultimately lead to screen damage. It"s also more likely to create streaking. Wipe in tight, Z-shaped motions, or in broad strokes from side to side.

Do not scrub.Apply gentle pressure only. Hard scrubbing can damage the internal components of the screen and could leave scratches or spots of discoloration or dead pixels that won"t go away.Melanie Weir

Melanie Weir is a freelance author for Insider, mainly focusing on the Tech Reference section, but occasionally contributing to Lifestyle and Entertainment topics as well. She is also a freelance writer for ScreenRant, and is the Lead Weekend News Editor at TheThings.com. In her spare time she writes plays for both stage and screen. She can be reached at melanie.weir1008@gmail.com, or through LinkedIn.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Use a non abrasive cleaning solution, diluting isopropyl alcohol (not rubbing alcohol, as it may contain oil) into a solution of 50% alcohol and 50% with distilled water water (or purified/bottled water). You could also buy a cleaning solution that does not contain bleach, ammonia, or vinegar.

Before you start, power-off and unplug your monitor. Spray the cleaning solution on a soft cloth (for example an old T-shirt), lint-free microfiber cloth, or some other very soft cloth. A large cloth is best, since it will help reducing the risk of leaving streaks across the display from finger pressure.

Starting from the top, wipe the screen in one direction until you have cleaned the entire screen. Apply light, but distributed pressure. Repeat if necessary. Let it air dry.

Let"s be real: Your TV screen is probably dirty. Sometimes, the dirtiness of a TV screen can go unnoticed, particularly if you spend a good amount of time watching bright, colorful content that minimizes the appearance of smudges and grime.

Like sunglasses, mirrors, and windows, TVs are best left free of smudge, spots, and fingerprints. Unfortunately, there"s a ton of misinformation out there about the best (and safest) ways to wipe away the blemishes on a TV. After all, these aren"t just any old surfaces—they"re expensive and often delicate pieces of technology.

Here"s the good news: Once you understand the basics, freeing your spot-covered TV of your kid"s oily palm prints couldn"t be simpler. Just remember: a clean screen means a clean scene.

Window cleaners contain harsh chemicals (like alcohol, ammonia, and lauramine oxide) that can do damage to LCD and OLED panels. One reason people assume that surface cleaners are still copacetic for TVs is because old-school CRT TVs could stand up against Windex, thanks in part to their glass screens. These days? The less liquid you use, the better.

Believe it or not, even the densest of fingerprints can be wiped away without the use of any moisture. It is important, however, to use the right type of cloth or towel when cleaning, otherwise you run the risk of scratching the panel.

Always use a microfiber cloth or towel—like the ones that come with a new pair of glasses—to clean your TV screen. Avoid using standard tissues or paper towels. Go to work on the problem areas with gentle, circular motions. Avoid applying too much pressure to the panel. If you"re dealing with some stubborn, oily stains that just won"t cooperate, resist the urge to exert more force. Instead, try moisturizing the cloth with a small amount of warm water.

Generally speaking, dedicated screen-cleaning solutions are OK for LCD/LED and OLED TVs, but if you decide to use screen cleaner, make sure the formula does not include alcohol or ammonia.

If you decide to use water or some sort of cleaner, do not spray the screen directly. Instead, lightly moisten your microfiber cloth before wiping the your TV screen.

The product experts at Reviewed have all your shopping needs covered. Follow Reviewed on Facebook, Twitter, Instagram, TikTok, or Flipboard for the latest deals, product reviews, and more.

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

If you take a closer look at your flat screen TV, you may be surprised by all the dust, dirt, and fingerprints across the screen and on the housing. When the lights are down and you’re watching your favorite movies, it may not be so noticeable, but the truth is it affects your viewing pleasure—and your TV’s performance and life span.

Your television is a commonly missed cleaning spot, but it’s a project that should be on your monthly cleaning checklist. Let’s discuss how to clean a TV screen, the housing, and the connections for audio/video equipment.

Most of our “how-to” cleaning posts start with a list of supplies and information you need to know before you get down to business. But learning how to clean a flat screen TV is a bit different from most cleaning chores. That’s because cleaning a LCD, LED, or other flat screen TV incorrectly could shorten its lifespan, affect performance, or even cause damage.

Instead of starting with what to do, we’re going to begin our guide for how to clean a TV screen with what not to do when learning how to clean a flat screen TV.

If you don’t take certain precautions when you clean that beautiful 65” LED screen, you might be better off leaving it dirty. Here’s a list of “don’ts” that will help you learn how to clean a flat screen TV the right way:

Don’t clean a flat screen when the TV is still warm. If you try to clean a warm screen with a screen cleaner, it could make removing dirt and grime more difficult and even cause damage.

Don’t use window or glass cleaner or any cleaner containing alcohol, benzene, ammonia, or acetone. Harsh chemicals can degrade anti-reflective and protective coatings, cause clouding, or even ruin the screen itself.

Don’t use cleaning pads, regular cleaning cloths, or paper towels, because the mildest abrasion can scratch coatings and screens. Even a paper towel can be fairly abrasive and cause buffed areas and fine scratches on flat screen TVs./li>

Don’t spray water or other liquids directly on your TV. Flat screen TV screens are made from layers of plastic, glass, adhesives, coatings, and other delicate materials. When liquid touches the edges of the screen, the moisture can wick into the layers and ruin the TV.

Don’t rub the flat screen too hard or press into the screen. Flat TV screens aren’t too fragile, but they can be damaged if you press too hard when you’re cleaning.

Whether you use a commercial TV screen cleaner or mix your own, keep in mind that chemicals and moisture are hazardous to your TV. Read your TV model’s instruction manual for cleaning guidelines. If you’ve misplaced your manual, you can locate it online. Look on the back of your set to determine its model number and Google the manual for that model.

The best way to clean a TV screen is to start with a dry cleaning method. Don’t forget, keep all hands off the TV screen as the less you touch your TV screen, the better. Follow the steps below and you should be able to get rid of most dirt and grime without worrying about damage to your flat screen.

For safety and a better view of those fingerprints and dirt, don’t forget to turn off your TV before you clean it. Unplug the set for good measure. Cleaning a flat screen while it’s warm could cause streaking, residue buildup, and other problems. If you have a plasma TV, you may have to wait up to 20 minutes for it to cool down completely. When you cut the power, you also reduce the risk of any moisture coming in contact with your TV’s wiring and causing an electrical issue.

Before you clean your flat screen TV, it’s essential to remove as much dust and dirt as possible without touching the screen. That’s because even the finest dust can scratch your TV’s coatings and screen if you move it around with your cleaning cloth. Use a can of compressed air to remove as much dirt from the screen as possible. Hold the can upright, about a foot from the screen, and spray away. The blasts of air will remove electrostatic-charged dust particles and are particularly good at cleaning out the screen corners.

Lightly wipe the flat screen with a clean, dry microfiber cloth. If possible, get your hands on one of those smooth microfiber cloths used for glass and lens cleaning (like the ones that come with new eyeglasses). A gentle wiping with a microfiber cloth should get rid of most fingerprints, smudges, and grime.

Most TV screens are somewhat flexible, so it’s difficult to know how much pressure you’re using on a particular spot. Clean with a light touch using a broad wiping motion either left and right or up and down. If you make circular buffing motions, you risk creating buff marks on the surface.

If cleaning your TV with a dry microfiber cloth still leaves smudges, dirt, and fingerprints, you’re going to need more cleaning muscle. Keep reading to find out what to clean a TV screen with to get rid of tough dust and dirt.

Remember: Moisture can be deadly for flat screen TVs, so only use as much TV screen cleaner as necessary. Here’s a screen cleaner you can make at home and the tools you need for a deeper flat screen TV cleaning:

For tough grime and fingerprints on a flat screen TV, one part distilled water and one part white distilled vinegar is a safe and effective cleaning solution. Barely dampen half of a clean microfiber cloth with your screen cleaner and begin lightly wiping back and forth with broad strokes.

While it’s tempting to rub oily or grimy spots directly, remember that even light rubbing in one spot can cause buff marks. Use the dry portion of your microfiber cloth to remove excess liquid and to dry the TV screen. Let the TV dry completely before you plug it back in and turn it on.

Now that you know how to clean a TV screen, let’s move on to the rest of the package. Wipe down the housing around the screen and the base of the TV with a clean, microfiber cloth dampened with distilled water. Now, turn your TV enough to get access to the back and make sure the TV is stable before you continue cleaning.

Next up, we’re going to clean the air vents and ports. Cleaning these areas is important not only for the sake of cleanliness but also to keep your TV working properly.

The slits or holes on the back of your TV are air vents that keep it from overheating. TV vent cleaning is especially important for plasma TVs that are prone to getting very warm during operation. Your aim is to remove any buildup in your TV’s vents without pushing dirt or dust into its interior. Instead of reaching for a duster or compressed air, use your vacuum’s brush attachment or other extension and vacuum the vents clean.

Ports on a flat screen TV can be on the back, sides, or the top or bottom of the TV casing. We use these ports for HDMI cables, streaming sticks, gaming systems, external speakers, and other electronics. When dirt and dust build up in these openings, it can cause devices connected to them to malfunction.Since these openings are closed off from the inner workings of a TV, you can use compressed air to safely clean them out. Spray at an angle so you don’t push dirt further into the port and don’t put the nozzle into the port because it could damage the connection.

Learning how to clean a TV screen, the housing, vents, and ports will help your flat screen TV perform at its best. If you have remotes, other audio/video devices, and computers that could stand a scrubbing, check out our guide on cleaning and sanitizing electronics. And when you need help cleaning the rest of your home, The Maids offers flexible, affordable cleaning services for your specific cleaning needs. Get your free estimate online and learn more today.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.

To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.

You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.

Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

Between televisions and computer screens, most readers likely have at least one LCD screen to clean. It’s really important to know how to clean one, but maybe even more important is how NOT to clean one.

The first suggestion I would make is to check your manual for exact cleaning instructions. In many cases, they will recommend their own expensive cleaning solution (more on the contents of that later) but they may also warn about using alcohol or some other cleaners.

Your computer screen will probably get much dirtier than your TV screen, since you cough and sneeze very close to it. Not to mention, whenever somebody else points to something on your screen it is traditional to leave a finger print — that is so you remember exactly where they were pointing until you clean it off during your Friday afternoon time wasting routine.

If you just need to remove dust, use a large microfiber cloth. You can find one on Amazon for about $3.50 and they’re good for cleaning eye glasses, sunglasses, camera lenses and most other optical glass that you don’t want to damage with paper towels or t-shirt sleeves. Click here for one, look at the alternate sellers for the best price ($3.36 at time of writing).

I should note that LCD screens are not glass, they are basically plastic. Do not clean them as if they are glass since many cleaning solutions can permanently damage this material. I found this out the hard way when cleaning the inside of a car I used to own. I was spraying the dashboard with a cleaning solution and some of it got on the clear plastic that was in front of the gauges — it was permanently blemished in one tiny spot. I looked at the instructions on the cleaner and it specifically warned against using on plastic, oops!

Some plasma TVs do have a glass front panes, but in some cases they also have anti-glare coatings on them, don’t use glass cleaner unless it is recommended in the manual.

I checked manuals from almost every major manufacturer and some of them didn’t even include cleaning instructions, but here are the exact cleaning instructions taken from a Toshiba manual:

Always unplug the TV before cleaning. When cleaning your TV, please first remove any dirt or dust from the surface. Gently wipe the cabinet and the display panel surface (the TV screen) with a dry, soft cloth only (cotton, flannel, etc.). The enclosed cleaning cloth is for cabinet cleaning. Harsh rubbing or use of a dirty or stiff cloth will scratch the TV surface. Avoid contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the TV surface. Never spray volatile compounds such as  insecticide on the TV surface. Such products may damage or discolor the TV.

It’s really specific about what not to do, but pretty generic about actual cleaning. As you can see, they actually recommend cleaning the screen with a dry cloth, but sometimes you have stuff stuck to the screen that won’t wipe off. In these cases, you want to use a gentle cleaning solution.

Screen cleaning liquids are available, and they’re relatively cheap compared to the price of your screen. Click here for a link to some on amazon ($7.99).

I looked into Material Safety Data Sheets to find out what is in these cleaners. Manufacturers have to provide these safety sheets for consumer chemicals in case that product is swallowed or comes into contact with eyes or skin. LCD screen cleaners are mostly water but contain some other solutions too.

Kensington Screen Guardian contains “butyl cellosolve” while the Kensington Desktop Screen Cleaner contains “sodium lauryl sulfate” and “anionic tenside”. The Fellowes brand cleaner contains “butoxyethanol”, which is another name for “butyl cellosolve” (same as Kensington Screen Guardian).

These checmicals are surfactants (surface acting agents), which are wetting agents that reduce the surface tension of a liquid, making it easier to spread. These same chemicals are found in many household cleaners, liquid soaps, cosmetics, paint and whiteboard cleaners. They don’t contain alcohol, which mean they are good for your screen but they are still very bad for you. Butoxyethanol has been linked to many illnesses, including autism and various fertility and birth problems, so avoid contact with these substances when you use them, including inhalation.

Television screens are supposed to be clean and free of dirt, dust, or any debris that may blur vision. This is why this component is one of the most vital parts of a Television. Nothing can be worse than straining your eyes to make sense of the pictures your set is projecting. If you do not clean your TV regularly, fingerprint smudges and dust will build up.

Cleaning your LED TV or any type of television for that matter is something you should do at least once every 2 or 3 weeks. In fact, I will suggest that you do it as often as you watch it any paying more attention to the screen when you do so. If you clean your TV set regularly, it will always look brand new, and you will enjoy bright and colorful pictures without said. Bearing that in mind, there are ways to go about a cleaning endeavor. Unfortunately, not everyone knows how to clean a set effectively. Many think that a piece of towel soaked in water will do. How wrong they are. Television screens are very sensitive, so a great deal of care is required to do the job effectively. In addition to that, being careful also protects the screen for damage. Secondly, you need to understand that TV sets are different. Although they all project sounds and images, they are built differently. So, therefore, the approach to cleaning should also be different as well.

The approach to cleaning an LED TV screen, for instance, requires extra care compared to the cleaning of a Tube TV. They both have screens, but the former is more sensitive than the latter due to the sensitivity of LED screens build material. Bearing all this in mind, how do you safely clean an LED TV screen without damaging it in the process. In this article, we will show you safe and intelligent ways to go about it using available and affordable materials. You will also learn a few tips about how to do it safely too.

Before you proceed, you need to bear two things in mind when cleaning LED TV screens. Firstly, you want to do it in such a way and with the right materials that ensure the screen is clean and devoid of dust or stains of any kind. You want your screen to be as bright and clear as possible. Secondly, you want to avoid damaging the screen or reducing its projection quality. This is why it is necessary to use only the right cleaning materials and approach at all times. Now, here are some helpful tips for adopting when cleaning an LED television screen. [/fusion_text]

Every electronic equipment comes with an owner’s manual. This manual provides the user with sufficient information about how to use and maintain the gadget. The same thing goes for LED sets. They come with an owner’s manual too. Before you clean the set, you may want to read the manual first.

In fact, it is advisable that you read it first immediately you buy and install it in your home. By reading the manual, you gain more understanding regarding how to care for the television all through it a lifespan in your home, office, or wherever you install it. For the purpose of cleaning, pay attention to the section that provides information about how to do it effectively.

Reading manuals is important because different television manufacturers provide different approaches to cleaning their sets. What works for an LG LED TV may not work for a Samsung set. That is why it is so important to only follow the recommendation of a one cap fits all approach to cleaning your TV screen. If you read the manual when you bought it, but you have forgotten the cleaning details, consult it once again to refresh your memory.

Before you start the cleaning properly, turn off the television set. Do not stop at that. You also need to unplug it from the power source. Once you have done that, do not start cleaning the screen immediately. Give it time to cool down. The cleaning process may take between 2-5 minutes or even more depend on your LED TV model or how long it was on.

Turning the TV off will cut off power leading to the cooling down of the screen. You don’t want to be cleaning a hot or warm screen, do you? You want to make sure that the screen is as cool as possible and non-reactive to whichever cleaning agent you use.

Another advice to take in that is so important is that you should never use paper towels to clean the screen. There are reasons to avoid paper towels. Paper towels, especially when soaked in water, leave smudges and stains on the screen. No matter how long or how hard you try to wipe the marks off, they yet remain. Paper towels are bad for your TV screen. It’s as simple as that.

To enjoy an ultimate cleaning experience, you should consider using microfiber cleaning pieces. Some people recommend cotton whole because they are more breathable. However, microfiber cloths are more durable. In addition, they do not stick to your screen. Older LED, or LCD screens can’t handle traditional cleaning methods or materials. With microfiber, you can eliminate stains, remove smudges, and fingerprints with ease.

To use microfiber, simply wipe the surface of the screen in a circular motion. Cover as much part of the screen as you possibly can. Work your way around the edges as well. More importantly, when cleaning, avoid touching the screen with your bare hands as doing so will leave fingerprint marks on it.

The use of chemicals should be avoided at all costs. Chemicals damage screens more than you know. That a chemical agent worked on a particular surface is not an indication that it will work well for your TV screen. LED screens are very sensitive and fragile, so you ought to make sure that you keep chemicals as far away as possible. Another material you should never use is a detergent solution (water and detergent).

Soap, scouring powder, was window cleaners, and any other general industrial cleaner should be avoided. Abrasive pads and towels made from paper should not be used either. Using any of these materials will lead to screen scratches, anti-glare coating damage, or permanent screen damage. The sad part is that the damage may not be noticeable at first, but over time, the same will become permanent.

If you must wet your cleaning material with water, do so in little splashes. Avoid spraying the screen directly with water. When wiping the screen, do so gently because it can break if pressed too hard as screens are very fragile.

You will notice that your microfiber cloth cannot reach the edges of the screen like the other areas. If you don’t clean the edges too, dust and first will accumulate in those parts, and after a time removing the stains will love difficult. Furthermore, failure to clean screen edges will lead to an uneven appearance, with poor picture quality being the end result. To clean edges and corners effectively, use cotton swabs to greater effect. For better results, dab the cotton swabs in water. Pick off the dirt carefully by dragging them out using the swabs. Do this for the four corners of the screen.

As for the edges, run the swabs up and down systematically but avoid running them all the way down to the edges as this may drive dirt further on that may be difficult to remove. For better results, use as many cotton swabs as you can.

Unlike an LED TV screen, cleaning a Tube TV is much easier. Tube TV screens are more rugged and can withstand pressure, but doing so carefully is also important. You can use a microfiber cleaning cloth doused in a little water. Never spray the screen directly as this may damage it. Rather, work your way with the microfiber cloth. Apply the same circular cleaning motion like you would do an LED TV screen. Cotton swabs will also come in handy to pick off the dirt from the screen corners.

Dish soap can also be used on LED and LCD screens, albeit with care. Before you use a dish soap solution, first wipe the screen with a dry cloth to remove dust. Now, dip your cleaning cloth in the dish soap solution. Squeeze off the liquid then gently wipe the screen. Make sure you cover every surface area. Once you are done, don’t waste time to clean; otherwise, the solution will dry up on the screen leading to a blurry vision. Rinse the cloth with water to remove soapy residue then take the dry cloth you used to wipe off the dust once again to dry the screen.

Yes, they do. There are actually cleaners specially made for cleaning tv screens. Screen cleaners contain distilled water, isopropyl, and alcohol solutions. If you must use an electronic screen cleaner, make sure you shake to content before use. Also, apply on a limited portion of your cleaning cloth.

Cleaning your TV remote control is part of a general TV cleaning process. So to clean your remote control, follow these tips. Pop-out the batteries:Remove the batteries from the remote. Doing so will create enough room when cleaning the interior casing.

Tap the remote lightly on a hard surface:Remote controls gather a lot of dust and debris along the way. To remove them, tap the remote control on a hard surface like a table. Do this gently and several times to dislodge debris stuck in crevices.

Use a mild disinfectant:Apply a cleaning disinfectant on a piece of cloth and clean the body thoroughly. The use of disinfectant is necessary because our hands carry germs, and we transfer these germs to the remote control anytime we operate it. Clean the whole body thoroughly.

Maintain a weekly timetable:To ensure that your TV set is always clean, make sure you clean it weekly. Add it as part of your to-do list when cleaning your home. If your furniture deserves regular cleaning, so does your television set. Doing regular cleaning will atop dust, debris and fingerprints from smearing the screen. It is also much easier to clean when there is little dust on the surface. Keeping a microfiber cloth close by is also advised so that you can quickly wipe off dust when necessary.

Never spray your LED TVset directly with any substance:Avoid spraying your screen directly with any substance even if it is an electronic cleaning gel. Excessive spraying can damage the cabinet and the structural make-up of the screen. If you must use any cleaning solution, apply it on the napkin or microfiber cloth you are using and gently wipe the screen with it.

Use a Vacuum:To draw out dust and debris hidden in the crevices of the set, use a low suction vacuum. You may also use the vacuum cleaner’s soft brush to remove dust from the cable, vents, and ports of the TV

Adhere strictly to the User Manual:Your LED TV set comes with a user manual for a reason. The manual is meant to guide your use of the device. When cleaning your set, make sure you follow the directives of the manufacturer. Doing it any other way may damage the TV beyond repair.

Avoid strong cleaning agents:Just like we pointed out in the article, avoid strong cleaning agent as not all of them are good for your television’s screen. The screen is very sensitive, so bear this in mind. Some examples of cleaning agents to avoid include unmixed alcohol, ammonia, acetone, and Wax.

Maintaining your LED TV set requires a lot of patience and attention to detail. If you want the screen to remain in good shape, you need to clean it regularly and with proper cleaning materials. If you follow the tips in this article, your screen will remain bright and sharp for as long as you use the set.