lcd panel has a line across it for sale

TV screen lines are an irritating occurrence, and many different issues with the TV can cause them. This article will go over what causes this, whether or not you can fix it depending on the cause, and how to fix it.

When any part of a TV"s display gets damaged, corrupted, or is defective, it can cause lines to appear on the screen. Some TV parts that can cause horizontal lines to appear are the LCD panel, T-Con board, or row drivers.

Issues with these parts can happen for many reasons, and the way your lines appear can tell you a lot about what"s wrong. If the lines are new, one of these parts was likely damaged.

If you"re seeing colored horizontal lines, it may be because of the T-Con board. If other parts don"t seem to be an issue, this part of the TV could be causing the lines.

If lines appear on your TV, you"ll want to inspect the TV itself. You can fix some issues that cause lines to appear, but others may require a professional or a new TV altogether. Some of the most common causes of horizontal lines are:

LCD screen damage. The LCD provides your TV display with light. If you"re handy, you might be able to fix this by doing a little work with the insides of the TV, which you can read about below.

Other devices you"ve connected to the TV. They may also be having issues of their own or might not be compatible with your TV. In this case, you"ll have to inspect the device instead of the TV.

All these issues can be fixed, though it ranges in difficulty. If you"re unsure how to repair your TV, you may want to get the TV professionally repaired.

Knock or tap on the back of your TV. If the issue is with cable connections, this could solve the problem. It could also indicate a problem with your T-Con board. It won"t fix the issue, and the lines may reappear, but it can give some insight into the problem. If it"s your T-Con board, you"ll want to have T-Con replaced.

Change your TV"s settings. This step might work for you if the issue isn"t because of damage. First, try switching the TV input from different HDMI ports or AV ports. Doing this can rule out problems with specific inputs.

Run a picture test on your TV. It"s a built-in feature on newer TV"s which allows you to see if the TV display is corrupted. Doing this may look different depending on your TV, but generally, you can go into the settings and find a support option or just a picture test option.

Take a look at the LCD screen. If it"s damaged, you may want to get the screen repaired or replaced. It may be a less costly option than buying a new TV altogether.

Vertical lines on a TV appear for the same reasons as horizontal lines: loose cables and wires, screen damage, or a faulty T-Con board. Leaving the TV turned on for too long can also cause vertical lines.

The steps for fixing lines on your TV will also work to fix TV glitches like flicker and stutter. For example, check the cables and connectors and ensure there"s no issue with your input device.

If your TV screen looks blue, it could be faulty connections, a defective backlight, or incorrect color settings. Some LED TVs naturally have a blue tint, which you can offset by changing the color temperature.

To fix screen burn on a TV, adjust the brightness settings and enable pixel-shift. Sometimes playing a colorful video with fast-moving action for half an hour might help.

Ours is a Sony Bravia that is now over 10 years old. Several months ago we started noticing lines, especially on the left (our left) side of the screen. They’d go away after the tv warmed up. Then we started noticing it was darker on that side of the screen, but again, after the tv warmed up the screen would be normal. Then about two months ago it started getting worse and didn’t ever get completely better, even after the tv warmed up. So I watched some youtube videos that all talked about the ribbon cables becoming loose over time and to apply pressure along the top and see if that made it better, and if so, it was a loose cable and if you put electrical tape or something that would help keep the pressure, it would fix the problem. Hubby pressed along the top and sure enough, when he pressed in one spot on the left side suddenly the picture cleared up. Stayed good for about a week, then problems again, pressed again, fixed again. A week or so later, same problem, but this time when he pressed on it nothing got better.

So I decided to take the cover off and look at it better. As I was pressing on the tops of the ribbon cables that run down from the top of the frame, for a minute it got better but then suddenly there was a wide white vertical line, with a thin green one down the center of it, running down the front of the screen, and it was perfectly aligned with one of the cables. So now I still have the dark side of the screen, and some ghosting, and some lines, but now this bright white streak/line right down the front. Another weird thing is that if the whole screen is bright (like watching a show set in a snowy place) then the darkness even on the left side is basically gone, but if the scene is dark at all, that side is almost black. I don’t know if it means that particular ribbon cable is bad, or if something is loose, if things need to be replaced or what. It’s very frustrating as it’s been a great tv. Hubby wants to just buy a new one, but even if he does I would still like to try and figure out this one as it could then go in another room.

Vertical and horizontal lines on the best desktop monitors can ruin the immersive effect from your display, which is especially frustrating if you’ve invested into your monitor, like one of the best curved gaming monitors. To find out how to fix annoying vertical lines or horizontal lines on an external monitor, you’ll first want to test the picture to find out what causes these lines on the computer monitor, whether the problem is from the PC, cable box or another input source, or if the fault is with the monitor, its LCD panel or internal hardware itself. And while on the topic of “vertical” lines, there are vertical monitors that exist to help make certain professions or hobbies more efficient, like coding and streaming.

Before attempting any other troubleshooting, such as fixing black bars on the side of your monitor, the first step toward finding solutions for this desktop monitor problem is to isolate the source of the issue.

The first option is to test out the image on your favorite computer screen without any peripherals connected. To do this, disconnect all cable connections and use the remote control or the control panel to disconnect Bluetooth and WiFi, if your external monitor is so equipped. If there are no vertical or horizontal lines on the default picture or menu screen, then the problem is likely due to your PC or input device, or to your cable connections. If the lines still appear, then the issue is likely to be with the external monitor itself.

If the monitor shows lines when not connected to any cables or input method, the problem is likely with the monitor itself. Image issues such as lines can be caused by damaged internal ribbon cables or the LCD panel itself. If this is the case, the repair process will depend on what the hardware problem is, whether you have a flat or curved computer monitor. If you see light leaking on the edges of your monitor screen, you may have blacklight bleed, which you can learn about in our resource content on what is blacklight bleed.

If the lines go away when your external monitor has no input, then you’ll want to look for a connection issue or an issue with your PC or laptop’s graphics drivers, driver settings, or picture settings. Additionally, you may want to check for any input lag issues with your monitor at this time.

Make sure all cables are connected securely. A loose connector can cause various picture issues including gray lines, pink lines or green lines.You may want to unplug your monitor from the input device and check the condition of the ports. You may be able to see if there are any bent or broken pins in the connectors of these input terminals. Double-check the cables if you have two monitors. If you need more organization in your space, consider the best dual monitor mount. Don’t use a paperclip or other metal object to try and clear out a VGA terminal.

If you find a damaged part, you can either consult a repair service or professional repair technician, or you might want to fix it yourself using an electronics repair kit. Use caution when removing ports, and always unplug a monitor before working on a repair.You may need to consult the owners manuals to see what types of repair tools will be needed.If the cable is faulty, the solution may be just to buy a replacement cable. That may be the best path if you need to immediately fix your monitor and can’t spend time researching and repairing the damaged part on your own, like if you use your monitor for work like a monitor for video editing.

Look for any video card drivers or graphics card driver that has a yellow exclamation mark or question mark. These common error notifications may mean your laptop or PC graphics drivers are out of date. Many graphics cards offer a driver updater tool. You can also consider buying a new, updated graphics card.

Alternatively, you can run a system scan to discover errors and graphics driver software issues. If there is a problem with your graphics card driver, it may show up on a system scan. Try booting up in safe mode or BIOS, if available; this will often show whether the display issue is a software problem or a hardware problem.

Warning: Try booting up in safe mode or BIOS, if available; this will often show whether the display issue is a software problem or a hardware problem

A screen resolution adjustment may also help. If the device picture settings are not compatible with the monitor’s native resolution, you may see errors such as lines on the screen. On a windows PC, setting a display resolution or refresh rate that is not supported can damage a monitor.This is more often a risk with older CRT monitors.

Warning: If the device picture settings are not compatible with the monitor’s native resolution, you may see errors such as lines on the screen. On a windows PC, setting a display resolution or refresh rate that is not supported can damage a monitor

Explanation of why pulse width modulated backlighting is used, and its side-effects, “Pulse Width Modulation on LCD monitors”, TFT Central. Retrieved June 2012.

Back in April last year, Lionel blogged about a vertical line issue that could potentially affect customers who own 17" Inspiron 9200, 9300, and XPS Gen 2 notebook LCDs.

After engaging our engineering and product group teams, as well as the LCD manufacturer, to investigate and isolate the cause of this issue, we narrowed the problem down to a specific part within a certain date range. During that research, we found that the part may also affect the Inspiron 6000, 8600, Latitude D800, D810, and Precision Mobile Workstation M60 and M70 LCDs. That led to Lionel"s second blog post on the topic.

We"ve taken steps to contact those who may be affected to offer a warranty replacement and also put in place measures to rectify any out of pocket expense incurred by out of warranty customers who replaced the affected screens in the past.

Since then, comments have hit our forums and blog site about other potentially affected systems and possible causes and fixes for them. We"ve gone back to our engineering and product group teams and verified that the part causing this issue:

That said, there are other variables that can lead to vertical and horizontal lines on other system types regardless of size or model. Lines on an LCD can appear sporadically, at random places on the screen, and for what appears to be for no reason at all. These lines can be caused by normal LCD failures brought on by a multitude of variables, which I"ll try to cover here. Vertical lines tend to be a more common issue in notebooks, primarily because they are subjected to more wear and tear on a daily basis than a desktop LCD.

The most common cause of these lines is simply a loose connection. As notebook systems are carried around, no matter how careful we try to be, they have a tendency to be bumped, jarred, and even sometimes the heart stopping drop. Though today"s notebooks are designed to better absorb and dissipate small shocks, it can still have adverse affects on the notebook"s internal components. A good bump or series of bumps and random movements can cause the LCD cable to become loose. The connection remains intact, but some breaks in the signal can lead to impurities in the reproduction of the image on the screen. Think of a loosely-fastened garden hose… water will still be directed and outputted through the end of the hose, but some water is lost at the connection. This is easily fixed by tightening the hose. Similarly, the LCD can usually be fixed by simply making sure the connection is secure. (Service manuals for Dell systems can be found here on support.dell.com.)

A golden rule of any seasoned technician when it comes to cable connections: don"t just check the connection, reseat it. This applies to more then just cable connections (memory, wireless cards, hard drives, optical drives, etc…) There are a few reasons for this, the first being temperature. With so many components designed into such a small case, heat is inevitable. These temperature variations can lead to things like "chip creep" and oxidation. Removing the cable and firmly, but carefully reseating it should solve this problem by not only making sure that the connection is properly seated, but also that the pins are free from oxidation.

The second reason is debris. If you"ve ever opened up your notebook to clean the keyboard or for maintenance, you might see any number of things such as food particles, hair, paper, dirt and dust. Some of these objects are small enough to get into the connections and cause problems. This is one of the reasons that regular cleaning of your notebook and desktop PCs should be done. The problems caused by debris can usually be quickly cleared up by a can of compressed air and a little time and effort.

If these simple fixes don"t seem to work, then we need to look at the actual failure possibilities. Vertical or horizontal lines that don"t disappear after the basic troubleshooting are usually caused by circumstantial failures. The most common type of failure that leads to lines on the display is an open circuit connection between the driver IC (flexible circuit board) and LCD glass. This is usually caused by external stresses (mechanical, thermal, etc…), which causes the flex circuit to detach from the glass. The variables leading to the detachment are wide and are dependant on individual cases. With the amount of travel and various operating environments of a notebook, pinpointing the exact cause can be near impossible, unless of course the problem immediately follows a catastrophic event such as dropping the notebook or prolonged exposure to heat or cold, such as leaving the system in a car.

Investigations into technical problems, including which systems, batches, and date ranges are affected, are rigorous, and we strive for accuracy. Unfortunately, not every technical problem can be traced down to the root cause. But in every case, we try to proceed appropriately and in all fairness to affected customers.

If you are experiencing any problem with lines on your LCD and your system is not one of the potentially affected units, or in the date range outlined in Lionel"s earlier posts, please contact technical support to troubleshoot and identify possible fixes. See below for details on how to do that.

LCD display screens on notebooks, monitors and TVs alike are made up of two thin layers of glass containing liquid crystal material between them. When the glass becomes damaged, debris infiltrates the crystal layer or another issue occurs with the display function, this causes vertical lines of color to appear when the monitor is fully illuminated. These lines are either permanent due to internal failure or temporary due to faulty display connections.

Diagonal, jagged and both horizontal and vertical lines typically indicate panel damage. A single set of horizontal lines could indicate damage, a graphics system failure, or loose internal video cables. Broken signals from cables or graphics hardware creates impurities in reproducing an image on an LCD screen, conditions that often manifest in the form of vertical or horizontal lines of color.

If the lines are infrequent in their appearance, or are not permanently visible, a loose video cable is often the problem. As devices are carried, dropped and bumped, cables become loose even in laptops. Laptops are built with casing to absorb and dissipate small shocks, but even some bumps can cause cables to become loose. Even televisions and monitors, while often stationary, can still have loose cables if not properly seated.

If you"ve ever opened your laptop to clean underneath the keyboard, you might see numerous things like food particles, hair or even dust. On the rear of monitors and televisions, they also contain a series of holes or slits that dust can creep into the inner workings and cause problems. Regularly cleaning out a laptop"s keyboard and dusting off the rear of a monitor or television can greatly extend its useful life. This is a preventative measure and rarely works in removing any existing lines on a screen.

The first step in troubleshooting is determining the extent of the damage. For external monitors or televisions, re-seat any video input cables or consider replacing the cables with new ones. Should the lines continue to display, this indicates an internal failure, something few consumers are able to fix on their own. Instructions exist online for individual products to disassemble a monitor, laptop or television to replace broken parts, but the most suggested course of action is shipping it to the manufacturer for a warranty repair. If no warranty is active for the device, consumers are then advised to replace the device entirely with a new one, as this is usually the cheapest solution. Lines on an LCD panel indicate the LCD screen or screen ribbon cable need to be replaced, parts that can cost several hundred dollars.

Ryan Goodrich has been writing technology and technical articles for a vareity of online and service-based companies since 2008. He"s written content for websites like TopTenREVIEWS and TechNewsDaily, in addition to many other website. He holds a Bachelor of Science in English and a master"s degree in communication and works as a technical writer.

This problem occurs because of a hardware limitation that is known as "tearing." Tearing is a video artifact in which the top portion of the screen shows a different frame of video than the bottom portion. This is more noticeable during scenes that contain fast motion. There may be a noticeable horizontal line at the point where the two frames meet.

When it is playing video content such as a DVD, the operating system has to synchronize playback with the display redraw rate. The video frame is updated during the vertical blanking interval so that the complete, correct frame will be displayed without any tearing every time that the video card refreshes the monitor.

When windows synchronizes DVD playback with the monitor refresh rate, it synchronizes with the timing of the primary monitor. This is determined by the video driver. Some video hardware supports multiple monitors but does not synchronize the display redraw timing of the two monitors. Even though the two monitors are configured for the same refresh rate (for example, 60 Hz), the second monitor may not be refreshed at the same time. In this case, there may be unavoidable tearing on the second monitor.Resolution

If the computer system meets the hardware and software requirements to run Windows Aero, you may be able to reduce or eliminate the problem by enabling Aero. Otherwise, set the display to PC Only or Extended. For more information about Aero, go to the following Microsoft website:

If your computer does not meet the requirements for Aero, set the display to PC Only or Extended. For information about how to change this setting, go to the following Microsoft website:

If you experience noticeable cut lines or tearing, and not only when you play a DVD movie, the display may be configured to a refresh rate that one of your monitors does not support. If this is the case, you can resolve the issue by configuring the display to a refresh rate that is supported by all monitors.

Select a resolution and refresh rate that is supported by all monitors. (Your monitors may support multiple refresh rates. See your manufacturer"s documentation for information about the settings that your monitor supports.)

- If the power cord is connected to a surge protector or power switch, remove the cord from that device and connect it directly to the outlet. This is for testing purposes. Removing such devices assists in determining if the light display or the white lines on the LCD are related to the device or the Brother machine.

NOTE: To protect the customer"s investment against power surges and lightning, Brother strongly recommends that they connect the Brother machine to a surge protector. In particular, we suggest that they use a surge protector that is compatible with both standard A.C. power cords and telephone line cords. Surge protectors equipped with telephone jacks will assist in insulating the machine from any power surge that might travel through a telephone line.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

If the screen flickers, make sure the display settings in Windows match the native resolution and refresh rate for the display. Find the native resolution of a flat panel display on the box, in the specifications, or in the printed material that came with the display. Some common native resolutions are 800 x 600, 1024 x 768, 1920 x 1200, and 1680 x 1050. The most common refresh rate for LCD displays is 60 Hz. This normally cannot be changed for flat panel displays using Plug and Play settings. However, if you are using special video software to increase or decrease the refresh rate, change the refresh rate to match the default refresh rate specification of the display.

If your screen flickers in Windows 10, it is usually caused by incompatible apps or display drivers. To find out whether an app or driver is causing the problem, check to see if Task Manager flickers. Then, based on that information, you"ll need to either uninstall the app or update the display driver.

Otherwise, you can get the latest updated video drivers from the video hardware manufacturer"s website. The following list shows some of the video hardware websites:

If you cannot select the native resolution after updating the video drivers, the graphics adapter in the computer might not support that resolution and might need to be upgraded.

Check the video cable connections. Unplug the cable and inspect the cable for damage. If the cable is damaged, replace it with a new cable. Try to use cables less than 3 meters (10 feet).

Check the environment around the display. Displays are sensitive to magnetic fields. Speakers, florescent lights, fans, cell phones, radios, and any other electrical device can cause flickering. Temporarily move electrical items away from the display to see if they is producing a field that causes the flicker.

To see if the video coming from the computer is causing the problem, temporarily connect the display to another computer, such as a notebook computer.

If the flicker is gone when the display is connected to another computer, the graphics adapter hardware on the first computer might need to be upgraded to use the display.

Apple has determined that some iPhone X displays may experience touch issues due to a component that might fail on the display module. An affected device may exhibit the following:

Choose one of the options below to have your iPhone X serviced. Your iPhone will be examined prior to any service to verify that it is eligible for this program.

If your iPhone X has any damage which impairs the ability to complete the repair, such as a cracked screen, that issue will need to be resolved prior to the service. In some cases, there may be a cost associated with the additional repair.

How long will your LED display last? In nearly every industry, from retail businesses to concert halls to corporate centers, decision makers need to evaluate the return on investment (ROI) of their LED signage. In most cases, potential buyers go straight to the obvious place: the LED manufacturer’s spec sheet. The industry standard for LED lifespan is 100,000 hours, or about 10 years, and most people assume that’s how long their display will last. But it’s not quite that simple.

The 100,000-hour figure assumes that every diode will be running at full brightness, consistently — which, on an LED screen, is virtually never the case. The lifespan figure can also be misleading because it indicates when a diode degrades to half-brightness, not completely dark. Many other variables affect an LED display’s lifespan; you can’t rely solely on the number on the diode spec sheet.

“The reality is, your screen can often last significantly longer than 100,000 hours,” says Kevin Izatt, a senior product manager in Samsung’s Display division. “We’ve had displays that have been up for 15-plus years with more than adequate brightness. Because the diode is actually only one factor in the lifespan of your LED display.”

The biggest contributor to diode degradation is heat. As you increase a diode’s brightness, it produces more heat. Your display’s physical environment also contributes to the temperature of the diodes, especially for outdoor displays.

“Let’s say you’re in Vegas — Death Valley. The diode is fine to operate at those temperatures, but it will degrade faster,” says Izatt. “Temperature is a big factor — and not one you have control over.”

The quality of your display’s power supply — and how hard it drives the diodes — can have a significant impact on your screen’s lifespan. The other components being powered, such as fans and electrical components, have their own lifespans as well, which are also impacted by the power supply.

“Fans are mechanical; they break down,” explains Izatt. “And similar to your computer, the electrical components don’t last forever. Together, these factors all contribute to the lifespan of an LED display. Looking at just the diode lifespan doesn’t give you the complete story — almost always, another part will go out first.”

“Something like airflow is very important,” says Izatt. “You need a screen that has good cooling, and a design that allows heat to flow out of the back through vents.”

It’s easy to see why: The circuit boards powering the display release heat, and that heat needs to go somewhere. Without a strong design, thermal stress will degrade the life of the display, except for the highest-quality parts — optimal conditions notwithstanding.

“Lots of variations on the color and brightness you use will impact the life of the diode,” explains Izatt. “For instance, black doesn’t use any of the diodes at all. And if your content is using lots of gray, that’s a much lower power output than white.”

That’s not to say you should hold back on displaying rich, vibrant colors — after all, that’s what LED does best. But it does factor into your product’s life expectancy.

To help businesses transition from LCD to longer-lasting LED signage, Samsung has launched a trade-in program. Samsung will come on site to remove your existing display and provide a discount on a new LED bundle kit.

Traded-in LCD displays that are still operating will be refurbished and resold, and your business will receive a cash rebate. Nonworking displays will be recycled and their parts reused.

You can’t rely on the number on the diode spec sheet; the lifespan of your LED display depends on many more factors. “Overall quality has a tremendous impact on the life of the display that diode specs just don’t take into account,” says Izatt. Your best bet is to look at the purchase holistically and invest in a top-tier product.

As you plan your LED signage rollout — or an upgrade — learn how to configure and tailor your screens’ real-time messaging with an integrated CMS in thisfree guide. And if you haven’t decided what kind of display is best suited to your current project, compare all ofSamsung’s LED displays.

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

From cinema content to motion-based digital art, Planar® Luxe Displays offer a way to enrich distinctive spaces. These professional-grade displays provide vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior decor.

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

LED video wall solution with advanced video wall processing, off-board electronics, front serviceable cabinets and outstanding image quality available in 0.9mm pixel pitch

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

Carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility for various installations including virtual production and extended reality.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

Since 1983, Planar display solutions have benefitted countless organizations in every application. Planar displays are usually front and center, dutifully delivering the visual experiences and critical information customers need, with proven technology that is built to withstand the rigors of constant use.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.