kuman capacitive 7 inch touch screen tft lcd module pricelist

Kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B (7 Inch Raspberry Pi Touch Screen)

NOTE: 1.Please note Supported update Raspberry Pi 3 2 and RPi 1 Model B B+ BB BLACK supported 2.Power Supply is NOT included.for PI ,do not require power supply 3.There is a sticker on the LCD screen. Please peel off before use. Feature: LCD Size : 7.0 inch (Diagonal) Driver Element : A-Si TFT active matrix Display mode : Normally White ,Transmissive High Resolution: 1152,000 Dots (800 x 3(RGB) x 480 SSD1963 touch panel controller Dot pitch : 0.0642(W) X 0.1790(H)mm Active Area : 154.08(w)X 85.92(H Module Size : 164.9(w)X100.0(H)x5.7(D)mm Surface Treatment : Anti-glare Color arrangement : RGB-Stripe Interface: Digita Blacklight : Highlighted LED lamp backlighting TFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin"s voltage on the module Can not be more than 3.3V Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V Interface Type: 16 parallel Operating Temperature : -20 ~ +70 degrees centigrade Storage Temperature : -30 ~ +80 degrees centigrade Package includes: 7inch HDMI LCD (B) x 1 HDMI cable x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 DVD × 1 SC7B 7 inch HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems With the use of Pi Raspberry, support Raspbian、Ubuntu、Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive

ER-TFTM070-5 is 800x480 dots 7" color tft lcd module display with RA8875 controller board,superior display quality and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 6800 8-bit,16-bit parallel,3-wire,4-wire,I2C serial spi interface.Built-in resistive touch panel controller,it"s optional for resistive touch panel,capacitive touch panel and its controller FT5206,font chip, flash chip and microsd card slot. We offer two types connection,one is pinheader and the another is ZIF connector with flat cable mounting on board by default and suggested.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for7" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

Frequently Asked Questions About kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B in Cayman Islands

Where can I buy kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B online at the best price in the Cayman Islands?

desertcart is the best online shopping platform where you can buy kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B available and ready for delivery in Cayman Islands?

desertcart ships the kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B to and more cities in Cayman Islands. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B speedily without the hassle of shipping, customs or duties.

Is it safe to buy kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B on desertcart?

Yes, it is absolutely safe to buy kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

● Operating voltage: 12V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.

● Support 864 x 480 x 24bit graphics content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive graphics data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.

We understand the urgent needs on geting the parts quickly to make breathing devices. We are now working hard to produce the screens, if you have any question, welcome to send us emails.

ST cooperates with Riverdi because we believe that such partnership brings value to our joint customers. On top of this, we also discovered that we shared some business visions about how to make it easier and faster to go from the initial stages of designing a product embedding a graphical user interface to a production ready product. The conclusion was that combining the STM32 High performance microcontrollers, with the free STM32 graphics toolchain and Riverdi displays + PCB and then merge all of this into a board support package ready to run TouchGFX, would be a compelling offering.

Designing and developing a product with an embedded user interface (GUI), can be complex, as it involves many building block and disciplines, which all requires expert knowledge. Riverdi offer is covering a lot of them, allowing the customer to focus on the most important part of the development, the GUI Application itself. And remember that this is the face of your product. Choosing such solution, the customer does not need to worry about sourcing components like the display, microcontrollers, memory, etc. or even writing low-level drivers, development the board support package or porting TouchGFX. Its all ready done. What makes cooperation with Riverdi unique is that Riverdi has been able to drive a 1280*800 display resolution in high colors, with a STM32H7 microcontroller and a TouchGFX application showing a smart home UI. This shows that Riverdi is well aware of how to exploit all the capabilities of the STM32 Graphics offering combining hardware and software in a unique solution. From the first business meetings, it was clear that we shared visions of the market for embedded GUIs. And Riverdi proved that they can go from an idea and concept to actual working hardware, very fast.