adafruit tft display raspberry pi pricelist

TheAdafruit Mini PiTFT - 135x240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full color 240x135 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so its very fast, and leaves plenty of pins remaining available for buttons, LEDs, sensors, etc. It"s also nice and compact so it will fit into any case.

This display is super small, only about 1.14" diagonal, but since it is an IPS display, its very readable with high contrast and visibility. There was a little space on the top so Adafruit give you two tactile buttons on GPIO pins so you can create a simple user interface. On the bottom there is a Qwiic/STEMMA QT connector for I2C sensors and device so you can plug and play any STEMMA QT devices.

Using the display is very easy, Adafruit have a kernel driver and Python library for the ST7789 chipset. You can set it up as a console output so you can have text and user interface through the Raspberry Pi OS or you draw images, text, whatever you like, using the Python imaging library. Tests showed ~15 FPS update rates so you can do animations or simple video.

Comes completely pre-assembled and tested so you don"t need to do anything but plug it in and install our Python code!Works with any Raspberry Pi computer.

The Adafruit Mini PiTFT – 135×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full-color 240×135 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so it’s very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case.

This display is super small, only about 1.14″ diagonal, but since it is an IPS display, its very readable with high contrast and visibility. We had a little space on the top so we give you two tactile buttons on GPIO pins so you can create a simple user interface. On the bottom, we have a Qwiic/STEMMA QT connector for I2C sensors and devices so you can plug and play any of Adafruit STEMMA QT devices or Sparkfun Qwiic devices.

Using the display is very easy, Adafruit has a kernel driver and Python library for the ST7789 chipset. You can set it up as a console output so you can have text and user interface through the Raspberry Pi OS or you draw images, text, whatever you like, using the Python imaging library. Our tests showed ~15 FPS update rates so you can do animations or simple video.

Comes completely pre-assembled and tested so you don’t need to do anything but plug it in and install our Python code!Works with any Raspberry Pi computer.

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

This updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A+, B+, and Pi 4!(Any Pi with a 2x20 connector)Not for use with an old Pi 1 with 2x13 connectorIf you"d like to use a 2.8" display with the original Pi A or Pi B, check out the Model B version. This one also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath.Now that it"s the same outline as a Pi Zero/3/2/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure baseandcan use our faceplate for a compact touchscreen Pi

The display and touchscreen uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there"s 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.

Raspberry Pi computer and enclosure not included!As of July 27th, 2015 this display comes fully assembled and includes 4 tactile switches soldered on.

This display for the Raspberry Pi features 2.4" with 320x240 16-bit color pixels and a resistive touch overlay. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

This design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there"s 5 spots for optional slim tactile switches wired to five GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

We have a right-angle 26-pin connector off to the side. You can connect a classic 26-pin Raspberry Pi GPIO cable in order to access the rest of the GPIO through a Cobbler, etc.

Each order ships with an assembled HAT with 2.4" TFT display with resistive touchscreen and a 2x20 female socket header. Some light soldering is required to attach the header but it is easy work for anyone with a soldering iron & solder.Alternatively, you can use a stacking type header instead if you"d like to plug a 2x20 GPIO cable on top

The Adafruit Mini PiTFT - 1.3" 240x240 Color TFT Add-on for Raspberry Piis your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full color 240x240 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It"s also nice and compact so it will fit into any case.

This display is super small, only about 1.3" diagonal, but since it is an IPS display, it"s very readable with high contrast and visibility. We had a little space on the top-left so we give you two tactile buttons on GPIO pins so you can create a simple user interface. On the bottom we have a Qwiic/STEMMA QT connector for I2C sensors and device so you can plug and play any of our STEMMA QT devices.

Using the display is very easy, we have a kernel driver and Python library for the ST7789 chipset. You can set it up as a console output so you can have text and user interface through the Raspberry Pi OS or you draw images, text, whatever you like, using the Python imaging library. Our tests showed ~15 FPS update rates so you can do animations or simple video.

Comes completely pre-assembled and tested so you don"t need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer.

The Adafruit Mini PiTFT - 1.3" 240x240 Color TFT Add-on for Raspberry Piis your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full color 240x240 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It"s also nice and compact so it will fit into any case.

This display is super small, only about 1.3" diagonal, but since it is an IPS display, it"s very readable with high contrast and visibility. We had a little space on the top-left so we give you two tactile buttons on GPIO pins so you can create a simple user interface. On the bottom we have a Qwiic/STEMMA QT connector for I2C sensors and device so you can plug and play any of our STEMMA QT devices.

Using the display is very easy, we have a kernel driver and Python library for the ST7789 chipset. You can set it up as a console output so you can have text and user interface through the Raspberry Pi OS or you draw images, text, whatever you like, using the Python imaging library. Our tests showed ~15 FPS update rates so you can do animations or simple video.

Comes completely pre-assembled and tested so you don"t need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer.