need to replace lcd touch screen on camera manufacturer

A very common camera repair performed today, no matter the type or manufacturer, is the replacement of the LCD (Liquid Crystal Display) screen. At the outset of this walkthrough a few things must be stressed; a disclaimer if you will. Trying to replace an LCD without proper knowledge and experience can be very difficult and sometimes hazardous. Pulling electronics apart and seeing how they work can be fun for some, but it can easily result in further damage and far more costly repairs. Nine times out of ten, when an LCD is being replaced, it is physically broken due to damage that was likely caused by some sort of trauma (from dropping etc).

Cameras are very tightly packed little pieces of technology and generally the LCD is attached to and/or part of a lot of other integral components. Because of this, there is a high probability that there are other things broken that only a trained professional can diagnose/fix easily. Also, having spare parts on hand doesn’t make economic sense for your average consumer because the costs of replacement parts for cameras are not in proportion to their selling price.

Furthermore, camera repair facilities have the necessary testing, calibration and adjustment equipment to get cameras fully operational. Bottom line, if one does attempt this at home, there is very little to no margin for error. Keep in mind this is a general walkthrough NOT a repair guide, I take no responsibility for any damage to property or personal harm that may occur from anyone making use of this information. With that said…

The first things first, parts and tools are necessary to doing this job right. Obviously the part needed is a replacement LCD. It has to be for that particular make and model; this ensures the connections align and it fits properly. The essential tools for “most” LCD replacements are:

And now for the show, replacing the LCD! Please keep in mind this is a general many camera models are more complex and will require additional disassembly in order to remove and replace the LCD.

Location and unscrewing of all housing screws to remove the necessary housing cover(s).It is easy to strip out the tiny screw heads; many manufacturers “glue” the screws in place. If the LCD was damaged due to impact, the housing may have shifted, making the screws problematic to remove.

Proprietary screws can also be a problematic; the screwdriver may have to be special ordered from the manufacturer. Screws may also be hidden behind stickers or panels.

There is a very real risk of shock from this point on. DO NOT TOUCH ANY CIRCUITRY. The flash capacitor circuit on some models is located nearby and will give a painfull serious jolt if one is not careful.

The screws securing the LCD to the rest of the camera are now removed. These are fairly easy to find but there may be additional clips or seals to watch out for.

Connecting components (generally wires or FPC’s) that run from the LCD to the rest of the camera are disconnected using the appropriate set of tweezers.

The new LCD has a protective plastic sheet that is removed before installation. Touching it with bare hands must be avoided, potential damage could be done. It’s also in bad form to get any oils on the nice new LCD screen.

The Battery and memory card are replaced and the camera is powered on. This only tests if the LCD was installed correctly. If the camera/LCD is not working there are countless other things that could be going wrong and are evaluated. As mentioned in the beginning, there is a high possibility that something else is broken and/or needed to be calibrated/adjusted. Further testing of the entire camera must be done to ensure the camera is fully operational.

Just to stress again, trying these kinds of repairs at home, can be a great hobby for some, shouldn’t be taken lightly. Professional photographers always have a backup camera in case of any type of equipment malfunction; it’s not a bad idea.

Kevin Gornto is a Factory Trained and Authorized Technician at C.R.I.S. Camera Services, a digital camera repair company located in Chandler, AZ. Kevin has an electronics degree that provided him with his advanced hardware knowledge and digital imaging expertise. He also enjoys writing about his technical experience and is a major contributor for the company’s camera repair blog; focused on care, maintenance and repair tips for digital cameras and imaging equipment.

However, if the digitizer or LCD is also damaged during a fall, that screen no longer carries value because it cannot be refurbished. Repair shops cannot sell broken LCDs to refurbishing companies; therefore, they cannot offset the cost of an LCD repair. That is why repair stores often charge a little extra if there is damage to the LCD or digitizer, to make up for that loss. Repair stores that don’t have an additional charge for an LCD repair typically inflate their glass repair price to make up for the loss from damaged LCDs. If they have one price, that means everyone is paying more to cover the cost of customers who have damaged LCDs and customers who only have cracked glass. This is why TCR separates the price of glass and LCD repairs for you! If you only have cracked glass, you only have to worry about paying to replace the cracked glass.

If your phone or tablet’s glass is shattered there will be cracks or chips on the screen itself. If it is just the glass that is damaged, the device may still function and you may be able to use it normally. If this is the case, it is likely that only the glass needs to be replaced. To prevent further damage to your device it is best to get it repaired quickly. For example, if liquids seep through the cracks it could cause permanent damage to the LCD.

Many people may continue to use their touchscreen with shattered glass and delay fixing the glass on their devices; however, if the touchscreen isn’t responsive, it could be a sign of more significant damage to the device’s digitizer which is integrated with the LCD screen.

A pixelated screen can indicate LCD damage. This would look like a patch of multicolored dots, a line or lines of discoloration, or a screen with rainbow colors. For many people, these colors are an easy way to know that their LCD is broken and that they should get it repaired.

Dropping your phone isn’t the only reason you’ll end up with a pixelated screen. Over time, your screen’s LCD may break down through regular use. This happens to other devices aside from your smartphone or tablet. Pixelation can happen to TVs and computers, too. People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.

A black screen or black spots on your smartphone or tablet is an indication of a damaged LCD. Often with a bad LCD, a phone may still turn on and make noises, but there is no clear picture. This does not necessarily mean any other part of the phone is damaged and a simple screen replacement will get it functioning again. Sometimes it can mean a battery or other internal component is damaged. It is best to have a highly qualified phone repair technician diagnose what is wrong so the appropriate repair can be made.

Fortunately, your mobile device is fixable whether you cracked the glass or damaged the LCD. Stop by or call TCR: Triangle Cellular Repair at (919) 263-2699 for a free diagnostic and quick, affordable cell phone repair in Chapel Hill and surrounding areas. We’re always happy to help!

OK, I have been reading these comments and while there are some that are correct, there are few or more that are way out there. Guys, as a electronics tech, I have fixed many phones such as this in my time. Yes the cheap screens will fix it most of the time, but there are times when this is not the case. There is no easy fix for this.

First you have to diagnose the problem and the cause and then fix it. Sometimes its as simple as restarting the phone and sometimes the problem is hardware of the phone.

1) Check if the screen responds to any touch at all. If it does work but you get “ghost touch”, problem is likely going to be fixed without replacing the screen. Usually one of the connectors are dirty or not plugged in correctly. Easier fix is to open the iphone, lift the screen from the rest of the case/motherboard and unplug the lcd and other connectors that run from the screen to the board. You could use 99% alcohol and a tooth brush. Scrub the connectors gently and wait a few seconds for the alcohol to evaporate before plugging the connectors in. Usually this will fix the trouble and you will have a perfectly working phone without replacing any parts. IMPORTANT: Do not use 50% or 75% alcohol or acetone. Low grade alcohol is 50% water (and we know what water does to the phones)and the acetone can short out the motherboard or melt the certain parts that are important.

2) If only lower or upper or left or right side of the screen work, chances are very high that you need to replace the screen. You can try the solution above, but it will rarely work.

3) If you had a cracked screen and replaced it with the new one and now touch is not working, chances are that you either did not assemble it correctly or the screen is bad. If your old screen was responding to the touch and the new one doesnt, simply try to install the old one again and see if it still responds to the touch. If it does then the new screen is defective and you should return it. If it doesnt then try the first solution again to see if this will help.

4) Everything is installed correctly but the phone still doesnt work. This can be a bigger issue with the board. There is a tiny little IC(chip) on the phone that controls the touch. There are also few tiny little resistors and capacitors that are connected to the same part of the system. If one of these are bad then your phone is pretty much done. Yes they can be replaced, however finding the person with the skill and equipment to do this it likely near 0. most of the resistors and capacitors are covered with the ceramic coating that is nearly impossible to remove, but it can be done. The best thing technician could do in this case it to reheat the motherboard. This likely will not fix the problem permanently but you may get few extra days, weeks or months before its done for good.

The iphone uses BGA type of chips for all of their phones. These are “ball grid array” chips and they have these tiny little ball of solder that connect to the board. Some may have 10 and some chips have 50-60 or more of them. You can not see them like you would on a SM chip(surface mount). While you are using the phone they have electricity running through them . This makes them heat up and cool down constantly. Problem that occurs is called “Cold solder”. Over the time because of it heating and cooling the solder become brittle and it cracks. Once it cracks it will start to cause problems. This is why sometimes if you press the phone in certain spot it actually starts to work. Well, you are forcing the chip to connect to the board by pressing it in, but once you let go it stops. This sometimes can be fixed by reheating the chip, or to use technical term, “re-flowing”. sometimes it needs so little that the heat may just connect the broken link and it will be fine. Temperature you use to reheat it very important. If you take it to the shop and you see them using one of those industrial heat guns used to strip the paint from home depot, you will probably need a new phone. Temperature is important, but the force of the air flow just as important.

I know most people wont read this whole thing, but there is some useful information I wrote here and everything I wrote applies to almost any phone on market today. All of the phones are basically the same. They all have the same parts, only difference if what those parts are going to look like and their location o the phone, but they all need to have the CPU’s, memory chips, power management chips, lcd or touch controller chips and so on.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Your product is eligible for a battery replacement at no additional cost if you have AppleCare+ and your product"s battery holds less than 80 percent of its original capacity.

Use our “Get an Estimate” tool to review potential costs if you get service directly from Apple. If you go to another service provider, they can set their own fees, so ask them for an estimate. For service covered by AppleCare+, your fee per incident will be the same regardless of which service provider you choose.

All fees are in U.S dollars and are subject to tax. A shipping fee will be added if we need to ship your iPhone. We’ll inspect your product when we receive it and confirm the service charges.

Your country or region offers AppleCare+ for this product. AppleCare+ includes battery service coverage, which means your battery can be replaced at no charge if we test your product and its battery retains less than 80% of its original capacity.

AppleCare+ also provides coverage for accidental damage from handling, and each incident is subject to a service fee. Your AppleCare+ also offers Express Replacement Service.

The Apple Limited Warranty covers your iPhone and the Apple-branded accessories that come in the box with your product against manufacturing issues for one year from the date you bought them. Apple-branded accessories purchased separately are covered by the Apple Limited Warranty for Accessories. This includes adapters, spare cables, wireless chargers, or cases.

Depending on the issue, you might also have coverage with AppleCare+. Terms and Conditions apply, including fees. Feature availability and options may vary by country.

We guarantee our service, including replacement parts, for 90 days or the remaining term of your Apple warranty or AppleCare plan, whichever is longer. This is in addition to your rights provided by consumer law.

Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used genuine Apple parts that have been tested and pass Apple functional requirements.

Apple has determined that a small percentage of iPhone 11 displays may stop responding to touch due to an issue with the display module. Affected devices were manufactured between November 2019 and May 2020.

If your iPhone 11 has been exhibiting this issue, please use the serial number checker below to see if your device is eligible for this program. If so, Apple or an Apple Authorized Service Provider will provide service, free of charge.

Choose one of the options below to have your iPhone 11 serviced. Your iPhone will be examined prior to any service to verify that it is eligible for this program.

If your iPhone 11 has any damage which impairs the ability to complete the repair, such as a cracked screen, that issue will need to be resolved prior to the service. In some cases, there may be a cost associated with the additional repair.

If your car or truck factory radio LCD with touchscreen monitor needs replaced then we provide some of the best replacement car touch LCD screen replacement parts available on the market today. As is Factory Radio Parts standard: all of our car touchscreen repair kits are developed for both ease of use and functionality – so you can get your tunes blasting again in no time!

Car touchscreen damaged? Car radio or car DVD player not working? Let us provide you with 8.4” touchscreen parts, VP3 and VP4 radio replacement touch screens, MyFord touch sync 2 radio screens, RB5 RE2 radio replacement screens from Uconnect, 439 RBZ, 430N and 730N touch screen repairs and 7 inch screens. We supply big names like Ford Lincoln Clarion Navigation replacement parts, Toyota Tundra Panasonic touch screen fixes, RAM Truck, Chevrolet, Cadillac and more!

Take a moment and look at your smartphone. The touchscreen is the only way to operate the device, except for a few buttons on the side, perhaps. Modern cameras also have touchscreens, but often, they are very limited. I wonder why that is.

I have been reviewing cameras for a couple of years now. In that time, I have photographed with almost every camera brand, except Olympus (don’t ask me why, because I don’t know). And I have seen touchscreen functionalities started to appear gradually.

At first, I didn’t find it to be necessary. Why use a touchscreen if you can operate the camera through an array of buttons? Every photographer managed to shoot for decades without the need for a touchscreen. So, why start now? On top of that, when looking through the viewfinder, your face could activate the touchscreen and perhaps change settings unintentionally. Or so I thought. Still, I had no need for a touchscreen. Until I bought my first Canon EOS 5D Mark IV, that is.

For the first time, I got a camera with a very usable touchscreen. I could operate the camera completely by touchscreen if I wanted. And the beautiful thing about it, if I used the viewfinder, the touchscreen wasn’t functional at all. That’s when I changed my opinion, and I started to believe the touchscreen is a handy way of operating a camera. It is quick, it is easy, and no more fiddling about with small buttons or button combinations. But you still have the ability to use button operation, if you don’t want to use the touchscreen.

I discovered the nice possibilities of a touchscreen. Some cameras make it possible to place the autofocus point by touchscreen, just by swiping your thumb. Others can place a histogram anywhere on the screen or operate all the settings by a smart quick menu. These are just a few of the possibilities a touchscreen can offer. I think it"s the next step in operating a camera.

But then it occurred to me. There are only a few cameras with a fully functional touchscreen. Most cameras only offer limited use of the touchscreen. Of course, I haven’t used every camera on the market, but I found a fully functional touchscreen only on the Hasselblad X1D, the Canon EOS M50, the Canon 5D Mark IV, the Nikon Z 7, and a few Panasonic cameras like the Panasonic DC-S1. I believe the Nikon D850 and Nikon Z 6 also have nearly full touchscreen capabilities.

Most modern cameras I reviewed have touchscreens, but these are limited to just a few functions. I noticed this with the Sony a9, the Sony a7R III, the Nikon D500, the Fujifilm GFX50S, and Fujifilm GFX 100, to name a few. Sometimes, you can use the touchscreen, sometimes not. You not only have to remember which buttons to use, but also when you are able to use the touchscreen and when not.

On top of that, isn’t it strange the menu of these cameras cannot be operated by the touchscreen? If smartphones can have a very sophisticated menu that can be operated with your finger, why do modern cameras lack the ability? Is it so difficult to incorporate a fully functional touchscreen? Even car navigation systems have more touchscreen functionalities.

The strange thing is, if you are used to a touchscreen operational camera, like my Canon EOS 5D Mark IV, it becomes very frustrating when you get a camera that is limited to just a few functions. I noticed this again while photographing at Lofoten with the Fujifilm GFX 100. It has a touchscreen, but when I accessed the Q menu, which has a touchscreen-friendly layout, it wasn’t possible to operate it by touching the screen.

I found the same thing with the different Sony cameras. These very sophisticated cameras also have very limited touchscreen abilities. Why not offer the possibility to use the touchscreen for everything? If a smartphone manufacturer can do this, swhy can’t Sony and Fujifilm? After all, the screen is already touch-sensitive. Just write the software. I have to admit I don"t know about the touchscreen functionality on the newer Sony a7R IV. Perhaps it is better already.

I have grown used to operating the camera by touchscreen. That is why I am bothered by all this. It"s a personal thing, I know. Most photographers only use one type of camera, and probably don’t know what difference a fully operational touchscreen can offer. I also know most manufacturers don’t build a camera with every functionality and modern techniques available, because they want to make the next model just a little bit better, perhaps even with some extra touchscreen functions. Or they want to offer extras with a firmware update, something that will extend the possibilities of the camera. After all, we all like to get extras after we have bought something.

Although I understand the reason why we aren’t offered cameras with every functionality available, I also know it is ridiculous why fully functional touchscreens aren’t more common, just like on our smartphones. It is easy to incorporate, I think. Panasonic, Canon, Nikon, and Hasselblad have shown us it is possible. So, I ask all camera builders and designers, especially Fujifilm and Sony, two brands that are often called very innovative, take note of the aforementioned brands with full touchscreen functionalities. Who will be first?

Before I end this article, I think it is good to mention that I don’t think a camera is bad when a touchscreen is not present or not fully functional. I just think it foolish if a touchscreen is so limited.

What do you think of touchscreen functionalities? Do you feel it is an overrated thing, or do you feel it is the best way to operate a camera? Please let me know your thought on this in the comments below. I am looking forward to your opinion.

As mobile phone displays are much tougher than they used to be, it seems like they"re indestructible. Sadly, they"re not. Dropping your phone can often break the display. Your phone can no longer be considered useful.

Cracked your mobile phone display? Dropped it in the street, or crushed it playing football? Sat on it, even? You know by now that you"ve given yourself a headache. Can the phone be repaired, and if so, what are the costs?

Many services available online and locally will repair your mobile phone, for a price. But if you have access to the parts and they"re inexpensive, why not perform the procedure yourself?

You should also consider the non-monetary costs: time spent without a phone, data that needs archiving from the device. Hopefully your mobile platform"s cloud service can help here, or perhaps a desktop utility can check the phone"s contents.

Fitting a new display that costs the same as a replacement phone is pointless. However, if replacing the mobile phone screen is closer to $15, it makes sense to have a go yourself.

The most obvious location for a replacement display is eBay. Simply searching for the mobile phone model and the word display will turn up the required parts. Just remember to shop safely when using eBay.

In my case, "nexus 5 display" returned a wealth of accurate (and, sadly, slightly inaccurate) results. Take the time to check that the component you choose is genuinely for your device. Often, components may appear in the results thanks to a poorly written listing.

Amazon is also a resource for replacement screens, but you should also consider a general Google search as this will turn up specialist suppliers who might be able to provide a lower price.

Note that you may find listings that offer just the display, versus listings with half the phone"s chassis. Which one you buy depends on how complicated you want things to get. For example, just the display means melting the adhesive using a heatgun or hairdryer.

Alternatively, a replacement display kit that includes half the phone"s body will require components being transferred from the old body into the replacement.

These tools are included to remove the case and unscrew any components that obstruct replacing the display. For example, a mobile phone will have Torx screws under the battery cover that will need removing before you gently prize the case apart.

Note that spending money on these tools isn"t totally necessary. Sanding off the ends of a couple of plastic bicycle wheel levers will produce usable alternatives---otherwise, they can be sourced relatively cheaply.

There are so many different mobile phone models on the market (either new or used) that providing a standardized guide is next to impossible. Additionally, some models cannot be repaired without sending them back to the manufacturer.

To begin, remove (where possible) the rear cover, battery and identify where the Torx (or standard) screws might be hidden. Look under labels and beside USB ports. You might find screws in the battery cavity if you have a device with a removable cell.

These are often threaded through the different layers of hardware within the phone. Ribbon cables are delicate; easily broken, take care as damage to these could change the dynamic of the repair considerably.

Persuading your phone"s display to part with the body isn"t usually difficult. Pushing through the camera hole against the glass to begin with, slowly prize the glass display away from the body.

In this case, you won"t need to remove the display, but you will need to remove components (and even the motherboard) from the damaged device into the new body.

Narrow rolls of replacement adhesive can be bought online. Have some double-sided sticky tape laying around? Cut this into narrow 1 mm slivers, then apply the adhesive to the phone"s frame, rather than the glass.

Apply light pressure where the display meets the adhesive. Take care not to put pressure on the middle of the glass display. Excessive force can break even the strongest Gorilla glass.

Reconnect the relevant cables, locking them down where necessary. Place the components back in the case with care, checking that there are no cables or screws left over. Test the phone to check that it works.

The moment of truth: does the new screen work? Remember, a touchscreen display has two purposes: touch interaction, and displaying the phone"s operating system.

However, it isn"t always plain sailing. I"ve fitted a replacement display that caused the phone to overheat. Therefore, it is important to buy components from reputable sellers, and ensure you"re buying the right parts for your phone.

Most importantly, don"t walk into performing such a repair without some device-specific research first. Video guides are particularly useful; once you"re ready, get hold of the right tools and surprise yourself!

Here"s another tech problem you can solve yourself with a bit of time and effort: phone display flickering. And if you drop your phone into the water, don"t panic, follow these tips to help save it.

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller"s listing for full details.See all condition definitionsopens in a new window or tab

No, the liquid damage service includes all parts and labor required to the get phone back to fully functional condition, but does not include liquid damage sensor replacement.

Due to its high cost, the logic board is the only part in the device that is not included in the liquid damage service. If the logic board has been irreversibly damaged, we will not be able to repair it and you will be refunded, minus the cost of return shipping if applicable.

It depends on the liquid. We reserve the right to decline liquid damage repair if the phone or device has been exposed to a liquid that may be hazardous in any way. Please call us at 1-877-320-2237 to inquire and make the proper arrangements.

Absolutely. Although salt water is corrosive and can be very damaging to electronic devices, we can still attempt to repair it. Our success rate on salt water damage is lower than that of a device that has been dropped in other liquid, but there is still a good chance that it can be repaired. If we cannot repair it, we will refund you the repair cost, minus the cost of return shipping if applicable.

First and foremost, do not attempt to turn the device on as that can cause a serious short circuit. Next, send the device in for our liquid damage service as soon as possible. The sooner we receive a liquid damaged device, the higher the chance we can repair it.

It is possible that a device can begin working normally on its own after liquid damage, but it is very uncommon. It is more likely that corrosion and residue deposits will begin to form on the logic board making the repair process more difficult. We recommend sending the device in as soon as possible, even if it is still wet. The sooner we receive a liquid damaged device, the higher the chance we can repairing it.

Probably. Even if only one function is not working, it could be caused by a variety of things. When a device has been liquid damaged, standard rules do not apply. This why we offer a liquid damage service specially tailored for liquid damaged devices.

Most liquid damage services are done in 45 minutes or less, depending on the level of damage. However, this estimate can vary depending on the extent of the damage to the logic board and other components.

If we are unable to repair your liquid damaged device for any reason, your payments will be refunded, minus the cost of return shipping if applicable, and your device will be returned. If your device could not be repaired and you do not want the device back or do not wish to pay for return shipping, please let us know and we will recycle the device at our repair facility.

Over the last decade or so, more and more of our interaction with our cars has been through a screen on the dashboard. The BMW screen -- the focal point of the iDrive navigation system -- lets you see vehicle information, navigation directions, messages and more. As time has gone on, the list of things you"ll find on the iDrive menu has increased, meaning more time spent staring at the dashboard display.

With the BMW iDrive screen being so important to your in-car experience, it"s worth getting to know a little more about it. So what types of BMW vivid screens are there? How do you protect and maintain it? And what aftermarket or OEM BMW screen upgrades and navigation screen replacements are available if you need it?

Like the screens on our phones, computers and TVs, BMW improves the screen technology in its central information display with each generation of vehicles. Compared to the screens in older models, today"s are larger and sharper, and often feature advanced features, like touchscreen control.

These screen improvements were quick to find their way to BMW"s premium models, but enthusiasts of the more mainstream vehicles often had a long wait to enjoy the latest and greatest features.

The screens in most modern BMWs stand upright from the top of the dashboard, but BMW has used a few different designs through the years. In many older vehicles, like the E65 7 Series or E60 5 Series, the screen was embedded in the dashboard itself. A small number of vehicles, like the E87 1 Series, even offered a flip up screen that could fold down into the top of the dash.

The most obvious change to BMW"s screens has been the size. The earliest iDrive screens were 6.5" -- roughly the same size as the largest iPhones or Samsung Notes. Making do with a screen the size of a phone had obvious consequences; cramped menus, poky navigation maps and a generally underwhelming experience were hallmarks of the early iDrive experience.

To remedy this, an improved BMW panoramic screen was available with higher-end navigation options. A size bump to 8.8" meant a lot more screen real estate. As these screens also took on a wide-screen aspect ratio, the space could be used more effectively. For example, iDrive split screen options allow using navigation and music side-by-side, for extra convenience.

More recently, BMW went on to introduce a larger 10.25" wide-screen display. Though initially reserved only for premium models, in the current generation it can be found in vehicles throughout BMW"s catalog. With more screen space than earlier versions, the 10.25" display is popular with people who make heavy use of their iDrive system, including CarPlay, video playback and other features.

The premium place previously occupied by the 10.25" has now been taken up by an even larger 12.3" screen, found in some of the latest vehicles like the G05 X5.

BMW has also added touchscreen control to its information displays in recent years. Like larger screens, these were first found in high-end models, but have since spread to more mainstream vehicles. Most of the latest generation have touchscreen control either as standard, or as an optional extra.

Our NBT Evo ID5/ID6 retrofit comes with a 8.8” or 10.25” BMW touch screen as an optional add-on for those vehicles that were equipped with an OEM touch screen from the factory. The 8.8” touch screen option may be available for F2x and F3x BMWs, while a 10.25” touch screen is on offer for F15, F16, G30 or G31 vehicles. Still, it’s always important to check your vehicle compatibility beforehand. Decode your VINhereand see if BMW touch screen could be an option for your car.

The latest BMW screen feature, gesture control, allows drivers to control select iDrive functions with the use of hand gestures captured by a 3D camera. If you’d like to activate it in your car, remember that only G-Series models are equipped with this function. Gesture control premiered in 2015 with the coming of the G11/G12 7 Series BMW, which included an NBT Evo ID6 iDrive, and nowadays can be found in almost every BMW with the newest MGU head unit.

Which screen you"ll have in your vehicle depends not only on what year it"s from, but also which model it is and what navigation option you have. Unsurprisingly, luxury models with premium navigation options are going to have bigger screens, and they"ll get extra features quicker.

In the 3 Series F30, for example, all vehicles with the basic Business navigation had the smaller 6.5" screen, while vehicles with Professional navigation system had the larger 8.8" screen. The only major change through the model run was the addition of touch screen control for the larger screen starting from the 2018 model year.

By 2018, the 7 Series had already had a touchscreen for two years, along with a larger 10.25" display. A 10.25" non-touchscreen display was also available in the F10 5 Series throughout production, starting in 2010. It would take the launch of the G20 3 Series in 2019 for fans of BMW"s more compact model to get the option of a similarly sized screen in their own cars.

If you’re preparing for an iDrive screen replacement you have several choices - either change it along with a full head unit replacement or get a standalone screen upgrade such as VividScreen or Panoramic Screen. See which option will suit you best.

No iDrive upgrade brings so much technology and convenience as this one.NBT Evo ID5/ID6 retrofit comes with loads of multimedia features already activated, like CarPlay,Video & Services in motion,BMW Apps, etc., and most importantly features a high-definition screen.

However, when retrofitting your BMW with a new iDrive system, it"s worth remembering that the screens available to you depend on your model, not the iDrive system you"re upgrading to. BimmerTech"sNBT Evo ID5/ID6 retrofit kitscome with 8.8" and 10.25" screens, either with or without touchscreen capability. Checking the screen(s) available for your vehicle is easy:

The fact that one iDrive system can potentially include a variety of different screen sizes sometimes means it"s possible to upgrade your screen size -- for example from 6.5" to 8.8" -- without changing any other hardware. OurPanoramic Screen retrofit for BMW F30et you step up your screen size without having to replace your whole iDrive system.

Up for a standalone BMW iDrive screen replacement? If you want to change your factory screen for one with twice or more the resolution, BimmerTech’sVividScreenandPanoramic Screen upgradeare the retrofits you can’t overlook. Both of those displays are, all in all, quite similar to each other, yet each of them comes with different kit components that fit separate technology upgrades.

The latest 8.8” 1280x480 BMW screen replacement provides noticeably better image quality compared to the factory screen, as it doubles or even triples its pixel density. Plus, it significantlyenhances the quality of the image and contrast while viewing. VividScreen is also designed to resemble the factory screen to perfectly match your BMW interior, so you shouldn’t worry about fitting it in the car. But what’s especially convenient about this BMW navigation screen replacement, is the fact that it comes with an inbuiltMultimedia Interface (MMI) module, which supports ourSmartView mirroring devicesand ourRear & Front View cameras. This means, if you’re compatible, you can get them all for a much lower price.

However, if you want to retrofit CarPlay in your BMW, VividScreen is NOT an option for you. The only screen matching ourCarPlay upgradeis a BMW Panoramic Screen upgrade.

OurPanoramic Screen upgrade, just like the VividScreen, packs a sharp 1280x480 display, OEM quality and spot-on integration with your BMW"s interior. It also comes in two screen sizes:

Although this BMW iDrive screen replacement doesn’t have it’s own MMI module, it will be a perfect fit for our CarPlay MMI Prime, if you want to add one. Pairing up the CarPlay retrofit with Panoramic Screen will enable you to use Apple CarPlay and Android Auto in full-screen, with a lot more space for your icons, messages and maps.

BMW Panoramic Screen installation will require some coding to optimize your iDrive for the bigger display, so right after you add it to your head unit remember to schedule a remote coding session with our BimmerTech technician. The session is included in the price of the retrofit.

If your iDrive screen is flickering or frozen, and no iDrive screen fixes are working, it could be necessary to replace it. If you do decide to, either because your iDrive screen is not working or you just want to change to a larger version, it"s one of the easier DIY projects you can do.

As the internal trim in each model differs, how to change your iDrive screen will depend on your vehicle. However, in general you will only need to remove the air vents below the display to allow access to the screws connecting the screen to the dashboard. With that done, the screen is attached with a simple wiring harness, which can easily be unplugged. Connecting the replacement is just as easy, and requires no soldering or wire cutting. The entire process can be completed in up to an hour.

When replacing your iDrive screen with a larger one, it"s important to remember the difference between the aspect ratio of the smaller 6.5" screen and the 8.8" or 10.25" wide-screen display. Without adjusting your iDrive, the picture on the screen will be stretched to fill the wider screen.

Depending on your vehicle and factory system, it may be possible to code your iDrive to correct the screen resolution and remove stretching. When possible, BimmerTech offers this service with all screen upgrades.

One advantage of having one of the bigger BMW iDrive screens is the possibility to use split-screen mode, to show two different things on the screen at once. For example, you might want your navigation directions on one side, with the current radio station on the other.

One time you might not want to split your screen is when using Apple CarPlay. In vehicles that support it, BMW uses a split-screen CarPlay interface by default, keeping a section on the right of the screen back for the iDrive system.

What this means in reality is just less space for your CarPlay interface, and as CarPlay makes it easy to toggle between navigation, music and messages, you might prefer to go all in on CarPlay.

In many vehicles it"s possible to unlock full-screen Apple CarPlay by coding your iDrive, which can be done via USB or in a coding session with a skilled technician. To find out how to code BMW CarPlay full-screen mode and whether it"s available for your vehicle, take a look at ourBMW iDrive coding options.

Coding is a great way to unlock other screen features, too. Activating the USB Video Player option makes it easy to watch videos on your iDrive screen, and with the Video in Motion option, your passengers will even be able to watch as you drive. For business rather than pleasure, you can also switch to showing full text messages on the dashboard display, or your choice from dozens more iDrive options.Learn more about BMW iDrive coding, and how it can help you put the growing screens in the latest vehicles to good use.

In some BMWs, you can even get videos, messages, navigation and more straight from your Android mobile phone. The Android Screen Mirroring feature lets you cast your phone"s display to your iDrive, and get your favorite apps on your BMW dashboard screen. In many of the latest vehicles, it"s available as a coding option from BimmerTech, and is just one way toconnect your mobile phone and iDrive system.

If coding an Android Screen Mirroring feature is not for you, there are some other ways you can add an iDrive screen mirroring functionality to your vehicle. Our screen mirroring retrofits will make it possible to have your phone content mirrored onto your head unit display, but also play videos from the most popular VOD platforms on your iDrive screen.

If you’re a loyal Apple owner and don’t plan on changing your iPhone for an Android supported system any time soon, you may find ourSmartView HD Apple TV3orSmartView HD Apple TV4a spot-on screen mirroring solution.These retrofits are also the only ones to enable video streaming from the most popular VOD platforms, such as Netflix, HBO, Hulu or Amazon Prime, and fit perfectly with our BMW VividScreen upgrade.

In case you’d like to mirror both Android and Apple devices,ourCarPlay MMI Prime retrofitwould be your go-to products, with the latter adding a whole new infotainment experience to your vehicle.

Current-generation iDrive screens are exposed, with a special coating to prevent damage and ensure good visibility in all light conditions. However, that does mean it"s important to take good care of the screen, to prevent scratches and other damage.

Even routine maintenance can cause problems if you don"t know how to clean the BMW iDrive screen properly. Repeated rubbing with a rough cloth or harsh chemicals can wear away the anti-glare coating or cause scratches. It"s important to always use a soft microfiber cloth when wiping your iDrive screen, along with distilled water or high-quality, dedicated screen cleaning solution.

Whether you"re looking to replace your iDrive screen, upgrade your hardware, or just make a few changes to help you make the most of your dashboard display, our expert team is on hand to help you find the right upgrades and retrofits for you.Get in touchand we"ll be happy to help.

Cracked or broken mobile device screens can be costly to fix, but a few inexpensive do-it-yourself strategies can eliminate a repair shop visit and salvage your tablet or phone.

Third-party repair shops typically replace glass on a tablet for about US$100-$200, depending on the model. Replacing the tablet’s touchscreen can cost $50-$75 extra.

Replacing the cracked glass with a functioning touchscreen is much cheaper. You usually can find suppliers online for $6 to $20 for a phone. A tablet replacement digitizer can cost about $50 or more if you perform the work.

It is relatively easy and cheap to replace the glass on a phone once you get the hang of it. Tablets are a bit more involved because of the larger size and added components.

Tools might require an additional monetary outlay if you do not have a well-functioning workbench. Depending on the device involved, you need a phone opener pry tool, little tweezers to deal with small cables inside, a Torx screwdriver, flat-head screwdriver and a precision screwdriver kit.

Add to that list either a variable hair dryer or a heat gun to soften glued phone parts. Also add scissors, double-sided adhesive tape, canned air and work gloves.

It is first things first when it comes to fixing cracks on a smartphone’s screen. Often, the actual screen is not cracked at all. You may have installed a glass screen protector when you purchased the phone.

The film covers can become cloudy or scratched. They usually help absorb shock from items dropping on the tablet to lessen risk of cracking the touchscreen glass under it.

When the culprit really is a damaged screen, choosing one of the next three approaches can help you solve the problem. You might be able to repair the damage rather than replace it.

For instance, is the screen clouded or otherwise damaged from your mistaken use of harsh cleaning fluids or coarse paper towels to clean the screen? If so, there is a fix for that.

Is the screen merely cracked or full-out broken — as in massive spider cracks from being smashed? You can cure a cracked screen on a phone or tablet more easily with Sugru, a commercial product. A fully cracked screen on either type of device is a solid candidate for a screen replacement.

If your phone or tablet screen shows signs of cleaning abuse or wear from heavy handling, return its condition to nearly new with an oleophobic coating kit. This is an oil-repellent coating that protects the screen, along with adding smoothness and reducing fingerprints.

The coating, a thin layer of fluoropolymer-based solids, is similar to Teflon and is bonded to the glass. You can buy the coating kit from a variety of electronic supply stores and online outlets.

Prepare a wiping finger. The oleophobic coating’s liquid solvent evaporates very quickly when applied, so once you start, work quickly. Wrap one finger with plastic wrap or a sandwich bag. Use this finger to rub the coating liquid onto the screen.

Apply 10-15 drops of the coating to the screen’s surface. If the phone or tablet screen has a large surface, apply 10 drops to a portion of the screen, working on one portion at a time.

Wipe the screen dry with a clean microfiber cloth. Then give the coating time to dry. Do not touch the screen for 8-12 hours to allow the coating to bond to the surface.

If your only complaint involves tiny scratches and cracks on a smartphone screen or a tablet glass, there are remedies that work with varying degrees of reliability. You can use a household eraser pad or an actual pencil eraser.

Pencil erasers also work reasonably well in making scratches disappear. Simply rub the scratch left and right with the eraser for about 60 seconds. Then rub it up and down for 60 seconds.

Does using toothpaste to fill in the cracks really work? I put that fix in the category of more “mythful” thinking, but I know people who swear that this method is a cheap fix that works.

Sugru is a moldable glue kit for repairing rather than replacing cracked screens. Actually, the product was not created with phone and tablet repairs in mind. Its intended purpose is more in the line of general repairs where bonding surfaces together and filling surfaces are needed.

Depending on how badly the screen is damaged, it can be a good solution for cracks that spread from the phone or tablet screen’s edges. However, for massive cracks that spread over the entire screen — as spider cracks tend to do over time — it will be a short-term fix at best.

If your phone or tablet screen has suffered more serious damage, full scale surgery is the only option other than getting a new device. Repairing the device’s LCD screen is a complicated procedure due to the compact internal design.

The repair process involves completely dismantling the phone or tablet’s outer casing. It is particularly easy if the replacement screen comes with a top frame.

Otherwise, you may have to seal the layers to avoid loss of structural strength and moisture/dust protection. You can use either sealing pads for the size of the particular device at hand or double-sided sticky tape. A simpler solution for phone screen replacement is to use B-7000/T-7000 glue.

Before you roll up your sleeves to get started, take one huge safety step. Buy and use a static wristband and a static guard mat. This will ensure against accidentally frying any electronic components while disassembling and reassembling the devices. Disconnecting the battery is not always a guarantee that static discharge will not happen.

The first step is to tear down the device so you can assess the extent of the damage and determine what screen parts to order. Locate the model number for the LCD screen. Use this number in an Internet search to find a replacement screen.

The part or model number usually is printed on a label adhered to the sensor cable attached to the screen. You can access this cable after you separate the screen from the rest of the unit. Carefully disconnect the cable connector from the backside of the screen along the edge.

Step 2: Loosen any stuck-on cabling that is now exposed, like the camera cable. Then remove cables if the clasps are exposed. These cables simply slide out of any exposed sockets after clasps are released. The tape-style cables are often held onto the frame and parts by adhesive, so tug gently to release.

Step 3: Unscrew the Phillips or Torx screws that hold the motherboard-containing back frame to the LCD-containing chassis and place the screws in a bowl for safe-keeping. Then separate the back frame from the chassis by gently and carefully pulling the two apart.

Step 4: Remove any further cable assemblies that have become exposed by the separation of parts. Maintain visual cues as to which cable to reattach where. For example, place them on the work surface face-up in the order of removal. Or take photos with a digital camera or smartphone.

Step 5: Remove the LCD-containing chassis from the front frame or bezel and glass assembly by unscrewing a second batch of screws. Store the second set of screws in a second bowl. Remove any further parts such as the camera.

Step 6: Don’t touch the LCD face. Separate the existing, damaged glass from the bezel or front frame by waving the heat gun over the adhesive join and pulling apart. Wear gloves here because the process involves further breaking the glass.

Tip: Be patient while the heat gun loosens the adhesive and be careful not to break the bezel or front frame while removing the glass. You need the bezel intact.

Step 1: Attach fresh two-sided tape to areas of the bezel that have lost their stickiness. Use the existing adhesive where possible. Do not allow tape to overlap the visual part of the glass.

Step 2: Look for any foam padding or seals and reattach. Do not touch the inside of the glass. You won’t be able to get rid of the fingerprints after assembly.

Step 3: Thread the digitizer cable and remount the new digitizer glass to the bezel by firmly pressing it into place. Then remove any dust from the LCD and glass with canned air.

You may have to assemble and disassemble a few times. The two sets of screws use similar holes. It is easy to insert the initial set of screws into the wrong holes. You will realize that only when the second set does not fit because you already used the hole.

Replacing damaged touchscreens and digitizer panels is not rocket science, but the process does require careful attention to details. Following visual guides and screenshots can make the difference between initial success and having to make second or third efforts.

Physical damageIf your device has physical damage, check with the manufacturer. Some manufacturers may exchange or repair your device. Or, if you have an AT&T Pre-Owned device that you bought online from us, and it has a cosmetic blemish, it might be covered.

Otherwise, if your device has any of these types of damage, it won’t be covered by the manufacturer’s warranty. If you return a device with any of these signs, we’ll charge you the total sales price of the replacement device. Plus, we’ll return your damaged device to you. See physical damage examples (PDF, 357KB)

Have an Apple® device? Go to Apple Support. Liquid damage to iPhones or iPods isn‘t covered by warranty. We don’t support warranty exchange of Apple products.

If you return a device with a liquid damage indicator that’s triggered, missing, or damaged, we’ll charge you the total sales price of the replacement device. We’ll also return your damaged device to you. See examples of liquid damage indicators (PDF, 208KB)

If it has physical or liquid damage and the device manufacturer won’t exchange or repair it, the damaged device isn’t covered by a warranty. You might be able to file a device protection claim or upgrade your phone or device.

Glass substrate with ITO electrodes. The shapes of these electrodes will determine the shapes that will appear when the LCD is switched ON. Vertical ridges etched on the surface are smooth.

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directly,backlight or reflector to produce images in color or monochrome.seven-segment displays, as in a digital clock, are all good examples of devices with these displays. They use the same basic technology, except that arbitrary images are made from a matrix of small pixels, while other displays have larger elements. LCDs can either be normally on (positive) or off (negative), depending on the polarizer arrangement. For example, a character positive LCD with a backlight will have black lettering on a background that is the color of the backlight, and a character negative LCD will have a black background with the letters being of the same color as the backlight. Optical filters are added to white on blue LCDs to give them their characteristic appearance.

LCDs are used in a wide range of applications, including LCD televisions, computer monitors, instrument panels, aircraft cockpit displays, and indoor and outdoor signage. Small LCD screens are common in LCD projectors and portable consumer devices such as digital cameras, watches, digital clocks, calculators, and mobile telephones, including smartphones. LCD screens are also used on consumer electronics products such as DVD players, video game devices and clocks. LCD screens have replaced heavy, bulky cathode-ray tube (CRT) displays in nearly all applications. LCD screens are available in a wider range of screen sizes than CRT and plasma displays, with LCD screens available in sizes ranging from tiny digital watches to very large television receivers. LCDs are slowly being replaced by OLEDs, which can be easily made into different shapes, and have a lower response time, wider color gamut, virtually infinite color contrast and viewing angles, lower weight for a given display size and a slimmer profile (because OLEDs use a single glass or plastic panel whereas LCDs use two glass panels; the thickness of the panels increases with size but the increase is more noticeable on LCDs) and potentially lower power consumption (as the display is only "on" where needed and there is no backlight). OLEDs, however, are more expensive for a given display size due to the very expensive electroluminescent materials or phosphors that they use. Also due to the use of phosphors, OLEDs suffer from screen burn-in and there is currently no way to recycle OLED displays, whereas LCD panels can be recycled, although the technology required to recycle LCDs is not yet widespread. Attempts to maintain the competitiveness of LCDs are quantum dot displays, marketed as SUHD, QLED or Triluminos, which are displays with blue LED backlighting and a Quantum-dot enhancement film (QDEF) that converts part of the blue light into red and green, offering similar performance to an OLED display at a lower price, but the quantum dot layer that gives these displays their characteristics can not yet be recycled.

Since LCD screens do not use phosphors, they rarely suffer image burn-in when a static image is displayed on a screen for a long time, e.g., the table frame for an airline flight schedule on an indoor sign. LCDs are, however, susceptible to image persistence.battery-powered electronic equipment more efficiently than a CRT can be. By 2008, annual sales of televisions with LCD screens exceeded sales of CRT units worldwide, and the CRT became obsolete for most purposes.

Each pixel of an LCD typically consists of a layer of molecules aligned between two transparent electrodes, often made of Indium-Tin oxide (ITO) and two polarizing filters (parallel and perpendicular polarizers), the axes of transmission of which are (in most of the cases) perpendicular to each other. Without the liquid crystal between the polarizing filters, light passing through the first filter would be blocked by the second (crossed) polarizer. Before an electric field is applied, the orientation of the liquid-crystal molecules is determined by the alignment at the surfaces of electrodes. In a twisted nematic (TN) device, the surface alignment directions at the two electrodes are perpendicular to each other, and so the molecules arrange themselves in a helical structure, or twist. This induces the rotation of the polarization of the incident light, and the device appears gray. If the applied voltage is large enough, the liquid crystal molecules in the center of the layer are almost completely untwisted and the polarization of the incident light is not rotated as it passes through the liquid crystal layer. This light will then be mainly polarized perpendicular to the second filter, and thus be blocked and the pixel will appear black. By controlling the voltage applied across the liquid crystal layer in each pixel, light can be allowed to pass through in varying amounts thus constituting different levels of gray.

The chemical formula of the liquid crystals used in LCDs may vary. Formulas may be patented.Sharp Corporation. The patent that covered that specific mixture expired.

Most color LCD systems use the same technique, with color filters used to generate red, green, and blue subpixels. The LCD color filters are made with a photolithography process on large glass sheets that are later glued with other glass sheets containing a TFT array, spacers and liquid crystal, creating several color LCDs that are then cut from one another and laminated with polarizer sheets. Red, green, blue and black photoresists (resists) are used. All resists contain a finely ground powdered pigment, with particles being just 40 nanometers across. The black resist is the first to be applied; this will create a black grid (known in the industry as a black matrix) that will separate red, green and blue subpixels from one another, increasing contrast ratios and preventing light from leaking from one subpixel onto other surrounding subpixels.Super-twisted nematic LCD, where the variable twist between tighter-spaced plates causes a varying double refraction birefringence, thus changing the hue.

LCD in a Texas Instruments calculator with top polarizer removed from device and placed on top, such that the top and bottom polarizers are perpendicular. As a result, the colors are inverted.

The optical effect of a TN device in the voltage-on state is far less dependent on variations in the device thickness than that in the voltage-off state. Because of this, TN displays with low information content and no backlighting are usually operated between crossed polarizers such that they appear bright with no voltage (the eye is much more sensitive to variations in the dark state than the bright state). As most of 2010-era LCDs are used in television sets, monitors and smartphones, they have high-resolution matrix arrays of pixels to display arbitrary images using backlighting with a dark background. When no image is displayed, different arrangements are used. For this purpose, TN LCDs are operated between parallel polarizers, whereas IPS LCDs feature crossed polarizers. In many applications IPS LCDs have replaced TN LCDs, particularly in smartphones. Both the liquid crystal material and the alignment layer material contain ionic compounds. If an electric field of one particular polarity is applied for a long period of time, this ionic material is attracted to the surfaces and degrades the device performance. This is avoided either by applying an alternating current or by reversing the polarity of the electric field as the device is addressed (the response of the liquid crystal layer is identical, regardless of the polarity of the applied field).