pihole 2.8 tft lcd sheild for sale

This guide will show you how to setup and configure your Pi hole to display the pi hole system status and ads blocked using the Pi Supply Media Center HAT. The Pi Supply Media Center HAT is a 2.8″ TFT display that connects to your Raspberry Pi, and includes other feature such as IR receiver, restive touch and navigation buttons that can be soldered to the PCB.

Step 4 – Install the Media Center HAT software. We want to display the main output on the TFT display only, from the command line type in the following:

This requires installing PADD (Pi-hole Ad Detection Display) and Pi-Hole on the Adafruit 2.8" PiTFT Plus to display useful and fun statistics such as Amount of Pi-holed Advertisements,and the top offending domain attempting to serve pesky advertisements to your network.

PiTFT Plus Assembled 320x240 2.8" TFT - one of the cutest little display for the Raspberry Pi. It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay.

I purchased this kit for the Raspberry Pi, the LCD screen just connects to the Raspberry Pi GPIO pins. It has a Adafruit LCD screen and a case for my Raspberry Pi 3B+

When my Samsung SD card died I had to re-setup a new SD card but the IP address came across as the mac address stayed the same (as it was the same hardware), I did, however, change the name of the Static IP hostname in my home router to match the new name “raspberrypihole” (not “pihole”)

Before I add computers on my network to the PiHole I had better uninstall the nextdns.io (my blog post about NextDNS.io here) as the Pi will now be the main DNS blocking Sinkhole in our house.

After 20 hours or rining computers through the Pi-Hole Admin interface I loaded the PiHole Admin Interface (at http://192.168.0.201/admin/index.php) was reporting stats.