tft display sd card supplier

This touch screen module equipped with high resolution reaches to 480 x 320, Designed with a TF(Micro SD) card socket on the back of board so that you can conveniently insert a card. Touch screen is very sensitive, easy and convenient to use. Please notice that we have test code provided for you, because of the characters limitation, we can not list all code here, so plaese feel free to contact us to get them.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

KJ Size 2.8 (inch) Type TFT Driver chip ILI9341 or UC8230 or HX8347,please choose the one you need Resolution 320*240 (Pixel) Module interface 8-bit parallel interface Effective display area 57.6x43.2 (mm) Module PCB Size 78.22x52.7(mm) Working temperature -20 ° C ~ 70 ° C Working voltage 5V Power consumption is about 90mA Product picture Our company Inventory&Factry Packing Contact us

This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with an SD card slot, it allows to easily read full-color bitmaps from the SD card.

The module provides users with two wiring methods: pin header wiring and GDI (General Display interface). You can directly connect the display to a FireBeetle main controller using an FPC cable. Plug and play, easy to wire. Besides, the display supports a low refresh rate and offers a good display effect and strong versatility.

This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with an SD card slot, it allows you to easily read full-color bitmaps from the SD card.

The module provides users with two wiring methods: pin header wiring and GDI (General Display interface). You can directly connect the display to a FireBeetle main controller using an FPC cable. Plug and play, easy to wire. Besides, the display supports a low refresh rate and offers a good display effect and strong versatility.

This is a compact full-color graphic TFT LCD with SPI interface, plus an SD card socket. Resolution is 320 x 240, and it is based on the ILI9341 driver chip. It features a breadboard-friendly pin header for the LCD and a right-angle pin header for connecting to the SD card interface pins.

The screen is 1.77" diagonal, with 160 x 128 pixel resolution. The TFT library interfaces with the screen"s controller through SPI when using the TFT library. Refer to the screen"s data sheet for complete details.

The Arduino TFT library extends the Adafruit GFX, and Adafruit ST7735 libraries that it is based on. The GFX library is responsible for the drawing routines, while the ST7735 library is specific to the screen on the Arduino screen. The Arduino specific additions were designed to work as similarly to the Processing API as possible.

The TFT library relies on the SPI library, which must be included in any sketch that uses the scree. If you wish to use the SD card, you need to include the SD library as well.