serial tft lcd 3.2 with touchscreen manufacturer

As the first in the world we do provide TFT displays with 3.2", 4.3" and 7", which are immediately running and do provide from the first minute the full functionality. These displays do require a single supply 5V= (EA eDIPTFT32: 5V= or 3.3V=) and an interface RS-232, I²C or SPI only.

Such as the touch key, bargraph, area, picture, animation, centered strings... are already built-in. You can therefore create the screen layout you want with just a few, easily understood commands. All the commands are based on coordinate specifications and can therefore be applied and moved to the nearest pixel.

Like all EA DIP modules, the EA eDIPTFT displays are simply inserted in the PCB and soldered in place. No screws, distance sleeves or cables are required, thus saves material cost and simplifies construction. This results in a saving of between 2 and 4 minutes per module during assembly!

For a standard screw mounting (e.g. together with the optional mounting bezel), the displays do come with 2 additional mounting clips for easy screw mounting.Communication via serial interface (RS-232, I²C, SPI)

Additionally to the well-proved versions with a resistive touch panel currently we do provide 2 displays with 4.3" and 7" alternatively equipped with a capacitive touch panel: EA eDIPTFT43-ATC (4.3") and EA eDIPTFT70-ATC (7").

The advantage is more transperency that leads for both sizes to again more brightness and a very contrasty display. The surface is made of glass which is hard profen against scratch, it is hygienic and resistant against all cleaning stuff. The design with its black frame grants your equipment a valuable, modern optic.

An essential detail with industrial applications ist the usability with and without hand gloves. Even when the display is put behind a 3mm glass plate it may be operated perfectly.Technology

With an extended standard temperature range of -20..+70 °C, rapid response times are guaranteed down to -20 °C. Even the essential temperature compensation is already built-in. The displays are designed for +5V single-supply operation (EA eDIPTFT32-A: 3.3~5V=).Getting started

The µLCD-32PTU is a compact Intelligent Display Module from 4D Systems packed with plenty of features, ready to become the GUI for your project, and capable of being an interface controller for a number of applications.

The µLCD-32PTU is a combination of a 3.2” (240x320) LCD Screen, audio amplifier and speaker, micro-SD card connector, Lithium Polymer (LiPo) battery support, along with a group of general purpose input/output pins (GPIO"s), including I2C and serial COMMS.

-LCD control IC ILI9341, touch panel controller XPT2046; Adopt industrial TFT LCD modules; High-grade gold-plated double yellow-module pin, better electrical properties; -Compatible with all hot Atom development boards, straight into the straight; -Application is fully open source; -Bottom-driven technical support LCD, a transaction, is a friend forever;

-3.2 inch, 240*320 resolution, TFT touch screen; -Display driver IC ILI9341, touch screen driver for XPT2046; 16bit-display interface parallel interface, support for 6800 and 8080 bus interface supports STM32 FSMC bus interface, crowding the screen faster; -Touch screen interface for the SPI interface, so that the line less, driving is simple; -Onboard-a large current LDO voltage regulator, 5V and 3.3V power supply; -Onboard PWM backlight control circuit to support IO control and PWM dimming control; -Modules with SD cards, digital photo frames and other experiments can be done; -Reserved SPI FLASH pad, you can extend the welded fonts chips; -Supports landscape and portrait displays, support split the screen display; -Support for 262,000-color RGB display and displayed good quality; -Graphic display of the screen controller with internal 172800 byte data storage; Punctuality Atom-interface compatible series of interface Development Board; Patch-machine production, stable and reliable hardware;

-Module design principle; -LCD controller data manual; -XPT2046 data sheet; -Module schematic diagram; -Module dimensions; -LCD package; MOD software-text; -Picture taking mode software; -C51 code wiring tutorial; -STM32 code wiring tutorial;

Description: The uLCD-32PT(GFX) is a compact and cost effective all in one ‘SMART” display module using the latest state of the art Active Matrix LCD (TFT) technology with an embedded PICASO-GFX2 graphics controller that delivers ‘stand-alone’ functionality to any project.

The PICASO-GFX2 belongs to a family of processors powered by a highly optimised soft core virtual engine, E.V.E. (Extensible Virtual Engine). EVE is a proprietary, high performance virtual processor with an extensive byte-code instruction set optimised to execute compiled 4DGL programs. 4DGL (4D Graphics Language) was specifically developed from ground up for the EVE engine core. It is a high level language which is

4DGL allows the developer to write applications in a high level syntax similar to popular languages such as BASIC, C and Pascal and run it directly on the PICASO-GFX2 processor embedded in the uLCD-32PT module. It allows the user to take complete control of all available resources on that hardware platform such as the Serial Ports, Graphics LCD Display, uSD memory card, I/O pins, etc. This eliminates the need for an external host controller/processor to drive the uLCD-32PT module via serial commands. It provides the user complete control over the hardware module allowing them to quickly develop powerful applications.