nintendo switch lcd screen repair factory

Nintendo"s Factory Service Repair, which is defined as the repair (or replacement, at Nintendo"s discretion) of Nintendo systems, is available for systems within their original manufacturer"s warranty or repair warranty period. Factory Service Repair may also be available for a fee for systems where the manufacturer"s warranty or repair warranty has expired, or where the issue with the system is not covered under warranty. Please visit the Nintendo Customer Support page to determine what options may be available for your system.

If you send in your system for service under the original manufacturer"s warranty or the repair warranty and it is determined that the issue was caused by something other than a manufacturer"s defect, payment will be required before Nintendo will repair your system. Two attempts will be made to contact you to arrange for payment. If we are unable to contact you, your system will be returned to you unrepaired.

Nintendo will not repair any product found to be counterfeit or altered (e.g. software modification, hardware modification, tampered with, etc.). Any system identified as such will be returned as-is. In addition, Nintendo reserves the right to refuse requests for repairs that, in Nintendo"s sole discretion, are fraudulent.

If a product cannot be repaired, it may be replaced with a Factory Certified System. Factory Certified systems must meet functional new product specifications. They may be built with new housing, or may include minor cosmetic defects (e.g. scratches, dents).

Your repaired or replaced system will either receive a 100-day repair warranty that begins the day it ships back to you or will continue the remainder of its original manufacturer"s warranty—whichever is greater.

When you send in your system for repair Nintendo will attempt to preserve any saved data on your system. However, due to the nature of some system issues, saved data is not always recoverable after repairs are performed. Please read the documentation that is enclosed with your returned repair for more information.

In order to find your best repair option, we need to find out exactly what kind of problem your system is experiencing. To do that, we ask that you first visit the troubleshooting section for Nintendo Switch and select the issue you are experiencing. At the end of troubleshooting you will be presented with the best repair or replacement options available to you.

Follow this guide to replace a damaged or faulty LCD panel on the Nintendo Switch game console. This procedure replaces just the LCD panel. To replace the LCD panel and the digitizer as a complete unit, follow our screen replacement guide.

The Switch uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit"s Phillips bits are designed to be cross-compatible with JIS-style screws.

You can complete this repair without removing the heat sink and the game card reader, but it makes disconnecting and reconnecting the LCD panel ribbon cable much more difficult. Keep this in mind when you perform this repair.

Note: This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).

This blog post is the first in a series of short posts on common Nintendo Switch problems and what to do about them; that might mean a DIY fix or sending it in to a pro for a quality and quick repair. In the world of handheld video game consoles, there’s almost nothing more important than the screen, so we decided to tackle common Switch LCD problems with today’s post! Let’s jump right in…

Dock causing scratches and scuffs: When the Switch is haphazardly placed into the dock it is possible that the system’s screen can be scratched by the hard plastic edges. If you find yourself frequently switching the console between handheld and docked positions, it isstronglyadvised that you use a screen protector or attach microfiber clothes to the offending hard plastic parts.

Screen scratches or cracks: Have you ever had your heart sink and time slow down when you drop your favorite electronic device? I know I have. When you’re unlucky, like myself, your device’s screen fractures in more ways than you thought possible. The first thing to do is to diagnose what is broken. If the image beneath your screen is still okay then you just need a new digitizer. If the image is also acting strange then you’re most likely going to need a new LCD as well.

Dead Pixels: Dead pixels are imperfections on a screen caused by pixels that don’t light up anymore. LCD screens have been known to commonly have these and they are most noticeable on a handheld gaming system like the Switch. Nintendo has stated that they know about the problem but that it is not covered by their warranty as dead pixels are “characteristic of LCD screens.” These screen defects however, are some of the most annoying, immersion-breaking issues in handheld gaming and it is crazy that Nintendo has denied fixing them.

(Scroll to the bottom for a DIY how-to video) If you are electronically savvy and feel like you want a general outline of the process of repairing your own Switch, read on!

The first thing you’ll need to do is remove all of the screws which hold your Switch together with a screwdriver and then you have to remove the back of the console. Then you’ll find a large piece of aluminum shielding which will require more screw removal. Once the shielding is unscrewed, you have to disconnect the memory card slot circuit board, and immediately disconnect the battery. A few more components need to be disconnected and removed and then you can move onto the removal of the digitizer. The digitizer is held onto the Switch with adhesive which needs to be softened with either an iFixIt iOpener, a silicon heating platform, or a hot air gun. When the screen is warmed up, you can take the digitizer off of the frame with a variety of pry tools, being careful to avoid the digitizer ribbon cable underneath the right side of the screen. You’ll then need to clean off the adhesive and either put on a new digitizer or if your LCD is also broken, you’ll need to remove the LCD and replace it with a new one, as well. Once your digitizer and/or LCD are replaced, it’s just a matter of reassembling the console and it should be good to go!

Well, I hope we helped illuminate some of the common screen issues and what you can do about them today in our post. Don’t forget to check out our Amazon store for all of your repair supply needs. Next time, we’ll be tackling another round of common Nintendo Switch issues and how to fix them yourselves or with a little bit of our help. Thanks for reading our new series and, once your console is all fixed up, don’t forget to keep playing!

Get your Nintendo Switch blank screen repaired at eStarland. From our expertise in video game console repairs since 1991, we understand your needs and the care you deserve during the entire process of our repairs. All Nintendo Switch repairs come with 90 day Warranty on Parts and Workmanship.

Your Nintendo Switch Blank Screen repair service will be performed while you wait. If you are in the area of DC, Maryland and Northern VA, we welcome you to stop by. Directions to our location

While our trained repair technician will diagnose and repair your device to meet manufacturer"s performance standards, we strive to exceed your expectations in handling the entire process to ensure your total satisfaction.

Note: Additional time may be required on holidays, weekends and / or unforeseen circumstances. Customers will be notified immediately of any change in scheduled completion date. If possible, back up your data prior to sending in. We will make every attempts to keep your data intact but we are not responsible for any data loss during the repair.

ADA Compliance: In concurrence with the National Association guidelines, Xcell Repair Plus and it"s affiliates are committed to providing an accessible website. If you have difficulty accessing content, have difficulty viewing a file on the website, or notice any accessibility problems, please contact us at (910) 988-4279 to specify the nature of the accessibility issue and any assistive technology you use. We strive to provide the content you need in the format you require. Copyright © 2022 Xcell Repair Plus LLC All rights reserved.

If your Nintendo Switch is freezing, lagging, or experiencing other glitches during use, you should try a soft reset to get the system running properly again. This essentially entails turning it off and then back on again.

On the other hand, if you want to wipe all your data off the Switch, such as before you sell it, donate it, or send the system in for repairs, you might want to complete a factory reset.

On the other hand, if you want to wipe all your data off the Switch, you might want to complete a factory reset. This is a good idea if you want to sell it, or donate it.

Nintendo Switch offers access to thousands of games, from action/ adventure games and first-person action games to role-playing games (RPG). Like with any gaming machine, this hybrid experiences some glitches, among them the infamous Nintendo Switch blue screen of death. Despite the name, the screen problem is easy to fix if you understand the possible causes.

A blue screen on Nintendo Switch can occur because of physical damage to the screen, a broken dock, or a software issue. First, try restarting the console. If it works when docked, try updating the software. Past that you’ll need to talk to Nintendo Support for a repair, which costs ~$120.

It can be super frustrating to have this nice shiny console suddenly brick itself when undocked, and unfortunately that’s basically what’s happening with the blue screen. And if you’re already getting annoyed that you may potentially have to pay a repair fee for this, just note that depending on when you got the Switch this work may be covered under warranty.

Identifying factors linked to screen malfunction makes it easier to troubleshoot and resolve the issue. Here are some probable reasons for the blue screen on your Switch console:

The Switch is a small and portable console, but this also increases the risk of accidents. If your Nintendo Switch has been dropped or just generally roughed up, something may have shaken loose internally.

To maximize the gaming experience, most players download lots of files onto the Switch console. From new games and apps to updates, these files enhance the Switch’s performance. If any of these files contain corrupted data, the system might freeze, and you’ll get a blue screen.

Some players have experienced the blue screen in Switch when using a third-party dock. Switch consoles work well with most docks on the market. Still, you might experience the blue screen when trying a third-party dock that’s incompatible.

After learning the causes of a Nintendo Switch blue screen, the next step is to learn how to fix the problem. While the problem might appear fatal, the fixes are simple, and you’ll get back to your game quickly. Here are different methods to fix a Switch console with a blue screen:

The easiest solution for the most common Nintendo Switch problems is to restart the machine. Restarting resolves any software bugs or file problems that could cause the frustrating blue screen.

If you’ve restarted the Switch console but the blue screen remains, a hard reset is a next fix to try. Hold down the power button for about 12 seconds until the machine goes off. Wait for about 30-45 seconds.

Docking allows you to enjoy an immersive gaming experience on a TV/monitor display. If you’ve docked your console when the blue screen develops, remove the machine from the station and try playing in handheld mode.

Outdated software causes glitches which might include the blue screen of death on a Switch console. To rule out software issues, confirm your Switch has the latest system update. From HOME, go to System Settings, select System, then System Update, and check for updates.

Before checking for updates, connect to Wi-Fi to allow automatic updates of the latest patches. The system checks for updates if you’re online, and the update starts automatically. Restart the console and confirm if the blue screen glitch has resolved.

If all the fixes up to this point have failed, drain the battery and restart the console. Unplug the AC adapter and the HDMI cable and leave the console on the blue screen.

After the battery drains, plug in the adapter and start charging the gaming machine. Turn on the Switch to confirm if the screen problem has been resolved.

If you’ve tried all the quick fixes and nothing works, you can factory-reset the console and delete everything. The method is the last resort after everything else fails, and you have to appreciate you’ll lose all the saved data, including game data, screenshots, and other files.

Once the power is on, release the power button but continue holding the volume buttons to recovery mode. Scroll down to Restore Factory Settings and delete everything in the console. Confirm if the screen problem is gone.

Nintendo boasts a reliable customer support department that’s always ready to help. If you’ve tried all fixes without success, contact the support team through phone, text, or a support form on their platform.

Contact the Nintendo Switch support for repairs or parts replacement if you suspect a hardware failure. Make sure to remove game cards or microSD cards to avoid loss of games and data during repairs.

Nintendo Switch repairs can resolve the blue screen problem and many other glitches with the console. The cost of repairs for a Switch console depends on the extent of damage and parts required for replacement. Here’s a breakdown of the costs:

Screen problems: For all screen issues including blank, frozen, blue/black LCD display, the console won’t turn on/off, crashing, and failure to boot starting at $97.95.

Switch service companies use high-quality OEM replacement parts. These parts and the repairs come with a warranty, which adds value to the service offered.

A blue screen of death is an irritating problem with the Nintendo Switch console. Luckily, these tips will help you troubleshoot and fix the problem quickly.

If the scratches or residue are still present, the system will need to be repaired. Nintendo no longer offers factory repairs for the following systems: Original Nintendo 3DS – Model No. CTR-001 – Serial numbers begin with “CW” or “CB”

Nintendo calls this an “anti-scatter” layer, and they don’t want you to remove it. The screen on the OLED model is actually made of glass, which (in theory) means it’s not as easily scratched. However, the anti-scatter layer is made of soft plastic. It’s there to catch the glass shards if the screen were to shatter.

If you’ve been enjoying your Nintendo Switch OLED, you might want to buy a screen protector before you regret it. Even though the Switch’s OLED new display is glass, it’s still susceptible to scratches, as discovered by YouTuber JerryRigEverything.

Follow this guide to replace a damaged or faulty LCD panel on the Nintendo Switch game console. This procedure replaces just the LCD panel. To replace the LCD panel and the digitizer as a complete unit, follow our screen replacement guide.

The best (and safest!) way to fix your scratched and scuffed-up iPhone, Android phone, or other mobile device is to replace the screen!…Try this at your own risk.Pour polish into a bowl.

Yes. Nintendo offers a basic limited hardware warranty for its Switch consoles. It lasts for only 12 months from the date of purchase and covers only “defects in material and workmanship.” Accessories get just three months of warranty coverage.

The new system features a vibrant 7-inch OLED screen, a wide adjustable stand, a dock with a wired LAN port, 64 GB of internal storage, and enhanced audio.

You may need only simple instructions to correct a problem with your product. Try our website at support.nintendo.com or call our Consumer Assistance Hotline at 1-800-255-3700, rather than going to your retailer. Hours of operation are 6 a.m. to 7 p.m., Pacific Time, Monday – Sunday (times subject to change).

Hi i found a way to avoid dock scratching Switch’s screen and/or Switch’s back. The only thing you have to do is to put Double Sided Foam Tape to the 4(or the 2 if you want to protect only your screen) points that the switch is touching and you are done!

To clean your Switch OLED, Nintendo recommends using plain water or a solution that has at least 70% isopropyl alcohol concentration. We suggest using isopropyl alcohol as it also acts as a disinfectant that will kill a vast majority of surface bacteria and viruses.

While the OLED Switch’s display is technically made of glass, you won’t actually ever come in contact with it directly. That’s because Nintendo has stuck an “anti-scattering adhesive film” to the front of the display for added protection.

Nintendo Switch’s 6.2-inch touchscreen display makes it vulnerable to sharp objects, just like your smartphone. Avoiding any damage to the screen seems self explanatory but one bring problem since its release has been the dock scratching the delicate screens.

After years of rumors, the company has at last confirmed the existence of a new Switch model with an OLED display. It’ll cost $349.99 and arrive on October 8th.

The liquid screen protector doesn’t remove any scratches that are already there on the original screen. However, it protects your original screen from damage after you apply the liquid to the screen. Moreover, the liquid screen protector helps add impact protection to your device.

The liquid screen protector doesnʼt add any noticeable scratch protection. It also doesnʼt fill in cracks or scratches. But it does add to the impact protection of your smartphone. The biggest drawback of the liquid screen protector is that you canʼt remove it once itʼs damaged.

Nintendo has a limited warranty for all Switch products. The warranty lasts 12 months and can’t be extended. In case of any defects in material or workmanship during the warranty period, Nintendo will fix or replace the defective components.

Is Nintendo still fixing Joy-Cons for Free 2021? The company will now repair drifting Joy-Con controllers for free, even if your controllers are outside the regular warranty.

Hello everyone, this is game leader repair. Today I bring you an article: Nintendo Switch common problems and how to solve these problems, I hope this article can help everyone.

Your Nintendo Switch may be your most valuable treasure. When his touch screen is broken, you may not enjoy the joy of the game. The touch screen can be said to be the most important accessory for handheld video game consoles. When the screen is broken, you need to DIY repair or send it to professionals for quality and quick repair. So today we bring you the common problems of Switch LCD, let"s jump into ...

Scratches on the base: If you place your Switch in the base at random after playing the game, or on the table, the hard plastic edge of the switch is likely to scratch the screen of the system. After scratching the screen, the game feels bad to touch.

We recommend that you use a screen protector on the base to prevent the screen from being scratched and dropped, in order to extend the life and improve the sense of fun.

What you need to do at this time is to diagnose where the damage is. If the image at the bottom of the screen is still OK, then you just need to replace it with a new digitizer. If the image display is not clear, then you may need to change to a new LCD.

Dead pixels: Dead pixels are screen defects caused by pixels that no longer emit light. Most LCD screens currently have these shortcomings, and they are most prominent on handheld gaming systems such as the Switch.

Nintendo officials have stated that they are aware of this screen"s dead pixels, but because the dead pixels are characteristic of the LCD screen, they are not covered by the warranty. However, these screen defects are some of the most annoying and immersive destructive issues in handheld games, and Nintendo denies it"s crazy to fix them.

If you are more experienced in the repair of electronic products, and want to understand the process of repairing your Switch in general, you can continue reading this article! You can also go to YouTube to search for how to replace the Nintendo Switch touch screen. There are many videos in this area. I believe those videos can solve your problem.

More components need to be disconnected and removed before you can proceed with removing the digitizer. The digitizer is fixed to the switch with an adhesive that needs to be softened using an iFixit iOpener, a silicon heating platform or a hot air gun.

After the screen is warmed up, you can use various prying tools to remove the digitizer from the rack. Be careful not to place the digitizer ribbon cable under the right side of the screen.

Then you need to remove the adhesive and put in a new digitizer, or if the LCD touch screen is also broken, then you also need to remove the LCD touch screen and replace it with a new LCD touch screen.

The above steps are some common Nintendo Switch problems and how to repair them. I hope to provide some help to love Nintendo Switch game enthusiasts. In the next article, we will introduce other Nintendo Switch problems and how to solve them by ourselves or with our help.

If you want to buy game console accessories for Nintendo Switch series, please send us an email: gameleaderrepair@gmail.com, or DM WhatsApp / Wechat +86 159 1532 7116. Our business will reply and quote you within 24 hours.

If you have a cracked screen on your Nintendo Switch, there are a few things you can do to try to fix it. First, if the crack is not too severe, you can try using clear nail polish or super glue to seal the crack. If the crack is more severe, you may need to replace the entire screen.If you have a cracked screen on your Nintendo Switch, the best thing to do is take it to a professional to get it fixed

Nintendo Switch screens are made with Gorilla Glass, which is a very strong and durable type of glass. However, if your Switch screen does become cracked or damaged, there is no official way to repair it. Nintendo does not offer any kind of screen replacement service, so you will need to take your Switch to a third-party repair shop if you want the screen fixed.

There are some do-it-yourself methods for repairing a cracked Nintendo Switch screen, but these are not recommended as they can void your warranty and potentially cause more damage to the console. It is always best to leave repairs to the professionals.

Assuming you’re referring to the Nintendo Switch Lite, there are a few things to consider when it comes to getting the screen fixed. The first is whether or not you have insurance. Many people don’t realize that their homeowners or renters insurance often includes coverage for personal electronics.

If you have insurance, check with your provider to see if they cover repairs for the Switch Lite.If you don’t have insurance or your policy doesn’t cover repairs, you’ll need to pay out of pocket. The cost of repairing a Switch Lite will vary depending on the severity of the damage and where you take it for repair.

For example, if you only have a cracked screen, you can expect to pay around $100 for the repair. However, if your entire system needs to be replaced, it could cost upwards of $200.To get the best deal on repairs, shop around at different repair shops in your area.

Be sure to ask about pricing upfront so there are no surprises later on. Once you’ve found a reputable shop that offers fair pricing, schedule an appointment and drop off your Switch Lite for repair!

No, the Nintendo Switch’s screens do not crack easily. The Switch uses a special type of glass that is designed to be shatter-resistant. In fact, the Switch’s screens are some of the most durable on the market; they’re more resistant to scratches and scuffs than most other types of mobile device screens.

There are a few things that you can do in order to fix the touchscreen on your Nintendo Switch. The first thing that you should try is restarting the device. If that does not work, then you can try resetting the device by holding down the power button for twelve seconds.

The Nintendo Switch is a popular gaming console that has been on the market since 2017. If you’re the owner of a Switch, there’s a good chance you’ve had to deal with some type of screen issue at one point or another. Whether it’s a cracked screen, dead pixels, or just general wear and tear, replacing the Switch’s screen can be a pricey endeavor.

If you’re looking to get your Switch’s screen replaced, you have a few options. You can send it in to Nintendo for repairs, which can cost anywhere from $75 to $150 depending on the issue. Or, you can take it to a third-party repair shop, which will likely charge around $100 for the fix.

If you’re feeling handy, you can also replace the screen yourself. This option will obviously save you money, but it’s important to note that it voids your warranty with Nintendo.Replacing the Switch’s screen isn’t overly difficult, but it does require taking the console apart completely. You’ll need to purchase a replacement LCD touch panel , which will set you back around $60-$70 .

You’ll also need a few small tools like screwdrivers and tweezers .Once you have all the necessary parts and tools, follow these instructions to replace your Switch’s screen:1) Power down your Switch and remove both Joy-Cons from the sides.

If your Nintendo Switch’s screen is cracked, there are a few things you can do to fix it. You can either replace the screen yourself or take it to a professional to have it replaced. If you’re replacing the screen yourself, you’ll need to purchase a replacement screen and some tools.

Once you have the replacement screen and tools, follow these instructions:1. Remove the back panel of the Nintendo Switch using a Phillips screwdriver.2. Carefully remove the battery from the console.

3. Unscrew the LCD assembly from the front of the console and carefully remove it.4. Take out the old LCD screen from its housing and insert the new one in its place. Make sure that all of the connectors are properly in place before screwing everything back together again.

You leave your Nintendo switch in its case and come back to it, only to notice that it’s suddenly showing an orange screen and you can’t seem to get the solid color away no matter what you do. This has been happened to a lot of other users just like you over the last couple of years, and still happens even in 2022.

Nintendo switch orange screen of death can be caused by hardware damage after dropping the switch on a hard surface. In some other instances, it can be caused by an overheated Wi-Fi chip which can be caused by repeated use overtime.

When switches are faulty and the system detects a failure in one of more of the components, the screen displays a solid color all of which have different meanings. The solid orange color on Nintendo switches is classified as an unknown exception in the panic code.

However, hardware damages do not necessarily have to come from dropping the switch. In fact, an overheated Wi-Fi chip has proven to be one of the most common causes of the orange screen on Nintendo switch (or switch lite), and that can happen just from simply using the switch overtime.

Hold the power button for 10-30 seconds to force shut it down. Once the screen is off, press the power button again to turn it back on. Doing that will immediately fix the Nintendo switch orange screen error, and you are good to go.

Once the hard reboot has been fixed, the next thing is to update the system firmware. This will remove any software bug that could cause the orange screen issue to repeat itself.

You can also manually remove corrupt cache files by power cycling your switch. To do that, allow the battery to drain by keeping it turned on and not charging it. Once the battery is drained, press the power button for 15 seconds. Finally, charge the switch fully and turn it on afterwards.

Once done, any software issue will be fixed and you will stop seeing the orange screen on your Nintendo switch or Nintendo switch lite. However, if the issue happens again, then it is an hardware fault and has to do with the Wi-Fi IC.

If the Wi-Fi chip has become overheated, you can fix this by reflowing the IC. This is a more permanent fix for the Nintendo switch orange screen of death error, but it’s more technical.

NOTE: If not done right, you may damage the switch beyond the orange screen issue and may need to replace the IC in that case. If you are still under warranty, just go ahead and get it fixed. Otherwise, you either have the option of doing the hard reset every time it happens or just giving this more permanent fix a try.

If you are not very technical and don’t want to do the procedure yourself, you can contact Nintendo support for a fix or replacement if you are still under warranty. Otherwise, you can get it fixed for a price or just get a new switch.

At this point, your best option is to contact Nintendo to get your switch fixed or replaced. If you are still under warranty, there is no repair cost for this and you will get it fixed or replaced in within a couple of days depending on your location.

The repair cost for a Nintendo switch with the orange screen issue is between $89- $110 depending on your location and where you are repairing it from. If you are getting it fixed from Nintendo’s official factory service repair, you will be given a price quote.

It is frustrating if your favorite gaming console won’t turn on. You can’t play Mario Kart, Pokémon or any other of your favorite games. In my case, I have a Nintendo Switch.A couple of months ago I had a problem with my unit. My Nintendo Switch won’t turn on after a hard reset. Turns out the battery was completely dead. What a relief after charging it and seeing the screen come to life! If you face a similar problem, then don’t panic and think of the worst. Continue reading to find the possible solutions.

The Nintendo Switch is a very popular handheld gaming console from, well, Nintendo. Unlike PlayStation and Xbox, the Nintendo Switch is primarily a handheld device.

Nintendo Switch is available in three variants. The regular Nintendo Switch comes with an LCD Display and also supports docking mode. Then we have the Switch with OLED display. This also supports TV docking.

Finally, we have the Nintendo Switch Lite. It is the tiniest of all the three with a 5.5” LCD Display. Sad thing is the ‘Lite’ variant doesn’t support docking feature.

Even the best of consoles have problems. Nintendo Switch is no exception. After continuous usage, you might feel the Switch becoming slow, sluggish and unresponsive. Resetting the device usually gives it a new life.

Another reason to reset the Nintendo Switch is if you selling your unit and want to clear all your data. A factory reset will erase all your personal and game data from the device.

Sometime, Nintendo Switch will not turn on after performing a hard reset. Before sending your unit for Nintendo service, perform some simple troubleshooting steps that we mentioned below.

One of the common problems is a completely discharged battery. If the battery is dead, then Nintendo Switch won’t turn on after hard reset. Charge the Switch for at least 3 hours.

You can directly charge the console using the wall adapter. An alternative way is to charge the Nintendo Switch using the Dock. In either case, look for charging indication.

In some cases, the Switch will not charge directly or through the dock. This may be due to a faulty cable. Check for any dust and debris in the charging port of the Switch.

Inspect the charging adapter and its cable. If you see any wear & tear, cuts or damage, do not use the adapter. Nintendo Switch won’t charge if the cable doesn’t plug all the way in or it its loose.

Try to replace it with a new one from Nintendo. Do not use a 3rd party charger or cable. If the cable and adapter look fine, try charging using a different dock. You can borrow one from your friend.

Do not reset your Nintendo Switch with the microSD Card installed. This will make the card unreadable by the switch after reset. Take out the microSD Card and perform a reset once again.

Another problem with the microSD Card is possible data corruption. There is no way to identify this problem. So, remove the microSD Card and restart the Switch. If the problem is with microSD Card, then this will solve it.

Sometimes, a soft reset will start the Nintendo Switch. But before this, check if your battery is charging or not. Also charge it for 30 minutes to 1 hour before proceeding.

Now, release the power button. This will force shutdown the Nintendo Switch. Wait for a couple of seconds. Press the power button to start the Nintendo Switch like you normally do.

Even if the previous soft reset did not bring your Nintendo Switch to life, then it is time perform a proper hard reset. For this, you have to be sure that the battery is working fine. Also, charge the battery for some time, about 30 minutes to 1 hour.

Now turn off the AC adapter and disconnect the charging cable from the Nintendo Switch or the Dock. If you haven’t removed the microSD Card, go ahead and remove it now.

Wait for 30 seconds after unplugging theadapter or charging cable.Now, press and hold the power button and also the volume up and down buttons. Do this for about 10 seconds or until the Nintendo logo appears.

This will take you to the ‘Maintenance Mode’ of the Nintendo Switch. You will see two options for resetting the device. One is to initialize the console with deleting the game data. In this mode, Switch will delete all the user data but keeps the game save data intact.

The second option is to initialize the console by deleting all data. This is equivalent to a Factory Reset. If you got to this screen, we recommend the second option as it will give a fresh life to your Nintendo Switch.

Sadly, if the screen doesn’t turn on during this process, there is a hardware issue with your Nintendo Switch. Contact Nintendo service for warranty, repair, replacement of refund.

You can check for physical damages to the Nintendo Switch. In case there is a damage such as battery bulging, don’t try to turn on the Switch. Contact Nintendo immediately.

Gaming consoles from reputable brands like Nintendo built to serve you for a long time. Nintendo Switch is one such console that is well received in the community. But if you are unlucky, you might face issues with the Switch. One such common problem is the screen won’t turn on. Don’t panic if your Nintendo Switch won’t turn on after hard reset. We provided some basic troubleshooting tips specifically for this problem. We hope that one of these solutions will solve the issue with your Nintendo Switch.

The Nintendo Switch is one of the most popular consoles on the market (and one of the consoles that is going to be on sale during Black Friday thanks to Nintendo Switch deals)– with great exclusive Switch games like

From relatively minor cosmetic damage that can largely be ignored to serious issues that have rendered players’ systems useless, we’ve compiled a list of the most common problems that have befallen Switch owners. When applicable, we’ve also included possible solutions, though we must stress that anything involving taking apart a piece of your console could potentially make the problems worse or void your warranty. If you’ve encountered a problem, follow our guide below and we’ll have you playing your favorite Nintendo Switch games again in no time.

Moving the Nintendo Switch from its portable configuration into the dock is a process that takes only seconds. If you don’t put the console in perfectly straight, however, it’s quite easy for the dock to leave permanent damage on the outside of your screen. The damage seems to be caused by two pieces of plastic protruding inside the dock, which will make contact with the outside bezel of the Switch at either end of the console when it’s dropped into place.

A Nintendo Switch screen protector is a must-have accessory, as any damage done by the dock will be to the removable protector and not the console itself. However, early, flexible screen protector kits released for the system, including the “official” PDP product, were cut incorrectly, causing bubbles. Tempered glass covers shouldn’t suffer from this problem. It’s advised to wait about 24 hours before docking your system after using a tempered glass protector, however, as the adhesive could melt if not allowed to set.

Should you want your Switch to be protected inside the dock and look absolutely adorable, there is another option that will eliminate the need to use a screen protector altogether, assuming you won’t be traveling with the system. Etsy user TinckoyMakesitSew sells several Switch dock cozies, with themes like Mario, Zelda, classic Nintendo Entertainment System, and Pokémon, as well as several solid colors.

Provided that you have a little extra room for the Switch to sit on your shelf, a slightly more complicated option involves leaving the Switch out of the dock entirely. By connecting an additional USB-C cable to both the dock and the Switch — and placing the Switch on a separate stand so its vents have enough room — the console can still project its image to a television and draw power as if it were sitting in the dock directly. It’s an imperfect solution that could lead to some disconnections, so we recommend experimenting with several cables in order to get a tight fit.

The most notorious of the Nintendo Switch’s issues thus far, disconnecting left Joy-Con controller, appears to be a fairly widespread problem. The Joy-Con can disconnect with the console, seemingly at random, which can be extra frustrating if it leads to being killed during a good run in Breath of the Wild. Squeezing the controller, placing it behind one’s back, and covering the front of it with a hand all appear to exacerbate the problem.

According to multiple reports and user teardowns, the problem appears to stem from Nintendo’s decision to put the left controller’s Bluetooth antenna inside the circuit board, rather than using a discrete component, which could be positioned optimally.

Nintendo hasn’t publicized it, but the manufacturer seems to have created a passable DIY hack for early adopters. After sending in a faulty Joy-Con to be repaired by Nintendo, CNET’s Sean Hollister discovered that a small piece of conductive foam was placed over the controller’s internal antenna. It seems too easy, but the simple addition reportedly fixed the controller’s synchronization problem.

Conductive foam, which helps to protect against interference, is relatively inexpensive, especially compared to the cost of a replacement Joy-Con controller. You only need a tiny square of the foam for the fix, so you can easily open up several Joy-Con controllers and apply the foam without having to buy more. Alternatively, you can contact Nintendo and send in the controller for repair. This issue has supposedly been resolved in later iterations of the Switch and Joy-Con controllers; however, those with the original version of the console could still experience some issues.

After leaving your Nintendo Switch running in its dock for an extended period of time, you may find that the system has actually warped or bent very slightly backward on one side. If the problem is severe enough, you could even encounter trouble attempting to remove it from or place it in the dock again.

To test whether or not your Switch has warped, take off both Joy-Con controllers and place the system screen-side down on a completely flat table. If it has warped at all, you will be able to rock it back and forth.

This particular issue doesn’t necessarily have any negative effect on your play experience, and we’ve seen some users report their Switch systems were slightly uneven out of the box. However, if the issue is bothering you, Nintendo is accepting the console for repairs.

It isn’t as widespread as some of the other issues users have faced with the Switch, but a number of people have still reported finding small cracks on the top of the console’s casing. Typically, the cracks are found near the game card slot or in the bars going across the top vents.

It isn’t clear what causes the cracks to form, but some of those affected claim that they have not treated their system particularly roughly, so it’s possible the issue is linked to the warping problems other users have encountered. If you’re traveling with the Switch in a backpack or purse, we suggest putting it into a sturdy carrying case, as well, as the plastic is remarkably soft for a portable system.

If cracks have formed in your Switch’s casing, your only real option will be to either live with it or, if it has grown worse or spread to other areas of the console, send it to Nintendo for repairs.

In addition to controller issues and problems related to the physical construction of the Nintendo Switch and its dock, a number of users have also experienced screen freezes, as well as horrible Switch seizures that cause the system to blare a high pitched squeal while lights flash faster than an ecstasy-fueled rave. Some users have also experienced temporary freezes that result in games like The Legend of Zelda: Breath of the Wildcrashing, potentially losing their progress.

The only short-term solution that has worked thus far has been to do a “hard reset” of the Switch — holding down the power button for 15 seconds until it completely shuts down, then turning it back on. Though this fixes the issue briefly, affected Switch owners have claimed the issue returns shortly afterward and won’t even be fixed with a factory reset of the system.

Nintendo’s consoles carry a one-year warranty, and we would advise not wasting your time with do-it-yourself fixes for a problem this severe. Instead, contact the company to get a replacement unit sent out as quickly as possible. After spending $300 on a system in addition to games and accessories, you deserve to have it work as intended.

Dead pixels are annoying on any device, especially portable screens, where they tend to be the focus of all your attention, mocking you for wanting a screen free of imperfections. In the Nintendo Switch’s case, it only works to harm your immersion, but it’s also the only major issue thus far that cannot currently be solved.

Nintendo, on its support website, describes dead pixels as “a characteristic of LCD screens” and says that they should “not be considered a defect.” That means Nintendo will not be fixing them through warranty claims and that you could be stuck with your defective screen — and it isdefective — for good.

As Eurogamer points out, however, the company did fix original DS systems over a decade ago that suffered from dead pixels, so it’s possible that Nintendo will reverse its stance at some point in the future.

Due to the horsepower Nintendo has managed to pack into the tiny Switch console, you’ll likely notice the battery life is short when you play the most graphically impressive games. After just a couple hours of handheld play in a game like The Legend of Zelda: Breath of the Wildor Doom, the console will need to be recharged. As you likely have the AC adapter that came with your system hooked up to the dock, you either have to go behind your setup and remove it, let the Switch charge in the dock, or purchase a second AC adapter.

There is another option! Third-party accessories manufacturers have created their own Switch charging cases that allow you to play the system for more than twice as long as the standard battery would let you.

We’ve personally tested the SwitchCharge, which released in 2018 after a crowdfunding campaign. The charging case not only more than doubles the amount of time you can play the system on the go, but it also includes a much better kickstand and slots to hold two Switch cartridges. If you have a phone in need of a recharge, the SwitchCharge can even charge that, and you can recharge the case’s battery by plugging it into the Switch’s dock when not in use.

Another option is an external battery pack, like that you’d use for a smartphone or tablet. Be warned, however, that many batteries designed for smartphones don’t output enough juice to charge the Switch while you play it. You’ll see best results from battery packs that can dish out at least 18 watts of power. These packs use a USB Type-C standard called USB Type C with USB Power Delivery, or USB-PD. You’ll also need to keep this in mind when shopping for a backup or portable AC adapter.

More than two years into the console’s lifespan, an issue has begun popping up with surprising regularity: Joy-Con “drift.” The issue  occurs in the controllers’ analog sticks, which register movement when they are not being used — it’s an issue typically seen on worn controllers across various consoles, but it prevalence on the Switch is nearly unprecedented.

Until now, if your controllers started to act up, you’d have to try and fix it yourself, pay Nintendo to fix them, or replace them by buying entirely new controllers. However, Nintendo willreportedly repair Joy-Cons for freeif you’re suffering from the issue.

Contact the Nintendo team using the information we listed in the table at the beginning of this article. If all goes well, you should be able to obtain replacement Joy-Cons without any problems. If you’re someone who has gone through the repair process previously for your Joy-Cons, it should be relatively easy for you to request a full refund from Nintendo.

One of the best parts about playing Switch games is how simply you can share your successes and accomplishments on your social media pages. Regrettably, a Facebook error often prevents direct posts from the Switch platform, creating a problematic host for sharing through this method. This error is known through the designation Error Code 2801-7180, and it has left far too many Switch users exasperated for months now while the Switch team works to find a solution.

Nintendo has not solved this error just yet, leaving users waiting patiently (or not so much) for the issue to get the necessary fix. We suggest keeping a close eye on the Nintendo serverstatus pagethat provides daily announcements on all identified dilemmas. This is where they will post the solution once they figure it out. Since this is an issue between Nintendo and Facebook, this is one obstacle that you can’t solve on your own.