1.8 tft display breakout and shield st7735r preliminary made in china

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The 1.8" display has 128x160 color pixels. The TFT driver (ST7735) can display full 18-bit color. The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector)

In the above example, Node32-Lite and this 1.8-inch LCD.  Please refer to the tutorial here: ST7735S interfacing with ESP32 to make the connections, Arduino library installation, and modification needed for it to works on this LCD.

The TFT display is a kind of liquid crystal LCD that is connected to each pixel using a transistor and it features low current consumption, high-quality, high-resolution and backlight. This 1.8-inch full color LCD has a narrow PCB screen. The resolution is 128×160 pixels and it has a four-wire SPI interface and white backlight. The driver is ST7735R.

Afghanistan, Albania, Algeria, Andorra, Angola, Anguilla, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan Republic, Bahamas, Bahrain, Bangladesh, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, British Virgin Islands, Brunei Darussalam, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cape Verde Islands, Cayman Islands, Central African Republic, Chad, Chile, China, Colombia, Congo, Democratic Republic of the, Congo, Republic of the, Costa Rica, Croatia, Republic of, Cyprus, Czech Republic, Côte d"Ivoire (Ivory Coast), Denmark, Djibouti, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon Republic, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Korea, South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritania, Mauritius, Mexico, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norway, Oman, Pakistan, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Rwanda, Saint Helena, Saint Kitts-Nevis, Saint Lucia, Saint Pierre and Miquelon, Saint Vincent and the Grenadines, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, South Africa, Spain, Sri Lanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, United Arab Emirates, United Kingdom, United States, Uzbekistan, Vanuatu, Vatican City State, Vietnam, Wallis and Futuna, Western Sahara, Western Samoa, Yemen, Zambia, Zimbabwe

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 1.8" display has 128x160 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

This is really just a first version, and I expect to enhance it over the coming days/weeks. The Openscad file is included in case you want to modify it...

This is an LCD project box for the ST7735S 128x160 1.8" TFT LCD. It flushes the LCD flat and has a snap down mechanism for the whole unit and 4 pegs for holding the LCD steady inside. The rear spacer block will hold the LCD flat in a proper...

A small, thin and light 1.8 inch TFT LCD wall mount. The mount is composed out of two pieces, a wall bracket that screws into the wall (or other panel) and a cover which hides the screws and holds the display in place. To route the display cable you...

A rough model I made for my own use. Very low detail and poly. ...Great for rough estimate of sizeLink to Adafruit product site:https://www.adafruit.com/product/358

This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing (

LowCost SPI Display from Aliexpress 3,50€https://www.aliexpress.com/item/1pcs-128X160-Dot-1-8-Serial-SPI-TFT-LCD-Panel-Module-ST7735S-Display-Screen-PCB-Adapter/32580427101.html?spm=a2g0s.9042311.0.0.eGGcU7

I use it with tft module like this: http://www.aliexpress.com/item/Dealmine-Festival-1-8-SPI-TFT-LCD-Display-Module-Serial-PCB-Adapter-Power-IC-for-SD/32337705617.html?spm=2114.32010308.4.63.O5yaz5 That"s not place there I bought my screen but...

Probably(^_^); https://www.elecrow.com/wiki/index.php?title=1.44%27%27_128x_128_TFT_LCD_with_SPI_Interface TFT 1.44 inches 128 x 128 dots Because it is Chinese quality, there is no official product name.

I had an application where I needed the LCD display to be separate from the Arduino (Wemos D1). This let me run a ribbon cable from the panel to behind where the arduino was mounted.