5in lcd touch screen raspberry pi made in china

-The 5 lcd touch screen raspberry pi USES industrial grade chip CYPRESS IC, which has strong anti-interference performance and can be used in a variety of complex application environments. Such as work well with 3-10mm thickness tempered glass, water, gloves, seawater, 5% saline and PC onside.

-The 5 lcd touch screen raspberry pi is a 10 points PCAP touch screen equipped with 720*1280 lcd display which is available to show the picture or video clearly with the comfortable and wonderful using experience.

-The 5 lcd touch screen raspberry pi: touch screen interface is I2C interface, but we can convert I2C interface into USB interface through USB converter; LCD screen interface is MIPI interface, and we can convert MIPI interface into H DMI interface through H DMI converter.

A: We have some mature projects cases and the best way is to connect the touch screen directly through USB interface to the Raspberry Pi or the orange Pi, and the display can be directly connected through HDMI interface, this way the whole solution can be implemented through plug and play.

Large size touch screen will be designed directly with USB interface, small size is general designed with IIC interface, so we will do is to provide the board which changes the IIC into USB. however, customers need to contact our technicians to check the configuration and software system.

For display, we can provide RGB to HDMI, LVDS to HDMI, MPI to HDMI, EDP to HDMI and other driver boards to realize the connection with Raspberry Pi and orange pi;

Projected capacitive 5 inch touch screen raspberry pi, support operation with gloves, water , and works well with additional 10mm thick tempered glass on the top, mainly used in outdoor handheld terminal, industrial field, smart home appliances and other fields, deep customization available.We can provide " I2C TO USB "bridge board , " MIPI TO HDMI" bridge board and "RGB TO HDMI" driver board .

Viewing Angle:70/70/50/70Support Systems:Windows/Android/Linux etc.Light Transmittance:≥85%Surface Hardness:≥6HInterface Type:I2C/USBController IC:CypressTouch Points:1-10 Points

Viewing Angle:ALLSupport Systems:Windows/Android/Linux etc.Light Transmittance:≥85%Surface Hardness:≥6HInterface Type:I2C/USBController IC:CypressTouch Points:1-10 Points

■ Technical support :We have more than 10 years of experience in touch screen industry, with a professional technical team, can always provide technical support for you.

This is a 5" Raspberry Pi LCD touchscreen with 800*480 resolution and 108×64.8mm display area. The product supports Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points.

The special holes design on the back of the screen is convenient to directly install the Raspberry Pi in the product. There is no need to provide external power for the touchscreen as the Raspberry Pi power supply is adopted. In addition, the screen supports hardware backlight adjustment. The function can be realized by turning the potentiometer on the back of the display.

Compatible and Direct-connect with any revision of Raspberry Pi. (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).

Raspberry Pi leads out 40 GPIO pins, while the screen leads out 26 pins. When connecting, pay attention to the corresponding pins and Raspberry Pi pins.

5) Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for more than 10 seconds to display normally. But the touch is abnormal at that time, and the touch needs to be calibrated as the following steps.

3. After reboot, touch will work normally under normal circumstances. But for different resistance screens, the accuracy of using the default calibration parameters may not be very suitable.

You can perform touch calibration by clicking the Raspberry Pi icon on the taskbar, selecting Preferences -> Calibrate Touchscreen, and following the displayed prompts.

4. After calibration, the following data will be displayed. If you want to save these touch values, you can replace the data in the red circle with the data in the corresponding position in 99-calibration.conf.

Since the ads7846.dtbo provided by Raspberry Pi by default has no de-jitter parameters, you can increase the de-jitter parameters by modifying and replacing ads7846.dtbo

The installation of xserver-xorg-input-evdev and xinput-calibrator in Ubuntu system reports an error, so the touch cannot be used normally. How to solve it?

The installation of xserver-xorg-input-evdev and xinput-calibrator in Kali system reports an error, so the touch cannot be used normally. How to solve it?

PO Box, APO/FPO, Afghanistan, Africa, Alaska/Hawaii, Albania, American Samoa, Andorra, Argentina, Armenia, Azerbaijan Republic, Bahrain, Bangladesh, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Brazil, Brunei Darussalam, Cambodia, Central America and Caribbean, Chile, China, Cook Islands, Ecuador, Falkland Islands (Islas Malvinas), Fiji, French Guiana, French Polynesia, Georgia, Germany, Gibraltar, Greece, Greenland, Guam, Guernsey, Guyana, Iceland, India, Indonesia, Iraq, Jersey, Jordan, Kazakhstan, Kiribati, Kuwait, Kyrgyzstan, Laos, Lebanon, Liechtenstein, Macau, Macedonia, Maldives, Marshall Islands, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Nauru, Nepal, New Caledonia, Niue, Oman, Pakistan, Palau, Papua New Guinea, Paraguay, Peru, Russian Federation, Saint Pierre and Miquelon, San Marino, Serbia, Solomon Islands, South America, Sri Lanka, Suriname, Svalbard and Jan Mayen, Taiwan, Tajikistan, Tonga, Turkmenistan, Tuvalu, US Protectorates, Ukraine, Uzbekistan, Vanuatu, Vatican City State, Venezuela, Wallis and Futuna, Western Samoa, Yemen

Note:①After the test under the above reliability conditions, the specimen should be stored in a standard environment for 24 hours before the functional test is OK.②The reliability test should be performed with no D.C. power supplied and the touch panel stored on the flat plate.③The standard condition presents 25±10°C of the temperature, 55±30%of the relative humidity, and 96±10 kPa of the atmospheric pressure.④The reliability test should be performed on the touch panel by itself.

This 7 Inch Raspberry Pi Touchscreen is customized forRaspberry Pi, but it is not limited to the 7-inch HDMI display of Raspberry Pi, 1024x600 HD resolution, with capacitive touch screen. This product is also a universal HDMI display, users can use it on other mini PCs (drive support is required), or even use it as a computer monitor.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example on Bullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But on Buster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.

This HDMI raspberry pi display is with 800 x 480 resolution, we design a protective case for it, and it need you to assemble it, You could look for the below QA to download the tutorial or contact us by email to get.

When the 5 inch monitor work with RPI, it don"t need external power supply. This screen power supplied and can be touched by GPIO, display by HDMI. If it is powered by external power, there will be no touch function, and please use 5V2A power supply to power it.

Raspberry Pi OS provides touchscreen drivers with support for ten-finger touch and an on-screen keyboard, giving you full functionality without the need to connect a keyboard or mouse.

The 800 x 480 display connects to Raspberry Pi via an adapter board that handles power and signal conversion. Only two connections to your Raspberry Pi are required: power from the GPIO port, and a ribbon cable that connects to the DSI port on all Raspberry Pi computers except for the Raspberry Pi Zero line.

This 5 inch portable touchscreen monitor is designed for maximum flexibility and portability with various applications such as mini PC, laptop and game console. It has HDMI display port for video and micro USB port for touch & power supply. Featuring 800*480 resolution, 126g in weight, removable prop stand and a high quality built-in speaker, this 5" small screen is your perfect choice for DIY projects and on-the-go use.

*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example onBullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But onBuster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.

Build-in high-quality loudspeaker, offers crisp audio output when watching movies and playing games. Press the buttons on the back of the screen, backlight & volume could be adjusted according to you needs.

Compatible with Windows PC, Raspberry Pi 4/3/2, Switch, PS4, Xbox One and other devices which has HDMI interface. Supports multiple OS like Raspbian, Ubuntu, Kali, Windows etc.

The Raspberry Pi could be mounted on the back of the screen easily. Screws are included in the package. To keep the CPU cool, a cooling fan Kit + heatsink cooler are provided.

Generally it works with most devices with standard HDMI interface, but please note that the touch function is just for windows and raspberry pi systems.

SpecificationModel: RC050SSize: 5 InchResolution: 800x480Touch: 5 points Capacitive TouchscreenInterface: HDMI & USBSpeaker: SupportPanel Dimension: 4.7x3x0.5 inchPackage size: 5.5x 5.3x2 inchPanel Weight: 126gProduct Weight: 162gPackage Weight: 222gPackage List:1 x 5 inch Monitor2 x HDMI Connector2 x USB Connector4 x Screw1 x Small Fan2 x Long cooper pillars2 x Short cooper pillars1 x User manual

If you didn"t receive your product after 6 months or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.

For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!

We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.

If buyer"s reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.

We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.

We can be reponsible for exchange new one or repair for the defective products which you bought from us, but you must send back us the defective product to us and also pay for the return shipping cost. The buyer must bear the shipping cost of return for exchange.

We only accept to exchange after we get the defective products received. As it is international shipping, it usually will take a longer time for your return package, please understand about this.