1602 lcd display module in stock

An LCD display that can display a max of 16x2 charactors. with the help of the I2C bus convertor and related libraried, you can easily use this module with just 2 wires.

A 16×2 dot matrix Character LCD Module display in STN Positive Yellow Green LCD Mode, Six O’clock viewing direction, Wide Temperature Range (Operating Temp: -20°C to 70°C, Storage Temp: -30°C to 80°C), and Yellow Green LED Backlight. It has a transflective polarizer, recommended for applications that will be used both indoor and outdoor. This product is assembled Chip On board with 1/16 Duty and a Controller IC S6A0069 or equivalent. The interface type is Parallel. This is an ROHS Compliant product manufactured with ISO standards and procedures.

Referring to the LCD16020, I believe that everyone is not unfamiliar with the square shape, green color, a row of 2.54 pin header.... LCD1602 module is a product of the DFRobot Gravity I2C series, which has been greatly optimized for its original LCD1602 appearance. This module does not need to adjust the contrast, retain the backlight controllable function, and simultaneously compatible with 3.3V and 5V voltage. The optimisation of function and the appearance will bring you the different experience.

Gravity: I2C LCD1602 Arduino LCD Display Module (Blue) Click a star to leave your reviewWorst experience possibleA bad experienceA moderate experienceA satisfied experienceA very positive experience

Introduction:As we all know, though LCD and some other displays greatly enrich the man-machine interaction, they share a common weakness. When they are connected to a controller, multiple IOs will be occupied of the controller which has no so many outer ports. Also it restricts other functions of the controller.Therefore, LCD1602 with an I2C port is developed to solve the problem. It is also simple to handle. It has only two bidirectional data lines, a serial data line and a serial clock one.How to wire:GND-GND; VCC-VCC; SDA-A4; SCL-A5Features:Voltage: 5V DCLCD display type: CharactersModule dimension: 80mm x 35mm x 11mmData：1602 standard 16-pin interface, including:Pin 1: VSS is the ground power.2 feet: VDD then 5V positive power supply3 feet: V0 LCD contrast adjustment end, then the positive power supply when the contrast is the weakest, the highest contrast when grounded power, the contrast is too high will have a "ghosting", when used by a 10K potentiometer to adjust the contrast.4 feet: RS for the register selection, high-level data register selection, low-level instruction register selection.5 feet: R / W for the read and write signal lines, high-level read operation, low-level write operation.6th foot: E end is enable end, when E end jumps from high level to low level, the liquid crystal module carries out the order.7 ~ 14 feet: D0 ~ D7 for the 8-bit bidirectional data lines.15 feet: the positive power supply backlight16th foot: backlight power negative

Come with 2 iic interface, which can be connected by dupont line or iic dedicated cable. This is another great iic/i2c/twi/spi serial interface. As the pin resources of arduino controller is limited, your project may be not able to use normal lcd shield after connected with a certain quantity of sensors or sd card. However, with this i2c interface module, you will be able to realize data display via only 2 wires. If you already has i2c devices in your project, this lcd module actually cost no more resources at all. It is fantastic for arduino based project.

This is an I2C 1602 LCD module, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already have I2C devices in your project, this LCD module actually costs no more resources at all. It is fantastic for Arduino based project.

Display Features:Green blacklightWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerLCM type: CharactersDisplays 2 lines X 16 charactersVoltage: 5V DC