kdl60r550a lcd panel made in china

(WARNINGS AND CAUTIONS) USE CAUTION WHEN HANDLING THE LCD PANEL When repairing the LCD panel, be sure you are grounded by using a wrist band. When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. Do not press on the panel or frame edge to avoid the risk of electric shock.

(S ELF DIAGNOSIS FUNCTION ) [SELF DIAGNOSTIC SCREEN DISPLAY] SELF CHECK Item name BACK << 002 MAIN_POWER 003 TUNER_ERR 003 AUDIO_PROT 003 DC_ALERT1 004 BALANCER_ERR STBY LED flash time Error count 005 TCON_ERR 005 PANEL_POWE 006 BACKLIGHT_ERR 007 TEMP_ERR 12345-67891-23456 [Home] Exit Panel operation time by hour (Boot...

1-811-832-11 LCD PANEL (L500FFF3) 1-492-330-11 SWITCH UNIT 1-846-734-21 CABLE, ANTENNA 1-846-734-11 CABLE, ANTENNA 1-910-108-30 FFC CABLE 50 MB-IR 10P 1-895-376-21 MOUNTED PWB H for KDL-50R550A 4-464-819-01 BEZEL (50FUGF) 4-464-819-11 BEZEL (50FUGF) for KDL-50R556A 7-682-947-01 SCREW, +PSW M3X6 KDL-50R550A/556A, 60R520A/550A, 70R550A(CH)

( Part Name ) : CUSHION, PANEL (495X20) ( Part Number ) : 4-470-607-01 ( Note: Symmetry ) 10 2 ( Part Name ) : CUSHION, PANEL (180X4) ( Part Number ) : 4-470-608-01 ( Note: Symmetry ) (Hold the FFC cable) KDL-50R550A/556A, 60R520A/550A, 70R550A(CH)

1-1. KDL-50R550A/556A 1-1-5. ( CUSHION, PANEL ) -2 ( Part Name ) : CUSHION, PANEL (70X40) ( Part Number ) : 4-470-609-01 ( Corner end ) ( Corner end ) KDL-50R550A/556A, 60R520A/550A, 70R550A(CH)

( DISASSEMBLY AND PARTS LIST ) 1-1. KDL-50R550A/556A 1-1-8. 90X30MM ( AL FOIL ) Align to two edges at panel concave PART No. DESCRIPTION MARK 4-472-645-01 90X30MM AL FOIL KDL-50R550A/556A, 60R520A/550A, 70R550A(CH)

LCD PANEL (JE695D3LB4N) 1-492-330-11 SWITCH UNIT 1-910-108-42 FFC CABLE 70 MB-IR 10P 1-895-376-21 MOUNTED PWB H 4-464-831-31 BEZEL (70FUGF) 4-451-601-01 BRACKET, VESA (70FUGF) 2-580-639-01 SCREW, +BVTP 4X12 TYPE IT-3 4-159-298-01 SCREW, +PSW M4X10 7-682-947-01 SCREW, +PSW M3X6 KDL-50R550A/556A, 60R520A/550A, 70R550A(CH)

(Top side: align to screw holes Other sides: Only have to cover the gap of panel) PART No. DESCRIPTION MARK (Top side: align to screw holes Other sides: Only have to cover the gap of 4-472-646-01 CONDUCTIVE TAPE L50XW30MM panel) KDL-50R550A/556A, 60R520A/550A, 70R550A(CH)

SEC 3. ( TROUBLE SHOOTING ) 3-1. 3-1. NO POWER No power Change Main board IF MAIN_POWER > 0 or DC_ALERT1 > 0 Enter Service Mode and check Change Main board Long AC off (> 15 min.) IF AUDIO_PROT > 0 Self diagnosis history and then Power On Change Panel...

TP4010 on the Main board >=11.4V FFC(LVDS) <=2V Replace the FFC(LVDS) Between FFC(LVDS) issue PSU and Panel Check PANEL_EN# at U4006_pin6 Change Main board on the Main board >=2V T-CON Change T-CON T-CON issue Change Panel KDL-50R550A/556A, 60R520A/550A, 70R550A(CH)

( TROUBLE SHOOTING ) 6 times blinking (Backlight Error) 6-time blinking <2.4V Fix the FFC(LVDS) Change Main board Check the FFC(LVDS) Between Check PSU_BL_EN# at connection PSU and Panel connection CN201_Pin-14 on the Main board >=2.4V <=0.7V Replace the FFC(LVDS) Between FFC(LVDS) issue PSU and Panel Change Main board...

( TROUBLE SHOOTING ) 3-3. NO PICTURE No picture Replace the Replace PSU to Panel Check the FFC(LVDS) PSU FFC(LVDS) Between Check the harness PSU to Press HOME Key. Menu Change Main board Harness to Panel connection PSU and Panel displayed? Panel connection Symptom improvement...

This feature working in conjunction with the 120Hz panel can distort the natural background blur in the picture somewhat in movies or film-based content so use with care. It"s great for sports programming though. Options within the setting are: Clear, Clear Plus, Standard, Smooth, Impulse. We recommend turning it off for movies, and using the Standard or Smooth setting for other programming.