lcd panel printing in stock

For example, a 5.5inch 2K Sharp04(LS055R1SX04) screen’s LCD active area is 68.04mm(H)x120.96mm(V), which marks as 120*68 printing size in the printer’s specification.

Each pixel is usually composed of 3 sub-pixels, a red, a green, and a blue one. This had been one of the few features of LCD performance that remained uniform among different designs.

The LCD itself is only a light valve and does not generate light; the light comes from a backlight that is either fluorescent or a set of LEDs. Brightness is usually stated as the maximum light output of the LCD, which can vary greatly based on the transparency of the LCD and the brightness of the backlight. In general, brighter is better[citation needed], but there is always a trade-off between brightness and power consumption.

The LCD manufacture said that the transmission is around1% for normal RGB LCD under 405nv UV LED light source. The lifespan is also very shorter work with UV light,

To solve this issue, LCD manufacture is trying hard to improve the transmission such as increasing the aperture ratio, also there comes out a monochrome LCD screen that can reach about 6% transmission, With better lifespan and better printing speed.

The LCD Panel controls where UV light is blocked or let through to form the shape of the print layer on your Peopoly Phenom Noir. After several hundred hours of using your Noir 3D printer, you may need to replace the LCD panel to maintain print fidelity. Each Peopoly Phenom model uses an LCD panel dedicated to that printer"s form factor, so make sure to select the correct panel for your machine.