iphone 4s lcd touch screen factory

The iPhone 4S screen replacement includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair.

Replace a cracked or scratched front glass panel or malfunctioning LCD display on your iPhone 4S. A new screen and digitizer assembly will renew the appearance of your front panel and restore touch function, and eliminate the dead pixels or flickering on an aging display.

Is the screen on your iPhone 4S damaged, cracked, or not working properly after dropping your iPhone 4S? Whatever the issue is with your iPhone 4S screens, our brand new, 100% compatible iPhone 4S LCD and Touch Digitizer replacement screen assembly will resolve all screen issues and make your iPhone 4S work like new again.

Rather than taking your iPhone 4S in for repair somewhere, and costing you a couple hundred dollars, all you need is this assembly replacement part, and with our iPhone 4S repair guide and 4S repair video, and the safe, free pry tool we include with your order, you can make the repair yourself for much less.

Whether the issue is with the LCD or the digitizer screen, Apple has made it possible to only replace both screens at the same time with this assembly part, which also makes it possible for you to easily replace your screen yourself.

Important:It is not recommended to try to separate the screens - doing so will permanently damage the new part. We supply you with everything you need to repair your iPhone 4S.

iPhones replacement parts are available for purchase and installation, and oftentimes, you can even install them yourself. You can order cell phone LCD screens for iPhone 4 phones and learn how the assembly is done in order to give your Apple iPhone a much-needed renovation.

LCD Screen: LCD stands for liquid crystal display, and it is used to create the images that you see on your iPhone. If the screen is still emitting light but appears to be solid black or white, you may need to order a replacement LCD screen.

Digitizer: The thin piece of glass that is attached to the LCD is called a digitizer. This is basically the part of the iPhone 4 that gives it touchscreen capabilities.

Glass: This is the protective layer that covers the LCD and digitizer. This is the piece of the iPhone 4 that is the most likely to break, but the touchscreen on the iPhone will still be functional if the LCD and digitizer remain unharmed.

When it is time to order a replacement for your iPhone, searching for the piece by the iPhone"s model will allow you to be sure that you are getting the correct size if you are doing the assembly yourself. Some models such as the iPhone 4 and iPhone 4s share the same-sized screen, so the screens can be used interchangeably. The iPhone 4, iPhone 4s, and any other Apple device with a screen that is 3.5 inches can be used this way.

After you have purchased the replacement LCD screen with the digitizer and glass for the touchscreen, you will have to turn off the iPhone 4 and begin to take it apart by removing all of the screws.

Your iPhone 4 will have more screws beneath its battery. Be sure to remove the screws from under the battery before attempting to remove the original screen.

Once the screen is in place, you will need to reassemble the phone and place all of the necessary screws in the correct places under the battery and in the exterior screw holes.

White iPhone 4S LCD + Touch Screen Digitizer Replacementwill resolve all screen problems your iPhone 4S may encounter. Damage may include image issues where you see lines, dead pixels, color distortion, or a black white screen. Your iPhone 4S digitzer may have a cracked glass or it may not be responding to touch properly. This Factory Spec replacement screen will fit and look just like the original. This is an affordable solution instead of buying a new phone. Purchase the

If you rely on your iPhone for business, having it partially work is hardly acceptable. When the screen is black but the sound still works, you may be able to accept phone calls, but most other features are unusable. There are a few things that can cause an iPhone 4S to display a black screen. If the sound is still working, you can rule out the possibility of a dead battery. Any other causes can usually be solved by restarting, resetting or restoring the iPhone to its factory settings. If none of these solutions work, you will need to take your iPhone to an Apple technician for repair.

Restart Apple suggests a restart as a first troubleshooting step. A restart is done by pressing and holding the "Sleep/Wake" button for five seconds. Normally, a red slider appears on the screen, but you probably won"t see it. Place your finger a half inch from the top of the screen on the left side and then drag your finger to the right edge. The slider doesn"t require much precision in where you place your finger so, assuming the touch controls are still working, this should work. After a half-minute or so, turn the iPhone back on by pressing and holding the "Sleep/Wake" button.

Reset If restarting your iPhone doesn"t solve the dark-screen problem, reset the device. Do this by holding down the "Sleep/Wake" button and the "Home" button at the same time for at least 10 seconds. Hopefully, you will see the Apple logo appear before you release the buttons. If you don"t, release the buttons anyway and then wait a minute or so for the iPhone to power down and turn back on again. If resetting the iPhone doesn"t work the first time, try it once again.

Restore to Factory Settings Restoring an iPhone to its factory settings is generally the last hope you have to resolve a black-screen problem yourself. To do this, connect the iPhone to your computer and launch iTunes. After selecting the iPhone in the right corner of the screen or in the left sidebar, if you activated the sidebar option, click the "Summary" tab and then click the "Restore iPhone" button. When the restore process is finished, the iPhone should display a gray screen with the word "iPhone" on it. Drag the slider at the bottom of the screen and follow the prompts to set up your iPhone again. This process restores your iPhone to its original factory condition. During the process, you are prompted to restore a previous backup to return your files and data to the phone.

Recurring Black Screen After your iPhone is working properly again, update to the latest iOS and update your apps. For example, some iPhone 4S owners reported black-screen problems after upgrading to iOS 6.0, but these issues were resolved with the release of iOS 6.1. If the iPhone goes black again after updating and applying a backup, you may need to repeat the restore process, this time without the backup. Bugs between an app and the iOS may also be the cause of a black screen.

Version Information Information in this article applies to iTunes 11 on a computer and iPhones running iOS 6.1. It may vary slightly or significantly with other versions or products.

Keep your device connected and wait until the recovery mode screen appears:iPhone 8 or later, including iPhone SE (2nd generation): Press and quickly release the volume up button. Press and quickly release the volume down button. Then, press and hold the side button until you see the recovery mode screen.

iPhone 7, iPhone 7 Plus, and iPod touch (7th generation): Press and hold the top (or side) and volume down buttons at the same time. Keep holding them until you see the recovery mode screen.

iPhone 6s or earlier, including iPhone SE (1st generation), and iPod touch (6th generation) or earlier: Press and hold both the Home and the top (or side) buttons at the same time. Keep holding them until you see the recovery mode screen.

Locate your device on your computer. When you see the option to Restore or Update, choose Update. Your computer will try to reinstall the software without erasing your data. Wait while your computer downloads the software for your device. If the download takes more than 15 minutes and your device exits the recovery mode screen, let the download finish, then repeat step 3.

Mobile Repair Factory is an independent service company and is in no way affiliated with any other brand such as iPhone, iPod, iPad which are registered trademark of Apple Inc. Samsung is also the trademark of Samsung group, is no point is linked to Mobile Repair Factory, which is an independent company providing third-party solutions.

Got broken display in your Apple iPhone 4s? Buy the complete LCD with Touch Screen for Apple iPhone 4s - White and replace the broken, cracked or scratched screen in your handset. 100% Perfect fit with high manufacturing quality. With least technical know how required, it is easiest to replace display for your handset.

The replacement combo lcd with touch for Apple iPhone 4s comes with manufacturing defect warranty and the shipping is done in secured packing to make sure you get the product in perfect shape.

Insert the flat end of the spudger about 2 to 3 mm between the display assembly and the silver frame, and slowly lift the screen. If you use a different pointed or flat tool, make sure you don’t scratch the front panel from the inside. This is especially important when you’re replacing the Home button’s flexible flat cable because you’ll be using the same screen.