universal mount tft lcd flat panel monitor user manual supplier

This unit features a widescreen high-resolution 9.2-Inch TFT LCD display with beautiful color and crystal clear video. The low-voltage in-wall mountable screen is an excellent low cost solution for constructing and developing scalable security monitoring and video surveillance systems.

Light-weight, streamline and versatile, this unit can be installed almost anywhere in your home. The built-in mounting bracket will allow you to setup in-wall and in-panel applications so the unit sits flush where installed. The decorative trim cover plate protects the screen and conceals any screws and can be painted to provide a truly custom touch to your setup. Adds entertainment and appeal to any room in the house.

This unit is great for security monitoring and video surveillance systems. Create your own security center and protect yourself and loved ones. Setup cameras and keep an eye on the car in the driveway or make sure the baby is sleeping comfortably --all while you watch the monitor from your kitchen table!

Unlock more entertainment possibilities when you use the video inputs to connect devices like an additional monitor, computer, video game console, etc. Unit comes equipped with a total of 3 video inputs, two RCA and one VGA, all of which can be connected simultaneously and selected independently.

Control the system by using the wired remote control or use the fully functional wireless remote control. The wireless infrared remote control features power, menu, mode, and video input selections, making it easy to control an array of monitors. The infrared receiver can be mounted away from the monitor itself, making it even more convenient to control multiple monitors.

Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Maintenance Guidelines

Using the Front Panel Controls Using the On-Screen Display (OSD) Setting the Optimal Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and Vertical Extension Rotating the monitor Adjusting the Rotation Settings of Your Operating System

DellTM 1908WFP Flat Panel Monitor User"s Guide Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Maintenance Guidelines

The 1908WFP flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: 19-inch wide (482.6 mm) viewable area display. 1440 x 900 resolution, plus full-screen support for lower resolutions. Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side. Tilt, swivel, vertical extension and rotate adjustment capabilities. Removable pedestal and VESA 100 mm mounting holes for flexible mounting solutions. Plug and play capability if supported by your system. On-Screen Display (OSD) adjustments for ease of set-up and screen optimization. Software and documentation CD includes an information file (INF), Image color Matching File (ICM), and product documentation. Energy Saver feature for Energy Star compliance. Security lock slot. Asset Control.

attached base plate) 2 Barcode serial number label 3 Security lock slot 4 Dell Soundbar mounting brackets 5 Regulatory rating label 6 Stand removal button 7 Cable holder 8 Lock down/release button

Refer to this label if you need to contact Dell for technical support. Use a security lock with the slot to help secure your monitor. Attach the optional Dell Soundbar. Lists the regulatory approvals. Press to release the stand. Helps organize cables by placing them in the holder. Push the monitor down, press the button to unlock the monitor, and then lift the monitor to the desired height.

If you have VESA"s DPMTM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The following table shows the power consumption and signaling of this automatic power saving feature:

Activate the computer and the monitor to gain access to the OSD. This monitor is ENERGY STAR�-compliant as well as TCO "99 / TCO "03 power management compatible. * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

NOTE: The USB interface of the monitor works ONLY when monitor is powered ON (or in Power Save Mode). Switching your monitor OFF and then ON would re-enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality.

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.

15-pin D-subminiature, blue connector; DVI-D, white connector Digital: Detachable, DVI-D, Solid pins, shipped detached from the monitor Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor 12.54 inches (318.60 mm) 17.27 inches (438.60 mm) 17.43 inches (442.75 mm) 7.38 inches (187.41 mm)

CAUTION: Read and follow the safety instructions before cleaning the monitor. CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics. If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor. Handle your monitor with care as darker-colored monitor may scratch and show white scuff marks more than lighter-colored monitor. To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.

DellTM 1908WFP Flat Panel Monitor User"s Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar (optional) Removing the Stand

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions. file:///T|/htdocs/monitors/1908WFP/en/ug/setup.htm[10/31/2012 11:33:48 AM]

1. Turn off your computer and disconnect the power cable. 2. Connect either the white DVI or blue VGA cables to the connectors on the computer and the monitor. 3. Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to the

computer and the monitor, you can use the USB connectors on the monitor. 4. Connect any USB devices. file:///T|/htdocs/monitors/1908WFP/en/ug/setup.htm[10/31/2012 11:33:48 AM]

Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User"s Guide 5. Connect the power cables. 6. Turn on your monitor and computer. If you do not see an image, push the input select button and ensure the correct input source is selected. If you still do not see an image, see Troubleshooting your monitor.

After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable slot to neatly organize all cables as shown above.

1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Plug in the power cord from the Soundbar in to the connector on the back of the monitor. 4. Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer"s audio output jack. file:///T|/htdocs/monitors/1908WFP/en/ug/setup.htm[10/31/2012 11:33:48 AM]

Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User"s Guide NOTE: Do not use with any device other than Dell Soundbar. NOTICE: Soundbar Power Connector - 12V DC output is for optional Dell Soundbar only.

NOTICE: After placing the monitor panel on soft cloth or cushion, complete the following steps to remove the stand. 1. Rotate the stand to allow access to the stand release button. 2. Press the Stand release button and lift up the Stand and away from the monitor . Back to Contents Page

DellTM 1908WFP Flat Panel Monitor User"s Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Optimal Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and Vertical Extension Rotating the monitor Adjusting the Rotation Display Settings of Your System

NOTE: The floating "Dell Self-test Feature Check" dialog appears on a black background if the monitor cannot sense a video signal. Depending upon the selected input, one of the dialogs shown below will scroll continually.

Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the monitor self-adjusts to the current input:

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

2. Press the - and + buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table below for a complete list of all the options available for the monitor. 3. Press the MENU button once to activate the highlighted option. 4. Press - and + button to select the desired parameter.

Contrast adjusts the degree of difference between darkness and lightness on the monitor screen. Press the + button to increase the contrast and press the - button to decrease the contrast (min 0 ~ max 100).

Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.

Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or DVI cable. Choose the YPbPr option if monitor is connected to a DVD by a YPbPr to VGA or YPbPr to DVI cable or if the DVD color output setting is not RGB.

You can choose Graphics or Video according to what signal input. If PC connect to your monitor,please choose Graphics; if DVD or STB or VCR connected to your monitor,Video is recommended.

If you view media application like photo, clip etc via PC, choose "Multimedia" preset; If you play a game in PC, choose "Gaming" preset; If you prefer a lower color temperature (5700K), choose "Warm" preset; If you prefer a higher color temperature, choose "Cool" preset; Custom(R, G, B) Preset offers a range of 6500K colors; Choose "Desktop" to utilize the panel native color format; Select Warm (Red) preset for a reddish tint. This color setting is used for color-intensive applications (photograph image editing, multimedia, movies, etc.) Select Cool (Blue) preset for a bluish tint. This color setting is used for text based applications (spreadsheets, programming, text editors, etc.) Select Custom preset to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from 0 to 100.

To adjust the horizontal position of the Image, use the - and + buttons, and move Image to the left and right. To adjust the vertical position of the Image, use the - and + buttons, and move Image down and up. This feature will help you to adjust character definition. Use the - and + buttons to make adjustments from 0~100. The Phase and Pixel Clock adjustments allow you to finely adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting Display Settings. Use the - and + buttons to make adjustments (Minimum: 0 ~ Maximum: 100). If satisfactory results are not obtained using the Phase adjustment, use Pixel Clock (Coarse) and then use Phase (fine), again. NOTE: This function may change the width of the display image. Use the Horizontal function of the Position menu to center the display image on the screen.

Select this option to adjust the settings of the OSD, such as, the location of the OSD, the amount of time the menu remains on screen, and the rotation of the OSD, and so on.

The OSD stays active for as long as it is in use. Adjusting the hold time, sets the length of time the OSD remains active after the last time you pressed a button. Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds. Controls user access to adjustments. When Yes (+) is selected, no user adjustments are allowed. All buttons are locked except the menu button. NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with

Display Data Channel/Command Interface- allows you to adjust the monitor parameters (brightness, color, balance, etc.) via software applications on your PC.

You can disable this feature by selecting "Disable". For best user experience and optimum performance of your monitor, keep this feature enabled. NOTE:If user select "disable" for DDC/CI,the warning message will appear on screen.Then user can select Yes or No according to need.

Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User"s Guide Resets the OSD menu options to the factory preset values. Reset All Setings: Changes all the user-adjustable settings including color, position, brightness, contrast, menu transparency, and OSD hold time to the factory defaults. The language of the OSD does not change.

Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User"s Guide This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1440 X 900 @ 60Hz. NOTE: The floating Dell Self-test Feature Check dialog appears on-screen if the monitor cannot sense a video signal.

Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer. When monitor enters Power Save mode, the following message appears:

The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a blue LED for power indication, and two audio headset jacks.

You can adjust the stand vertically, up to 4.72 inches (120mm) using the stand lock/release button. You can adjust the monitor to the desired position by sliding the monitor up and down the Stand.

NOTE: If locked in the down position, 1. push the monitor down. 2. press the Lock down/release button on the bottom rear of stand to unlock the monitor. 3. Lift the monitor up and extend the stand to the desired height.

Before you rotate the monitor, your monitor should either be vertically extended (Vertical Extension) or titled (Tilt) to avoid hitting the bottom edge of the monitor.

NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To download the graphics driver, go to support.dell.com and see the Download section for Video Drivers for latest driver updates. NOTE: When in Portrait View Mode, you may experience performance degradation in graphic-intensive applications (3D Gaming etc.)

After you have rotated your monitor, you need to complete the procedure below to rotate your operating system. NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating your operating system.

DellTM 1908WFP Flat Panel Monitor User"s Guide Troubleshooting Your Monitor General Problems Product Specific Problems Universal Serial Bus Specific Problems DellTM Soundbar Troubleshooting

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

1. Turn off both your computer and monitor. 2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue connector) cables from the

The floating "Dell Self-test Feature Check" dialog box should appear on-screen on a black background if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.

4. This box also appears during normal system operation if the video cable becomes disconnected or damaged. 5. Turn off your monitor and reconnect the video cable, then turn on both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system; your monitor is functioning properly.

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1440 X 900 @ 60Hz.

Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer or that the monitor is in a power save mode.

Check connection integrity at the both ends of the video cable, verify that the monitor and computer are plugged into a working electrical outlet, and that you have pressed the power button.

Press the input select button in the front of the monitor and ensure the correct input source is selected. Increase brightness & contrast controls. Perform monitor self-test feature check. Check for bent or broken pins on the end of the video cable. Reboot your computer and monitor.

Push Auto Adjust button. Adjust Phase and Clock controls via OSD. Eliminate video extension cables. Perform monitor reset. Lower video resolution or increase font size.

Perform monitor reset. Push Auto Adjust button. Adjust Phase and Clock controls via OSD. Perform monitor self-test feature check and determine if these lines are also in self-test mode. Check for bent or broken pins.

Perform monitor reset. Push Auto Adjust button. Adjust Phase and Clock controls via OSD. Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode. Check for bent or broken pins. Boot up in the "safe mode".

Ensure monitor is in proper video mode. Ensure video cable connection to computer and to the flat panel is secure. Perform monitor reset. Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.

Use the Power Management feature to turn off the monitor at all times when not in use. Alternatively, use a dynamically changing screensaver left on the monitor for a long period of time.

Check that your monitor is turned ON. Reconnect the upstream cable to your computer. Reconnect the USB peripherals (downstream connector). Switch off and then turn on the monitor again.

Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the power indicator (green LED) on the front of the Soundbar is illuminated. Confirm that the power cable from the Soundbar is plugged into the monitor. Confirm that the monitor has power. If the monitor has no power, see Troubleshooting your monitor for monitor common problem.

Clear any obstructions between the Soundbar and the user. Confirm that the audio line-in plug is completely inserted into the jack of the sound card. Set all Windows volume controls to their midpoints. Decrease the volume of the audio application. Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting. Clean and reseat the audio line-in plug. Troubleshoot the computer"s sound card. Test the Soundbar using another audio source (i.e. portable CD player).

Clear any obstructions between the Soundbar and the user. Confirm that the audio line-in plug is completely inserted into the jack of the audio source. Decrease the volume of the audio source. Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting. Clean and reseat the audio line-in plug.

Clear any obstructions between the Soundbar and the user. Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio source. Set all Windows audio balance controls (L-R) to their midpoints. Clean and reseat the audio line-in plug. Troubleshoot the computer"s sound card. Test the Soundbar using another audio source (i.e. portable CD player).

Clear any obstructions between the Soundbar and the user. Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting. Set all Windows volume controls to their maximum. Increase the volume of the audio application. Test the Soundbar using another audio source (i.e. portable CD player).

DellTM 1908WFP Flat Panel Monitor User"s Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell Your Monitor Setup Guide

FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer"s instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.