m5 vertical lcd display manual in stock

Reference the LCD Display Operations table in this manual for instructions on how to perform various operations using these buttons and, when applicable, other components of the bike.

we focus on the EV industry for 6years, mainly aims to provide high quality electric bike, scooter, tricycle, ATV, and parts for EV conversion, such as display /instrument for EV /motorcycle, controller, motor, battery, charger, tyre,throttle and so on

I have found that an off the shelf Nakto M5 display without Aventon firmware works just fine! The display isn"t terminated to the Higo/Julet 5 pin male connector, but I can remove the back cover + wires of the old display and solder those onto the new one, or I can splice on the extension cable I bought.

Turns out the controllers used here are using Kingmeter 618U / J-LCD protocol. I verified this by hooking up the new and broken old display to a logic analyzer and found the protocols to match this library https://github.com/MichaelFabry/Ard...uino_Pedelec_Controller/display_kingmeter.cpp

I messed around with P05 and found out that some of the higher level PAS settings (This display went alphanumeric on me!) just made the bike drive itself forward, way faster than the walk mode!

P06 is normally in inches, but in this instance it maps to the default tire settings available. Follow the order in your Aventon user manual from smallest to largest, number 4 is 24". The 618U protocol has the display state wheel size every packet, I confirmed these map between displays. The kingmeter library above also shows this order.

I"m uncertain if P07 is actually 16, I need to do some real world testing, but this setting doesn"t leave the display and Shengyi doesn"t list this specific model online. However, their similar models all have 16 pole pairs, so I believe this is correct.

P14 makes no difference here! The controller we have internally limits to 22A. The display does not echo this setting back to the controller, I did not see any changes in the packets. The controller also does not report current to the display, this field was always 0. I set this to 1A and noticed no difference.

P20 is usually listed as "Alternate" or "Standby" in product listings for this screen and others with the same style settings where P20 decides protocol. I think this display is a Kingmeter Nokee-U knock-off, so it would make sense to not broadcast the name of the protocol.

DISPLAY MANUAL LCD-M5 HAND CONTROL PANEL OPERATION INSTRUCTIONS ONLY TO BE ASSEMBLED BY A SKILLED BICYCLE MECHANIC. Read all instructions carefully before using this product. Retain this owner’s manual for future reference.

II. FUNCTION DESCRIPTION 1. DISPLAY FUNCTION. Show Content Introduction. Speed display, power level display, power indicator, failure warning, total mileage, 3.1 BATTERY POWER DISPLAY. single mileage, single driving time display. 2. CONTROL - SETTING UP FUNCTIONS. Battery Power switch control, 6Km/h point control, wheel diameter setting, maximum speed setting, idle automatic hibernation time setting, backlight brightness setting, voltage level setting.

III. KEY INTRODUCTION. The specific combination of keys is as follows: When riding, you need to modify the power/speed file, short press. Toggle display data for multi-function areas during cycling, short click. Single key length is mainly used to switch the mode / switch state.

انواع نمایشگر و صفحه کیلومتر دوچرخه، موتور و خودرو‌‌‌‌های برقی با مانیتور LCD و LED دیجیتال و آنالوگ با قابلیت‌‌‌‌های نمایش سرعت نهایی، مسافت پیمایشی، تنظیمات کنترلر و نشانگر‌‌‌‌های علائم حرکتی

The eligible products that may be ordered through the Service (the identity of which are subject to change) are set forth on the product detail page on the Canon Direct website (shop.usa.canon.com) with the option to select the Service displayed (each, an "Eligible Product"). Your participation in the Service is personal to you, and you may not assign or transfer your enrollment, or any of the benefits of the Service, to any third party without our authorization. The Service is only available to customers with shipping addresses in the 50 United States and the District of Columbia.

Discounts and any limited time promotions associated with the Service apply only to Eligible Products displaying the offer message on the product detail page on the Canon Direct website (shop.usa.canon.com). Discounts and any amounts from limited time promotions that apply to your order, if any, and which are still in effect, will be automatically deducted from your order.

The Canon Online Store will accept, for return or exchange, defective or unopened merchandise purchased at the Canon Online Store, subject to the exceptions and timeframe for returns listed below: All merchandise returned to the Canon Online Store must be in the original packaging with all original items (such as manuals, cables, etc.) accompanying the merchandise and a copy of the invoice/packing slip included to be eligible for return or exchange. Shipping and handling fees from your original order will not be refunded, unless the merchandise is determined by the Canon Online Store, in its sole discretion, to be defective.

Make sure that you are familiar with the functions of all buttons and the meanings of the display information by referring to the content in the relevant sections of the electrical system.