lcd screen bleed fix manufacturer

Backlight bleed is characterized by light leaking around the edges or corners of an LCD. This is due to the way these displays work; they use a light behind the panel that faces the display.

Backlight bleeding is simply some of the backlight leaking through. There are no ways to completely remove this, though it can be reduced in some scenarios. If you have too much backlight bleed, you might be able to RMA your display.

Your LED LCD, whether it’s a TV or a monitor, uses a LED backlight to create the image through the liquid crystal display panel. Some of that light might not get entirely blocked around the display’s bezels, which results in backlight bleeding.

Generally, some minor backlight bleeding is expected due to the nature of the display technology, and it is entirely tolerable given you won’t even notice it most of the time.

However, sometimes the backlight bleeding can be rather eye-searing and, in this case, you may be able to return your display and get a new model or a refund depending on the manufacturer’s RMA policy.

The flashlighting issue, as the name suggests, looks as if someone’s pointing a flashlight at the screen, thus creating bright patches at the corners of the screen.

In short, if you are experiencing too much backlight bleeding, you should try to RMA your display. In case the display manufacturer won’t accept it, you will have to get a new monitor/TV, preferably with an OLED panel that doesn’t suffer from these issues.

In case the backlight bleeding doesn’t bother you in real use, it’s not worth returning or replacing the display as another unit might have even worse backlight bleeding or other defects, such as dead or stuck pixels.

Unlike backlight bleeding, the intensity of IPS glow can be reduced by changing the angle or the distance you’re looking at the screen or by decreasing screen brightness and adding ambient lighting.

Both LCD and LED displays use backlighting, either via liquid crystals or light-emitting diodes. However, emissive OLED and MicroLED displays don"t use backlighting, so you won"t experience backlight bleed with these two display types.

Backlight bleeding occurs when the layers which make up the monitor or TV screen become misaligned. When this happens, pressure forms inside the display, which changes the alignment of the components that emit light. This misalignment directs light in the wrong direction and leads to backlight bleeding.

This issue is more likely to occur in less expensive displays where the quality of the screen and those individual layers aren"t as robust as higher-priced displays.

Clean the screen well with a microfiber cloth. This process is the same whether you"re cleaning a Mac or Windows monitor or a large screen TV. Ideally, you"ll want to use distilled water and vinegar.

Even if cleaning the screen doesn"t work immediately, give it at least 24 hours to dry and settle before turning on the screen and testing to see if the backlight feed resolves.

Check if your TV or monitor is still under warranty. If your laptop is having this issue, check your laptop warranty. If it is, submit a repair request, and the manufacturer should be able to fix the problem or send you a replacement display.

If you"re stuck with a monitor or TV that"s not under warranty, another option is to turn down the brightness. Adjust the brightness down on your laptop or your TV so that it"s just low enough, so the backlight bleed issue fades away. This step isn"t an ideal solution, but it allows you to keep using the display without the problem.

Another quick fix is applying electrical tape to the very edge of the display. Doing this will reattach loose sections of the screen edge, which typically leads to backlight escaping from the edges of the screen.

Room lighting always has an impact on your TV viewing or PC gaming. Watching the display in a dark room can make the issue appear worse, so while this doesn"t count as a "fix," you can try to brighten the lights in the room, and you may not even notice the problem.

Use a screwdriver to loosen the screws on the back of the monitor or TV frame. You won"t have to open the display like you would if you were trying to repair it. Just loosen the screws and slightly twist the screen. When the frame screws are too tight, it can cause backlight bleed.

If the backlight bleed issue is too severe for any of the more straightforward fixes and there"s no warranty, you may need to resort to buying a new TV or a new laptop.

It depends on how much you"re willing to tolerate. Some bleed is normal when the screen is at full brightness, but it may be less noticeable if you dim the screen.

Sometimes. All LCD screens have some backlight bleed at first, but as the pressure around the panel weakens with use, it will become less noticeable. If you"ve had your device for a while, the backlight bleed probably isn"t going away.

personally i would give it a go if it was my only option and it was a cheap dell. but its not its a high end asus and the hardware inside isnt worth voiding the warranty for a fix that may or maynot work.

there are options though... you could replace the screen with that from another manufacturer if you can find 1 that has the same dimensions and rez and power requirements.

The last thing you want on your monitor is light leaking around its edges. This is referred to as backlight bleeding. The backlight bleed test will help you determine if your monitor has this defect or no.

In many cases, you will not notice that your screen is suffering from too much light bleed until you use it in a dark room. Continue reading to learn more about a bleed test such as this, what causes this defect and how to prevent it.

Backlight bleeding is a screen defect that is likely to occur in new LCD displays that utilize a light source from the panel. The LCD panel itself is supposed to block out the excess backlight that is not needed when displaying an image/video.

Unfortunately, not all the light is blocked by the panel and as a result, light leaks around the edges of the frame. This is known as backlight bleeding and it can affect image/video clarity and spoil your gaming experience.

This is a type of backlight bleeding that is found on the corners of your monitor. In a serious case, the edges of the screen receive much more lighting whereas the center remains dimmer than on a normal monitor.

This is when there’re irregular patches of light still visible with a full black image screen. This type of backlight bleeding is more prevalent in larger displays than small ones.

The most common type of backlight bleed occurs along the edges of the screen. If you suspect your flat panel display suffers from possible backlight bleeding, you need to first make sure that you’re not mistaking it for an (In-Plane Switching) IPS glow.

If you’re not sure whether it’s a backlight bleed or IPS glow experience, it"s time for you to run a backlight bleed test. To perform the bleed test, follow these steps;

1. Turn off the room lights before you begin the bleed test. A dark room and a black screen/monitor make it easy to see if it is an IPS glow or backlight bleed.

3. Open a pitch-black image or black screen and search whether there are spots of light being emitted around the edges of the monitor or at the corners. If you don’t notice any backlight bleed issue or IPS glow, then your monitor is good.

There is also a website, lightbleedtest that you can use to bleed test this defect. Apart from a bleed test on your monitors, you can use them for your laptops and mobile phones.

This is a glow effect that appears along with the corners of an IPS screen especially when viewing dark/black content. It is the downside of IPS technologies that have a backlighting system to display images/video.

IPS displays are a type of LCD panel. IPS (In-Plane Switching) refers to the way molecules inside the liquid crystal display are positioned or oriented. IPS monitors are designed to widen the viewing angle without the image changing in color accuracy or contrast.

Burn-in means that a certain image that"s been on the screen for a long time is "burned in". Because the screen has displayed the same image for a long time, that image remains on the screen constantly, no matter what you"re viewing on your screen. The best way to prevent this is to turn off your monitor when you"re not using it.

Depending on how long the image has stood still, burn-in can be remedied or reduced in some cases. You can do this by turning the screen off for at least 48 hours and then showing a white screen for a few days, for example with an image or screen saver. Set your background lighting low to save the LEDs. It"s often worth trying, but if the damage is too bad, this trick won"t work anymore either.

The above reasons cause pressure inside the LCD resulting in the disruption of liquid crystal alignments inside the panel. This damages the panel which causes light leaking in some areas much more than other parts.

The last thing you want to see after unpacking and powering your gaming monitor is a backlight bleed. Luckily for you, backlight bleeding can be treated in most cases. So, if light has started to creep through your monitor recently, do the following;Don’t try to fix it yourself first but rather get your monitor replaced. In case, it"s still covered by the warranty. Some companies will not accept it if it’s tampered with or the seal is broken.

2. Next, slightly loosen the screws at the back of your display. This should stop the problem. Turn on the display to see whether the backlight bleeding has stopped.

3. If not, switch it off again and then take the microfiber cloth and gently rub the areas where the backlight bleeding appears; in a circular pattern. You should only apply moderate pressure for the screen to warp slightly.

Unfortunately, massaging your monitor isn’t guaranteed to fix the screen 100% no matter how often you do it. In this case, the best thing to do is to make the backlight bleeding much more manageable.

If your monitor has a backlight bleed, one of the ways to remedy is to adjust the display brightness to around 30% to reduce the intensity of the bleed. Right away, your problem will be solved.

Some cases of backlight bleed are serious; if the warranty is still valid, take it back for replacement. Or, get a new quality display model with higher standards or zero/less backlight bleed.

To ensure you don’t get a monitor with severe backlight bleed, buy the best one with minimal or less backlight bleeding. Make sure to read user reviews and see if other people are complaining about the excessive glow on the model that you are interested in before you purchase it.

Be careful with your monitor. Avoid situations that will cause harm on your display as this can damage or put a strain on its frame leading to backlight bleeding.

Check your display to ensure the screen is properly seating in its frame. If not, fix it by twisting it back into place and then check if the backlight bleeding problem has stopped.

To check for backlight bleed (commonly referred to as light bleed) on your display, play a full screen video or open a pitch-black image. Backlight bleed is the light that appears around the edges of the screen or in the corners.

Backlight bleed is a common issue with LCD displays, and unfortunately, there"s not much that can be done to fix it. The best solution is usually to try and adjust the viewing angle of the screen so that the bleed is less noticeable.

Backlight bleed is not always a defect, but it can be an indication of a defect. If there is too much light bleed from the backlight, it can cause a washed-out image on the screen. This is usually caused by a faulty or loose connection between the backlight and the screen.

ALL LED and LCD televisions, regardless of price or manufacturer, suffer from varying degrees of backlight bleed. Unfortunately, because the manufacturing process for these panels is significantly cheaper, it is extremely difficult to find a superior plasma television these days, as almost no one mass produces them.

Backlight bleeding occurs when light from the backlight of your monitor escapes through the screen"s edges. The light that was supposed to shine through the black screen now escapes along the edges, creating an uneven lighting pattern on the screen.

Light leak or backlight bleeding is often noticeable around the edges or the sides of a screen. Especially while it is displaying a dark background or is in a dark environment.

NOTE: This article provides information about common issues that are seen on LCD screens. It is not something specific to a particular Dell computer but is something that can be seen on any LCD screen by any manufacturer.

Before proceeding to the troubleshooting section of this article, you must identify the issue that you are experiencing. Identify the light leak or light bleed issue using the examples below and ensure that this is the correct article for you.

I"ve just imported my LG UM95-P from Amazon Spain it"s a beautiful display but it has some minor but very distracting backlight bleed I have less than 30 days to decide if I want to keep it:

The picture bellow exaggerate the perceived backlight bleed under normal viewing conditions only the bottom left is visible and only when the screen is black:

Overall I"m very happy with my LG and by comparison to many LG UM95-P owners I have very little bleed but the effect when viewing a dark image a film or game (Amnesia: The Dark Descent) being a prime example is like the glow of a small campfire to the left of my peripheral vision which breaks the sense of immersion.

As these screens are well known for this issue a replacement is unlightly to solve the problem, I have attempted to fix the problem myself using Credit Card Light Bleed Fix as seen in this video:

Although it did not fix the problem nether did it worsen it pushing at the bottom left of the screen temporarily removes the light bleed, I even went so far as to try a suction cup which yet again had no effect :(

I recently did a screen replacement and customer came back a few days later saying "there"s black marks on my screen" upon inspection I discovered the LCD was cracked and bleeding, but there was no damage to the glass, he agreed it was cracked and left without arguing, though said "I don"t know how I couldve done that It"s been in my pocket the whole time" now weeks later I just got a call from him saying he consulted with "professionals" and they assured him it was definitely a defective screen... Any opinions on this? If that"s the likely answer then I"ll be happy to give him a new screen (though I doubt my supplier will feel the same way) but if there"s a way that he could have broken the lcd underneath without breaking the glass, like from pressure putting it in an otterbox or keys pushing against it in his pocket, then I"m at a loss as to what to say/do. What would you guys say or do?

In this post, I would resolve and explain the backlight bleed you see on your monitor in-depth and would discuss how you can fix the backlight bleed issue.

Backlight bleed is a problem that can occur when the light from an LCD or LED monitor shines behind the display and leaks out into the surrounding area.

Backlight bleed is a common issue with LCD screens where light leaks through the edges of the screen and creates a glow around the edges. This can be distracting and affect your viewing experience. Backlight bleed is most noticeable in dark scenes or areas of the screen with a lot of blacks.

Backlight bleeding occurs when the LCD backlight leaks around the edges of the screen and appears with some patches of light through the other parts that are still dark.

During the identification, you may doubt if the problem is backlight bleed or IPS glow. Backlight Bleed is more an issue whereas if it is Backlight Glow, it is instead a limitation of the LCDs and it is common to notice that.

Backlight bleeding is a defect that’s extremely difficult to avoid, but with the right settings, you can reduce the amount of backlight bleeding on your screen.

If you are just using a new monitor, then it is awesome that you can issue a replacement or a warranty claim if you feel the backlight bleeding is too much.

If you notice a bright streak or glowing coming from behind your TV, it’s likely suffering from backlight bleed problems that need to be fixed before they worsen.

It is more of an annoyance than a problem that will affect the quality of your display. It can cause some streaking, but it’s not permanent and doesn’t have any effect on how well you see what’s on the screen.

IPS Glow is an effect that can be observed only on an IPS screen. When the monitor is viewed in a dark room, the image on these displays appears to have a white glow around the edges.

Unlike the backlight bleeding issue, the IPS glow is for the IPS type of screen technology. In this case, if you reduce the screen brightness and add some ambient lighting you can easily reduce the IPS glow.

Sony states that this is a common phenomenon on all LCD TVs.Backlight Bleed is when some screen areas are lighter than others due to spillover from a backlight or uneven backlighting.

Perhaps you still want to get an LED TV due to the lower price point. In that case, your best bet is to read reviews to determine if others are experiencing backlight bleed issues with a particular TV model.

When light bounces off any surface around the edges of the screen, it can result in Flashlighting, or extra light at the edges or corners, making the lighting of the LCD panel uneven.

Clouding occurs when layers of the screen become uneven due to misalignment, damage, pressure, or temperature changes. The misalignment results in the light not being evenly distributed.Flashlighting is the type of backlight bleed experienced at the corners or edges of a screen.

Backlight bleed goes by various names, including light leakage, screen bleed, light bleed, clouding, blooming, mura, banding, and un-uniform brightness.

Excessive LED backlight bleed can be caused by the following:Temperature changes result in materials expanding or contracting, including the LCD panel or frame.

Temperature changes may result in some components moving or warping slightly. Backlight bleeding could be reduced after either cooling down or warming up, depending on how the TV was designed.

Some possible ways to fix LED backlight bleed or make it less noticeable include:Give it time: Some new TVs experience an increase in backlight bleeding which can slowly disappear after a few weeks or months.

Reduce screen brightness: Reducing brightness can reduce the backlight intensity, which may cause the backlight bleeding to be less noticeable or even impact the screen"s temperature.

Enable local dimming or LED dynamic control if your TV supports it: Reduce backlight bleeding for darker scenes by dimming darker portions of the scene.

Use a microfiber cloth to gently rub the portion of the screen where the backlight bleeding is prominent: This may help with clouding by evening out an uneven LCD panel.

Take apart the TV and apply electrical tape around the edges of the LCD: While likely to void your warranty, this could reduce light escaping and reflecting around the edges of the screen.

If the backlight bleed is not too distracting, there"s nothing to worry about. Backlight bleed typically will not get worse over time on its own. However, frequently moving a TV around or improper handling could result in bending the tv frame or components, resulting in backlight bleed.

Some manufacturers do not allow returns based on general backlight bleeding, which is typical of LED backlighting. For example, Sony considers bleeding that is only visible on "black images and in a dark or very dim room" to be considered within specification. Are you experiencing backlight bleeding in bright scenes and a well-lit room? If so, you may be able to return the TV to your manufacturer for a replacement.

To determine the maximum amount of backlight bleed possible with a TV, you can: increase screen brightness, turn off auto-brightness, view the TV in a dark room, and disable local dimming. These are not settings for optimal viewing but can be used for testing the worst-case scenario.

Many of our monitors and TVs suffer from an affliction. It is a scourge that deforms our beautiful displays and breaks the immersion into our lovingly rendered games. It has ruined many a pristine LCD. It might have already affected your friends, neighbors, and loved ones. It’s called backlight bleed, and it could happen to you.

What is screen bleeding? If you’ve ever seen a monitor or a TV with white light escaping from around the edges of the display, you’ve already witnessed it firsthand.

Your display has a panel consisting of pixels at the front, each of which changes color to create images. These pixels are illuminated by something called a “backlight,” which is behind the panel. Backlight bleed occurs when the seal between that panel and the frame of your display allows some white light to “bleed” through. This inconsistency has also been called “screen bleeding” or “flashlighting.”

There’s another form of backlight bleed called “clouding” where the backlight can be seen more brightly through the panel in certain areas, giving the screen a cloudy and uneven look. Clouding can occur when the panel has had pressure exerted on it for a prolonged period of time.

One thing to keep in mind is that you might be seeing something that looks very similar to backlight bleed if you have an IPS panel, but this is actually a phenomenon called “IPS glow.” There are multiple kinds of LCD screens and IPS (In-Plane Switching) panels that often get a sort of glow in the corners of the screen when they are displaying dark images. It’s important to note that the steps listed in this article to help reduce backlight bleed will not help with IPS glow.

A small amount is reasonably common. You might not even notice it. Other times you might only see it when your screen is entirely black in the affected area. If it doesn’t bother you, then hey, keep on enjoying your display! If it does bother you, then it might be time to start thinking about potential solutions.

We all know that we aren’t supposed to touch our screens, but that isn’t just to keep our smudgy finger oils off. It’s also to keep the seal between your panel and the display frame tight. By mishandling or even simply jostling our displays, we risk loosening the panel at the edges and allowing light to escape.

That said, it doesn’t always come down to user error. Backlight bleed can start long before you take your display out of the box. The damage could have occurred while the display was shipped, stored, or the manufacturer may have never installed it correctly to begin with.

If you just bought your display and it comes with any amount of backlight bleeding out of the box, you should return it immediately. Any respectable retailer will offer a free return for significant issues out of the box. In the event they do not accept the return, look up the manufacturer and try to file for an RMA (Return Merchandise Authorization.) Keep in mind that attempting to fix your TV or monitor yourself may void an active warranty. Returning it and getting a new one is a much safer alternative.

Well, if your warranty is expired, the display can’t be returned, and the bleeding has progressed to the point where it’s become too distracting to ignore, then there may still be a way for you to fix your display.

Unplug the display again if this did not solve the issue. Next, take a microfiber cloth and gently rub the areas on the screen where you’ve seen the bleeding. Do this in a circular pattern. Apply just enough pressure that you see a slight warp on the screen. What you are attempting to do is massage the panel back into place.

If you’ve completed steps 5-7 several times with no success and are looking to take more invasive measures than there is one last thing that you can do. You can pin the panel down, sealing in the backlight by dismantling the display and applying electrical tape around the edges of the LCD. This method is the most likely to damage your display and should only be done after all other avenues have been exhausted.

Now go forth, armed with the knowledge and procedures to treat those who’ve been hurt by the horrid white rays of backlight bleed. Tell your friends that the dark days of playing Counter-Strike through a poorly sealed screen are finally over.

Key Takeaways:Backlight bleeding commonly affects LCD display (Liquid Crystal Display) monitors with a VA(Vertical Alignment), IPS(In-Plane Switching), or TN(Twisted Nematic).

Light leaking on your monitor edges is not only annoying but can also be distracting for gamers. Backlight bleeding is a monitor defect in modern monitors where the light source is shining through the screen edges. This defect is commonly caused when the backlight in a monitor is not completely sealed off due to poor quality control or manufacturer design issues.

Backlight bleeding commonly affects LCD display (liquid crystal display) monitors with a VA(Vertical Alignment), IPS(In-Plane Switching), or TN(Twisted Nematic). It’s not easy to spot a backlight bleed. A screen bleed is commonly visible in low light conditions, like using a monitor in a dark room.

Backlight bleeding is a display defect that commonly occurs in LCD screens that use a light source from a panel. This panel should ideally block excessive light that is not required when displaying a picture or video on the screen.

Sometimes, not all the light gets blocked by the panel, leaking out to the edges of the frame. This phenomenon is called backlight bleeding. Backlight bleeding can appear in the following ways:

This backlight bleed is visible on the edges of the monitor. In severe instances, the edges of the monitor get more light, while the center is dimmer.

Unlike your common backlight bleed or clouding, an IPS glow occurs in IPS monitors. An IPS glow manifests as a faint glow visible in certain angles, especially when watching dark content. Depending on the type of panel, the IPS glow is unavoidable but tolerable. The glow is visible in corners.

If you are unsure if you have a backlight bleed or IPS glow, you’ll need to perform a backlight bleed test. Fortunately, it’s a simple and straightforward process.First, ensure your monitor is in a dark room. Turn off the lights. A black monitor and darkroom make it easy to spot an IPS glow or backlight bleed.

Set up a black screen or open a black image and inspect where patches of light are visible around the edges or corners of the monitor. If you cannot spot any IPS glow or backlight bleeding issue, your monitor is fine.

If the backlight bleed is still visible, take a microfiber cloth, and in a circular motion, rub the areas where the bleed appears. Make sure you only apply as much pressure to see reflections on the screen warp slightly.

If you perform all the steps above and the backlight bleed persists, let your monitor sit for a day. If the bleed is still visible, repeat the above steps. The bleed should eventually fade away.

With advancements in visual technology, some potential issues can crop up from time to time. One of these issues is what enthusiasts might refer to as backlight bleed. Backlightbleed happens when light that is not needing for whatever you’re viewing is not blocked completely.

Some users may wonder if this bleeding effect goes away over time, or if can become even more problematic. We’ll get into the specifics of how backlight bleed works, and we’ll tell you how you might minimize or fix the issue as well.

When you’re viewing images or video on a modern liquid crystal display—one of the most common types of monitors for TV and computers today—you may notice that the entirety of the surface of the screen is backlit. This effect happens behind the major source of the monitor’s lighting itself.

Although the entire screen is lit up, it also has provisions for blocking out light that is not needed at a particular time or for certain imagery. However, sometimes this blocking does not happen as it normally should, and this is when the bleed occurs.

Some users may wonder if they should be concerned about backlight bleeding. In the technology world, the honest answer is often that it depends on several factors, and these factors can be different for everyone. However, let’s look at what backlight bleed is supposed to do. Later, we’ll get into how the bleed might affect performance for particular tasks.

If you want the absolute best, high-quality visuals with zero perceptible imperfections at all, you might be concerned about backlight bleeding. We should point out, though, that perception plays a key role here. Even if you are using a high-range LCD monitor, it is likely that you will deal with a tiny amount of backlight bleed in the course of your usage.

All that said, manufacturers do account for backlight bleed, and most of the good ones will do their best to reduce backlight bleed as much as they can when they test their products. Mostly, this should be sufficient for many viewing or gaming experiences.

Everyone is different, and you may apply your own standards to the acceptable level of backlight bleed you want to tolerate. As a good rule of thumb, you don’t need to worry that much about backlight bleed if it is not generally perceptible to your eye, or unless it is really affecting your experience.

If backlight bleed is a noticeable issue that is keeping you from enjoying your media fully, you may wonder if it can get better over time. For the purposes of our discussion, we will assume that users might wonder if backlight bleed might reduce itself on its own, with no input from them. The precise nature and causes of backlight bleeding can be complex. We can’t guarantee that all backlight bleeding will improve over time, but we’ll get to what you can do about that in another section.

What we can say is that there are cases where backlight bleed does seem to get better over time. This could be because of a variety of factors, but it is probably related to how much pressure is on the panel of the screen. If the backlight bleeding is a heavy issue when you first get your new monitor, you might notice that it is not such a big problem after a few days or weeks of use. For why this might be, the pressure on the monitor seems to make sense.

3. After some time, you may notice that the light from your monitor now has more even tones. This is one example where the backlight bleed could have improved, and that might be due to pressure lessening or evening out on the monitor itself.

Regardless, although there are several factors at play, it is true that backlight bleed can get better over time. It is good to keep in mind that this might not be the case with all monitors.

However, it is also true that if the backlight bleed is minimal, you may simply get used to it over time as you use the monitor. This is where a healthy dose of end user perception might come into play. Once a new monitor becomes familiar to you, small things that were imperfect might be easy for you to ignore as you enjoy your media. In this way, backlight bleed can get “better” as well.

We talked about how backlight bleed might lessen over time by itself. What can you do if backlight bleed is strong enough to be noticeable and doesn’t seem to be getting better after you give it some time?

There are things you might be able to do in order to mitigate the visibility of backlight bleed. We’ll touch on a couple of options in this section, but we should stress that a little bit of backlight bleed is in the nature of LCD technology, and there might be no way to reduce it to zero in particular monitors. Some users may need to exchange their monitors if the bleeding they cause is severe enough.

However, there are still fixes you can try in order to take care of backlight bleeding. One of the more common ways is to add more light-blocking materials to the monitor itself. While this can be effective, we should note that it is commonly used as a last resort, and it involves dismantling your monitor to add the materials.

If your monitor or screen is still under warranty, and if you really want to reduce severe backlight bleed, trying to exchange it for a different one should be your first effort. While the fix to eliminate the bleed can work, we stress that you should only do this at your own risk only, or if the monitor is no longer under warranty.

We’ve provided basic instructions on how you can dismantle your screen to apply more light-reducing materials. Before you try this, you can also go over the affected areas with a microfiber cloth in order to reduce clouding. Should you have exposed screws at the back of your screen, loosening them slightly might reduce the bleeding effect.

2. Remove the front bezel by separating the front of the monitor’s frame from its back. You may wish to lay down a soft, clean towel for when you flip the screen over to pull off the back part.

6. Your monitor should now be bare and ready for more materials. You can use dark black electrical tape as one easily obtained material that can block bleeding.

Whether backlight bleed affects performance in monitors is going to be up to individual user experiences. However, it is safe to say that only backlight bleed that is severe enough to be noticeable all the time and in conditions other than complete darkness might affect performance negatively. A bit of backlight bleed is common and accepted by many people who use monitors daily or care about specs.

Mostinstances of backlight bleed should not be noticeable enough to alter your viewing experience much. Even in conditions that are ripe for seeing the bleed more, it can depend on factors like the viewing angle to make any real difference. You should be fine even editing photos or playing games that go from very dark to very bright areas without noticing much bleed.

Current technology for monitors is amazing, but it can come with a few drawbacks. The inherent way that the screens are produced right now can lead to small visual effects like backlight bleed at the corners, or a general fogginess at the edges. However, while this effect is present, it is usually not noticeable. If it is noticeable, it may go away on its own over time, or you may get used to it and disregard it automatically. Should it be a bigger problem, there are a few fixes you could try, or you can attempt to swap it for an improved version of a similar monitor.