uctronics hdmi lcd touch screen raspbian manufacturer

The UCTRONICS 3.5 Inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well-mates with the Raspberry Pi boards. With a tiny size, vivid image, and responsive touchscreen, it is definitely ideal for portable devices and multimedia projects. It is a great replacement for a heavy and bulky HDMI monitor, keyboard, and mouse

Step1: Align the pin 1 of the edge connector between the LCD display and Raspberry pi board, connect the pin 1,2,3,4 then pin 19,20,21,22,23,24,25,26.

Attention: If you want to use the touch function, you need to download and install the driver manually refers to the instructions we provided. The driver includes the settings of the Raspbian OS resolution and touch screen support.

Attention: If you use this display without a Pi, the touch function is not available because the touch function of this display just supports the Raspbian system. Meanwhile, an extra HDMI cable also is required for the video transmission.

In order to meet the increasing need of compact HDMI displays, especially for some popular single-board computers like the Raspberry Pi, the UCTRONICS team now releases a 7-inch HDMI LCD display with capacitive multi-touch touchscreen.

In order to meet the increasing need of compact HDMI displays, especially for some popular single-board computers like the Raspberry Pi, the UCTRONICS team now releases a 5-inch HDMI LCD display with capacitive multi-touch touchscreen

Visibility is... rough. The panel used appears to have originally been designed for a vertically oriented use, but it"s a TN display. The net result is that half the screen is brighter than the other when viewed dead-on from the center. Viewing angle is extremely biased towards one side of the screen.

There"s a tad bit of overscan on the side with the fatter border (I"m driving the screen at 800x600 at the moment), so adjust your Pi"s config to suit.

Also, seriously, don"t drive this higher than 800x600 if your use case lets you control the input resolution The screen is way too small and way too low resolution (480x320!) to be useful beyond that. UI elements and text are baaaaaarely usable at 800x600.

Overall, it"s easy, reasonably well designed, and the worst issues of the lot are the rather awkward viewing angles and the screen tearing.. It"s not very expensive, takes HDMI, and fits perfectly (like, it"s actually perfect) onto a Pi 2 or 3.

The 3.5 inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice.

The on-board button near the micro USB connector can be used to turn the backlight on and off. Screen rotation is not supported  for this specific item.

1pcs 3.5 inch HDMI touch screen1pcs touch pen1pcs HDMI to HDMI converter3pcs heat sinks for Raspberry Pi board1pcs Micro HDMI to HDMI AdapterNote: The raspberry pi shown in the picture is not included!

Wide Compatibility: The case is designed to perfectly house Raspberry Pi 4 B, 3 B/B+ with a small touch screen. NOTE: Raspberry Pi motherboards are not included.

Features: 480 x 320 display resolution (HDMI input resolution supports 480*320 to 1920*1280); Refreshes up to 30 frames per second; 3.5mm audio/headphone jack; The backlight can be adjusted and turned on/off.

Plug & Play: Don"t need to reboot the Pi when connected, it doesn"t require any external power supply, and it displays with no need for the driver. Please note the touch function needs to install the driver.

Lightweight and Portable: the overall dimension of this tiny screen with enclosure is 3.66" ×2.48" ×1.18", and the delicate design and mini stylus make this kit completed and convenient to use.

If you want to use the touch function, you need to download and install the driver manually refers to the instructions we provided. The driver includes the settings of the Raspbian OS resolution and touch screen support.

In order to meet the increasing need of compact HDMI displays, especially for some popular single-board computers like the Raspberry Pi, the UCTRONICS team now releases a 5-inch HDMI capacitive multi-touch touchscreen with stand.

Step1: Align the pin 1 of the edge connector between the LCD display and Raspberry pi board, connect the pin 1, 2, 3, 4 then pin 19, 20, 21, 22, 23, 24, 25, 26.

Attention: If you want to use the touch function, you need to download and install the driver manually refers to the instructions we provided. The driver includes the settings of the Raspbian OS resolution and touch screen support.

The UCTRONICS 3.5-Inch TFT LCD Touch Screen w/ Pen for Raspberry Pi is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice.

When using the Raspberry Pi as a server or industrial monitoring device, it is naturally inevitable to be combined with a touch screen. This article will explain in detail how to connect an external capacitive touch monitor with Raspberry Pi, and execute the touch calibration program to obtain more sensitive and precise touch operation.

The 3.5 inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice. FeaturesTouch function support system: Raspbian. Display function support system: Raspbian, kali, ubuntu, Retrope, PiPlayer, windows10 etcLCD Resolution: 480 x 320 pixelsHDMI Input Resolution support: 480x320 ~ 1920x1280Dimension: 55.98 x 85.60 mmSupport plug and play, touch screen, game and videoAutomatic driver installation scriptPackage Including1pcs 3.5 inch HDMI touch screen1pcs touch pen1pcs HDMI to HDMI converter3pcs heat sinksNote: The raspberry pi shown in the picture is not included!

1) Support Raspberry Pi 3 Mode B, Pi 2 Model B, Pi B+. This kit includes a 3.5 inch touch screen, a touch pen and 3 heat sinks. (Raspberry Pi main board shown in the picture is not included)

5) Software package contains everything you need to start, including calibration software and virtual keyboard. NOTE: you need to download and install our Raspbian system with LCD driver on your own SD Card