4.3 inch tft display free sample

Main business are: large size (10.1-65 inch) projection capacitor screen production and sales, all fit / optical binding (3.5-72 inch) OEM production and large-size fit device design, production and sales of three Large business scope.

As digital signage supplier committed to digital signage solutions,and founded in 2004. We are major in produce Digital signage player and Digital signage displays,to match the requirement of our customers in the human-computer interface applications,advertising display and customer customized display equipment;

FocusLCDs.com sent me a free sample of a 4x3” TFT LCD (P/N: E43RG34827LW2M300-R) to try out. This is a color active matrix TFT (Thin Film Transistor) LCD (liquid crystal display) that uses amorphous silicon TFT as a switching device. This model is composed of a Transmissive type TFT-LCD Panel, driver circuit, backlight unit. The resolution of a 4.3” TFT-LCD contains 480x272 pixels, and can display up to 16.7M colors.

For this project, you would need the RA8875 driver board (available at AdaFruit for US$35) to interface the TFT display to the Arduino. It comes with a header which you can solder on as needed.

FocusLCDs.com sent me a free sample of a 4x3” TFT LCD (P/N: E43RG34827LW2M300-R) to try out. This is a color active matrix TFT (Thin Film Transistor) LCD (liquid crystal display) that uses amorphous silicon TFT as a switching device. This model is composed of a Transmissive type TFT-LCD Panel, driver circuit, backlight unit. The resolution of a 4.3” TFT-LCD contains 480x272 pixels, and can display up to 16.7M colors.

For this project, you would need the RA8875 driver board (available at AdaFruit for US$35) to interface the TFT display to the Arduino. It comes with a header which you can solder on as needed.

TFT Interface: 3 SPI and 16/18/24BIT RGB, WHITE LED backlight, IPS, Wide temp, Transmissive, Capacitive Touch Screen, CTP Interface: I2C, 450 NITS, RoHS Compliant

The Capacitive touch panel is activated with anything containing an inductive load such as a finger or stylus. It allows for multi-touch options. When using the capacitive touch screen, the display needs a separate controller to interface with the touch panel. The display for capacitive touch is brighter since the touch panel is transparent.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

If none of these part numbers meet your requirements in terms of brightness, interface, or connection method, please email us at info@orientdisplay.com.

About my brand new Color TFT 4.3" (Measured diagonally) monitor, I received it Monday evening, at a little after 5 pm. I had been told to expect it between the 14th, and, the 16th, so the early arrival time was great. Thanx. The LCD monitor arrived in perfect (visibly) condition. Again, thanx. The first thing that I did was to disconnect my 7" LCD mirror mount video (yellow), and, power (red and, black), wires, hooked up to my cigar lighter plug-in cabling. I then, plugged the power cord, from the cigar lighter, into the power harness, from the 4.3" LCD monitor, and, then, plugged in the yellow (video) plug, from my backup camera, cable array, located behind my license plate-mounted, camera. As soon as I tried the new LCD monitor, it did not work??? My 7" mirror-mount LCD, had been working perfect, from day one, "until," I disconnected the power cord, from it, to the cigar lighter, power cord, so that I could hook up the new, 4.3" monitor. Now, neither monitor works; the almost 3 week old mirror-mounted LCD monitor, that had been working perfectly, or, the newly-arrived, 4.3" LCD monitor, that I had bought, to replace the mirror mount, because it was just a little too large, for my dash, where I had had it mounted. So, tomorrow morning, I will attack the problem, with my multitester (meter), and, somewhat-limited knowledge, of troubleshooting these type systems, and, see if I can figure out, where the problem lies. I know! Why didn"t I leave well enough alone, when I had the mirror-mount LCD monitor working beautifully? I guess, because, I"m a perfectionist, and, I really didn"t want that "very large," mirror-mount monitor, taking up so much space, on the dash of my pickup truck. Size-wise, the new 4.3" LCD monitor is perfect, for the dash of my pickup truck. I only have to figure out now, why "both monitors," do not work now??? I may have blown a fuse, in the truck"s fuse box? That is where I plan to begin my troubleshooting, tomorrow morning (checking backup light power, and, related fuses, etc.! Wish me luck. I will get back with everyone, here, as soon as I figure out, what I did wrong, and, what I had to do, to fix the problem. Talk to ya"ll later..... p.s. I rated this new monitor, only 1 star, primarily, because, it isn"t working, however, I believe, it"s not working, because of something I did wrong, while splicing the new 4.3" power cord, into the cigar lighter, adapter power plug. Once I fix this power problem, (which I believe, that I will solve), then, I will change my rating, of the 4.3" monitor, to at least 4 stars, and, more than likely, 5 stars. "Toodle-ooh," for now, folks..... (The trials, and, tribulations, of a "shade-tree," automotive electronics technician/electrician???) (Smile!)

LATE NOTE: I got up early, Tuesday morning, (today), and, checked my cigar lighter adapter plug-in wiring, and, the first two adapters were messed up, but, the third power adapter, worked, as they say, "like a charm," and, when I finished hooking up the new 4.3" Color TFT LCD monitor to it, and, plugging it into the cigar lighter hole, all I needed to do was turn the ignition key, to the ACC2, position, shift into reverse, and, the monitor "came alive," with a"super nice," image of the bushes, behind my pickup truck, and, the sidewalk, between, the bushes in front of our home, a couple of feet, closer, to the back, of my truck"s rear bumper. The only thing that did not work with this new monitor, is the small, remote control, that came with my 3-week old, 7" mirror mounted LCD, that I have retired, for the time being. I velcroed the base of this new, LCD monitor, to the top, center, of my dash, and, even though, it is very tight, and, stable, I still plan to drill a couple of small holes, thru the base of the holder, and, screw it down, with a screw on each side of the monitor holder"s pedestal base, to ensure that it remains where I mounted it. By the way, I changed my rating, of this brand new, 4.3" monitor to 5 stars, from my original rating of 1 star, and, I am now, one very happy, completely satisfied camper..... p.s. This new monitor has, brightness, contrast, color, and, two screen size, adjustments, (wide screen, and, narrow screen), but, no tint, adjustment, which, for the price that I paid, for this monitor, is "fine, and, dandy," with me. Once again, I want to thank ya"ll. I am now, a happy camper, once more, with a monitor, that, although smaller, than the 7" once that I bought originally, is still large, and, clear enough, and, gets the job done, in fine fashion, and, it doesn"t block, nearly as much, of the windshield, like the 7" monitor did, that was mounted, in the same dash location, as this 4.3" Color TFT Monitor is mounted now.....

Victronix is one of the leading manufacturers and suppliers of rohs 10.1inch ctp android i2c pc touch for ultra book. With a professional factory and strict quality control system, we can assure you the high quality of our rohs 10.1inch ctp android i2c pc touch for ultra book. Please feel free to buy low price and customized bulk products with us. We can offer you quotation and free sample if necessary.

Victronix is one of the leading manufacturers and suppliers of rohs 4.3inch 480*272 tft lcd with rtp for smart home and monitor. With a professional factory and strict quality control system, we can assure you the high quality of our rohs 4.3inch 480*272 tft lcd with rtp for smart home and monitor. Please feel free to buy low price and customized bulk products with us. We can offer you quotation and free sample if necessary.

This LCD is a high resolution 800X480 IPS TFT display. The IPS technology delivers exceptional image quality with superior color representation and contrast ratio at any angle. This 24-bit true color Liquid Crystal Display is RoHS compliant and does not include a touch panel.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.

※Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

Impact: ER-TFT043-7 is the same with ER-TFT043A1-7 in mechanical dimension and electrical spec in our testing.As old customer,we recommend you test samples before mass order.

ER-TFT043A1-7 is 4.3 inch IPS TFT LCD 800x480 dots display, with driver IC ST7262E43 and optional capacitive touch panel or resistive touch panel,superior display quality,full view angle and easily controlled by MCU such as PIC, AVR, ARDUINO,ARM and Raspberry portable or handheld device.PI.

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 4.3"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno and 8051 Microcontroller Development Board&Kit.