singer xl 580 lcd panel free sample

There are now several versions of the software for SINGER® Futura™ and AutoPunch available on the market. The most current is version 1.0.0.2. To determine what version of either software you have, you will find this information around the inside rim of the CD at approximately 4 o"clock. Before loading AutoPunch into your computer, check the version and then follow the steps below.

Instruction hints and tips for the Singer Futura by Jenny’s Sewing Studio is here!I have gathered my best observations and sage wisdom on the Singer Futura embroidery machine and placed it here for you to refer to. I will update the page from time to time as I learn a new technique…yes I am always learning! I hope it helps you have a successful sewing and embroidery experience with the machine. I have enjoyed hours of fun and achieved many embroidery projects and my best advise when having a problem is to stop, look and listen to the machine. It will tell you what is wrong if you are there to listen.

If the program included with the Futura is on a CD then it must be installed via the CD. You will have to purchase a CD reader if you do not have the drive. Compucon says you cannot move the program to a USB stick. You also must use the Futura that was intended for the software. If you install a more recent software on you computer and plug in an older futura you will loose a lot of the software and option features not intended for the machine you are using. ( some newer Futura now come with the program on a USB.. XL580, XL420)

If you want to switch from the small hoop to the large hoop….SINGER® FUTURA™ machines report the hoop attached to the computer only one time, when the SINGER® Futura™ program is started. If there is no hoop attached the program will assume that the large hoop is mounted. So, if a user decides to use a different hoop than the one the machine has detected, it is necessary to change the program’s setting before embroidering. However, there is a correct procedure/sequence to set up the SINGER® Futura™ machines for embroidery. Preparing to embroider out of sequence will cause the computer to display an Error Message if the small hoop is used: The proper way to set up for embroidery on the SINGER® Futura™ machines is as follows:

4. If the Large Hoop is on the SINGER® Futura™ machine, but it is desired to change to the Small Hoop, remove the Large Hoop and replace with Small Hoop. However, before selecting a design, it is necessary to go to the Main Menu and select Tools>Select Hoop, then choose Small Hoop. (The same is true for moving from Small Hoop to Large Hoop, once the program has been opened).

* Options for the CE150, 250, 350, SES 2000 will not work in the XL400, SEQS600 or other newer Futura models. 4. The new Quintet has it’s own software package to work with the endless hoop. The endless hoop is not available on any other model at this time.

For Creativity that Knows No Limits! The SINGER Futura XL-580 embroidery and sewing machine includes innovative features that allow you to do more than ever before. With an endless hoop, knee lifter for hands-free presser foot lifting, extra-large sewing space for quilting and 250 built-in embroidery designs – including 50 endless designs – it’s just what you need to make your sewing creativity truly limitless. you"re embroidering.

With a price tag of around $1000, the Singer Futura XL-580 is a high-end sewing and embroidery machine. Although it’s a computerized model and packed with high-end features, the XL-580 is entirely suited to both beginners and more experienced sewers. Not only that but, since it comes with both sewing and embroidery features, it will help you save up on your expenses since you simply need to buy one machine, instead of two different ones. You can also use the machine to work on different types of projects designed for both home and business purposes.

The Singer XL-580 is extremely simple to use- which is quite surprising considering its extended range of features. It includes various types of features that will help you easily find your way around the machine while exploring its different options. For example, it is equipped with an automatic needle threader that will enable you to simplify the task at hand: therefore, you only have to touch the backlit LCD screen to automatically inch the thread through the eye of the needle. Similarly, sewers can also swipe their finger across the LCD screen to automatically adjust the machine’s tension setting. The screen can even be used to adjust the needle position and hence use it for appliques, pivoting and other similar stitch placement angles.

To enhance your comfort, it even includes an automatic bobbin thread pick-up feature. This largely simplifies and speeds up the sewing process. The machine comes with a clear cover designed to help users see the bobbin supply, hence allowing you to avoid snags and snares. Users who prefer to do their sewing at night will be thrilled to learn that the work area is equipped with six LED lights to provide you with optimal viewing. Thanks to the multi-hoop capacity, you can create smaller or larger-than-average designs. If you want to personalize your home accents, you can also make the most out of the XL580’s 20 fonts with outline lettering to print large bold letters on just about any type of fabric that you want.

With a heavy-duty metal frame, the Singer Futura XL-580 can easily be used on an everyday basis. Thanks to its wide array of features, it’s great for both embroidery and regular sewing, which makes it an amazing investment. Granted, it can be a bit tricky to be switching from sewing mode to embroidery mode on a regular basis, thus users that already own a good sewing machine might be better served by an embroidery-only model such as the Brother PE770 and the Janome MC300E, though they’re not packed with nearly as many embroidery designs as the XL-580.

For some of the sewers, it’s hard to look for the best embroidery machines which must be in the budget and efficient in performance as well. Today in this review about the best Singer embroidery machines, you will be able to make a decision.Top 5 Best Singer Embroidery Machines:

No matter if you are looking for a beginner level machine or expert level, you are going to have everything here. We are about to list the best Singer embroidery machines to simplify your work and so you can enjoy every bit of your creativity.

From tablecloths to draperies or fashionable clothes to printing tasks, SINGER XL-580 Futura embroidery machine can do all such tasks with smoothness.

Singer Futura XL-580 is among the best embroidery sewing machines which have the ability to provide everything at the best quality. The creative and innovative features of the machine will make you always go for this one.

SINGER SE340 comes with a sleek design that offers 250 built-in stitches, 6 alphabet options, 200 embroidery designs and a USB stick embroidery design transfer.

This stylish embroidery and sewing machine is just not going to help you in completing the work as fast as possible but it will also help you in winding up the project quickly. The easily adjusted LCD screen will help you in reviewing the work and edit it before applying.

Besides this minor fault, the SINGER SE340 sewing and embroidery machine is ideal for different sewing purposes and durable enough to serve for home stitching project over a long time span.

This sewing and embroidery machine Singer SE340 is the best choice for advanced sewers. People who want something extraordinary from the machine, then this is the best pick up for them. The advanced features will make you go addict to this machine.

The most exciting thing about the Singer embroidery machines is how easily they amalgamate the technological brilliance with creativity and a prime example of this feat is the

The Singer embroidery machine has 125 embroidery designs and 30 built-in stitches. It has five different fonts and outline lettering as well. The automatic needle threader has made things much easier and effortless.

Futura XL-400 comes with a warranty period of 25 years which makes this product superior as compared to other similar products that are available in the market.

If you are looking for the best budget embroidery machine then your choice must be Singer Future XL-400. For the beginners, this sewing and embroidery machine is an ideal match for all the working needs.

Singer Futura XL-550 is the answer to all your questions related to the embroidery or sewing. No matter if your project is big or small, this machine is going to support the whole project with the help of amazing and easy to use features.

Singer XL-420 sewing and embroidery machine has the ability to deal with the basic editing of all the designs and just by one click you can send the design to the machine.

The Singer Futura XL-420 is an amazing choice for everyone who needs a user-friendly machine and it has everything you were looking for. From the basic to the advanced features, you can have anything in this machine to simplify the work.

These best Singer embroidery machine reviews are based on performance and customers satisfaction. At the time of attempting embroidery, no matter for the practice or for the professional purpose, you must have a great and efficient machine on the table. Without a proper machine, this is not possible to achieve the desired and high-end results.

The wide sewing field is the area that can be four to 14 inches wide. The wider the sewing field, the more hat designs you can put.Many embroidery machines come with LCDs that allow you to move your design on theembroidery fabricwith utmost ease.

This multi-purpose machine is used for both embroidery and sewing projects.The great LCD screen allows you to control the embroidery process, and it is light so that you can also use it at night.

The singer is a popular hat embroidery machine suppliers and manufacturer. If you’re looking for the perfect embroidery machine for hats and shirts, the Singer Futura XL-580 machine is perfect.

Some of the best features of the EverSewn Hero – 400 Stitch embroidery machine include an automotive needle threader,automatic bobbin thread levels, and eight different presser feet. The machine’s control panel has a simple and easy-to-control LED screen.

Do you want to create unique designs? Choose Singer 9960 Quantum Sewing machine. This embroidery machine features 600 built-in stitches, 13 automatic one-step buttonholes, and five alphanumeric fonts.

It features a large LCD screen, preset stitch length/width settings, and easy threading to help you customize your desired specification. It is a must-haveembroidery machinefor all quilters and crafters.

When you are in the market looking for a professional embroidery machine, then don’t forget to consider the Singer 9960 Quantum embroidery machine’s unique features.

For sewists looking for a budget friendly machine that combines regular stitching with embroidery, the Brother SE400 is the perfect option. It"s easy to use, with a back-lit LCD screen on which to preview your designs. It comes pre-loaded with 70 embroidery designs in addition to more than 60 stitches for regular sewing projects, plus the ability to download more. The embroidery area is smaller than dedicated embroidery machines—4x4"—but with its versatile capabilities, it"s a great all-around machine for frequent sewists.

This machine has a whole range of features that serious embroiderers will love, but even better, it"s not limited to just embroidery! With 30 utility stitches, including automated buttonholes, the Futura XL-400 will be able to tackle all the sewing projects you can throw at it, and embroider them too! The embroidery area allows for designs up to 18.5 x 11 inches; like all high-end embroidery machines, it has easy USB import options, so you can add and combine designs to create custom works of art. It"s not best for beginners, however; not only does it have a sizeable price tag, but it"s more complex to use than a regular sewing machine. Unlike many embroidery machines, it does not use a view screen, so there"s no way to view your work in progress, a step most beginners appreciate. If you"re experience with machine embroider and looking to upgrade your current combination machine, or downsizing from a dedicated embroidery machine to something that can handle all of your sewing needs, this might be just the option you"re looking for.

The Singer Superb EM200 is an excellent intermediate machine, typically recommended for sewists who have some experience with machine embroidery, but who may be looking for a step up from a basic machine. The EM200 offers a larger embroidery area (almost 8 inches on a side) and a top sewing speed of 700 stitches per minute! It"s designed to handle embroidery on all kinds of fabrics, from thick terry cloth towels to delicate cotton baby clothes. An LCD touchscreen makes it easy to select your embroidery designs, including those downloaded from other sources. A sensor in the machine monitors your upper thread and alerts you if it runs low or breaks, which is particularly handy when working complex embroidery designs.

Similar to the Futura XL-400, this machine is an upgrade in several ways. In addition the more standard hoop sizes that come with your machine, the Futura XL-580 features an "endless hoop," which allows you to create continuous border patterns without the hassle of re-hooping your project and potentially throwing your border out of alignment. It also comes with software that, among other features, allows you to convert fonts on your computer into embroidery designs, making the possibilities almost endless. Keep in mind that there"s no in-progress editing; this machine doesn"t include a display screen, so all edits need to be done on a computer before beginning your project. Like other Futura machines, the XL-580 features one of the largest embroidery areas available. Designed for the serious embroiderer, it"s one of the few combination utility/embroidery machines that can stand up to use for a small business, and with a limited 25 year warranty, you can be confident that this machine will keep up with you for a good long while.

The a7 IV uses the same NP-FZ100 battery as the a7 III and other more recent Sony cameras. It"s a usefully hefty unit that, combined with the relatively modest viewfinder res, lets the a7 IV achieve a CIPA battery life rating of 580 shots per charge using the rear screen and 520 shots per charge using the EVF.

The easy-to-see back-lit touch screen LCD display and one-touch automatic thread cutter both make this machine even easier and more convenient to use for tailoring as well as being a fantastic budget buy.

With a whopping 125 designs built-in , 30 built-in stitches, 5 fonts, and 2 fully automatic buttonholes, the SINGER brand has made sure you won’t run out of new and interesting things to do for a very long time.

With a limited warranty, ranging from 1 year to 25 years depending on the portion of the machine that dysfunctions, I still feel there’s plenty of time to sort out if you got a good machine or a bad. The reviews seem to be mostly bad luck and it shouldn’t take long to see if you’re one of the unlucky ones. The SINGER brand has traditionally produced an exceedingly quality product so there’s little to worry about. If that’s the case, simply use that warranty to get a new one and enjoy the fantastic deal.

SINGER thought outside the box on this one, and took into consideration things that other manufacturers have never thought to. A sewing machine is not the only piece of equipment its owner values and needs in good working order, and it can affect the performance of electronics in its environment simply due to the nature of its operation. Dust and lint are big enemies of electronics and SINGER has finally taken note f it to make it the best sewing and embroidery machine out there.

Other reviewers don’t seem to appreciate this machine too much, and I can understand why due to the inflexibility of the computer interface. If I buy a machine today, and it requires hook-up to a computer, I kind of expect it to be able to USE a computer from the last five years. This one won’t do that. SINGER has really dropped the ball in this respect.

The fact this machine MUST be hooked to a computer is indeed its biggest downfall. If this wasn’t the case, the lack of software update would mean very little. However, I expect to make a purchase that can be utilized. Now, not with a time machine to the past. It wouldn’t be difficult to update this and repair the flaw. Keep an eye out at SINGER for this to happen, then jump on it.

If SINGER could find it in them to lower their cost just a little, bring this machine away from the 4 figure mark, I would feel entirely differently and would be telling everyone I know to go buy one. I greatly enjoyed the design choices and work-space size, and no one can scoff at the warranty, but I think the pricing was a little ambitious.

A clear LCD screen makes choosing options easy and intuitive, contributing to the general feel of this being an easy machine to use. There are 8 presser feet for the people who need just the right one to sew properly. We understand, it’s a very personal thing.

I purchased my Singer Futura XL-550 in September 2014, but only after doing a great deal of research by reading 100’s of pro’s and con’s on the XL-400 and XL-550. The biggest complaint about the Futura was thread problems & breaking needles which I figured was operator error, that they made a mistake and blamed it on the machine. But I started having these problems right away; in the first 10 minutes I had 5 or 6 bird’s nests and that happened while I was just trying out the Futura as a sewing machine. And while trying to embroider something I broke my first needle within 2 minutes and 5 more needles in the first hour. I also had problems with the large hoop. It just would not hold the fabric in place and I was not able to embroider a simple pattern that came with the machine. Also, I would get this error message “wrong size hoop installed” about a minute after I started an embroidery project. After all the research I did, to say I was pissed is putting it mildly. I was ready to take an ax to this “machine” (I won’t write down what I really said about this machine). It turns out that my first assumption about it being operator error was wrong, and I want to APOLOGIZE to everyone that post their problems; the ones that I did not believe. I was feeling like an idiot for buying this piece of junk and that old saying of “if it’s too good to be true” is right, this Singer Futura is a real problem.

Singer at one time stood for QUALITY, but lately Singer’s quality SUCKS. By making their machines oversea in places like Vietnam and others, the new owners of Singer Company appear not care about their quality control because it is not there. And YES, there is a learning curve to all new equipment, but it’s hard to learn how to use the machine when it has so many problems that are clearly out of the operator’s control. The Futura XL-550 sewing abilities are okay, but the embroidery part has problems, and I bought this machine to do embroidery. If the manufacture had tighter quality controls, people would not be having these problems. After trying to get my Futura to work, I found a number of problems with it. And in time I came up with some modifications that I used to repair my Futura. I took each problem one at a time and broke it down, and I was able to find the reason for each problem and then I worked out a solution for each problem.

I found that my Futura was having 5 major problems that had to be worked out if I was ever going to be able to embroider anything. Here are the 5 problems I was having: 1. Birds nest in the bobbin case, 2. Breaking needles, 3. Large hoop problem, 4. Wrong size hoop, and 5. Machine would stop over and over on a new project. These are the problems I was having with my Singer Futura XL-550, now for the modification.

The modification I made to my Singer Futura XL-550 has improved its abilities by eliminating the birds nest in the bobbin holder area and stopped the needles from breaking. And what I had to do to fix the problem with the large hoop. I had to deal with these problems and here is the list of problems and the modifications I made to fix them:

Within 1 hour of using the Futura XL-550 embroidery part I broke 6 needles, the first needle was in the first two minutes. What I found was the needle was hitting the edge of the bobbin cover plate. The needle was hitting the edge about 1/32 to 1/16 of an inch above and below the needle slot.

The large hoop was not holding the material while I was running an embroidery design. And believe me I tried everything to get the hoop to hold the material, I even hand stitched the material in the hoop to help the hoop hold the material, but it didn’t work. I used the Futura customer help website to get some help with the large hoop. After waiting on hold for over and hour the person in Customer support gave me the "RUN AROUND" about “are you making sure that the hoop is tight and the material makes a drum sound. Is the notch & grove lined up“ and stuff like that. I told them the hoop was to thin and to flexible to hold the material and that I wanted it replaced. And that only happened after I sent them a picture of the hoop with the material hand stitched into the hoop. They also told me that the hoop replacement they will be sending me is the same as the one that came with my Futura XL-550. Well, after three weeks of waiting the replacement hoop finally showed up. This replacement hoop was not the same, so they lied to me about the replacement hoop. That replacement hoop was about a half an inch longer on the long side and overall was about 1/16 to 1/8 of an inch thicker then the one that came with the machine. But even with these differences in size the replacement hoop still did not hold the material tight enough; it would slip out just enough to mess up the design.

Solution: Before you try to embroider that project you just modified, you have to save it (use a new name for that modified project). After you have saved it turn off the Futura XL-550 and close down the software. After you do that, restart the Futura machine and the software, you have to do this to clear out any software problems. You can re-open your saved project and send it to the machine. I know it’s a problem to do that every time you make a modification to a design, but it’s the only way I have found to get around this problem.

The Futura XL-550 “OUT OF THE BOX” gets an overall rating of 1 stars, that"s only because Amazon will not let you give a zero star rating. The sewing machine part is okay and gets 3 stars, but the sewing machine is not why I bought this machine in the first place; I bought this Futura for its embroidering abilities and that part gets a minus 1 stars. I know that many of you are having problems with your Futura and YES “OUT OF THE BOX” it should work without any problems. Don’t give up, most of these machine can be fixed with a little work (and YES, Singer should pay for all the shipping to get it fixed), but they won’t do that. But, after I made the modification to my XL-550 I have enjoyed embroidering custom patches for my Karate Studio and making gifts for friends and family. So, after ALL the modifications to my Futura “My Modified Singer Futura XL-550” gets an overall 4 stars, I reduced the score by a half stars because it is a very noisy machine and another half star because you have to watch the Futura throughout the embroidery project. I came up with these fixes to solve the problems I was having, and I hope this helps you.

UPDATE: I found a service manual for my XL-550 online, and believe me you need this service manual. I use my Futura a great deal, so every 3 or 4 months I clean and lubricate it and adjust the X-Y axis points on the