powertip character lcd module factory

Powertip has grown to become a leading manufacturer of small to mid-size full color TFT and monochrome displays as well as resistive and capacitive touch panels. Powertip is headquartered in Taichung, Taiwan with production facilities located in Taiwan and Nanjing, China. Powertip’s product offerings address major industries to include medical, industrial, automotive, consumer, white goods, communications, test and measurement and gas pumps / parking meters.

Powertip’s manufacturing capabilities comprise Surface Mount Technology (SMT), Chip-On-Board (COB), Chip-On-Glass (COG), Chip-On-Flex (COF), Tape Automated Bonding (TAB) and screen printing. Production of a typical LCD panel would require Powertip to take Mother Glass, scribe, cut, fill the cells with liquid crystal and then seal the two sandwiched glass panels. Powertip would then add polarizers, color filters and all other required backend manufacturing processes to create a completed LCD module to specification.

We offer LCD modules, HMI and embedded solutions including: Smart UART display, MPU embedded display, TN/STN/FSTN LCM, COG LCM, TFT LCM, FSLCD, graphic LCM, character LCM, custom LCD, custom LCM, EM touch display, projected capacitive touch display, resistive touch display and EMS.

LCD panel:The driving voltage for most all LCD panels is above 3.3V. It is necessary to then add a “negative voltage” IC on the PCB of the module or to the customer’s motherboard to raise the voltage. A couple of NV generators is as follows:

Observe ANTI-STATIC precautions when storing or handling these LCD modules. Reverse polarity connection to the module will cause irreparable damage. Powertip Reflective LCD TN / STN. Reflective alphanumeric TN and STN dot matrix modules with integral LCD display drivers utilising a 5 ;font face="symbol">´ ;/font>7 dot matrix format (except 20 ;font face="symbol">´ ;/font>4 which uses 5 ;font face="symbol">´ ;/font>8) with cursor. 160 characters and symbols Supertwist (STN) modules give 100% improvement in contrast ratio and viewing angle compared to the Twisted Nematic (TN) type CMOS controller and driver Parallel Interface to 4 or 8 bit microprocessor Display commands: clear, shift, on/off, read, write Cursor commands: home, on/off, shift, set direction Operating temperature range 0°C to +50°C. * All modules operate on +5V.d.c. which can be obtained by using voltage converter stock no. ; 651-490 651-490 , in the semiconductors - power supply and control section.

With more than 3,300 employees in production and engineering and with factories in China and Taiwan, Powertip is a leader in LCD displays. Founded in 1991, Powertip now has more than 90,000 m2 of production space and can therefore effortlessly respond to all issues and developments in the market for a wide range of LCD technologies and applications.

Within LCD manufacturing, Powertip has many different products on offer, with more than 79 standard series and more than 1,000 different model configurations. This makes Powertip a uniquely positioned manufacturer with an exceptional diversity and flexibility in development and production.

Powertip has with an ISO quality certificate and a reputation for being a very proactive and innovative player built up a leadership position in the current display market, reinforced by a global network of reliable, representative partners. This makes the application of Powertip displays a safe choice. For use in a wide range of applications and machines, Powertip can offer the right display solution.

The Displaytech 162K series is a lineup of 16x2 character LCD modules. These modules have an 85x30 mm outer dimension with 66x16 mm viewing area on the display. The 162K 16x2 LCD displays are available in STN or FSTN LCD modes with or without an LED backlight. The backlight color options include yellow green, white, blue, pure green, or amber color. Get a free quote direct from Displaytech for a 16x2 character LCD display from the 162K series.

We offer LCD modules, HMI and embedded solutions including: Smart UART display, MPU embedded display, TN/STN/FSTN LCM, COG LCM, TFT LCM, FSLCD, graphic LCM, character LCM, custom LCD, custom LCM, EM touch display, projected capacitive touch display, resistive touch display and EMS.

LCD Display Modules└ LEDs, LCDs & Display Modules└ Electronic Components & Semiconductors└ Electrical Equipment & Supplies└ Business & IndustrialAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

With more than 3,300 employees in production and engineering and with factories in China and Taiwan, Powertip is a leader in LCD displays. Founded in 1991, Powertip now has more than 90,000 m2 of production space and can therefore effortlessly respond to all issues and developments in the market for a wide range of LCD technologies and applications.

Within LCD manufacturing, Powertip has many different products on offer, with more than 79 standard series and more than 1,000 different model configurations. This makes Powertip a uniquely positioned manufacturer with an exceptional diversity and flexibility in development and production.

Powertip has with an ISO quality certificate and a reputation for being a very proactive and innovative player built up a leadership position in the current display market, reinforced by a global network of reliable, representative partners. This makes the application of Powertip displays a safe choice. For use in a wide range of applications and machines, Powertip can offer the right display solution.

Flat-panel displays are thin panels of glass or plastic used for electronically displaying text, images, or video. Liquid crystal displays (LCD), OLED (organic light emitting diode) and microLED displays are not quite the same; since LCD uses a liquid crystal that reacts to an electric current blocking light or allowing it to pass through the panel, whereas OLED/microLED displays consist of electroluminescent organic/inorganic materials that generate light when a current is passed through the material. LCD, OLED and microLED displays are driven using LTPS, IGZO, LTPO, and A-Si TFT transistor technologies as their backplane using ITO to supply current to the transistors and in turn to the liquid crystal or electroluminescent material. Segment and passive OLED and LCD displays do not use a backplane but use indium tin oxide (ITO), a transparent conductive material, to pass current to the electroluminescent material or liquid crystal. In LCDs, there is an even layer of liquid crystal throughout the panel whereas an OLED display has the electroluminescent material only where it is meant to light up. OLEDs, LCDs and microLEDs can be made flexible and transparent, but LCDs require a backlight because they cannot emit light on their own like OLEDs and microLEDs.

Liquid-crystal display (or LCD) is a thin, flat panel used for electronically displaying information such as text, images, and moving pictures. They are usually made of glass but they can also be made out of plastic. Some manufacturers make transparent LCD panels and special sequential color segment LCDs that have higher than usual refresh rates and an RGB backlight. The backlight is synchronized with the display so that the colors will show up as needed. The list of LCD manufacturers:

Organic light emitting diode (or OLED displays) is a thin, flat panel made of glass or plastic used for electronically displaying information such as text, images, and moving pictures. OLED panels can also take the shape of a light panel, where red, green and blue light emitting materials are stacked to create a white light panel. OLED displays can also be made transparent and/or flexible and these transparent panels are available on the market and are widely used in smartphones with under-display optical fingerprint sensors. LCD and OLED displays are available in different shapes, the most prominent of which is a circular display, which is used in smartwatches. The list of OLED display manufacturers:

LCDs are made in a glass substrate. For OLED, the substrate can also be plastic. The size of the substrates are specified in generations, with each generation using a larger substrate. For example, a 4th generation substrate is larger in size than a 3rd generation substrate. A larger substrate allows for more panels to be cut from a single substrate, or for larger panels to be made, akin to increasing wafer sizes in the semiconductor industry.

"Samsung Display has halted local Gen-8 LCD lines: sources". THE ELEC, Korea Electronics Industry Media. August 16, 2019. Archived from the original on April 3, 2020. Retrieved December 18, 2019.

"TCL to Build World"s Largest Gen 11 LCD Panel Factory". www.businesswire.com. May 19, 2016. Archived from the original on April 2, 2018. Retrieved April 1, 2018.

"Panel Manufacturers Start to Operate Their New 8th Generation LCD Lines". 대한민국 IT포털의 중심! 이티뉴스. June 19, 2017. Archived from the original on June 30, 2019. Retrieved June 30, 2019.

"Samsung Display Considering Halting Some LCD Production Lines". 비즈니스코리아 - BusinessKorea. August 16, 2019. Archived from the original on April 5, 2020. Retrieved December 19, 2019.

Herald, The Korea (July 6, 2016). "Samsung Display accelerates transition from LCD to OLED". www.koreaherald.com. Archived from the original on April 1, 2018. Retrieved April 1, 2018.

"China"s BOE to have world"s largest TFT-LCD+AMOLED capacity in 2019". ihsmarkit.com. 2017-03-22. Archived from the original on 2019-08-16. Retrieved 2019-08-17.

Founded in 1991, Powertip Technology has become one of the true leading manufacturers of Liquid Crystal Display (LCD) technology. Powertip is fully equipped to handle the market needs for Color STN, chip-on glass (COG), chip-on film (COF), tape-automated-bonding (TAB), chip-on board (COB) and surface-mount technology (SMT) LCD module designs. With over 79 series (comprising over 1000 configurations) of standard LCD modules, Powertip is uniquely positioned in the marketplace today. Very few manufacturers of LCD modules can affirm this diversity of standard product.

About products and suppliers:powertip lcd provide the touch interface in smartphones, which are vital for them to function. Alibaba.com stocks a stunning range of high-tech powertip lcd with vibrant color depictions. Truly crystal-clear displays of powertip lcd are available covering various brands and models such as the Samsung Galaxy Edge 2, OnePlus 7T, Samsung Galaxy C5, and many more.

powertip lcd are the most commonly used displays, as they produce great image quality while consuming low power. Rather than emitting light directly, they use back lights or reflectors to produce images, which allows for easy readability even under direct sunlight. powertip lcd are energy-efficient, and are comparatively safer to dispose of, than CRTs. powertip lcd are much more efficient when it comes to usage in battery-powered electronic equipment, due to their minimal power consumption.

Some other advantages of powertip lcd over the CRT counterparts are - sharper images, little to no heat emission, unaffected by magnetic fields, narrow frame borders, and extreme compactness, which make them very thin and light. Some types of powertip lcd are transmissive, reflective, and transflective displays. Transmissive displays provide better image quality in the presence of low or medium-light, while reflective displays work best in the presence of bright light. The third type of powertip lcd, transflective, combine the best features of both the other types and provide a well-balanced display.

Whether as an individual purchaser, supplier or wholesaler, browse for an extensive spectrum of powertip lcd at Alibaba.com if you don"t want to stretch a dollar yet find the best fit.

Powertip Technology was established in 1991.  We are dedicated to be the most trusted and professional LCD Display Module manufacturer.   With  headquarter  in Taichung, Taiwan, and  manufacturing facility in Zhenjiang, China, there are more than 1100 employees and 58,000  square meter shop floors.  We offer LCD module, including: TN/STN/FSTN LCM, COG LCD, TFT LCM, FSLCD,  graphic LCM, character LCM,  custom  LCD, custom LCM,  TFT HMI board, custom LCD display and projective capacitive  touch display , resistive touch display.

Powertip Technology Corporation – a company established in 1991 has grown to become a leading manufacturer of small to mid-size full color TFT and monochrome displays as well as resistive and capacitive touch panels. Powertip is headquartered in Taiwan with production facilities located in Taiwan and China. Powertip’s product offerings address major industries to include medical, industrial, automotive, consumer, white goods, communications, test and measurement and gas pumps / parking meters.

Powertip’s manufacturing capabilities comprise Surface Mount Technology (SMT), Chip-On-Board (COB), Chip-On-Glass (COG), Chip-On-Flex (COF), Tape Automated Bonding (TAB) and screen printing. To meet customer demands, Powertip has developed an STN/VATN LCD module technology with in-cell touch capabilities, a one-glass-solution (OGS) capacitive touch panel and implemented highly discerning touch panel technologies that offer water proofing and use when wearing gloves.

AU Optronics Corporation (AUO)as formed in 2001 and is a smart displayts solutions provider (TFT LCD, LTPS TFT-LCD, AMOLED, Micro-LED) for diverse verticals. AUO offers clients highly-customized and high-quality products and services. The company’s revenue totaled NT$271.0 billion in 2020. The company employs approximately 38,000 people worldwide, including Taiwan, Mainland China, Japan, Singapore, South Korea, the US, and Europe.

Solomon Goldentek Display Corp. (SGD)– was established in 1990, is committed to continuous efforts in order to stay at the top of display industry. SGD not only manufactures displays products like TN, STN, LCD, but also provides professional services in R&D, production and sales. Application products include: instruments, office equipments, messages, telecom, home appliances, autimotive. SGD has passed ISO 9001, TS16949, RoHS and REACH certification. Company offers also customized solutions.

HTDISPLAY Electronics Co.Ltdis a professional LCD manufacturer in China. Company specializes in various types of TN, VA, HTN, STN & FSTN LCD modules and TFT LCD products size from 0.96 to 15″. HTDISPLAY LCD products are widely applied in following fields: office automation, financial terminals, POS systems, telecommunications, household electrical appliances, medical equipment, auto electronics, electric power, automatic attendance checking systems, meters, fitness equipment, electronic classrooms, control equipment and others.

Ampire Co. Ltd.was established in 1998 and is a manufacturer of small and medium size LCD modules for industrial applications. Company’s offer include TN models, STN mono displays, TFT color displays and AMOLED displays. With such experience, Ampire has sharpened its mastery in the customization of LCD modules. Besides providing a complete lineup of displays, Ampire team also focuses on integral controls and easy display system solutions.

SHENZHEN RIFDA LCD– is a Chinese LCD full process manufacturer. RIFDA products cover TFT, OLED, e-paper and flexible screen. The company’s annual sales amount USD 77million with an annual growth rate of 10%. The Company owns: 2 LCD production lines, 36 automatic COG lines, 2 manual COG lines, 28 automatic FOG lines. In Masters we focus in RIFDA’s icon displays.

Dalian Eastern Display Co., Ltd.is a high-tech professional manufacturer of production, development and application for LCD panels, modules and electronic parts in types of TN, STN and FSTN. Dalian is capable of manufacturing the modules in OEM and ODM with the technologies of SMT, COB, TAB and COG. The company has got the qualification of ISO9001 issued by the international authoritative organization-DNV. The company devotes particularly to the design and production of the customized LCD panels and modules. They are widely used in many electronic parts, such as digital multimeters, fax machines, telephones, public IC phones, electronic scales, clocks, charge meters for taxi, display panels of hi-fi, POS for bank, air conditioner and its remote controls, temperature display panels of refrigerators and control boards in automobiles or motorcycles.

WiseChip Semiconductor Inc.is a professional manufacturer of OLED displays. WiseChip main products include: character type displays, full color OLEDs, monochrome displays, wide temperature range, bendable OLEDs, transparent OLEDs. Products are manufactured according to ISO 9001 and ISO 14001 standards.

Good Displayhas been engaged in the development and assembly for E-ink Display, E-paper Display module, monochrome LCD Display, TFT LCD Display and OLED Display since 2007, and is one of leading manufacturer of displays in China, specializing in providing a Large variety of engineered E-Paper Display, LCD Display and OLED Display for both Standard and customized electronic products. Good Display is well acclaimed by customers for the high quality products. Company obtained management system certificate that fulfils requirements included in the ISO9001 and ISO14001 standard in 2011.