china 3.5 tft lcd shield quotation

Formike 320x480 Touch LCD 3.5 inch TFT Display Q: Does your product have any warranty9 A: Yes, we offer 12 months warranty for our products. Q: What"s your payment method9 A: We usually accept the payment methods include T/T, Western Union and Trade Assurance. For large quantity orders we ship by buyer"s cargo agent in China, we can also ship by Air transportation or sea transportation.

ER-TFTM035-6 is 320x480 dots 3.5" color tft lcd module display with ILI9488 controller and breakout board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 8-bit /9-bit/16-bit /18-bit parallel ,3-wire,4-wire serial spi interface.Built-in microSD card slot, optional 3.5" 4-wire resistive touch panel with controller XPT2046 and capacitive touch panel with controller FT6236, so you can detect finger presses anywhere on the screen and doesn"t require pressing down on the screen with a stylus and has nice glossy glass cover . It"s optional for font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested. Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 3.5"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

FormikeGroup was founded in 1999, which engaged in R&D, design, manufactureand sales of LCD display solution, Wi-Fi / Bluetooth Module, Smart Watch as well asaccessories of cell phone.

Ourexperienced technical on OEM and ODM and managerial personnel, strict qualitymanagement system, competitive prices ensure that we always be at the forefrontof LCD, Wifi Module, Smart Watch and accessories of cell phone industry.

Our new line of 3.5” TFT displays with IPS technology are now available! With In-Plane Switching (IPS) technology, these displays are capable of truer color reproduction, more consistent color from any viewing angle, and sunlight readable screens due to their brighter backlights. It’s clear to see why IPS is the most superior of TFT display types.

In addition, these 3.5” IPS displays do not lighten or have tailing when touched, making them ideal for use in touchscreen devices. Three touchscreen options are available including capacitive, resistive or without a touchscreen. There is an additional resistive touch model available as an EVE2 module. This advanced TFT module is assembled to a custom PCB that offers an all-in-one solution for managing graphics, touch, and audio with the graphic engine made by FTDI/Bridgetek. These HMI displays provide a lot of powerful capabilities and are now finally available in a 3.5” size IPS TFT screen. Added design improvements of this new IPS TFT line include better EMC with built-in EMI shielding and a better FPC design that is more durable with a larger bendable area and smaller component area.

Finally, these new 3.5” IPS displays offer a replacement option to the TN models due to their same mechanical footprint and pinout. However, they are not a drop-in replacement due to the differences in the software timing requirements of the old and new driver ICs used within these displays.

We"ve been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Tft Lcd Panel, Tft Information Display, Round Lcd Display, Led Tft Display,Lcd Counter Module. Honesty is our principle, skilled procedure is our perform, service is our target, and customers" satisfaction is our long term! The product will supply to all over the world, such as Europe, America, Australia,Wellington, Tunisia,New York, Mauritius.It using the world"s leading system for reliable operation, a low failure rate, it suitable for Argentina customers choice. Our company is situated within the national civilized cities, the traffic is very convenient, unique geographical and economic conditions. We pursue a people-oriented, meticulous manufacturing, brainstorm, build brilliant" business philosophy. Strict quality management, perfect service, reasonable price in Argentina is our stand on the premise of competition. If necessary, welcome to contact us by our website or phone consultation, we will be happy to serve you.

In this Arduino touch screen tutorial we will learn how to use TFT LCD Touch Screen with Arduino. You can watch the following video or read the written tutorial below.

As an example I am using a 3.2” TFT Touch Screen in a combination with a TFT LCD Arduino Mega Shield. We need a shield because the TFT Touch screen works at 3.3V and the Arduino Mega outputs are 5 V. For the first example I have the HC-SR04 ultrasonic sensor, then for the second example an RGB LED with three resistors and a push button for the game example. Also I had to make a custom made pin header like this, by soldering pin headers and bend on of them so I could insert them in between the Arduino Board and the TFT Shield.

Here’s the circuit schematic. We will use the GND pin, the digital pins from 8 to 13, as well as the pin number 14. As the 5V pins are already used by the TFT Screen I will use the pin number 13 as VCC, by setting it right away high in the setup section of code.

I will use the UTFT and URTouch libraries made by Henning Karlsen. Here I would like to say thanks to him for the incredible work he has done. The libraries enable really easy use of the TFT Screens, and they work with many different TFT screens sizes, shields and controllers. You can download these libraries from his website, RinkyDinkElectronics.com and also find a lot of demo examples and detailed documentation of how to use them.

After we include the libraries we need to create UTFT and URTouch objects. The parameters of these objects depends on the model of the TFT Screen and Shield and these details can be also found in the documentation of the libraries.

So now I will explain how we can make the home screen of the program. With the setBackColor() function we need to set the background color of the text, black one in our case. Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center of the screen and 10 pixels  down the Y – Axis of the screen. Next we will set the color to red and draw the red line below the text. After that we need to set the color back to white, and print the two other strings, “by HowToMechatronics.com” using the small font and “Select Example” using the big font.

Kingtech 3.5inch 240x320 TFT LCD display supply very stable. This 3.5inch supports SPI+ 18 BIT interface. In addition, the 3.5inch QVGA TFT is transflective, it can be sunlight readable. The 3.5inches module can custom resistive touch and capacitive touch according to the customer requirements. The 3.5inch vertical 262K color LCD screen can be used in medical, industrial, hand-held, e-bike, outdoor and others.

The 3.5inch QVGA transflective TFT LCD display module can be used for medical, industrial, hand-held, e-bike, POS machines, E-bike, outdoor, and others.