dry water between lcd touch screen made in china

You can get your phone touchscreen fixed if it gets damaged by water. It is frustrating to have an impaired touchscreen. However, you will have a clue on how to fix touchscreen not working after water damage. The phone touchscreen is responsible for receiving inputs from external touches. Water can find its way through the display screen when caught in the rain or a shower. Subsequently, the touchscreen is susceptible to damage from contact with the water.

you do not have to be extremely worried. The line below explains how to fix the damaged touchscreen. Read through the guides to understand what you need to know now.

The phone hardware is the visible part of your phone that can become spoiled by water. One of the phone hardware constituents is the touchscreen. If your touchscreen gets damaged by water, you should shop for a new replacement.

The phone screen is a delicate part that needs handling with utmost care. If your phone touchscreen is water-damaged, the entire screen of your mobile phone will be affected consequently. There’s no possibility that you can have your touchscreen working without a screen replacement.

The more your phone gets exposed to water, the more it becomes hard to fix. If your phone touchscreen is not working after water damage, relax, you can still get it repaired. Exposing the phone to water creates more harm to it.

Excess water contact with the phone corrodes the phone components. These components will further become harmed by corrosion. When your phone is water-damaged, avoid contact with more water.

One of the things you should do while your phone is on when damaged by water is to switch it off. If your phone is water-damaged, ensure the phone is not on. Other hardware components get damaged while you try to on the phone.

A liquid substance in the impaired part of the screen can create a circuit problem on the phone. The internal part of the phone will also be affected by the short circuit. If your phone is on, hold on to the power button to switch it off.

If your phone is water-damaged, it is time you remove your essential tools from the device. Items like your Sim card, the Memory card should remain ejected from the water-damaged phone. These items can become damaged or accumulate water inside the phone.

You can remove these inserted items by unplugging the slot from the phone side. Expose these parts to dry air if there are water drops on the spots. Also, ensure the removed piece is dry to avoid rust.

If you can remove the battery on your phone, do so without delay. Removing the power source from the phone stops the operation you are not able to control. In some instances where you cannot power off your phone when it is water-damaged, pulling out the battery stops the phone activity.

It is the best option to consult a phone repair service if you have repairs to be made on your phone. Phone repair service offers you an array of repairs that pertains to your water-damaged phone. While you cannot remove your in-built battery, they use advanced tools to do so at their store.

If you have prepared for a screen replacement, how do you get the screen replaced? You can only get your water-damaged touchscreen replaced by a professional technician. Even better, you should consult an experienced repairer to make the replacement durable.

Where do you get a reliable repair and warranty for your phone? If your water-damaged phone is from TECNO, Infinix, or itel brand, you should consult Carlcare Service.

Carlcare Services is the official after-sales service provider for TECNO, Infinix, itel users. We specialize in high-quality and one-stop repair solutions for these brands. Moreso, you get up to a 30-days warranty after repairing your water-damaged phone screen repair at our official center.

But all may not be lost even after your cell phone takes that free-fall into the toilet, or your iPod goes through the washing machine in the back pocket of your favorite jeans. There’s a chance — about 70 percent — that you’ll be able to completely dry the device and put it back to work within hours. In most cases, it won’t be quick, and you’ll have to be willing to make a bit of a mess. But you could save yourself a trip to the electronics store for a replacement.

Although drying procedures for smartphones, music players, cameras and tablet PCs vary in certain ways, for the most part you would follow the same process for any of them upon major contact with water or other liquid:

Remove the battery.As the power source, this is more likely to be damaged by water than the actual device, especially if the item was on when contact was made with the water.

Remove the memory and SIM cards if possible.Because in many cases your data is stored on these instead of the actual computer or phone, you’ll probably want to protect them as much as possible. Fortunately, they’re fairly durable, so you’ll be able to dry them initially with a cloth towel, then let them air dry for a day before reinserting.

Remove any covers and external connectors. This will open up as many gaps, slots and crevices as possible for drying, and help ensure that no moisture is trapped inside the device.

Remove any peripherals and set them aside to air-dry. This is especially true for very small devices as there’s not a lot you can do beyond this. Headphones, in particular, are tiny, but extremely water resistant, even capable of surviving multiple trips through a washing machine and dryer.

Look for signs of water damage. In the case of phones, manufacturers have placed a liquid damage indicator on the inside near where the battery sits. It’s normally a clear or striped pattern; if it’s a solid color (usually red or pink), you may have water damage.

Pat-dry the outside. Use a soft cloth towel to dry off the exterior of the unit. Do not use the towel on any lenses or screens as this can scratch them if dirt or sand particles are in the towel fibers. Instead, use a lens or microfiber cloth for these items.

Do a “dry soak.”Use a product with a high affinity for absorbing moisture, such as uncooked rice or silica gel (the little packets that are found in new electronic devices and shoe boxes after purchase, usually labeled “Do not eat”). Cover the device with the product for at least 12 hours, turning the product over every 1 or 2 hours, or as often as possible. Note that larger items, such as cameras, could take up to a week to dry.

Use “gentle heat.”You can speed up the drying process by putting the device in a location that gets a moderate amount of heat, such as near a television or the dashboard of your car. Do not place the battery on a warm device. Do not use high or direct heat such as from a hair dryer or in the oven as this will damage the unit (especially the LCD screen).

Leave the item in a well-ventilated area to dry.Speed up the process with use of a small fan if desired. Let the item air dry for at least a day or two.

Do the “towel test.”After half a day or more (depending on the drying technique used), place the item on absorbent towels, napkins or other paper. In 4 to 6 hours, check for signs of moisture seeping from the unit. If moisture is evident, repeat the vacuum and dry soak efforts.

To check battery damage, try cleaning the battery connections with a cloth dampened with a light rubbing alcohol solution. Wait several hours for it to completely dry before reinserting the battery and trying again to turn the unit on. Do not turn the unit on if you still smell rubbing alcohol.

You may notice discolored areas on the LCD screen to your camera or smartphone. If you’re lucky, it’s an indicator that there’s still some water in the unit. The device is safe to use at this point, however. If the screen does not return to normal within a couple days of use, you have permanent damage.

If the unit powers up but isn’t acting 100 percent normal, odds are there is still some water inside the unit. The device should not be used. Resume drying activities as noted earlier or perform the following::

A last-ditch effort is to take the unit apart. This is only recommended for basic cell phones, and only if you are 100 percent comfortable with disassembling the device. Note that opening the unit up invalidates any warranty that may exist. Keep careful track of where all the pieces go as you disassemble. Pat-dry each piece with a soft cloth, then reassemble and try again.

It never hurts to prepare for the worst, especially when it comes to protecting your electronics against unexpected moisture. There are several ways to waterproof your technology “just in case:”

Buy a waterproof case or bag. This sounds obvious, yet many people forget that the carrier their phone or laptop came in may not be designed for submersion. Cases tend to come in three categories: standard, rugged and heavy-duty. Keep an eye on the submersion factor, a gauge of how many feet underwater the case will stay waterproof for at least 10 minutes. Standard items tend to survive only a few feet; heavy duty can tolerate 100 feet or more.

Opt for a waterproof product. If you haven’t bought your electronic device yet, carefully consider this option. Cameras, in particular, offer a lot of choice in this department. Expect, however, to pay 10 percent to 20 percent more for the water-resistant of the device.

Use zippered plastic storage bags.This truly low-tech option keeps your device safe from water and other environmental hazards such as sand, dirt or dust while still giving you full use of the keys. Not a great option for larger units such as tablets or laptops as they don’t make bags big enough. The idea is to keep the phone or music player in the bag until you need it, but you can operate the device from within if need be. In this case, forget about using external mics or headphones and prepare for a lot of background noise as the bag shifts while you talk on the phone. Even without the background noise, sound quality through the bag will still be marginal.

Vacuum seal your device.A step up from mere zippered bags are products that offer special-fit, airtight bags designed specifically for iPod, iPhone, iPad, Android, Kindle and similar products. These items leave the headset/headphone jack available for easy access, and are reportedly waterproof in many cases for at least 10 feet under water, but can cost $60 or more, which can seem pricey compared to a $2 plastic bag.

Put on an “invisible shield.” You may have seen these products in kiosks at shopping malls as well as on television: a plastic, custom-fit cover that is glued to your phone, laptop, camera, e-reader or other device. Designed primarily to resist scratching, it does offer some protection against moisture such as raindrops or sweat. But it won’t be as effective if your camera ends up in a water fountain, for example.

Waterproof the device. If you decide after purchase that having a waterproof item is a good thing, you can manually safeguard against moisture with paint-on nano-coating products that claim to be undetectable once applied and offer protection for the life of the device.

The injection of ITO glass — glass CLEANING and drying — PR COAT — PREBREAK — DEVELOP MAIN CURE — ETCHING — STRIP CLEAN — TOP COAT — UV CURE — curing — MANICURE) – cleaning (CLEAN) – applied orientation agent (PI) PRINT – CURING (MAIN CURE), cleaning (CLEAN), silk screen printing (SEAL/SHORT PRINTING) – baking (CUPPING FURNACE), SPRAY packing material (SPACER SPRAY) – para pressing (ASSEMBLY) – CURING (SEAL MAIN CURING)

B. Cleaning and drying of glass: Clean ITO glass with the cleaning agent and deionized water (DI water), wash impurities and oil stains on the ITO surface with physical or chemical methods and then remove and dry the water to ensure the processing quality of the next process.

D.Pre-drying: The glass coated with a photoresist is baked for a period of time at a certain temperature to volatilize the solvent in the photoresist and increase its adhesion to the glass surface.

General TN and the STN product does not require this step, the TOP film coating process is after the photolithography process making SiO2 coating, once again to the etching area and the etching area between the grooved bridge and the electrode covering, this can have the effect of the insulation layer, and can effectively eliminate the display state of the bottom electrode, also help to improve the perspective characteristics and so on, so most of the high-grade product requires TOP coating.

In this process, two conductive glasses are stacked on top of each other, and sealed together, and cured to make a glass box with a specific thickness of clearance. The technology of box-making is one of the key technologies in LCD manufacturing. (Spacing of LIQUID crystal boxes must be strictly controlled)

Evenly distribute the supporting material over the lower glass. A certain size of the liner (usually a few microns) is evenly distributed over the surface of the glass. These materials are used to ensure that the spacing between the glasses is the thickness of the box.

SCRIBING — BREAK OFF — LC INJECTION — END seal — BREAK OFF — sharpen — VISUAL inspection — ELECTRICAL test — secondary cleaning special procedure (POLYGON) — BACK PRINTING — dry ink — POLARIZER ASSEMBLY — Thermal pressure — Inspection appearance test (FQC) — BIT PIN — FINAL test — PACKING — IN STOCK.

STONE provides a full range of 3.5 inches to 15.1 inches of small and medium-size standard quasi TFT LCD module, LCD display, TFT display module, display industry, industrial LCD screen, under the sunlight visually highlight TFT LCD display, industrial custom TFT screen, TFT LCD screen-wide temperature, industrial TFT LCD screen, touch screen industry. The TFT LCD module is very suitable for industrialcontrol equipment, medical instruments, POS system, electronic consumer products, vehicles, and other products.

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

LCD screens have been widely used in current electronic products. LCD screens are used from one computer to a notebook, to a tablet, a cell phone, and a digital camera.

The screen is one of the most direct parts in the daily life, which is the most direct contact with the user. Sometimes, when we look at the screen, we find that there are a few small points on it, that is, the bad point we often say.

Open the computer and display and display the screen display as a pure black picture (or other pure color contrast with the bad color), so that the bright spot can be seen at a glance.

Using a pen cap to squeeze the LCD screen may cause damage to the screen because of the excessive force of the user. If the strength is not true, we can also use a safer hot towel heating method to repair the bright spots.

Soak the towel in hot water. If you can, heat the water bowl with fire until it has bubbles at the bottom, pull the towel out, and put on the heat insulation gloves to dry it.

The hot towels in the plastic bag are placed on the screen with bright spots, so as to ensure that the heat is concentr-ated in the bright spot, hot compress for about 10 minutes, so that the liquid crystal inside the display screen is heat-ed to flow, so that the bright spot will disappear.

Relatively speaking, the safest and most convenient way to repair the bright spot is to use software. From this kind of software operation principle, it uses three colors, red, green and blue with high frequency random alternating switc-h, to stimulate the bright spot until it disappears, and has no effect on the display screen. Here we use Undead pixel software as an example.

On the right side of the main interface of the software is the repair function area. Before setting up, we need to set the monitor to the best resolution, and turn off the screensaver program of Windows.

If there are many bright spots, you can set the number of flicker points in the "Flash windows" option first, then ther-e will be a number of flicker points on the screen, drag them to the spot with the mouse, and click right to set their color.

The running time needs more than 20 minutes, and most cases need 12~24 hours to take effect. This method can re-pair most of the highlights, and also repair the highlights of LCD TV, laptop LCD screen and so on.

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

hi, my phone got into water. i had it dried on hair dryer, rice and silica gel for several days. when i try to turn it on, it vibrates but the screen is black. if i charge it, the only thing that shows is the percentage but remains unresponsive. which part of the screen should i change? thank you

Sir, Last evening Im using FB app and suddenly within a minute my phone screen turns black and everything inside working but black screen remains the same. From last 1.5 years, I didn’t let my mobile fall from hand. Need your assist and advice.

I have a Nokia 6.1 (TA-1045). It’s screen started to come off due to swollen a battery. I followed YouTube videos to use a hair dryer to carefully remove the screen and fix the battery issue. When I reinstalled the screen the lights on the side come on but the screen is black with a small gray area on the left bottom side of the display. Phone turns on and receives calls and appears to be working properly but does not show anything on the screen. I don’t know if I too much heat while trying to remove the screen.

Could it be a problem with the screen, flat cable or main board? Is there anything I could do to test if the LCD has gone bad or entire screen with digitizer has to be replaced?

Thank you. The battery issue is resolved but my Nokia 6.1 display is not working. It has a black screen with a small gray area. I replaced the display with a new one but I still have a black screen (no gray area). My phone turns on and appears to work fine other than no display. The touch screen is also working. Can this be a problem with the main board of the phone or a loose connection?

sir, my phone Vivo y71 have problem, the display turn to be like red, pink, white, blue, green, and etc screen. i can hear the notification sound, what is the problem? the display is new and it work fine until 3 day later it turn to have the problem.

Sir I have a samsung j7 2016 phone it fell down from me display is cracked but I don’t know if the phone is really working because I heard vibration sound and everything except display as it showed lines and black screen sir please tell my smartphone is working or not

My redmi note 7 phone was immersed in water I took out immediately tried to switch it off it did not got off but after few sec display is gone and screen is black I hv dried it completely I am able to recive phone through ear phone .is it display problem or motherboard issue as local shopkeeper said it’s a motherboard issue

When i increases my phone brightness above 20 then display shows black screen with dim backlight and when i decreases phone brightness below 20 then its works correctly. Sometimes its works on full brightness when charger is plugged in and battery is fully charged only at 100.

I have already hard rest my phone and also downloaded firmware again in my oppo a57 but problem persists. When i power on or reboot my phone its does not show OPPO logo on screen because at that time screen works at full brightness and after certain loading when brightness comes to default setting its start displaying.

Hello Santosh, I was using my phone and charging my xiaomi 9T when all of a sudden the screen died! I can still hear the sound of charging and my daily alarm. Touch screen seem fine also when i try to swap away the alarm. No display on screen despite multiple restart/reboot. What could possibly be wrong with the phone?

Did the Phone Fall anytime? There could be 2 Reasons: 1) The connector of the Display is Lose in the Main PCB of the Phone. Remember that the Display and Touchscreen and two different things. The Touchscreen has different Connector to the Main Board. (2) The Display has gone Faulty and needs Replacement.

hello sir, my vivo y66 phone screen has cracked and display has gone complete black, can still hear message and call notifications and if someone calls , I am still been able to pickup calls by just swiping down but nothing is visible.

My mobile,.J8, slipped down, since then display is black. But if someone calls it is.ringing but unable to see anything on the screen. When I approach samsung authorised centre they claimed faulty mother board. Totally confused, if it is board related supposed not to receive any calls.. Isn’t it.

hello sir, thanks for helping with our queries i have a problem with my display of vivo Y95 mobile phone it is an Lcd display but sir the display is working but its pixels is being reduced i mean it is working but the display appears to be a older picture tube display with lesser pixels i did not drop the phone too it changed this way from the day i slept outdoor last night and their is some water collected on the display in morning due to fog.

Sir i have Samsung galaxy j2.it always sounds like if the battery has turned low.and sounds when it is kept on charge but the screen is full black.and the touch screen doesn’t work.the power and volume button work only when the phone is kept on charge.

Sir my phone is on but the display is not showing and sometimes I watch video and playing games and suddenly turning off but the sound can still hear and after few seconds it will turn on again and sometimes when I switch on my phone the display won’t show but the phone is on , and I have two blue lines in screen, but I don’t have any idea how to fix it all, but sir can you give me reason what is the reason in all of this

Your Touchscreen is OK. The Display is Gone Faulty. Replace with Combo Set. Also Install a Protective Gorilla Glass of the Duplicate Combo for Safety as they are very delicate.

Sir,mera phone Lenovo K8note hai,screen pahle aadhi hokar,linings aati thi,phir Black Hokar bandh ho rahi thi, maine combo naya lagvay ,par problem solve nahi hua,ab mujhe Kya solution de sakte hai,Kya karna chahiye .

sir i have spice phone suddely screen of my phone start blinking and than switched off when i tried nto switch on my phone its working but display of my phone is blank?

I have moto x play. Purchased two years back. Phone’s display went blank but touch works fine. display is totally black. i dont know whether it is display(lcd) problem or backlight( battery or motherboard) problem? awaiting for your reply. thank you in advance.

if you can see everything very clearly on the Display and can feet the Crack on the Touchscreen then only the Touchscreen is Broken. You can also use an App called Mobile Doctor Plus. Check the Video Here: https://youtu.be/wu1PwXKJWSs

when i switched off and turned back again, the whole screen got divided in two parts Motorola logo appears both in upper nd lower half plus as boot up progresses the boot up screen shows images with slow fps(in both half) like missing some images in between, at password screen the top half screen is blank and whole display is contricted in lower half, touch is working fine, like where it should normally work even in the blank part. ..

sir, i m using moto e2 second generation phone. it was working well. suddenly, display went blank but touch works fine. display is totally black. i dont know whether it is display(lcd) problem or backlight( battery or motherboard) problem? i m ready to replace the display. but i m afraid even after replacing the display, what if it is still blank due to some than problem rather than display itself, like battery or motherboard. kindly evaluate and say whether i can order a new display for my phone or not. thank you in advance. awaiting for your reply.

Sir I bought a mobile phone (brand new). After a week or more it gave me a problem that it automatically restarts. I gave it to its authorised customer care centre for repairing. They refreshed its software but now it is giving me another problem which is that whenever I use it on full brightness its screen starts flickering but after a close observation I observed that it only flickers at grey colour family area i.e where ever there is grey colour on my lcd it flickers at maximum brightness. Is it a lcd issue or a board issue or a software issue and also all the rest colour work perfrctly and this issue is only innmax brightness. Plz guide me as soon as possible

Sir I bought a mobile phone (brand new). After a week or more it gave me a problem that it automatically restarts. I gave it to its authorised customer care centre for repairing. They refreshed its software but now it is giving me another problem which is that whenever I use it on full brightness its screen starts flickering but after a close observation I observed that it only flickers at grey colour family area i.e where ever there is grey colour on my lcd it flickers at maximum brightness. Is it a lcd issue or a board issue or a software issu??? Plz guide me as soon as possible

Sir my phone is fell in water then I put it 3 hours in rice then use 7/8 hours without any problem but next day when I wake display colors are faded …..Please tell me the problem.

My zenfone max lcd not working I have checked new lcd but not working. phone starts completely and when I start my phone then lcd flat belt get very hot please give me solution

Sir my smartphone fall in water for few second and I switch off it immediately but it vibrating for 2 minute, after that I put my phone in sunlight for 4-5 hours.

My HTC desire828 screen appears smtimes with white Nd black shades especially while switching on d phone.whether it’s a display problem or bcz of Nt updating software

Sir actually my phone starts recognising unnecessary touch wen exposed to light and wen brightness is increased…Things happen itself….How to overcome dis….I’m using Moto g4 plus….

My htc desire 828’s screen’s display is half black and half good working.As i use it for 5-10 minutes it starts to work properly but when screen locked n opened again again same problem.please help..

My Redmi Note has fallen on ground, on its full brightness it’s shows very dim display, rest all functions are working good, screen is visible but very less, touch is OK, pls solve the problem

Hello,my moto e screen is half visible while half screen has black and red stries over it.what can i do to it. is there any solution or i have to take it to authourised service center?

Sir my micromax unite 2 A106 model while pressing power button to check sms or calls display goes blank only only touch buttons blinks to see display again i have to remove battery and insert it and ON power butpleasedaily it happen for 3-4 times please help me

Display is not appearing in my mobile Nokia Lumia 610. When I was dialling a number, screen blinked and fluctuated and disappeared and now there is no display at all.

There are two ways to properly perform this task on any OEM adhered lcd assembly. One way is very costly to setup and the other is not but it is slightly more time consuming.

I will not go into the expensive setup we have here that would cost you thousands of dollars, because on your level it is unrealistic. The good news is that you can separate the layers YOURSELF using nothing more complex than a simple hair dryer and some odd and end trinkets.

Following these steps you will have a reconditioned lcd assembly in under 30 minutes using common household items and a few you will need to hit the harware store to obtain.

While wearing leather gloves, wrap the ends of the wire around your index fingers on each hand enough times to give you a very sturdy grip. Keeping the assembly face down on the griddle apply slight pressure on the lcd with your thumbs while you gently work the wire between the glass and the digitizer/polarizer layers. You only want to get the wire in a few millimeters, just enough to get your playing card in behind it.

Take off the gloves, leave the wire in the glass and slide a playing card in right behind the wire. Make sure the card spans the ENTIRE width of the lcd and protrudes from both edges, left and right.

Have someone hold the hair dryer for you and point it at the glass, to the very bottom edge of the card. Moving together, slowly but steadily work the card down between the layers, separating the glue. Do not bend the card towards the lcd at this point or you may shatter it. Continue moving the card through as your friend follows the edge of the card down with the hair dryer. You will more than likely need to throw away the card and use another 3-4 times to get all the way through as the card will get mangled and lose its edge, becoming ineffective.

You will notice that your lcd is free of all the glass but is also covered in gooey gum. Much of this can be removed by simply grabbing some tightly and peeling it back with your fingers. If you run into any stubborn gum use the safe scrap plastic razors to remove it. Do not use any solvents to remove the gum unless you are proficient with a soldering iron and do not mind re applying the back light layer on the rear of the lcd.

Place your lcd face up in the LOCA mold. Apply a line of LOCA straight down the middle of the lcd from top to bottom. Excess will not hurt but it is messy, however you are better off using too much adhesive than not enough. Once the LOCA is applied, place ONLY the bottom edge of the glass into the mold but hold the top edge up and do not allow the glass to contact the glue yet. VERY SLOWLY begin to lower the top edge down to the lcd. ONLY move as fast as it takes for the glue to make it all the way to the left and right edges, it will like watching a horizon of glue rise to the top and outward to the sides.

Congratulation, you have rebuilt your lcd assembly. In our shop we often do have to perform this task in a similar fashion as the machines we use do not work when the glass is completely shattered, so this advice is based on my personal experience from owning one of only 3 facilities in the United States that is capable of this on a large scale.

Keep in mind that iPhone screens are so inexpensive comparatively speaking that there are probably many things you could be doing with your time other than attempting this. But if you are like me, and it always bothers you when someone tells you something cant be done, then enjoy. Remember, patience is the key. Frustration, shaky hands, being irritated or distracted often leads to a shattered lcd. If you are having trouble put it down and take a break for 5 minutes.

quick edit: I forgot about the Alcohol! using a q-tip NOT dripping in isopropyl alcohol gently clean excess glue form underneath your new glass. Unlike solvents, this only removes uncured LOCA and will not effect the bond you created. Be careful to use as little as possible or you may need to solder a new back light layer on the lcd, as even alcohol is not pure and contains some water which will stain the otherwise immaculate back light layer, giving you that bad whiteout splotchy look.

It’s being good to read this meaningful article about water damage and screen repairs it’s very costly to repair and you need to choose a good and trusted Repair center for this kind of Cell phone Repair.

Just an FYI. I had a charging case on and I believe that fried the phone before I was able to try to save it after my husband walked into the pool with it. Submersion was less than 30 seconds for the iPhone 6. I believe we couldn’t bring it back due to it basically charging in the pool. I’ve been saving up the silica gel packets since then and have the same bag of rice mixed with the packets ready for the next liquid dunk. I have an iPhone X, but my husband has one that’s not water resistant and we have an iPhone 6 as a backup. I agree that you should try this. Even if there’s a 50% failure rate it’s worth a shot if you don’t have the money or equipment or ability to take your own iPhone apart. Especially since you have like a 99% breakage rate if you try to take it apart without actually knowing what you’re doing. Good luck everyone!

I put my phone in a combination of rice, instant oatmeal, and silica gel after it was submerged in water for less than five seconds. It took three days to completely dry out, I check it every 24 hrs and the first two times it had lines going through it and was problematic, after the third time there was no errors and now have a working phone. It’s not an iphone like this article supports but a moto g6, but I think the sam

I dropped my I phone 6 plus in the toilet this morning, totally submerged, and took out right away. After taking the case off and dried everything, the phone seemed normal. I still listened to my audio book and played the phone a bit. However, a few hours later, the phone did not respond completely, no matter what button I pressed (too bad I did not know no button should be pressed and the power should be off). I am still in the office now, a few hours before going home for a rice dry solution. I wonder if it is too late to take any action to get my phone back to life? Anybody has any advice, please?

I really like your tip about removing any case or enclosure right away since they can trap in moisture. My sister recently dropped her Iphone in water and found it working again with the rice trick. I will definitely keep these tips in mind if I ever drop my phone in water.

After I dropped my phone into my glass of water and fished it out, the phone worked fine for a few seconds and then out of nowhere it started to constantly vibrate, going on and off at random intervals. Also the power button didn’t work. After turning it off, it went into a sequence where it went off and on, where when it was on it would vibrate again. Will this (it going on and off) have ruined my chances? Is this a common problem? Plz help!

i dropped my iphone 5s in water , it was still working from the time i took it out from the water. The indicator in the sim slot is turned red.but my phone works completely fine.

ok so today i was playing in the creek that’s next to my house and the ice cracked and I fell in(Yes, I know, how stupid of me). It was probably 0 – -3 degrees(F) and when I put my jacket and snow pants away, I noticed that I had my Iphone 6 in my pocket of my snow pants. I immediately put it in rice. After 15 minutes, I was so impatient that I got on it. It was fine at first, but then when I turned up the volume of my phone it was a little slow and laggy. Then, the volume sign wouldn’t go away. There were two lines, one on the top and one on the bottom. It was little at first, then gradually they got bigger and bigger. I sighed, thinking that I will have two lines on my phone for the rest of my phone’s life, then put it back in the rice. A hour later, I noticed that it was turned on to siri. I tried to turn it back off, and it did. about 30 minutes later, i saw the restart screen pop up and turn back off. The two lines was now a big column on the left side of the phone. on the bottom corner, there was a small blue puddle shape thing also. I kept it in rice for another two hours and the restart screen kept turning on and off. I tried to turn it off, after reading this, but it wouldn’t work. Finally after 30 seconds of holding the home button and the off button, it turned off, but then it wouldn’t turn back on. I looked for the water damage thing, and I don’t even know if I have that or not. So, I’m just going to leave my Iphone in the rice and hope for the best.

If you have a wet iPhone that was submerged in water, to avoid liquid damage you need the iPhone to dry completely with no power or usage. The iPhone is not dry after only 30 minutes. You need to leave it for 72 hours or longer. Don’t be impatient, or your iPhone will likely not recover. Water is conductive, it can destroy circuitry and if you used it when wet it could cause liquid damage from the water. It needs to dry completely as the article describes.

Help! So I dropped my phone into a cup of water while I was getting out of my truck. I instantly dried it off and ran inside and put in a big bag or rice-a-roni. This is the only rice I had in my house. The iPhone 5s turned off on its own. Only the top part fell into the water for a split second, but that happens to be the only part of my phone where the screen is cracked!! Now, Its been almost 24 hours sitting in rice and I just threw a couple silica gel caps in with the rice once I read this thread. Also, like the idiot I am, I left the case on the phone when I threw it in with the rice. 20 hours later, I read this, took the case off, and threw the phone back in with the rice and silica gel caps.

So I am wondering, is it ridiculous to think ricearoni will work? Will it make a difference if I go buy real rice and switch it over? Also is there any chance it will make it when the screen is cracked and water got into the cracked screen? No water got into the bottom of the iPhone where the charger port and headphone plug in is located. I will give it at least another day before I mess with it.

My iPhone fell inside water did all what was said above. I changed the screen but it doesn’t work. My phone is coming on but the screen isn’t working even with a changed one. What do I do? Is it salvable

It works!!! I dropped my iphone 6plus in water and immediately retrieved it, dried it off and threw it in a bag of rice for 48 hours. It works perfectly!!! BTW – I just confirmed that Basmatti rice works too (thats all I had on hand at the time). Thanks for the clear directions!!! You saved me!!

It does not need to be airtight, but placing the iPhone into a bag of silica gel or rice for several days is the recommended action for an iPhone that has been submerged in water. If it has been four days and the iPhone is not turning on when plugged in, it is likely too late.

Checked it to day almost recovered only 3 spots will leave it for few hours but really I think mine went out cause it’s only screen all other parts cleaned and dried before but my problem that I couldn’t reach screen also my wife asking me to get rid of headache and buy new lcd and replace it

Hey so i was in the pool bout 3 feet of water lets perhaps say 30 mins it had a lifeproof case on but water still got inside i didnt notice the water got inside until i tried to turn on my phone. it was soaking wet. i got home bout 45 mins later and put it in some rice for bout 2 days im gonna wait 1 more day to make sure it works. its an iphone 5s. do you guys think my phone will work. please reply

Mrs E, you can skip the rice if you don’t have much, but another solution would be to rest the iPhone next to a fan blowing dry air or something similar for a few days. The key is that the internal components must completely dry out, that is where the damage can occur, and that’s why it takes so long to dry out. Good luck!

So I was rushing to do laundry and forgot I had left my phone on the bed and pile all my shirts on top and throw it in the washer, after about 5 mins no more than 10 I realize I had put it in the wash. I quickly stop and took it out and followed your instruction. I was wondering where should I place the bag of rice so it can absorb all the water? Like in a warm room or? Please email me asap! I’m so angry at my self and depressed :( because I’ve only had this iPhone 6 for 2 months going on 3. Please email me as soon as you can. Thank you in advance!

So, I want people to know my story. On a very rainy day, my truck spun out and rolled. Everything was ok but my iphone, I couldnt find it anywhere. The next day I went back to the scene and found it in running water. It was on when i rolled the truck, and off when i found it in water. So, i figured it was dead. I went home, put it in rice for 2 full days. Probably closer to 60 hours. Then i went to the hardware store where I found a kit that open ups iphones. I opened it up, stuck that in rice for a day, then after a day went by, I blew it out with air. I plugged it into the wall and all is well. There are 2 things wrong. The screen is a bit faded, and the battery states that it is at 3% constantly, yet it does charge to a full charge. Iphones are amazing!

I dropped my phone in the toilet yesterday. It wasn’t fully submerged or even in there for more than three seconds but the screen is now wonking out. It took me several tries to turn it off. Unfortunately I was at musical practice so it wasn’t until six hours later that I got home to put it in rice. It’s an iPhone 5s. It has only been in for about ten hours. Do you think it will survive or is it already corroded?

If you turned it off immediately and let it dry out for 48 hours to 72 hours in a warm dry place (over a air fan, in rice, silica gel bag, etc) then it has a good chance at being fine.

The iPhone is impressively resilient if you dry it out and turn it off quickly. I have an iPhone 5 that took a big swim a few years ago and it is still working fine to this day.

i left my iphone 6 in the washer for more than 20 min, i then took it out and dry it with paper towel. just leave it in the bag full of rice… hopefully it will work after 48 hours. I am so worry coz 25 min was such a big amount of time.

I dried it off straight away, and tried to see if it would work, but the screen was non responsive – which meant I couldn’t turn it off. I chucked it in the bag of rice and then looked up what to do. I ended up trying a combination of things – 5 mins totally covered in rice in a very low oven, a hairdryer held about 30cms from the bottom ports, even the back side of the hairdryer, and back in the rice. After 5hrs in the rice I was able to turn it off. Now, 36 hrs later it seems to be working without issue. The phone is charging, the speakers work,& screen is responsive.

Some days ago, my iPhone 5 fell into the toilet (yep, back pocket, what else. Still don´t know why I even put my iPhone there). Luckily, I knew what to do because the same thing has happened to a friend of mine some months ago. I tried to dry it as good as possible, shut it off immediately and then put it in rice. For three whole days.

That´s all I did, and when I turned it on today, everything worked perfectly. Camera, apps, screen, buttons, battery, everything. I´m so relieved and happy.

Dropped my 6 week old iPhone 5s (on new contract) deep into a toilet full of wee. Got it out quickly, but inadvertently switched it on and off several times trying to get the silicone/hard case combo off. Home screen booted up and melted before my eyes into a mess of moving lines and giant pixels. Couldn’t power it down properly as screen wasn’t working. Well that’s totally f****d I thought…why do I persist in stuffing my phone in my back pocket etc…? Still, ever the optimist, I dried it thoroughly and chucked it in a ziplock bag full of rice. Into the airing cupboard it went overnight. Took it out the following morning and took the sim card out (it was soaking so I should’ve done that straight away really, but forgot in the general panic). After another 12 hours languishing in rice, I took it out and gave it a blow dry into all its orifices with the dryer on cool setting. Then I took the phone and rice out of the bag, put it in a bowl, and left it open in front a dehumidifier on full blast for another 48 hrs. 72 hours later it is working fine – speakers, fingerprint sensor, camera, charging fine, receiving and making calls/texts, Siri still talking to me despite me dunking her in wee! I know (from comments here) that it may be corroding away slowly inside, but then again, it may not (and at least I can get my stuff off it). Cheers to everyone on the forum for advice, and good luck with your own resuscitation attempts… :-)

I used Thai sticky rice and it worked for me, my toddler grabbed my phone and dunked it in the sink she was bathing in. I got a blue screen and a white screen then it went dead and wouldn’t turn on. An overnight sit an a large bowl of rice and all was good. It worked for me.

I dropped my Iphone 6s in the toilet for a few seconds no more than 3 seconds in the toilet. I left my phone on but wiped it down. After reading another website on my soaked iphone and a few text, s I shut down my phone and took out the sim and tried to use a hair dyer on low. I dried all ports and sim for a good 5-10 minutes and turned it back on and it seemed fine other than touch screen problems so I left it on not thinking much. After an hour of it being on i noticed more touch screen problems while using various apps for half an our i turned it off again and on again and notice a watermark no big but noticable. I now have it off and tried to blow dry it again. I don’t have any more rice at home but don’t know what to do. Currently it is off and it is on its side so liquid can drain out on the sim card side. I am leaving it off for the night but will need it for work tomorrow. What should I do??

I dropped my iPhone 5c in the toilet two days ago. I got it out very quickly. It was turned on when it fell in. When I pulled it out, I immediately pulled the headphone jack out and yanked off the case as quickly as I could. I also removed the plastic screen protector. I dried every surface of the phone. Unfortunately, before I went on line (on my computer) to see what I needed to do, I pushed a few buttons. There were streaks across the screen and some of the operations didn’t respond, though the touch screen was working. Then I read I shouldn’t push buttons, but I should turn it completely off, since you don’t want it receiving calls, while it’s recovering.

Tonight I turned the iPhone 5c on. The first thing I saw was the reassuring white apple appear on the screen. After a normal amount of time, the iOS screen came on. Everything appears to be working fine. Will this continue? I don’t know, but it seems very promising.

The one thing I didn’t do was remove the sim card. There are good videos on youtube that show you how. Removing the sim card doesn’t void the warranty. Also, you can see one of the water damage indicators when you remove the sim card from the 5c. I’m thinking about doing that to get an idea whether it shows the damage.

I have dropped my iPhone into water, totally submerging it, used the exact method outlined here to dry it out for 72 hours, and it works fine still to this day.

Is dropped my old iphone 5 into a filled warm bathtub half an hour ago and almost had a heart attack. The phone was off and had a tight fitting case. It spend one millisecond completely submerged in the water then I snatched it out and wrapped it in a towel until it felt dry. I then took off the case and towelled the phone off until it was completely dry. I put on a dry case and switched on my iPhone and… It WORKS like normal (perfectly well) and like it never touched water (and I hope it will keep working like that *touch wood*).

The iPhone needs to dry out, the inside could have water in it in which case it will fail after a few days. Dry the thing out for several days, with it off, not in use, as instructed.

My iPhone 5s dropped in toilet and I was drying in rice silica and even opened my phone to dry nothing worked. After one week I went and got alcohol in pharmacy came home and opened my phone, took battery and all other parts. I decided this because I didn’t have noting to lose because Apple was asking for 300$ plus tax to fixit and my carrier told me I have to pay off my iPhone one year old 232$ plus tax and resign contract to get new phone so there was nothing to lose. So I watched you tube how to clean with alcohol and I did it. After I tried to see if is working nothing still so I took again board and put it in alcohol for few minutes and waited to dry, alcohol dry quickly. Cleaned inside as well with q tips and put it all part together tried again nothing, plugged in computer and restored to factory, tried few times as well and miracles happened my phone finaly restored. First buttery was dying fast even my battery was 100% charged phone was turning off kept for one hour plugged and phone stated working camera volume but was slow. I will give few days to see if it comes to original spread and battery not dying before I change new battery. So do not give to anybody your phone because if the phone is water damaged all carrier will pay you 55$ for your phone now question is why? Because that’s how they fix and resell as refurbished same with apple or private business.

My iPhone 5. I went to Aquatica yesterday and had on my “waterproof case” and had it in my pocket and water got into it, i felt heating from my phone and left it out the water after that but I was 4 hours away from home so couldn’t put it rice right away what does that mean? What can i do? Please help

I dropped my iPhone 6 in water… Dried it off immediately. The phone was now stuck in headphone mode so instead of placing it in a bag of rice I stuck my phone in the air/heat car vent turned the air medium heat full blast for 15 minutes straight to dry out the headphone speaker hole…bam! Worked like a charm.

Welllllll typing to you from my iphone now!! After 72 hours in rice and the vacuum hose trying to suck out the water it lives again! Have patience it will work!

My iPhone took a plop into the bowl last night to my great dispair….although I dried it off and left it to dry overnight I stupidly turned it on the next morning saw it was still messed up turned it off put it in rice tried to turn it on again a few hours later to which it did but then shut itself off ugh ….I then saw someones post about using a vaccumm hose to suck the water out and I know for a fact it works…my camera lens was damp but when I used the vaccumm hose it all went away immediately..I used it all over any possible place that I thought water could have gotten in and put it back in the rice too paranoid to turn it on again right now…ahh I hope tomorrow it will turn on and work I will keep everyone posted..

A bag of silica gel works the best but very few people have a bunch of those packets laying around, thus rice and 24-72 hours is sufficient to dry out most iPhones that have been submerged in water. It doesn’t always work, but I’ve had it work for myself with a few iPhones and a few iPads that have been dunked into water, so far so good!

My brother left his iPh in water for about 10mins. And after about 30 or 40 mins, I dried it with a dryer and put it in a rice bag. I am worried that it took the device about 40mins to b dried. Would it have a problem?

Thanks this article helped me a lot because yesterday my Iphone5 fall-down into toilet..Immediately i took and cleaned it with my handcuff after that its not working properly i tested with a outgoing call i faced mike pblm other person not able to hear my voice when i speaker he able to listen. i switched of some around 2hrs..and i pun some in hand dry machine for some time…then i tested with charging its charged…once again put under hand dry then i switched on mobile i testing by playing a music file its played well immidiately i tested a call..call also fine…but that i faced pblm with center button ….same day night put my mobile in a rice packet entire night almost 9hrs..after that every thing working fine inclusing center button and that water scratch also gone….

Dropped my iphone i the toilet as many did, took it out immediately wiped it with a towel and also used a hair dryer. After a while i even charged it. I have two white stripes over the screen now and the first day it wasnt working well but today apart of the screen it all works altough when i charge it it gets really hot.

I have an iPhone 6 and i dropped it in a chlorine pool! It was in there for about 15 minutes and I put in straight in a bag of rice. Around an hour later I made the mistake of trying to charge it and the Apple sign came up but then it went all fuzzy and showed these weird blue lines. It has been blacked out ever since although I have left it air dry + left it in rice for about 2 days.

I need help !!! I gave my 1 year old neice play a game on my iphone 5s and she dropped ot in a bukket full of water I automatically took the case off and cleaned it but i didnt take the sim card out, i put the iphone in a jar full of rice , what are my chances … I need help ASAP

So I dropped my phone in the bath 2 days ago. Had never done this before so didn’t know what to do and tried it to see if it still worked. Looked up what to do and turned it off and put it in a bag of rice after about 10 mins. It’s been in the rice for 48 hours now and just turned it on a minute ago to see if it worked – it did work perfectly BUT I noticed the screen looks dark and damp with water marks so turned it off again and put it back in the rice.

Do not turn it on until the water has dried. If there is any visible water, absolutely do not turn it on. Let it sit on a blowing fan for 4 days or so, maybe longer, until it has completely dried out, then try to turn on the iPhone. Do not turn on the iPhone before it’s dry, it will damage the iPhone.

My iphone 6 completely submerged into water(10am) two days ago. I took it out as soon as I saw it fall in the water. Took off the case. Dried it with my shirt and used the blow drier on it for hours(don’t let it get too hot/use at a distance on warm). At around (4pm) I put it in a bag of OATMEAL which I read works better. I kept it around warm areas. The next day I blow dried it a bit more but kept it mainly in the oatmeal, took out all the air from the bag. My phone looks perfect. Everything works.

i dropped my iphone in the toilet and then picked it up after wizzing on it :) that was disgusting believe me now i dried it with a cloth(t-shirt) and i made sure that there is no water at at all, i didnt know that i have to switch it off but it worked at first suddenly it became too hot and i cant even touch it so i tried to let it cool down and put it in a bowl of rice hoping that it works again, now it have been one hour and i have 23 more hours to go :"( wish me luck <3

Did you read the article Aisha? It works to save water damage if you follow the instructions. It says that you should turn the iPhone off immediately, dry it off as best as you can, and and let it dry out for at least 72 hours. Do not turn it on until it is completely dry internally.

The internal components must dry, this can take 72 hours easily if not longer, then you can try to turn it on when the inside is dry. The iPhone can not be wet any longer otherwise it will not work.

I have successfully used this exact method to save a wet iPhone, a wet iPad, and a wet Mac. It works if you act quick, but don’t be impatient. The iPhone must dry out!

my iphone dropped in water and after 8 to 9 hours it was not opening and then again i put my iphone in a sealed bag of uncooked rice and i have to ask that how can i know its open or off.45 hours have been passed i can open the sealed bag or not plz reply must i’ll be wait for u thanks

This is how you can potentially save a wet iPhone from water damage, it’s detailed and explanatory article, very good source of info I would start here and read the page: https://osxdaily.com/2013/04/11/dropped-iphone-into-water-save-damage/

My friends poured a bucket of water on me and I had my iPhone 5s in my pocket. It got soaked and my friend said,”get the rice!” We got some rice and put it in. That was two days ago and I’ve left it in rice ever since then, but I can still see water in my screen. It died and I don’t know if it is fixed yet. Is it safe to charge since it might still have water in it? I don’t want it to explode or something like that. Please help!

Hello Girish Today, here to inform you exactly what to do when your iPhone is wet, and how to recover the moisture contacted iPhone by drying it out, and to prevent the iPhone from receiving water damage to the iPhone as best as you can. It is not a science but it has worked for myself and many other users who have dropped their iPhone into water.

My iPhone 4 fell out of my front pocket and into the sink filled with water this morning.. I Pulled it out straight away and it was turned on still and I quickly dried it with a towel and then hair dryed it for a while haha.

after about half an hour my friend text me to put it into rice immadietly, so I put it in rice but facing upwards. My phone is also REALLY cracked so the water probably got in easily! it is turning on but i should leave it in there as long as possible!

I put my phone on the table in my sweatshirt at school yesterday and then someone accidentally knocked it over with a glass of water. It wasn’t completely submerged in water, but it was still wet, and it took a while until I knew because they just hung it up without telling me (about twenty minutes until I found out). When I found it, the flashlight was partially on and flickering slightly (I tried turning it off, but even when it’s off, it still has a bit of a light). I powered it off completely as soon as I found I couldn’t turn off the flashlight, and dried it as much as possible. Even though it wasn’t completely in water, it took a bit of time so I’m thinking it might as well have been. When I look at the back, I can see some water fogged up in the camera. I haven’t seen anyone else with the flashlight problem yet. Is the water damage really bad? We just put it in rice just today, and the flashlight is still partially on (it’s dimmer than yesterday and it’s steady now, but I have no idea whether that’s a good sign or not.) I have an iPhone 4, and I looked at the chart for the water damage sensors. Do the turn red when activated? I looked at my phone and I didn’t see anything like that, but I’m not entirely sure what it’s supposed to be like. The switch on the side (silver, left side under the sound buttons) though has a red thing. I didn’t charge it because I heard that was a really, really bad idea and anyway, it was above 80% last I checked. Will my phone be okay?

All of the ideas for drying out these gizmos without opening them up are relying on (slow, patient) evaporation. And air circulation is usually the key to evaporation.

With this in mind, when my new (two weeks old!) iPod Touch fell into a pool of water, I left it lying outside in the sun, face down — lots of warm sun and good air movement. I also have a powerful vent hood in my kitchen so, when the sun went away that evening, I propped the iPod up directly under the hood and ran it on high for an hour or so. Then I put it into a bag of rice for the night (figuring, if nothing else, it was probably the driest place in the house). I repeated this regime the next day as well. As of now, I have a fully functioning iPod — let’s hope it stays that way.

I dropped my iphone 5s in the tub a couple days ago and i immediately took it out and dried it off with i towel. I shut it off then turned it back on and i saw dark blue all along the sides of my phone. I put it in a bucket of rice and let it sit overnight. I turned it on and it would only show the apple screen and it would change colors then shut off. I left it in rice again that night.

Anyways, I water boarded my i-phone 5s 3 months ago now and it’s still working just fine. If that changes I’ll take it to an ‘Expert’ but right now, I’d still recommend giving it a go with the bag of rice.

I was dancing down a driveway (stupid I know) and my iPod went flying out of my pocket into a puddle of slush. (super watery snow) right now my iPod is sitting in a bag of rice. Right after I dropped it I turned it on and tried to see if the sound would work, it didn’t. I went inside and dried it with a hair-dryer, but my iPod got very hot. Now I know I shouldn’t have done almost any of that, so I shut it off all the way and now its in a bag with rice. Hopefully I am not punished for my stupidity! I can only hope it works when I try it in 40 hours…

Just retrieved iPhone 6 from washing machine. It was only in a few minutes. Have followed your instructions to the letter, however am not able to turn the phone off. The touchscreen is unresponsive and holding down the power button for a long time does not cut power. Any suggestions. Thanks for this instructive article. At least it gives me some encouragement.

I was never able to turn the power off since the touchpad was unresponsive. After about 60 hours in the rice the touchpad started to respond and the phone worked perfect except for vertical dark streaks on each side of screen. I put the phone in the rice for another 24 hours and the phone works perfect and the streaks are gone. Count this as another succe