samsung s9+ lcd screen replacement factory

If you"ve dropped your Samsung Galaxy S9 and cracked the screen, finding an S9 screen replacement can help repair your phone and get it working right again. You can choose from a large range of S9 LCD screens on eBay that are compatible with your phone. Before you start your search, you should consider this information to help narrow down the options.

Screen size: The S9 has a 5.8-inch screen, while the S9+ has a larger screen at 6.2 inches. You will want to make sure that you choose the right size for the Samsung Galaxy S9 screen.

Color: You can choose between colors such as black, blue, gold, and purple for the digitizer or glass screen. You should select a color that matches the back of your phone for uniformity.

Condition: You can choose between new, open box, and refurbished Galaxy S9 LCD screen replacements. Some phones that are broken are sold for parts and with the right tools you can break down the cell phone and use the parts with your existing phone.

The glass screen makes up the outer layer of the Galaxy S9 screen. The digitizer sits below the glass screen and controls the touch functions of the screen. The S9 LCD is the bottom-most layer and is what shows the images on the screen. In most cases, a cracked screen will usually be the glass layer or digitizer.

The LCD screen itself will generally be the most expensive of the three types to replace. These will be available as OEM options in both new and used listings. The digitizer and glass screen will be the cheapest options to choose from due to a large number of unbranded digitizers and glass screens available. Some of these kits will also contain the tools needed to remove the old digitizer and replace it with a new one as well.

Screen appears to be of similar quality to the OEM screen. It is clearly an OEM panel with replaced glass. The biggest problem is that there was some debris that got in between the new glass and the display while they were gluing them together. There"s a little pimple on the top left corner. It"s only visible at different angles, but now that I have found it I know it will bug me. At least it"s not in the center of the display.

Note: This guide instructs you to replace only the display while leaving the original frame, motherboard, and battery in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure—transplanting your phone"s internals and installing a new battery. Make sure you have the correct part before starting this guide.

This guide involves removing the rear glass cover; you will need replacement adhesive to reattach the back cover to the phone. If your replacement display does not come with adhesive, use a strong double-sided tape such as Tesa 61395 to secure it.

Opening the Samsung Galaxy S9 will damage the waterproof seals on the device. If you do not replace the adhesive seals, your phone will function normally, but will lose its water protection.

If the frame is damaged or bent, it"s important to replace it, or else the new screen may not mount correctly and can suffer damage from uneven pressure.

In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.

No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.