mks 1.4+ tft lcd manufacturer

If you want to change some function or add new function and so on, you can refer to MKS TFT source code and build it, update it to MKS TFT, Link as below:

For more product dynamic information and tutorial materials, you can always follow MKS"s Facebook/Twitter/Discord/Reddit/Youtube and Github. Thank you!

I have a New MKS Gen-L V1.0 3D Printer Controller Board Relacement Ramps 1.4 Mega 2560 R3 and a KINGPRINT 12864 LCD Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa Arduino.

Hi The Marlin firmware for the MKS-TFT32 on a MKS Gen v1.4 board will not compile. Can you please check your file and post the correct working version

What are the changes in the configuration for the the MKS-TFT32 display? I am using the latest version of Marlin 1.1 RC8 and I want to keep using that version.

Same here. I got sent v1.3 of the tft28 display. I turned it on without the sd card and it says “printready” with a bunch of blank icons. I am doing everything right. The SD card is set to fat32 with the 3 files in place. I have tried firmware 1.1.5 and 1.2. Both firmwares will update, but right after, it just says “spi loader PID Erasing”

I just wanted to add that I was having this issue and following this step solved it, at least for me. I had tried to update the MKS-TFT28 firmware before installing Marlin, and that’s when the odd images showed. I installed Marlin and then reinstalled the MKS-TFT28 firmware and all is back to normal.

Hello, i’m using TFT28 on RAMPS 1.4 , is there any way to make it work when i print from computer ? to display temperatures and other info like 12864 graphic LCD does ?

but if i print from COMPUTER through USB the TFT28 remain in main screen, does not show temperatures , fan speed or progress of printing like other lcd displays.

Hi I got the mks 1.5 board and the touch screen 3.2. Evey thing seems to work, till i go to print from the usb. Then the printer just sits there. I can move all axis I can pre heat and home all axis. and i can print from computer but stand alone cant print. Any ideals whats wrong

I have a MK Gen board, a TFT28 and a WIFI module. When the wifi module is plugged into the TFT28 and power is applied to the Gen board nothing happens. Without the wifi the Gen and the TFT power up no problem. Is this a firmware problem? Or a power problem. Right now I am on the bench using USB cable to power everything.

Hello. I purchased MKS SBASE V1.3 + MKS TFT32 3.2” LCD Touch Display. Please help me to connect the display to the base. Menu is working, but info from the base not receive.

I have the MKS SBASE V1.3 & MKS TFT32 3.2″.After updating the firmware I noticed there no long has the ‘Set>Connect’ icon. How do I change the baud rate now? Or even see what it is set to.

Today I got a MKS TFT 3.2 in a bundle with a MKS sbase. I connected it with the AUX1 ports on both devices and plugged the board into an USB port. The board seems to work, but the TFT is just dead. On pictures in the internet I can see that there should at least light up a LED on the backside, but there is nothing.

I just noticed that the TFT gets its 5V not from the USB but from the 12V that I had not connected to this time. I had the impression from some picture in the internet that the display would work with just USB power from the board too. Now with 12V attached it works.

I would like to use a sketch of Marklin from another source. What is different about your version? Can you provide the code and where it goes so I can put it into another version? I am using the tft 3.2 controller. Many thanks!

Hi my TFT32 dose not seem to communicate with my mks sbase 1.3 connections are all OK firmware is updated to v2. however when you press on any of the icons nothing happens any ideas

I just assumed it was an upgraded version, but now I’m reading that they are completely different boards. I ordered the SBASE because I wanted to run smoothieware. Am I correct to assume that I can not install smoothieware on the MKS BASE v1.5?

Hi, please follow the instruction for MKS BASE V1.5 board to install firmware: https://osoyoo.com/2016/06/30/mks-1-4-3d-printer-board-marlin-firmware-installation-guide/

Elaine, I should clarify that I ordered the SBASE v1.3 from a seller on Amazon 4 months ago, but received the wrong board. I haven’t had a chance to start setting it up until now. Is it still true that the 32TFT in not compatible with RAMPS 1.4? If it’s not compatible with RAMPS 1.4, then can I install Smoothieware on the BASE v1.5, or can you tell me what my other options are?

My new mks tft32 touch screen is only showing one extruder.I have a tevo tarantula with dual extruders.Is there any way to show both extruders on the screen please?

Is the source code of the TFT32 available somewhere? Because most of the current menus are useless to me and I need to reconfigure my TFT32 to more useful functions for my CNC.

Hi. I just got a new FLSun Cube printer with the TFT32 screen and the mks gen l v1.0 main board. When I changed the custom loading graphic from the standard RepRap logo to my own graphic following the instructions in the guide, I get an FLSun logo overlayed in the middle of my graphic. Where is this logo coming from?

I purchased 2 of these. One to use on a Smoothieware board and the other to use on a Rambo 1.1 printer. I didn’t realize this had different connectors than those on the Rambo. Is there an adapter which will permit me to use the KINGPRINT 3D Printer Controller Board MKS TFT32 with a Rambo 1.1 board?

MKS TFT 2.4 inch touch screen to control a 3D printer or CNC machine.  This high quality touch screen is a controller on its own, because it has own processor onboard and does not rely on the processor of the 3D printer or CNC machine.  Due to this the screen features a 2.4 inch full colour touch screen, can be integrated with WIFI upgrade, can read a SD card, can detect power failure with power detection module and filament runout with runout module.

MKS TFT 2.4 inch touch screen to control a 3D printer or CNC machine.  This high quality touch screen is a controller on its own, because it has own processor onboard and does not rely on the processor of the 3D printer or CNC machine.  Due to this the screen features a 2.4 inch full colour touch screen, can be integrated with WIFI upgrade, can read a SD card, can detect power failure with power detection module and filament runout with runout module.

When it comes to makerbase mks, the are two terms that are used interchangeably when people look for makerbase mks papers and they are not the same. makerbase mks print on a smaller size than makerbase mks, they all come in different sizes and shapes.

When it comes to maker base mks, maker base mks are in the form of maker base mks, and maker base mks. There are several differences between maker base mks and maker base mks.

makerbase mks are one of the most common types of printers. While makerbase mks are versatile, maker base mks are mostly used for printing on large-scale printing, a design company, and in some of the most common types of printers. While their size varies depending on the design and make base mks, maker base mks are one of the most common types of office printers.

Hi alzathoth try logging on to http://www.makerbase.com.cn for info on your touch screen needs the MKS TFT28 will work with Ramps1.4,MKS Base, MKS Gen, MKS Mini, as well as MKS SBase,etc. direct quote from maker base . They also have a Alibaba site too. You can purchase parts there ( it takes a while to receive them tho ) that you need. I have just bought 1 month ago A MKS TFT 32 touch screen for my Sunhokey Prusa i3 from Makerbase Alibaba site. Works perfect !!!