can i use isopropyl alcohol to clean lcd screen pricelist

Screens, especially touchscreens, collect a lot of dirt, grease and hair. This means that periodic cleaning is something we all have to and should do.

Now, plenty of people get away with wiping a smartphone screen against their t-shirt or pants or using a sleeve to clean a laptop display, but this is not the best way and can itself damage the display.

Do a quick search on the internet, and you"ll find that isopropyl alcohol is the weapon of choice in cleaning displays. This is true, but if used incorrectly, this chemical can also damage the display.

The big DON"T of using isopropyl alcohol is this -- don"t pour or even spray isopropyl alcohol on your display. If you put too much isopropyl alcohol on a screen, damage can occur in two ways:The isopropyl alcohol can seep between the layers of the display, completely ruining it and requiring the device to have a replacement screen fitted

Apple has, naturally, published detailed information on safely cleaning a whole range of products, from notebooks to tablets to smartphones. While this is aimed at Apple users, the information applies to other brands too.

This is an archived article and the information in the article may be outdated. Please look at the time stamp on the story to see when it was last updated.

It is pretty normal to pause or hesitate when it comes to cleaning electronics. They represent a large investment and there is always some fear that the wrong cleaner will cause serious damage or leave behind something permanently streaky, especially when it comes to screens.

Computer screens represent a special situation, (please see below) but electronics, in general, are not as delicate as you might think. Isopropyl (rubbing) alcohol may seem too strong but it is actually better than most cleaning products for maintaining your electronics collection. You just need to know how to use it.

Household rubbing (isopropyl) alcohol is great for cleaning electronics. It kills fungus, bacteria and viruses, including E. coli, S. aureus, and the coronavirus that causes COVID-19. TheCDC recommends a 70% diluted version for disinfecting homes and schools.

It can be convenient when you don’t like the smell or when you have a lot of electronics and only a little rubbing alcohol on hand. Keep in mind, though, that when it is diluted more than 50%, its effectiveness drops. If you are cleaning a computer in a crowded office you do not want the germ-killing power watered down.

It is important to distinguish isopropyl alcohol from ethyl alcohol. Isopropyl or rubbing alcohol is what you want for cleaning electronics. Ethyl alcohol is the type found in alcoholic beverages like vodka and in some cleaning products. It does not evaporate as fast and can leave an oily residue.

Almost everything on your computer, television and phone can be cleaned with isopropyl alcohol just fine. Sometimes the anti-glare designs of some computer screens can be a bit delicate. Check manufacturer instructions the first time you clean any screen to make sure you get the right chemical.

It’s best not to spray rubbing alcohol or any kind of cleaner onto a screen or any other part of your electronics. There is a slight chance of the mist getting into speakers, keyboards or other crannies, which could impact performance. Pour some rubbing alcohol onto a cloth or cotton ball and use that to clean instead.

Paper towels might have been fine for old televisions with their glass screens but they do not work on modern screens. They can leave tiny scratches and residue.

Glass cleaners are formulated for windows and mirrors. Also, they don’t kill germs. Rubbing alcohol does. If you are cleaning a computer in an office during flu season you know how important this is.

If you are very focused on killing germs, it may seem like a Clorox wipe would work just fine. On many computer brands, it is OK to use those pre-moistened wipes (Apple says it is fine for almost all of their devices), but there are brands that can be damaged by Clorox wipes.

This has a very high alcohol concentration so it will kill germs easily and dry quickly. It is well regarded and will work perfectly with a cotton ball or microfiber cloth.

Angie Parkinson is a writer for BestReviews. BestReviews is a product review company with a singular mission: to help simplify your purchasing decisions and save you time and money.

Display technology has come a long way in recent years. OLED and LCD screens are brighter, more colorful and responsive than ever before, but at some point, they all still succumb to dust, dirt and grime. What’s worse is that there are a plethora of cleaning products out there that claim they can make your screen sparkle again. But in our testing, we’ve found that the simplest route is actually the best. In this how-to, we’ll show you how to clean all the screens in your home, from TVs to smartphones.

Before we get to how to clean a screen, there are a few ways you don’t want to go about the process. The first, and most important, is that you don’t want to clean a display using substances like isopropyl alcohol or Windex. Alcohol- and ammonia-based cleaners can damage your screen’s anti-reflective coating. Using those substances repeatedly can lead to clouding and the coating becoming uneven.

Companies like Whoosh make cleaning agents that won’t damage your screen, but in my experience, you’re best off using distilled water. It’s more affordable than a dedicated cleaning agent and more versatile too since you can use it on a variety of surfaces. It also won’t leave behind any residue on your display, which is something I’ve seen products like Whoosh do occasionally. You can buy distilled water at a grocery store or make it yourself with some simple cookware.

In a pinch, you can use tap water, but we recommend against it. Depending on the hardness of the water in your area and how your municipality treats it, there may be minerals and chemicals that will again either leave behind residue or, worse yet, damage your display’s coating.

Once you have some distilled water, you’ll want a separate spray bottle. One option is to reuse one you already have at home, but if you don’t have a spare, Muji makes these handy travel bottles in 100ml, 50ml and 30ml sizes that are perfect for the task, and you can find similar bottles on Amazon.

Next, be mindful of what you use to wipe your screen. You want to avoid using paper towel, dish rags and anything else that may have an abrasive surface that will damage the coating on your screen. You can use the sleeve of an old but clean t-shirt. That said, you’ll get the best results using microfiber cloths. That’s because the fabric they’re made from is extremely soft and good at attracting dust. We suggest buying a pack of them so that you always have a clean one on hand. The last thing you want to do is use a dirty one and transfer any dirt and grime onto your display.

Lastly, avoid spraying any liquid directly on a display. You’ll have a lot more control if you deposit it on your microfiber cloth and it’s much easier to avoid any of it making its way into the more sensitive parts of the display.

With all that out of the way, the actual process of cleaning a display is straightforward. If you’re only dealing with some dust, use a can of compressed air or an air blower to dislodge it. You can also turn to a dry microfiber cloth.

For anything more than that, dampen your microfiber cloth with a small amount of distilled water and then gently wipe the display. Once you’ve gone over the entire surface, turn over the cloth and use the dry side to remove any excess water. At this stage, avoid buffing the screen or using excessive pressure. You don’t want to work any particles into the surface of the screen.

That’s it. You should have a clean display now. Obviously, it will take longer to clean a bigger screen, but you can put to use the tips mentioned for all types of displays, including TVs, monitors and glass smartphone displays.

This is an archived article and the information in the article may be outdated. Please look at the time stamp on the story to see when it was last updated.

It is pretty normal to pause or hesitate when it comes to cleaning electronics. They represent a large investment and there is always some fear that the wrong cleaner will cause serious damage or leave behind something permanently streaky, especially when it comes to screens.

Computer screens represent a special situation, (please see below) but electronics, in general, are not as delicate as you might think. Isopropyl (rubbing) alcohol may seem too strong but it is actually better than most cleaning products for maintaining your electronics collection. You just need to know how to use it.

Household rubbing (isopropyl) alcohol is great for cleaning electronics. It kills fungus, bacteria and viruses, including E. coli, S. aureus, and the coronavirus that causes COVID-19. TheCDC recommends a 70% diluted version for disinfecting homes and schools.

It can be convenient when you don’t like the smell or when you have a lot of electronics and only a little rubbing alcohol on hand. Keep in mind, though, that when it is diluted more than 50%, its effectiveness drops. If you are cleaning a computer in a crowded office you do not want the germ-killing power watered down.

It is important to distinguish isopropyl alcohol from ethyl alcohol. Isopropyl or rubbing alcohol is what you want for cleaning electronics. Ethyl alcohol is the type found in alcoholic beverages like vodka and in some cleaning products. It does not evaporate as fast and can leave an oily residue.

Almost everything on your computer, television and phone can be cleaned with isopropyl alcohol just fine. Sometimes the anti-glare designs of some computer screens can be a bit delicate. Check manufacturer instructions the first time you clean any screen to make sure you get the right chemical.

It’s best not to spray rubbing alcohol or any kind of cleaner onto a screen or any other part of your electronics. There is a slight chance of the mist getting into speakers, keyboards or other crannies, which could impact performance. Pour some rubbing alcohol onto a cloth or cotton ball and use that to clean instead.

Paper towels might have been fine for old televisions with their glass screens but they do not work on modern screens. They can leave tiny scratches and residue.

Glass cleaners are formulated for windows and mirrors. Also, they don’t kill germs. Rubbing alcohol does. If you are cleaning a computer in an office during flu season you know how important this is.

If you are very focused on killing germs, it may seem like a Clorox wipe would work just fine. On many computer brands, it is OK to use those pre-moistened wipes (Apple says it is fine for almost all of their devices), but there are brands that can be damaged by Clorox wipes.

This has a very high alcohol concentration so it will kill germs easily and dry quickly. It is well regarded and will work perfectly with a cotton ball or microfiber cloth.

Angie Parkinson is a writer for BestReviews. BestReviews is a product review company with a singular mission: to help simplify your purchasing decisions and save you time and money.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

You spend a good amount of time looking at your TV screen, so it"s surprising when you don"t notice how dirty it is. However, dirt and debris have a way of building up on screened devices, and if you want the best performance, you have to clean your TV and other screens from time to time. Gunk and other accumulated detritus can be damaging to your precious TV panel, so it"s best to give your television a good cleaning. Fortunately, you only need a few products to get the job done, and it"s a fairly straightforward process. Read on to become an expert in cleaning your TV.

Step 3: When it’s cool to the touch, dust the screen to remove any dirt particles, then wipe it over with your soft, lint-free cloth to remove any residual dust.

Step 1: Mix the isopropyl alcohol with water in a measuring cup, ensuring the solution is equal parts water and alcohol. If you don’t have a measuring cup, try using a shot glass to measure quantities before mixing. In any case, just make sure you’re not overdoing it with the alcohol — the resulting solution shouldn’t be more than half alcohol or it could tarnish the display.

Step 4: Use the second lint-free cloth to dry your display. Don’t leave any moisture on it — you’ll want it to be completely dry before turning the TV back on.

We can’t just ignore the O.G. hardware. If you’ve still got an older tube-style TV hanging around the house and it simply refuses to die, here’s a quick how-to for getting the smudges and dust off of your old giant. Luckily, you’ll be able to use some household cleaners you probably have hanging around.

Step 2: Once the TV has settled down to room temperature, grab that same microfiber cloth you used for your prized living room QLED and wipe away any dust on the tube TV’s screen. Once the dust has cleared, you may still have fingerprints and other gunk to contend with.

Step 3: To clear the rest of the mess, you can use the same solution you put together to clean your high-end TV. If you’re lacking the materials to create this concoction, you can use a regular glass cleaner instead. This is because most older tube TVs actually have glass screens.

Important note: Do not under any circumstances use regular glass cleaner to clean an HDTV. The harsh chemicals used in the cleaner will damage the TV screen.

Additional tipsIf your TV’s bezel makes it difficult to clean the corners and near the edges of the display, use a cotton swab dampened with your solution to get to the hard-to-reach areas.

Make sure you’re using the right chemical. Don’t use ethyl alcohol, acetone, toluene, ethyl acid, ammonia, or methyl chloride — only isopropyl alcohol.

No matter where LCD screens are kept, they will always need cleaning from time to time. Cleaning an LCD may seem like a daunting task, but there are a few simple ways to clean it without damaging to scratching to surface.

There are many cleaning solutions available in shops. However these may seem a bit expensive and are sometimes quite unnecessary. PixelClean is one of the better and less expensive brands. It is highly recommended. Most products will come with instructions on how to use them.

It is recommended to use a simple alcohol solution to clean an LCD screen. This solution is made up of part distilled water and part 50% isopropyl alcohol. Be warned that isopropyl alcohol is flammable.

50% isopropyl alcohol is very common. If you find 70%, 91%, or 99% isopropyl alcohol, adjust the formula to use less alcohol and more distilled water.

The reason you want this mixture is because alcohol evaporates so quickly. More importantly, it doesn’t leave any residue behind, so the screen will be cleaned without there being any streaks or marks left. You can buy this at your local pharmacy–it’s used for cleaning wounds.

Do NOT use tissues/Kleenex to wipe your screen. That is ineffective, because they will leave little tissue particles all over your screen. You want a 100%-cotton cloth that is soft and absorbent. A t-shirt is a good cloth, but so is a sock or a Turkish towel, so long as it is 100% cotton.

Stay away from cloth that has polyester in it because this can contain stiff filaments. These filaments can scratch the screen while you are rubbing over it. Also stay away from paper towel and tissues. While it might feel soft, remember that it is paper and therefore, it comes from wood. This means that there might be microscopic wood fragments in the paper towel that will scratch your screen if you move it over it. Therefore, avoid anything paper and instead, focus on the cotton.

First dampen the cloth with the alcohol solution. You should never spray any sort of liquid directly onto the screen. You also don’t want to try and clean the screen without some sort of liquid because the dust particle, as it is moved across the screen, will scratch.

Wipe the screen gently from top to bottom or in a counter clockwise direction, and wait for it to dry. You’ll remove all of the dust and the liquid that is on the screen will evaporate quickly. Then, the screen will be clean and scratch free.

Be careful not to let the cleaning solution leak into the sides of the monitor. Also, be certain that you do not press hard on the LCD screen. You can permanently damage an LCD screen by pressing on it too hard.

If there is just dust on your screen, there is no need to fully clean it. To remove dust all that must be done is to wipe it away with a microfiber cloth. Simply wipe your screen from end to end gently with the cloth.

These displays are not constructed to be touched. It"s very important to exercise care in the handling of a liquid crystal display. The tiny dots that make up the images on the screen are each a separate transistor/crystal. Pressure can "crack" pixels easily, and when the pixels are damaged, black spots fill those areas of your monitor.

Pressing and poking, whether with a dull object such as your finger, or a sharp object, such as a pen or knife, typically damages far more than one individual pixel.

Silk is unnecessary and because of it"s non-absorbent nature makes for a poor wiping material. Silk, despite its ooo-ahhh factor, is really just going to push things around.

Don"t attack a dusty monitor with a great deal of force, regardless of your cloth. Attacking a dusty monitor with anything transforms your wiper into a piece of fine gritted sandpaper. Use a Swiffer duster (the "feather duster" type with a handle... not the cloth), a microfiber or cotton cloth, or a can of compressed air to get the dust off before you clean with a liquid product.

Isopropyl alcohol at 100% would not be something you"d want to soak a piece of plastic in, but in a 50/50 combination with water (or even less) it will dissolve finger-print oil and many other marking agents and evaporate quite fast (thus while it may HARM plastic if left exposed it doesn"t get the chance) and it"s evaporation process forces the water around it to also evaporate quickly.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

There’s definitely a wrong way to clean your TV or monitor screen. Mess it up and you’ll be looking at scratches, smears, or worse for a long time. Get it right and your display will gleam like the day you bought it.

Your TV or monitor manufacturer likely has its own set of cleaning instructions for your specific display type. This goes for LG OLEDs, Samsung QLEDs, and Dell touchscreen monitors.

While these manufacturer guides often err on the side of caution and recommend very little in the way of cleaning products, you may also find some specific advice to your particular display and the types of coatings used on it.

Some manufacturers, like Dell, recommend 70-90% isopropyl alcohol on some products. Others like LG recommend never even moistening the display. If your display is still under warranty, you might want to carefully follow these instructions to avoid any problems if you have to make a claim later on.

By far the most important thing to remember is to avoid any harsh cleaning chemicals, including glass cleaners like Windex, polishes, and even isopropyl alcohol unless you have specific clearance from the manufacturer that this will not damage the screen.

Such cleaning products are usually made with ammonia, alcohol, and contain other products and fragrances that could damage the display. These screens often have protective coatings on them to combat glare and reflections, or oleophobic coatings to repel fingerprint oil in the case of touchscreens.

If you’ve already used something like this will no ill-effect, consider yourself lucky and avoid using it again in the future. Many displays will be utterly ruined by the application of these household cleaners, leaving streaks and clouding that could render the display worthless.

Canned air is a great way of removing dust from a display surface without causing any damage. Dust particles, though small, may scratch sensitive surfaces when pressure is applied. By not touching the display, you’re minimizing your risk of scratching the delicate surface. This is especially true of glass TV and monitors, like those that use OLED technology.

Second to canned air is a high-quality microfiber cloth, ideally one with deep grooves to catch all of the dust without moving it over the screen. Use the lightest of touches when cleaning to avoid undue pressure on the display. You may need to turn to a microfibre cloth when canned air simply won’t cut it.

Avoid any paper-based cleaning products like tissues or kitchen towels since this contains lots of small fibers that can scratch the display. This is good advice in general when cleaning anything reflective, whether it’s a shiny plastic gadget or a pair of reading glasses.

You should take care when cleaning the microfibre cloths too. Avoid putting them in the wash with any fabric softeners or in the dryer with a dryer sheet since these products contain oils and waxes that may transfer to any surfaces you wish to clean. This will leave unwanted streaks on your display.

Lastly, if your microfibre cloth has a tag then be aware that the tag probably isn’t made of the same microfibre material and may cause damage to your display. For peace of mind, snip off any tags with a pair of scissors before using the cloth.

When air and dry microfibre cloth don’t cut it, you may need to turn to distilled water instead. While tap water often contains particles and minerals that may scratch your screen, distilled or “pure” water does not.

Use a pump spray bottle to mist a microfibre cloth until just damp, then spot-fix any stubborn grime that has adhered itself to your screen. This will likely only work for dry matter. Oil and other streaky marks will likely need a different approach.

Be aware that some manufacturers will never recommend using any moisture near your display. LG is one such display manufacturer that dissuades customers from doing so, though the company does not acknowledge that a dry microfibre cloth is often not enough to remove stubborn dirt.

You’ll have to use your intuition at this point. We’ve used distilled water and a microfibre cloth to remove dried-on grime from a glass-panel LG OLED with no ill effect since the alternative was a distractingly dirty screen.

Some experts recommend using a small amount of dishwashing liquid dissolved into distilled water to remove oily stains with a microfibre cloth. Once you’ve attacked the effective area, a clean microfibre cloth that’s been moistened with distilled water should remove any remaining residue.

If you’re not comfortable doing this, there exist purpose-built cleaning solutions like AudioQuest CleanScreen that promise to safely clean display surfaces without damaging them. There’s always a risk of damage when using any product, though purpose-made solutions are a lot safer than household cleaners and tap water.

LCD screens use LED backlights which can kick out a fair bit of heat, while OLED displays also generate heat as a byproduct of the chemical reaction that lights up individual pixels. Plasmas and CRTs were also notorious for heat production, so cleaning the back of a display is equally as important as cleaning the front.

Make sure you take the time to blow out any dust from vents using canned air or use a microfibre cloth to remove any material that may hinder cooling. Take care not to use a vacuum or similar since static electricity can build up and cause damage to internal components.

While you should take care to make sure dust buildup at the back of the unit is kept to a minimum, you’re better off cleaning the front of the display as sparingly as possible to avoid scratching glass or wearing down panel coatings.

The cleaning and sanitization possessions have become a major topic in the wake of COVID-19. When we think about the things that we use most often and require the highest level of cleaning, it may be that electronic screens get forgotten. People are using devices such as smartphones and tablets for many hours of the day. Now is a good time to sanitize and clean electronic screens.

In fact, the whole situation has forced many people to consider bringing in professional cleaning expertise to their home. Sanitation specialists Supreme Cleaning have seen a huge spike in the demand for high-grade cleaning in residential properties:

“Customers want their houses to be cleaned as thoroughly as possible,” says Stephen Donegan, Director atSupreme Cleaning“electronic devices are a big part of that, and we use specialist products to ensure devices are sanitized to the right standards”.

But it is not necessary to go to the extent of having professional cleaning carried out. In fact, there are plenty of things that anyone can do at home to sanitize their electronics.

The first thing to note is that there area lot of wrong answers, and only a few right answers. It is absolutely vital, then, to understand exactly what you should not be doing when you clean your phone screen. Here is what you shouldn’t do:

+Do not use alcohol or ammonia-based cleaning solutions on LCD screens– whilst these products may offer strong sanitation results, they can also be harmful to the screen

No matter what type of screen you are cleaning it is important to prepare it first. Turn off the device before you apply any kind of cleaning agent. Screens should not be warm from use when you clean. This can either make cleaning harder or, worse, damage your device. Next, you should wipe down the screen with a clean, dry microfiber cloth to remove any dust.

Not all electronic screens are the same. You need to be careful with which cleaning agent you decide to use. LCD screens are especially delicate – as we have discussed above, alcohol-based cleaners should not be used. Instead, you should use a microfiber cloth either dampened with water or diluted vinegar. These are sensitive enough to clean the screen without damaging it.

Touchscreens are typically hardier, but they also require more thorough cleaning as they are touched more often, leaving fingerprints and grime. It is important todisinfect them as well as cleaning them– so use a solution of diluted rubbing alcohol. You should first check the product, as many electronics recommend different ways to clean.

With electronic screens, it is always best to never allow them to get very dirty. This avoids the needs for in-depth and invasive cleaning, which has a greater chance of damaging the device and the screen.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

As an Amazon Associate, we earn from qualifying purchases made on our website. If you make a purchase through links from this website, we may get a small share of the sale from Amazon and other similar affiliate programs. You can read our complete legal information for more details.

Cleaning touchscreens is a daily task that needs to be done safely. There are several ways to safely clean a laptop screen, such as touchscreen cleaning wipes, lint-free microfiber cloths, and touchscreen sprays.

To safely Clean a laptop screen without destroying it, any alcohol-based cleaners such as Windex or Lysol should be avoided as they can damage the display and cause discoloration. You should also avoid using tissues, paper towels and toilet paper as they may scratch and abrade the screen. Water can be used on microfiber cloths, but only a very small amount.

I personally use MiracleWipes since they are designed for touchscreens. I damaged my screen using a papertowel and Windex in the past, and since then went with the proper cleaning product.

Many users cleaning their touchscreen device (iPad, phone, tablet, laptop, and computer) are afraid if they use the wrong cleaning supply they might destroy or up their touch screen laptop.

Manufacturers aren’t always clear and the user may not know how it works, if something damages it, or what works best. Which is what we will explain in further detail.

Some methods do not entirely clean the bacteria off and its important to know which do and which don’t in addition to looking out for the safety of your touchscreen device’s screen.

Although alcohol-based cleaning solutions are effective for cleaning non-touch screen laptops, rubbing alcohol should not be used to clean a touch screen device.

Glass cleaners like Windex and all-purpose cleaners like Lysol should be avoided because of the risk of damaging the touchscreen. The problem with such disinfectants is that they contain strong cleaning chemicals.

Touchscreen devices have a special oleophobic coating (membrane) that can be damaged by alcohol. So if you clean your touchscreen with alcohol, it can damage the screen by discoloring it. For this reason, we have identified the best ways to clean a laptop touchscreen.

Below we explore and describe all the ways to clean a touchscreen laptop and a standard laptop screen/display while avoiding damage to your screen. Be sure to understand what type of device you are using and test in small amounts to be extra safe.

As one of the most popular screen wipes on Amazon, MiracleWipes are ideal for cleaning all screens, including touchscreens. Therefore, whether you want to clean the screen of your MacBook, TV or the touchscreen of your Lenovo laptop, MiracleWipes are a smart solution.

The pack contains 30 (or 60) cleaning wipes that won’t cause damage to screens and surfaces. Thanks to their Quick-Dry formula, these wipes dry quickly and remove all water stains, skin oils, fingerprints, etc. A MiracleWipes pack also contains a high quality microfiber cloth for regular wiping of your screens.

Magic Fiber is another reliable solution ideal for cleaning touchscreen devices. In contrast to the MiracleWipes reviewed above, Magic Fiber is a pack of microfiber cleaning cloths. Likewise, this is an excellent solution if you want to remove dust, smudges, fingerprints, and dirt. A great thing about magic fiber clothes is that they are specially designed for screens of any kind.

Likewise, Magic Fiber is a great solution for cleaning your smartphone screen, non-touchscreen Dell laptop, or touchscreen Asus laptop. Additionally, Magic Fiber cleaning cloths are ideal for touchscreen devices as they don’t leave scratches, marks, or streaks.

Although Miracle Wipes are better when it comes to wiping your touchscreen (as they are wet wipes), magic fiber is an excellent solution for safe, dry cleaning.

Mist Cleaner works differently than the products reviewed above. This is one of the few cleaning products that allow you to spray a touchscreen safely. As a super portable cleaner (it has lipstick size), this is a high-end yet affordable cleaning solution.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.

Mist Cleaner comes as a two-in-one package. It includes a spray and a microfiber cloth. This combination will clean and disinfect any touchscreen in no time. Mist Cleaner should be used at a distance of 10 cm from your screen as with all sprays. As long as you follow this simple rule, Mist Cleaner won’t harm any touchscreen device as it doesn’t contain alcohol or any other cleaning chemical.

Although many people use to clean their laptops screen with tissues, paper towels, and toilet paper, this isn’t a brilliant idea. Using such methods isn’t recommended as it could scratch and scrape the screen. Even if you try to clean the screen softly and with a circular motion, this doesn’t necessarily mean it won’t damage the touchscreen.

So, you should always use specially created dry clothes to remove any moisture. Using a lint-free microfiber cloth such as the Magic Fiber reviewed above is the best way to go.

All of the suggested cleaning methods reviewed above have a common feature: they aren’t alcohol-based. Unfortunately, even if you use a tiny amount of an alcohol-based cleaning supply, it still can damage your touchscreen. What we mean by that is that cleaners like Windex can interfere with the touch panel of your screen. This can be catastrophic for your ability to perform touch commands.

Apart from that, alcohol-based cleaners can also damage (discoloration) non-touchscreen devices such as traditional HP laptops, Acer laptops, Apple MacBooks etc. For all these reasons, you should always prefer non-alcohol-based cleaners to wipe any electronic display.

Some wipes have a very small amount of alcohol in them and can be used at your discretion, most users claim it doesn’t destroy their device, but its better to go with a non alcohol based solution if you’re worried about your electronic being damaged.

What happens if you run out of microfiber cloths or touchscreen cleaning wipes? Well, you can still use a small amount of water. Still, this isn’t the best solution as water will smear your display. If you use a larger amount of water or hot water, this will likely damage your screen and leave streaks.

That being said, using a very light spray of water on tissue paper could be an emergency solution. However, you have to be very careful with the amount and temperature of the water.

Leaving the touch screen on is one of the most common reasons people damage their devices’ touchscreens. Of course, using a microfiber cloth won’t cause any damage to the screen. However, if you use wet wipes or a non-alcohol-based cleaner like MistCleaner, you should always turn off your device before cleaning the display.

In fact, cleaning your screen in such ways without turning off your device can result in damaging your touchscreen display permanently. This also applies to all electronic displays, like the IPS screens of traditional (non-touchscreen) Dell laptops. Also, even though this is extremely rare, leaving the touchscreen on and cleaning it with wet wipes or sprays might shock you.

You should be careful when cleaning the screen of all devices. Whether you own a touchscreen tablet like an iPad or a non-touchscreen one like Macbooks, using regular (alcohol-based) cleaners could damage the screen. The new Apple Retina screens are pretty resistant to water damage.

Still, if you need to clean your screen, you should only use the cloth that came with your Macbook or another lint-free cloth. Alternatively, you can use wet wipes or sprays that are specially designed for screen cleaning (see above).

Most modern cars come with high-end touchscreen displays. You should be very careful when cleaning a car touchscreen. Most touch screens made for cars are used as control panels for many features, including the GPS, radio, AC, etc. Since those features are critical, you shouldn’t use alcohol-based cleaners.

In fact, such cleaners can damage your screen and affect the function of the car’s AC or GPS. Since touch screens for cars are generally more sensitive, you should also avoid cleaning them with water. That being said, using a cloth or (certified for touchscreens) wet wipes are the best ways to go.

Even though using water to clean a touch screen won’t necessarily damage it, you should proceed carefully. If you run out of wet wipes or sprays for touch screens, you can use a small amount of water on a microfiber cloth. However, you shouldn’t use hot water, as it might harm the screen.

Still, cleaning a touchscreen device with water isn’t effective either. In most cases, water will leave streaks. Even if you spray your cloth with a small amount of water, it won’t clean the screen properly, and you risk causing your touch screen to not work. For this reason, we do not recommend cleaning any electronic screen with water.

There are a few different Ways to Write and Draw on a Non Touch Screen Laptop, so depending on which route you take the water damage may differ in severity (if at all).

If concerned with the actual bacterial cleaning of a computer touch screen you may want to more closely consider your options and view a purely educational source for this data (source).

Although cleaners like Lysol are highly effective for numerous tasks, touchscreen cleaning isn’t one of them. In fact, most all-purpose cleaners like Lysol are alcohol-based. Alcohol will likely destroy the membrane (oleophobic coating) of touchscreen devices like the Microsoft Surface Pro. For this reason, using cleaners like Lysol to clean a touchscreen isn’t a good idea.

As with cleaners like Lysol, using Clorox disinfecting wipes to clean any laptop screen isn’t recommended. Most screens come with a thin outer film. Such disinfectant wipes tend to harm this film. For this reason, you should only use sprays or wet wipes that are specially designed to clean laptop, tablet, and mobile phone screens.

As mentioned above, Strong disinfectants shouldn’t be used on all types of touchscreen devices. Likewise, cleaners that contain alcohol, bleach, ammonia, or hydrogen peroxide should be avoided. Therefore, using any type of bleach antimicrobial spray on a touch screen isn’t a safe option.

Magnets can harm touchscreen devices. However, for this to happen, it requires a big and strong magnet. So if you drop a magnet on your touchscreen, there are not many chances to damage or ruin it. In fact, most modern LCD screens like those on laptops and smartphones are not easily affected by magnets.

In this post, we have covered the best ways to clean a laptop touchscreen.To safely clean a touch screen as well as a non touchscreen laptop, alcohol based cleaning products should be avoided.

A laptop owner should never use rubbing alcohol for a touchscreen display specifically because it has been shown to damage the screen and not prove safe for the longevity of the devices display.

This means avoiding Windex, Lysol, and other similar products.The chemicals can certainly interfere with the touchscreen devices touch coating (Oleophic coating). By using these products, and not a dedicated touchscreen wipe or method, you can cause a color issue on the display (discoloring).

Yea at your typical store, pharmacy, walmart; all of those isopropyl % you should see no differences in costs between them. Usually found in a pack of 2 bottles (16 fluid ounces each) for around $3 - 5 USD or so.

I also like to make use of gloves when working on PCs depending what all is involved with handling it overall. Such as Black or Purple; disposable nitrile gloves, powder free, latex free...

As dealing with some peoples stuff, I don"t really like bare-hands touching other people stuff regarding their Laptops, Keyboard, Mice, Phones, Tablets; etc. so it helps me, as well as even with dealing with a fresh PC build, it helps keep Cases and hardware in general free of your hands oils, finger-prints, things of that sort. Plus helps with things like thermal paste; in the past I"ve gotten it on my hands, wiped my hands "clean" as much as I could tell on another paper towel or alcohol wipe; and sure enough sometimes miss a spot somehow and maybe end up transferring that by skin over to a piece of hardware; with the gloves it"s much much easier to spot if you were to get that on your fingers as it tends to show up much easier on such gloves as I mentioned already.

Isopropyl alcohol is a component in an awful lot of important cleaning products — medical swabs, cleanroom wipes, disinfectant solutions, detergents, and so much more. It’s even an effective product all by itself, sold in sprayers and gallon jugs in grocery and hardware stores, not to mention at specialist suppliers like SOS Cleanroom.

Have you ever considered how isopropyl alcohol is made, or how many uses it actually has? If so, then this blog is for you! Read on to learn everything you need to know about this essential chemical compound.

We may be used to calling it isopropyl alcohol, but it goes by other names too: IPA, sec-propyl alcohol, 2-propanal, and isopropanol (the last name being disputed as it not an actual “real thing” in science). Anytime you see these terms in a list of ingredients for a particular item, you’ll know that it has isopropyl alcohol in it.

Although it may — very, very rarely — appear in nature under the right conditions, isopropyl alcohol is almost exclusively manmade. First produced in 1920, it was manufactured by Standard Oil for use as an oxidation catalyst in acetone. During World War II, IPA and acetone were used in mass quantities in the production of cordite, a smokeless propellant; it wasn’t until later years that IPA was found to be effective as a sanitizing and anesthetizing agent when it was mixed with water.

Isopropyl alcohol is a solvent, and as such it is made up of different compounds. There are different methods, using different compound combinations, that will produce isopropyl alcohol:Indirect hydration of propylene — this was the only method used to make IPA up until the early 1950s. It works by combining sulfuric acid and propylene, turning it into monoisopropyl. This mixture is then combined with water to hydrolyze (or break down) the mix, turning it into IPA.

Catalytic hydrogenation of acetone — when hydrogen gas is mixed with acetone (an organic liquid), and then a little bit of metal is thrown in as a catalyst, the mixture reacts under hydrogenation and turns into IPA.

Direct hydration of propylene — a process invented recently, it requires water, propylene, and some sort of acidic catalyst like phosphoric acid. When the mixture is exposed to high pressure, it produces a blend of water and isopropyl alcohol that can be separated by distillation.

Isopropyl alcohol is not limited to just sanitizing and cleaning surfaces. It has a host of uses in a variety of industries.As a solvent, IPA works extremely well because it evaporates almost instantly, is relatively non-toxic compared to other solvents, and leaves no trace oils on a surface.

In the medical field, isopropyl alcohol is a major ingredient in products like rubbing alcohol, hand sanitizer, and surgery wipes. It is an essential part of the medical industry.

In laboratory settings, IPA comes in handy as an alternative to formaldehyde, which is used primarily as a specimen preservative. In addition, IPA is often used in DNA extraction.

IPA can be combined with acetate to create isopropyl acetate, a powerful solvent. It also reacts with carbon disulfide and sodium hydroxide to make a widely-used herbicide.

In the automotive industry, isopropyl alcohol is a major ingredient in fuel additives, as it works extremely well to “dissolve” any water that may be floating in a fuel tank. It is also used to remove excess brake fluid from braking systems.

Be careful when you use isopropyl alcohol — it is extremely flammable, and can form into an explosive peroxide under certain conditions such as being exposed to magnesium. If you’ve ever seen YouTube videos of people lighting their hair on fire with IPA, then you’ll know exactly what we’re talking about here.

As far as health concerns go, it’s never a good idea to use isopropyl-based products without glove protection, and you may want to consider wearing a disposable mask too, in addition to plenty of ventilation. Not only is IPA a skin and lung irritant, but prolonged exposure to it can have other negative health effects as well — it is classified as a central nervous system depressant, which means it can cause:Flushed skin

In cases of severe overexposure, it can even cause respiratory depression, severe central nervous system issues, and liver damage. In worst-case scenarios, overexposure can even put you in a coma. It’s no wonder isopropyl alcohol is no longer used as an anesthetic during surgeries like it was back in the early 20th century..

With almost 30 years in the cleanroom industry, SOS Cleanroom has the experience and knowledge you need to get the best in cleanroom supplies and advice. Whether you’re looking for antibacterial wipes, disinfectants, liquid cleaners, or industrial swabs, SOS Cleanroom will go above and beyond to get you the latest and the greatest in cleanroom technology, all at a reasonable price.

Learn how to clean a laptop screen with this guide. Your window to the digital world is crucial to your computing experience. But it also has a habit of attracting all sorts of dirt and dust, whether that’s from food stains like errant spaghetti sauce splatter to imperceptible bacteria and particles.

It’s even more important that you know how to clean a laptop screen properly because the coronavirus that’s plunged the world into a pandemic has been found to survive on certain surfaces for several days.

While the glass screens of older CRT displays had an extra layer of protection, newer LCD laptop screens do not. That means you want to avoid using harsh products like glass cleaner or window cleaner to clean a laptop screen.

While some screens, like certain MacBook displays and touchscreens, come with an oleophobic layer, which offers some protection against fingerprints and smudges, you can wear that layer off if you use alcohol-based cleaners.

You can use 99% isopropyl, but if you’re feeling cautious about it being too strong, you can just as well use 75% or gentler stuff instead. In fact, isopropyl diluted down as far as 60% with purified water can even be more effective than 99.9% isopropyl, because the water makes the solution better at permeating microorganism cell walls and slows the solvent’s evaporation time, increasing the time it spends in contact with the microorganism.

Isopropyl is an effective germ-killer, but doesn’t have any anti-static or specifically anti-streak properties that dedicated screen cleaners contain. So after (or instead of) wiping your laptop screen with isopropyl, you should use a non-alcoholic screen cleaner to finish the job.

Ecomoist(opens in new tab) and WHOOSH!(opens in new tab) are two of the more popular laptop screen cleaners, though there’ll be plenty of similar ones out there that probably work just as well. They’re alcohol-free, biodegradable, and their anti-static formulation will keep those dust particles off your screen for a bit longer.

We also think it’s a nice touch that Ecomoist bottles are designed to be refilled, and you can actually buy refills directly from Ecomoist so that you’re using the same spray bottle over and over again.