nzxt lcd screen quotation

This All-in-One (AIO) liquid cooler is ready for high performance CPU"s with the ability to fit in most cases. Show CPU/GPU temperatures or customize with GIFs with the Kraken Z LCD display.2.36” LCD screen capable of displaying 24-bit color

This All-in-One (AIO) liquid cooler delivers the highest cooling potential of any Kraken. Show CPU/GPU temperatures or customize with GIFs with the Kraken Z LCD display.2.36” LCD screen capable of displaying 24-bit color

This All-in-One (AIO) liquid cooler is designed with the ability to fit comfortably in most cases. Show CPU/GPU temperatures or customize with GIFs with the Kraken Z LCD display.2.36” LCD screen capable of displaying 24-bit color

Do you need to have a gif running on your AIO while it cools your CPU? Heck no. But if you feel like treating yourself by being able to customize your build to the fullest extent I think the NZXT Kraken Z73 is a piece of tech you should be looking at. While it may do the same thing as every other AIO at x2-3 the cost, it is the only one on the market that I am aware of that allows you to easily add a gif or image to the front of your AIO so that your PC build feels that much more custom and personable. I highly recommend this for anyone who feels like splurging and has the extra cash to dish out for a fun piece of tech, you won"t regret it.

As a side note as well the NZXT software you install on your computer to customize the LCD and monitor different settings is very clean and easy to maneuver through.

A new and improved version of the NZXT Z73 all-in-one CPU liquid cooler now with a 2.36” LCD screen capable of displaying flow rate, temperature, and a CPU clock speed readout.

Designed for noise level silent running the NZXT Kraken Z73 360mm features a larger CPU liquid cooling loop, lower RPM fan, and Zero RPM Mode for almost silent operation.

The CAM software interface allows you to intuitive control all aspects of your CPU liquid cooler with LCD display from monitoring, overclocking, and fine tuning.

The NZXT Kraken Z73 RGB 360mm Liquid Cooler with LCD Display RL-KRZ73-R1 is an all-in-one (AIO) liquid cooler that is designed with the ability to fit comfortably in most cases. Show CPU/GPU temperatures or customize with GIFs with the Kraken Z LCD display.

There"s no shortage of all-in-one (AIO) CPU water coolers, but NZXT has always been among the top-rated in terms of design and performance. Instead of relying on simply air to cool down your CPU, an AIO utilizes a liquid to transfer heat from the processor to a radiator, which has fans attached to it to dissipate.

Compared to traditional air coolers, these are an excellent middle-ground between them and an all-out custom water-cooling loop. The new Kraken Z63 and Z73 take everything to the next level with a new LCD display, plenty of headroom with a 280mm or 360mm radiator, improved pump design, and support for the much-improved CAM software.

$280(opens in new tab)Bottom line: The latest Asetek pump matched with a new LCD display and large 360mm radiator make this one of the best AIO coolers around.

NZXT is embracing the RGB craze in system building with the release of the new Z series all-in-one (AIO) CPU coolers. The Z73 is the larger version of the Z63, sporting a 360mm long radiator (compared to 280mm) with three NZXT 120mm static pressure fans instead of just two 140mm blades.

Not only do you now have one of the better-looking AIO coolers on the market — and there are plenty of AIO coolers available on the market right now — but with the addition of an addressable LCD display for a unique touch to the overall PC aesthetics. It"s possible to display the temperature of the liquid, other stats, or even an image.

In order to get the most out of the Kraken Z63 and Z73, you need to have NZXT"s CAM software installed. This piece of kit has been lambasted in the past from the community for shipping to NZXT PC statistics and other data, being sluggish to use and downright unreliable.

The most recent version has improved dramatically, though we weren"t able to get CAM to play ball with either of our Kraken review samples. (The joys of using pre-release builds.) Still, with the software and AIO installed, you can control fan speeds, as well as what"s displayed the LCD display. Still, even though I wasn"t able to Rick Roll the AIO, performance could still be measured.

With the rather large 280mm and 360mm radiator setup for the Z63 nd Z73, NZXT has been able to largely distance itself from such problems. Our testing setup included the following hardware:CPU: Overclocked AMD Ryzen 9 3900X(opens in new tab)

While you could run the Z63 and Z73 without CAM, you shouldn"t. You"re not only paying a premium for the performance, design, and warranty, but also that sweet new LCD display, which requires the software to configure. CAM is also still Windows-only.

The NZXT Kraken Z73 is an ideal purchase for those with Intel Core i5 and AMD Ryzen 7 processors or above. Should you have plans to kit out your PC with processors that rock ten or more cores, you"ll want to have the 360mm radiator at hand for adequate heat dissipation. What"s more, is this AIO isn"t just great at keeping the CPU cool, it also looks good.

The Z63 is a great choice for a similar processor range, though if you partner it up with power-hungry CPUs, be prepared to see a slight increase in temperature and noise from fan curves. NZXT nailed the design of the Kraken coolers, and this latest family of Z AIOs do nothing but improve the aesthetics of any PC build, thanks to the LCD display. Forget RGB lighting. Addressable displays are where it"s at in 2020.

The NZXT Kraken Z73 is an expensive cooler. There are no two ways about that. But should you want a smart-looking AIO that can handle even overclocked 12-core processors, this is it.

The NZXT Kraken Z63 has everything the larger Z73 sibling has, but comes with a slightly smaller radiator and one less fan, but does slash the price considerably.

NZXT’s latest flagship Kraken Z73 AIO represents a new generation of liquid coolers from a company already known for its quality and striking visuals. Armed with a trio of powerful fans and a new 7th- gen pump, this 360mm model makes a stunning visual statement with its active LCD face displaying a myriad of system statistics, like registered CPU and coolant temperatures or even customized logos, radiating forth from atop your CPU in pure digital bliss.

Priced at $279.99, the NZXT Kraken Z73 commands a premium for its digital LCD fireworks and a cooling performance punch that rivals the best AIOs -- and even some custom cooling loops we’ve tested. For those system builders who strive to reach the peak of thermal excellence and can’t get enough of that integrated, jaw-dropping LCD display, the Kraken Z73 is second to none.

As any enthusiast cooling system should, the NZXT Kraken Z73 ships with mounting hardware for nearly all current mainstream and high-end desktop (HEDT) processors, from both sides of the great CPU silicon chasm (Intel and AMD). Just note that if you want to chill your threadripper, you’ll need to get an optional bracket from NZXT.

The heart of the Kraken Z73 is a 7th-gen pump that promises better flow and reliability. The familiar NZXT reflective face actually hides a 2.36 inch (60mm) diameter LCD display for real-time reporting of CPU or liquid temperatures, and even has the ability to manage your own custom image or animated GIF.

NZXT provides three 120mm AER P120 fans with fluid-dynamic bearings to muster air through the 360mm aluminum radiator. Each of the 2000RPM (max) fan blades has a bit of an upturned winglet near the tip and is surrounded by a contrasting molded shroud.

Installation of the NZXT Kraken Z73 is very manageable and similar to most other AIOs on the market, assuming the chassis in question supports a 360mm radiator. The length and flexibility of the sleeved tubing and swivel fittings allows for a multitude of different mounting options to suit your needs.

The NXZT CAM software allows for selection of the LCD display as well as multiple system sensor reports from the UI. Fan and pump speeds can be managed using either a curve ramp or manufacturer-defined performance settings.