dry water between lcd touch screen pricelist

Have a water damaged iPhone? Dropped it in the tub, submerged it in a pool or spilled coffee, soda or another liquid on your device? Here’s a comparison of three iPhone water damage repair options and what they cost, plus a breakdown of whether you should fix it or sell it.

NOTE: Apple’s standard one-year AppleCarewarrantydoes not cover water or other liquid damage, but AppleCare+ does. Learn more below under “File an insurance claim.”

Note that the do-it-yourself option assumes you will dry your phone; if you need to replace internal parts, the total cost depends on component pricing. See below under “DIY repair” for more details.

In addition, the large variance in professional repair service pricing is due to the nature of this repair: if the company only needs to dry your iPhone, it will be much cheaper than if they need to repair or replace internal components. Pricing also depends on your iPhone model and which repair company you choose. Learn more below under “professional repair.”Rather buy a new iPhone instead? Save with these iPhone deals

iPhones are not waterproof, but Apple has made iPhones water resistant since the iPhone 7, released in 2016. Here are water resistance ratings for each model:IP RatingMaximum Depth/TimeiPhone Models

Apple states that water resistance is “not a permanent condition” and can decrease with normal wear. That means it’s possible to get water damage even if you have an iPhone with IP67 or IP68 water resistance.

Water can also get into your iPhone if it was damaged or previously repaired, especially if the water-resistant seal is broken. Learn more on Apple’s splash, water and dust resistance page.Want your iPhone to last longer? Here’s how to protect your iPhone

On iPhone XS and newer models, a warning message displays on the screen if liquid gets into your Lightning port (USB charging port) and you try to plug in your charger or an accessory.

However, that doesn’t tell you whether water has infiltrated internal components. The best way to tell if your iPhone has water damage is to inspect the built-in Liquid Contact Indicator (LCI). It’s a white or silver strip that turns red when exposed to water.

If you have an iPhone SE (first generation) or older model, the LCI is located in the headphone jack or charging port. Learn more about where to find the water damage indicator on your iPhone on Apple’s website.

After waiting at least 48 hours, try to power on your phone. If it turns on, make an immediate backup (in case water is still inside and causes future damage), then resume regular use

If only the charging port is affected (indicated by an on-screen warning), you should:Power off your iPhone and unplug the Lightning cable and any accessories

Liquids can get into your speakers and muffle the sound, even if they don’t damage your iPhone. The solution is to let your iPhone dry until the audio returns to normal, but some tricks can speed the process.

First, gently tap your iPhone against your hand to remove excess water. Then, use a water eject shortcut, app or website to get water out of your speakers.

Alternatively, you can download an app that emits a range of frequencies to help expel water from your speakers. With your speaker facing downward, try selecting different frequencies to remove the water. These apps aren’t made for water ejection, but they’re worth a try:

If you don’t want to download a shortcut or install an app, you can visit any of the following websites from your iPhone browser. The first two automatically run through a range of frequencies to vibrate your speakers and expel water; the last allows you to do it manually.

If drying your iPhone doesn’t solve the problem, you can consider opening it to dry, repair and/or replace internal components. The exact process and cost depend on which parts are damaged and is beyond the scope of this guide, but here’s a video with step-by-step guidance for advanced water damage repair on an iPhone X:

If you’re unable to repair your own iPhone, a professional repair service can help. Local shops are likely the quickest options, but online mail-in repair services are convenient if no local repair stores handle water damage.

Some companies offer iPhone drying services. TekDry, for example, claims to remove moisture from iPhones in as little as 30 minutes. The service is available via mail-in and at Staples stores. TekDry costs $70 and offers a risk-free guarantee: if they can’t fix your iPhone, you pay nothing.

You can expect to pay between $45 and $599 for professional water damage repair. The wide range is due to multiple factors:Extent of damage: It’s much cheaper if your iPhone simply needs to be dried, but if internal components are damaged, you’ll need to pay for replacement components and their installation

iPhone model: Some models are cheaper to repair than others. For example, average water damage repair costs at UBreakIFix start at $79 for an iPhone 6, but range between $199 and $329 for an iPhone 11

Some companies charge the same no matter which model you have. For example, iMaster Repair charges $45 to remove water from your iPhone. Keep in mind that water removal doesn’t necessarily mean your iPhone will be functional. If internal components are damaged, they’ll need replaced, and that will cost more.

Always make sure you know what you’re paying for before taking it to a repair company. Some offer free water damage diagnostics, while others charge for diagnostics and then charge an additional fee based on what needs to be repaired.

You can file a claim with your insurance company if you have iPhone insurance. They might offer a choice between in-store, on-location or mail-in repair. Note that some insurance companies will overnight a refurbished replacement iPhone rather than repair and return yours.

Expect to pay a deductible ranging between $99 and $250, depending on your model and insurance company. Here are some example iPhone water damage repair deductibles:InsureriPhone Water Damage Repair Deductible

Should you fix your iPhone or sell it with water damage? You can base your decision on how much your iPhone is worth broken versus repaired, especially if you plan to upgrade soon.

Of course, your decision depends not only on the value but also on how long you plan to keep your iPhone. If you intend to hold on to it for a few years, it’s cheaper to repair water damage than buy a new iPhone. However, if you plan to upgrade soon and trade it in, it’s worth comparing your options to see if you’ll get more value after repairing or selling it broken.

Finally, there’s always the possibility that your iPhone cannot be repaired after water damage. In that unfortunate event, you can still sell it broken and get some cash to put toward a new iPhone.

Maybe the apartment above yours has sprung a water leak. Or perhaps your teen tripped in the living room, spilling soda all over the TV. Either way, now your TV is wet, and it’s not working like it used to. Learn what to do if your TV got wet and how to know when it’s time to shop for a new one.

A small spill or minimal condensation on your TV may not cause irreparable damage as long as the water doesn’t reach the primary power sources. But even just a small amount of water on the circuit board can lead to permanent TV damage and short-circuiting.

Start by unplugging the TV. Then, wipe up the water with a non-abrasive cloth to avoid scratching your screen. Give your TV plenty of time to dry, and ensure that every drop of water has been wiped up so that it doesn’t soak into your television.

If your TV has sustained heavy water damage, it’s likely beyond repair, and you may need to replace or upgrade your television. However, any attempted repairs should be done by a professional.

Allow your TV to fully dry and have it inspected by a certified technician. A professional will be better equipped when determining the extent of the damage. Taking your television apart yourself could put you at risk of serious injury and may void the warranty. It’s always best to check your TV manufacturer’s warranty information before having any repair work done.

If you have a water-damaged TV screen, you’ll likely know pretty quickly once you’ve turned it on. A water-damaged LCD screen is usually not repairable, as water can settle between the layers of the liquid crystal display and can be very difficult to dry. In this situation, consider replacing your water-damaged TV with a new one.

Your TV’s remote control may be a little more forgiving of water damage than your television. If you’ve spilled water on your remote, quickly remove the battery cover and batteries. Then, use a soft, non-abrasive cloth to wipe all the water off the remote. If the water spill was minimal and doesn’t appear to have gotten inside, wiping it and setting it out to dry should be enough.

If there was a big spill or the remote was submerged in water, it likely has internal water damage, making it less likely to continue working. Remove the battery cover and batteries, wipe the remote down, and place the remote in a zip-top bag filled with dry rice. Let the remote sit for 1-2 days before removing.

Replacing a water-damaged TV remote may not be as big of a deal with tons of universal and replacement remotes available. But a water-damaged TV is a different story!

I bought an iPhone 3G for $5 from a friend. It was known to have water damage -- she dropped it in a puddle. Anyway, it seems to charge fine and is recognized by iTunes, although I"m not yet sure how long the charge will keep. If I get this working, I"ll probably attempt jailbreaking it to play with on T-Mobile.

But so far, I can"t even use the main screen"s slider to unlock, giving me the impression it doesn"t recognize my finger trying to swipe it. I can tap on it and the screen soon goes back into low-power mode.

I see several parts for the front panel (front panel, kit, assembly). Which part do I need to replace? Should I get any other parts that are likely to be a problem after fixing the touch screen? Any tips or suggestions otherwise? Also, does this mean the logic board is likely to NOT be a problem since it"s booting up and charging? (I hope that"s the case, I don"t see any logic boards for sale!)

Oh no! You have dropped your phone in the pool by accident. Hell freezes over as you scream in terror and relive the great times you have had with that phone since you need to get a new one. Well, not anymore! WithOC Mobile Device Repair, you can get cell phone water damage repair without much effort. It’s rather a cost-effective way to get your old phone back.

When dealing with cell phone water damage, it is best to take it to a repair center as soon as possible. Bring your phone to OC Mobile Device Repair. The company promises to review the damage and put in all of efforts to restore it. With skilled technicians and affordable prices, they are the best bet that your phone can have. Contact now without any delay!

We’re not the type to make up statistics, but we’ll assume that 100% of all phone users would experience a fit of panic if their phone fell in water. If it’s happened already, you probably told yourself that it’s “game over”.

Well here’s the good news. If you backed everything up - you should be okay. But more importantly, phones don’t die upon immediate contact with water, meaning you can fix them even when there’s significant damage.

Water turns into a phone’s kryptonite when it works its way into the ports, jacks and speakers. Once inside, it flows into the circuits. The result? The water, which acts as a conductor, carries a current which then overloads the phone with energy, frying the circuit board.

Certain practices make this worse, such as allowing the phone to dry on its own. Letting water sit in the phone leads to corrosion of its circuits, coils and resistors due to minerals in the water.

This one throws people off too because the damage isn’t immediately apparent in all cases. Sometimes, the water might take a little longer to reach vulnerable components. That’s why someone can drop their phone in water without any noticeable effects. But the following day, those poor souls won’t be able to turn on their phones.

The other thing to keep in mind is the source of water. Dropping your phone in a puddle or the toilet is bad, but dropping it in the ocean, and you can kiss that phone goodbye. Salt water is highly corrosive and will damage a phone’s components much quicker than freshwater. So be careful when taking selfies on your yacht.

Now explanations are great but solutions matter way more. Water doesn’t waste its time in circulating through your phone, and the damage it causes is never far away. So if your phone fell in water, you need to act fast.

Here’s the truth - simply allowing your phone to dry off completely on its own isn’t a good idea. Remember, water does its damage under the surface where your hands can’t reach. Power to you if you’re mechanically-inclined and repair your own devices, but if you can’t, let the experts do the dirty work.

Dropping a phone in water happens to the best of us. With that said, some people just seem to have their you-know-what together and don’t seem to have these accidents. A few simple tips can put you in their league and keep your phone dry.

Get a water-resistant case or phone -There’s no such as waterproof cases or phones, but water resistant phones can survive a brief drop in water with no harm done. The keyword here is brief.

Be mindful of your surroundings -You’ll most likely have the experience of having dropped your phone in water at some point, or at least a close call. So hold your phone tighter or put it in your pocket if you’re walking on or near watery surfaces.

Assuming you respond quickly, it will live. Follow the tips mentioned above, and even serious water damage shouldn’t leave your phone completely sidelined. The worst that might happen is a temporary vacation from your device while it’s under repair, and having to use an old-school, loaner flip phone.

Your LCD computer screen or any other LCD Display can get ruined due to water damage. If water in laptop screen is visible in the display or even you have a hint of suspicion that water has penetrated your screen then take action immediately because leaving moisture unattended in the laptop screen will surely cause permanent damage. If you remove the moisture quickly then your screen and the entire system have a chance to recover and return to normal display by resuming its operations.

When moisture is detected on your computer and specifically in the LCD screen then you need to unplug your power cord and shut down your computer. Your computer will short which may cause serious damage if the water creeps into the live circuit. Remove the battery completely from the laptop or remove all the cord connects from the monitor display after the power is turned off when you shut down your laptop. Then take a paper towel to blot the keyboard by absorbing water from the screen exterior. To prevent it from working into the computer remove as much water from the exterior as possible. Then place the laptop next to your fan so as to encourage evaporation while you prepare for the next step.

We recommend that you purchase a large bag of rice by adding rice to a storage bin, bucket, or any dry plastic container that is large enough to accommodate the computer with the rice combined. Then fill half of the bin to start by setting the entire laptop or the LCD monitor on the rice and add more rice until it is completely covered, then seal the container. Here the type of rice is not important as you can use any type of rice whichever is least expensive. The rice creates an ultra-dry environment by absorbing the water. The rice pulls away from the moisture by drying out your LCD screen’s water damage. This works for most of the electronic devices in which water has entered. We recommend that you leave the screen in the rice for full 24 hours. Then pull out the screen by wiping away any residue from the rice with a soft cloth to avoid any scratches on the screen.

By now ideally, the rice must have absorbed your laptop screen water cloud or other LCD water display issue. Then after cleaning the screen replace the battery or cords and reconnect the power. Then turn on the laptop unit to test the screen. You need to watch for any flickering or any odd behavior which indicates that water is still present. If the laptop screen is performing normally then it indicates that the water is removed. If the problem still persists then return it to the rice bin by leaving the unit submerged in dry rice for several days. This process works, however, it works slowly. You can also use the kitty litter method by absorbing the moisture in case the rice method fails. The litter method is used to grab moisture by holding it in clumps. In an extreme case, you need to buy silica gel packets like those found in shoeboxes which will also work for repairing LCD screens having water damage.

Here is theConclusion abouthow to remove water from lcd screen -We hope this blog will be useful for our laptop users who find it difficult to repairLCD Screen Water Damage.

Laptop screen water damage is a common problem. It can happen when you spill liquid or food on the laptop. It may also occur if you accidentally spill water on your laptop while it"s being used outdoors or in a wet room. If the damage isn"t quickly cleaned, it can lead to permanent loss of data and/or hardware failure.

There are many causes of laptop screen water damage,but most are preventable. The following tips will help keep your laptop safe from accidental spills and other water-related accidents:

If you accidentally spill something on your laptop screen, don"t panic. You can still salvage the plastic cover and get it clean with a little effort. Simply use your vacuum cleaner to suck up any water that has managed to penetrate the cover. If there is any liquid left behind, you can use a soft cloth or paper towel dampened in rubbing alcohol to wipe it away. Be sure not to use anything abrasive as this can scratch the screen.

You also need to be careful about blowing air directly at the screen if you want it to stay dry. Blowing air directly across the computer"s surface can create static electricity that causes damage over time. Instead, place some towels over areas of your laptop"s case where there may be liquid present and blow across them gently with a fan turned off or on low power (keep in mind that this will also help with dust).

The most common reason for water in monitor screenis a broken seal around the monitor. The seals are plastic or rubberized strips that keep dirt and dust from getting inside of your monitor. When these seals break, they can cause water to leak into your computer.

Through the car touch screen, also known as the infotainment screen or itouch screen, we enjoy a lot of advantages such as music playing, GPS navigation, voice recognition, etc.

You wouldn’t want such a precious thing to get damaged or destroyed, so it’s a must to take proper care of it, including observing the proper way of how to clean your car touch screen.

To clean it, it must be turned off, gently wiped with a microfiber cloth sprayed with a cleaner in an up and down motion, and wiped dry with another clean microfiber cloth.

Since the touch screen is delicate, cleaning it should be done with caution. And that includes using the right materials for the task to avoid causing any damages. So make sure to prepare the right materials for cleaning itouch screen, which are listed below:

The soft texture and non-abrasiveness of a microfiber cloth make it the best type of cloth to use when cleaning touch screen in car. With it, you can gently clean the car touch screen without leaving any scratches. You will need one for cleaning the car touch screen with a cleaner and another for wiping the surface.

Avoid materials like paper towels and cotton rags, as they’re highly abrasive and won’t do well in lifting the dirt from the car touch screen. Another thing to avoid is alcohol-based wipes, as they are damaging to touch screens, can leave streaks, and aren’t very soft.

A car touch screen can be cleaned with only the use of distilled water. Just distilled water would be enough for cleaning off the fingerprints and dirt on a car touch screen. Avoid tap water, as it can leave some residue from its minerals.

If there are stubborn grease, splatters of soda, or other accumulated deposits on your car touch screen, you can make use of an alcohol-and-ammonia-free cleaning solution.

Do not clean touch screen with alcohol or ammonia-containing products like household windows or kitchen cleaners, as they can damage the car touch screen. Other things you should avoid to not damage the car touch screen are solvents, kerosine, gasoline, acidic and alkaline solutions.

Or, you can make a DIY car touch screen cleaning solution. You can create one by combining equal parts of distilled vinegar and water. The vinegar’s acidity will dissolve the oils, sugar, and protein on the car touch screen’s surface, which will allow you to wipe them off more easily.

The steps in cleaning the car touch screen are very easy to do. Just remember to execute them with caution to avoid damaging it. Do the following steps with care:

Before you clean touch screen in car, you must turn it off first. You should never clean the car touch screen when it’s on because that would interfere with the pixels. Also, with the car touch screen off, you’ll be able to see the dirt and oils much better on the dark surface.

Spray the cleaning solution on a microfiber cloth for cleaning the car touch screen. If the oils and dirt on the surface aren’t too much or stubborn, then distilled water would work just fine. But if its surface is too filthy and with stubborn oils and dirt, then you need to use the commercial cleaner or the vinegar and water cleaning solution.

While there are different options for the cleaner, the best way to clean touch screen would be to lightly spray the cleaner on the microfiber cloth and gently wipe the car touch screen in an up and down direction.

You should not spray the cleaner on the screen directly, exert too much pressure on it, and pick off the stubborn debris with your fingernail, as doing these can damage it.

Or you may also wipe the screen in a side to side manner if you have a wider screen. Don’t wipe the screen in a circular motion, as it’s not as effective in cleaning.

After you’ve cleaned the car touch screen with a microfiber cloth and cleaner, wipe it again with a clean, dry microfiber cloth to dry it. Use the same wiping direction as you did in the previous step, either up and down or side to side.

How to clean your car touch screen is a super easy three-step process, and it can even be done with readily-available things at your home. However, if done wrong, the screen could get damaged. So always make sure to do it carefully.

The iPhone XR packs a lot of punch at a great value. The iPhone XR has an excellent battery life, a large LCD display around 6.1 inches, is backed up by the wildly-powerful A12 Bionic chipset inside and comes in lots of color choices. The iPhone XR is also water resistant, but this doesn’t mean that your iPhone XR will survive if you drop it in water. If your phone has experienced liquid damage; bring it to the nearest uBreakiFix for a fast and high-quality repair.

When you bring your iPhone XR water damage repair to uBreakiFix, we’ll do a free comprehensive scan to determine the extent of the water damage to your phone. Then we’ll present you with a repair plan, including cost and time estimate, so you can decide if you want to move forward. If you do, we’ll get started right away and many repairs can be completed within an hour.

The skilled techs at uBreakiFix will provide you with the highest quality service for your iPhone XR water damage repair. Our team has qualified training to work on your iPhone and repair the damage that water can do to all the components of your iPhone. We know the investment you’ve made in your iPhone XR, and you can trust that your iPhone XR water damage repair will be done properly and affordably. We guarantee the lowest price on all of our repairs, and if you find a lower price for the same repair, we’ll beat it. We also give a 1 year warranty on all parts and service, so you can feel confident that your phone will keep working.

You love your iPhone XR and water damage can really havoc on your device. Don’t despair, bring your iPhone XR water damage repair to your local uBreakiFix and let our techs get to work on your iPhone ASAP. A high-quality repair at an affordable cost, guaranteed.

I dropped my phone in my dog’s water bowl accidentally last night. I managed to dry it out before it was to badly waterlogged. It worked initially but this morning i was getting a no sim/no service message. I opened the phone to check and there was a bit of water still inside. I dried it out and after a bit it seemed to work. Now I just keep getting the above mentioned message again. What should I do?

Sorry to hear about your phone. Water damage can certainly be a phone killer for sure. From your description there might still be moisture in the SIM card area of your device. Speaking of “device” what phone did you happen to accidently drop in water, if you don’t mind me asking?

I would take the SIM card out give it a good cleaning and make sure that the port on the phone that your SIM plugs into is completely dry and that you don’t see any signs of buildup of any kind (such as calcium or mineral deposits). You might even want to remove the SIM card from your cell phone and let it dry some more. I am sure that you have already heard about the rice drying trick, if you still have a bag of rice available (a Ziploc bag works well) then you might want to let it sit in rice over night just for good measure.

Just try and make sure that that SIM card tray or port is nice and clean and that the SIM and the phone have a good connection. If there is something that is now in that port and the SIM and phone do not have a good connection then your cell phone won’t read the SIM card and you won’t have any service. There is also the chance of water damage which often requires you to look into your replacement or repair options as an actual piece of hardware could have been damaged.

Good luck Robert, thanks for visiting the site and don’t hesitate to leave another comment if you have any more questions or if you would like to let us know if the suggestions onHow to fix a water damaged cell phone seem to help resolve your issue.

Hi, I went fishing with my dad and my Sony Xperia phone dropped down a hole in my trousers and the trousers were soaked. I took the phone out of the trousers and the phone was pretty much dry but the phone wouldnt turn on. I have tried to dry it out and charge it but still no joy and its not coming on.

Fishing is one of the best pastimes that you can do with your dad. Some of my best memories of childhood involve going down to the river with my dad. If your cell phone isn’t waterproof and you don’t have a waterproof protective case the next time you go out fishing, or another activity where you might get a little wet you can use a Ziploc bag (and maybe even double bag it to be extra safe) to keep your phone nice and dry. That way you don’t have to part with your phone, you’ll have your phone available for emergencies and you won’t have to worry about water damage.

Before troubleshooting your Sony Xperia for water damage make sure that you try this simulated battery pull trick first. Sometimes Sony Xperia smartphones like to pretend that they are broken even though they’re not. So try the advice in that guide first and if you can’t get it to turn back on then come back and proceed to the advice below.

Did your phone hit the ground or did it just sit in a soaked trouser picket? If water got into the phone then it could have caused some damage. River water can be a little dirty too there might be some left over minerals in the phone causing issues.

It’s hard to say for sure but you might get lucky and may be able to fix it with a quick 99% isopropyl alcohol bath. If the river water caused a short in the phone then you might not be able to fix it but if there is some leftover water or some dirt or other mineral deposits left in the phone and that is what is causing problems then the alcohol might help as it can get into all the nooks and crannies in your cell phone and help to clean it out. I talk a little more about this in how to try and fix a phone dropped in waterif you care to read more about it and since your phone is completely unresponsive I don’t think that you have too much to lose by giving it a try. So check out that other guide and let me know if it helps or if you have any more questions.

Hi James, the phone was supposed to be waterproof, it was a phone i got from my dad and he said it was waterproof. When i looked at the phone it had water in the camera and that was it, when i told my dad it wouldnt work when we were fishing he said it could have caused a short in the phone and to leave it for so long. I tried it a bit later on in the day and it still wouldnt come on. I will check out your other guide James.

H, My moto G fell under water few days back for 2 to 5 Seconds I immediately picked it up and swiched it on to see if it was working. It was working perfectly but after some time the battery of my phone was very low so it switched off and now I can’t turn it on. Even if I put it on charging then also it is not switching on just the white LED is blinking thats all. Please Help.

Hey, my Moto G has been dropped in the water a while back , like 2 months ago . And ever since then it wouldn’t come on at all ….. i charge it alot and the only thing that pops up is the LED light , and 0% .what do i do.

After dropping a phone in water the most common issues that seems to occur are power related. Whether the phone stops charging properly or it stops turning on, or powers off suddenly for no reason, power related issues often go hand in hand with water damage. These unfortunate and aggravating issues can happen right away as in your situation Jay or can creep up quite suddenly as in your case Anugrah.

Since neither of the phones are going to be covered under the manufactures warranty (water damage voids the warranty) then you don’t have too much to lose at this point and I would try a quick 99% alcohol bath and if that doesn’t work you can try to find a new battery and then replace the battery yourself. Motorola can swap the battery for you BUT as of today they charge “$75 plus applicable taxes” in order to do it and we don’t even know for sure if it is the battery so it would be a pretty big gamble, and it might be more affordable to just get another unit or file an insurance claim (if applicable).

Sorry I couldn’t be of more help. Hopefully the alcohol bath helps to revive your Moto Gs. If you want to read more about that revival method then make sure to visit the “How to fix a water damaged phone” which is linked to at the bottom of the article above.

If you took your cell phone to a Motorola service center then chances are they would say “this phone has water damage, that’s why it’s not working”, which we already know. Changes are very high that they would NOT soak the phone in 99% alcohol as it’s more of a poor man’s solution and a last resort when trying to save a cell phone dropped in water. Motorola isn’t responsible for products that have been damaged. They might offer to take the phone apart for you to see if they can repair it but I am unsure of the price they would charge you to do it.

Mine fell in the toilet and it was working fine but there wasn’t enough rice to put it in but I dried it off. The led light keeps blinking and the screen comes on but it won’t work if I touch the screen like to unlock it or check a message it won’t type or anything.

Sorry to hear about your Moto G, since your phone is not responding to your touch and means that the touch screen was affected by the water. I can’t say if the phones screen is damaged or not but there may be a chance of fixing it with an alcohol bath (see other comments and visit the guide mentioned at the bottom of this article) and of course making sure that your Moto G is completely dry before trying to use it again.

If the alcohol bath doesn’t seem to help and your sure that your cell phone is completely dry then the water may have damaged touch screen on your phone and you will likely need to replace the touch screen in order for your phone to function properly again.

Help, early today I dropped my LG in the pool I didn’t get to get the warranty on it yet. As soon as I dropped it I picked it up took the protective cover off and attempted to dry it , at the time I didn’t have rice. After awhile I plugged it up the screen came on but blinked in and out and finally went black. I got my camping air pump to blow it dry that didn’t work I plugged it in and the charging light is on but my screen is still black. Finally after an hour I got some rice and put it in the rice but do you think it is to late to save seeing as I blew it with the pump and my screen went black before I put it in the rice? Please help….

It’s almost impossible to say for sure whether or not your screen, and the rest of your cell phone, will work properly again once the phone is completely dry. Try to give it enough time to dry though, you don’t want any residual pool water to cause an electrical short (which may have already happened *knock on wood*).

If a piece of hardware shorts out or gets damaged, such as the LCD screen, then usually that piece will have to be replaced. If too much damage is done or the piece in question cannot simply be replaced then sometimes the repair costs would be too high and it would be cheaper just to buy another cell phone.

We won’t know for sure until your cell phone is completely dry and you try to power it on again. Moisture can cause all kinds of problems when it comes to cell phones or any electronic for that matter so in this case time will tell.

Since your cell phone was dropped in water it is no longer covered under warranty, if you have issues trying to boot it up after its dry then make sure to refer back to the article above and review the “Still not working properly section” it MIGHT help get all that left over chlorine and mineral deposits out of your cell phone which could help as well.

Hi. My daughter was dunked in pool a couple of days ago and the person didn’t realize she had her phone on her. She immediately took the phone apart (SIM, battery, etc.) and placed it in a bowl of rice. It’s now been 4 days. Phone turns on and seems to be receiving calls and messages, however, screen in blank (won’t turn on). I ordered a micro phillips screwdriver on line and hoping I can clean it’s components (mother board, connectors, etc.s) Any suggestions?

I dropped my phone in water. Read the instructions and inserted it into a rice bowl. After 2 days, I tried to start it and it did start. The only issue is the touch screen does not work. the welcome screen pops up but, I can’t unlock my phone since the touch isn’t working… It’s frustrating….Please HELP!!!

It sounds like the water may have caused damage to your cell phones touch screen or has affected something else in the phone that allows the touch screen to function correctly. Hopefully the advice mentioned HERE can help get it working again. If not then you might need to look into replacing your cell phones touch screen to see if a replacement can get your phone operational again. Without a working touch screen your smartphone isn’t going to be of much use.

Water damage can be a tricky thing to try and solve. Some parts of the phone it can effect causing them to stop working while other parts of the phone may continue to work just fine. Sometimes after completely drying the phone everything will work fine for a day or two or a week or a month and then all of a sudden it can start to have issues.

My phone dropped in water few days back .After drying it for 1 day,i switched it on.Everything is working fine except wifi.Wifi is on but it is not connecting to any network.I tried turning it off and again turning it on.But it is not working.Please give any suggestions.

I dropped my phone in the toilet about a week ago and when the screen goes black to load a game or something I see water marks on the screen I was wondering if that is a horrible thing and if It’s important to get it fixed right away or whenever I have a chance. Thank you…

That incident is actually more common than you might think. It’s good to know that your phone is still functioning properly. Water damage can cause all kinds of problems.

When you say “water marks” are you referring to a left over mineral deposit that remained once the phone was completely dry? If so, I don’t think that it will be a horrible thing to just leave alone, so long as you don’t mind seeing it when the screen is black and I don’t think it’s likely to cause any considerable damage later.

If it becomes an annoyance or you notice that your touch screen is not responding as it should or if the phone starts having any issues with the display screen then you could take the phone apart and give it a good cleaning and then put the phone back together. If you doubt your own tech skills then a local repair shop could probably do this relatively quickly as they will have all the tools and experience and since no parts are actually being replaced it would likely be pretty affordable as well.

So I dropped my phone in a cup of water a couple days ago and right I way I put it in rice I left it there for 2 days to dry, then I charged it. It worked. But then maybe 20 mins later the screen wouldn’t slide. I tried holding down the lock button and home button, but its not working. Any idea what would help without having to pay for it to be fixed ?

Sounds like the moisture might have done a number on your touch screen. What you might be able to do will depend on how bad it affected it. If the touch screen was damaged then it’s likely that you will need to pay something in order to get it repaired/replaced. Since it worked originally if only for a little while though there may be hope and you might be able to fix it.

Anyway I completely forgot my phone was in the pocket annnnd it went through the washing machine