1.8 18-bit color tft lcd display with microsd card breakout factory

The 1.8″ display has 128×160 color pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there’s no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic, which allows you to use the display with virtually any microcontroller. There’s also a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included.

Of course, we wouldn’t just leave you with a datasheet and a “good luck!” – here’s a link to the full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

You can download our Arduino library with examples from github. To install it, rename the downloaded and uncompressed library to ST7735 and place in the sketch folder/libraries folder. See our detailed tutorial for more info.

1.8 18-bit color tft lcd display with microsd card breakout factory

We guarantee your satisfaction on every product we sell with a full refund — and you won’t even need a receipt.* We want you to be satisfied with your Micro Center purchase. However, if you need help or need to return an item, we’re here for you!

*If you are a Micro Center Insider or if you have provided us with validated contact information (name, address, email address), you won’t even need your receipt.

1.8 18-bit color tft lcd display with microsd card breakout factory

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 1.8" display has 128x160 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.

Of course, Adafruit wouldn"t just leave you with a datasheet and a "good luck!" - they havewritten a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

1.8 18-bit color tft lcd display with microsd card breakout factory

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 1.8" display has 128x160 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

1.8 18-bit color tft lcd display with microsd card breakout factory

This 2.0”LCD display adopts T7789V driver chip and has 320*240 color pixels (RGB565). It uses IPS TFT display and can display 18-bit color(16-bit is basically used). The module performs excellently in displaying color bitmap. Besides, there is an onboard MicroSD card slot for displaying more pictures. There are two connection ways for this module: pin headers and GDI. Only one fpc cable is needed when working with main-cotnrollers with GDI, which greatly reduces the complexity of wiring.

The module has the advantages of high resolution, wide viewing angle and simple wiring, and can be used in many display applications: waveform monitor display, electronic gift box, electronic weather decorations, etc.

The product is a Breakout module. It adopts SPI communication and has onboard GDI interface, which reduces the complexity of wiring and can easily display the contents read from SD card.

This is an example of commonly-used icons. 1. We use GIMP2 to convert these icons into codes for better display. 2. We provide some icons for you, Click here to find more"Click here to find more").

1.8 18-bit color tft lcd display with microsd card breakout factory

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 1.8" display has 128x160 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

1.8 18-bit color tft lcd display with microsd card breakout factory

Spice up your Arduino project with a beautiful small display shield . This TFT display is small (1.8" diagonal) bright (4pcs white-LED chips) and colorful (18-bit 262,000 different shades)! 128x160 pixels with individual pixel control.

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you"ll have it running in under 10 minutes! Works best with any classic Arduino (UNO/Due/Mega 2560).

This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!

1.8 18-bit color tft lcd display with microsd card breakout factory

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 1.8" display has 128x160 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there"s no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code and a wiring tutorial. The code is written for Arduino but can be easily ported to your favorite microcontroller!

1.8 18-bit color tft lcd display with microsd card breakout factory

The PlayStation PortablePSP) is a handheld game console developed and marketed by Sony Computer Entertainment. It was first released in Japan on December 12, 2004, in North America on March 24, 2005, and in PAL regions on September 1, 2005, and is the first handheld installment in the PlayStation line of consoles. As a seventh generation console, the PSP competed with the Nintendo DS.

Development of the PSP was announced during E3 2003, and the console was unveiled at a Sony press conference on May 11, 2004. The system was the most powerful portable console when it was introduced, and was the first real competitor of Nintendo"s handheld consoles after many challengers such as Nokia"s N-Gage had failed. The PSP"s advanced graphics capabilities made it a popular mobile entertainment device, which could connect to the PlayStation 2 and PlayStation 3, any computer with a USB interface, other PSP systems, and the Internet. The PSP also had a vast array of multimedia features such as video playback, audio playback, and has been considered a portable media player as well.Universal Media Disc (UMD)—as its primary storage medium; both games and movies have been released on the format.

The PSP was received positively by critics, and sold over 80 million units during its ten-year lifetime. Several models of the console were released, before the PSP line was succeeded by the PlayStation Vita, released in Japan in 2011 and worldwide a year later. The Vita has backward compatibility with PSP games that were released on the PlayStation Network through the PlayStation Store, which became the main method of purchasing PSP games after Sony shut down access to the store from the PSP on July 2, 2021. Hardware shipments of the PSP ended worldwide in 2014; production of UMDs ended when the last Japanese factory producing them closed in late 2016.

In the 1990s, Nintendo had dominated the handheld market since launching its Game Boy in 1989, experiencing close competition only from Bandai"s WonderSwan (1999–2003) in Japan and Sega"s Game Gear (1990-2001).PocketStation in Japan as its first foray into the handheld gaming market.IDC analyst in 2004, the PSP was the "first legitimate competitor to Nintendo"s dominance in the handheld market".

The first concept images of the PSP appeared at a Sony corporate strategy meeting in November 2003, and featured a model with flat buttons and no analog joystick.Konami"s Studio Liverpool"s

A PSP-1000: the shoulder buttons are on top, the directional pad on the left with the analog "nub" directly below it, the PlayStation face buttons on the right and a row of secondary buttons below the screen.

The serial port was modified to accommodate a new video-out feature, making it incompatible with older PSP remote controls. On the PSP-2000, games only output to external monitors and televisions in progressive scan mode. Non-game video outputs work in either progressive or interlaced mode. USB charging was introduced and the D-Pad was raised in response to complaints of poor performance

Other changes include improved WLAN modules and micro-controller, and a thinner,LCD screen. To improve the poor loading times of UMD games on the original PSP,RAM and Flash ROM) was doubled from 32 MB to 64 MB, part of which now acting as a cache, also improving the web browser"s performance.

In comparison with the PSP-2000, the 3000, marketed in PAL areas as "PSP Slim & Lite" or "PSP Brite", has an improved LCD screenpixel response time, new sub-pixel structure, and anti-reflective technology to reduce outdoor glare. The disc tray, logos, and buttons were all redesigned, and a microphone was added. Games could now be output in either component or composite video using the video-out cable.

The PSP Go features 802.11bcomposite or component AV cable. As with previous models, Sony also offers a cradle (PSP-N340)Bluetooth connectivity,Sixaxis or DualShock 3 controller. The use of the cradle with the controller allow players to use the PSP Go as a portable device and as a console, although the output is not upscaled. PlayStation 1 games can be played in full screen using the AV/component cable

All downloadable PSP and PlayStation games available for older PSP models are compatible with the PSP Go. Sony confirmed that almost all UMD-based PSP games released after October 1, 2009, would be available to download

The first initial release of the Slims in North America on September 6, 2007, sold Daxter PSPs. Included with the bundle was an Ice Silver PSP with a Daxter UMD, the Family Guy : Freaking Sweet Collection, and a 1GB Memory Stick for usage.

While System Software updates can be used with consoles from any region,Adobe Flash support, additional codecs for various media, PlayStation 3 (PS3) connectivity, and patches against security exploits and the execution of homebrew programs.

The PSP Internet Browser is a version of the NetFront browser and came with the system via the 2.00 update.HTTP cookies, forms, CSS, and basic JavaScript.tabbed browsing and has a maximum of three tabs.

Starting with System Software version 3.90, the PSP-2000, 3000, and Go could use the Skype VoIP service. Due to hardware constraints it was not possible to use the service on the PSP-1000. The service allowed Skype calls to be made over Wi-Fi and – on the Go – over the Bluetooth modem. Users had to purchase Skype credit to make telephone calls.

Sony partnered with publishers such as Rebellion Developments, Disney, IDW Publishing, Insomnia Publications, iVerse, Marvel Comics, and Titan Books to release digitized comics on the PlayStation Store.

The PlayStation Store"s "Comic" section premiered in Japan on December 10, 2009, with licensed publishers ASCII Media Works, Enterbrain, Kadokawa, Kodansha, Shueisha, Shogakukan, Square-Enix, Softbank Creative (HQ Comics), Hakusensha, Bandai Visual, Fujimishobo, Futabasha, and Bunkasha.December 16, 2009, though the first issues of Aleister Arcane, November 20 through limited-time PlayStation Network redemption codes.

In Japanese market PSPs, an application called x-Radar Portable came preloaded starting with firmware version 6.35 (January 2010). This is a port of a map software for PCs and mobile phones called x-Radar, developed by PetaMap. x-Radar Portable gets the location of the PSP on a map and obtains information of places around the user. It determines the location through "PlaceEngine" technology, via wireless LAN spots.

Official accessories for the console include an AC adapter, car adapter, headset, headphones with remote control, extended-life 2200 mAh battery, battery charger, console carrying case, game carrying case, accessories pouch and cleaning cloth, and system pouch and wrist strap.1seg television tuner peripheral (model PSP-S310), designed specifically for the PSP-2000, was released in Japan on September 20, 2007.

By March 31, 2007, the PlayStation Portable had shipped 25.39 million units worldwide with 6.92 million in Asia, 9.58 million in North America, and 8.89 million Europe.in 2006 and 3.1 million in 2007, according to estimates by Electronic Arts.3.82 million units in the US, according to the NPD GroupEnterbrain.In 2008, the PSP sold 3,543,171 units in Japan, according to Enterbrain.

In the United States, the PSP had sold 10.47 million units by January 1, 2008, according to the NPD Group.March 24–30, 2008, the PSP nearly outsold all of the other game consoles combined, selling 129,986 units, some of which were bundled with Media Create.December 28, 2008, the PSP had sold 11,078,484 units in Japan, according to Enterbrain.12 million units as of May 6, 2008, according to SCE Europe.3.2 million units as of January 3, 2009, according to GfK Chart-Track.

Later in 2006, news of a billboard advertisement released in the Netherlands depicting a white woman holding a black woman by the jaw, saying "PlayStation Portable White is coming", spread. Two similar advertisements existed; one showed the two women facing each other on equal footing in fighting stances, the other showed the black woman in a dominant position on top of the white woman. Sony"s stated purpose was to contrast the white and black versions of the PSP but the advertisements were interpreted as being racially charged. These advertisements were never released in the rest of the world and were withdrawn from the Netherlands after the controversy.

Hayward, Andrew (June 22, 2007). "PSP Brought up to Speed with 3.50 firmware". 1UP. Archived from the original on September 27, 2007. Retrieved March 17, 2008.

""Slimmer and Lighter" New PSP (PlayStation Portable) Comes In Six Color Variations To The Japanese Market" (Press release). Sony Computer Entertainment. July 17, 2007. Archived from the original on October 12, 2007. Retrieved September 22, 2007.