russound kpl keypad with lcd display free sample

The KPL Keypad controls a CAS44 or CAA66 multiroom system. Its five-character display aids in source selection, offering over 100 source labels to name your sources. The display also indicates volume and system status.

Easily adjust the bass, treble, balance, loudness and volume directly from the keypad to personalize the sound playback in any zone. For added convenience, you can turn the whole system off at any keypad.

Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder"s responsibility to determine condition, age, genuineness, value or any other determinative factor. J Sugarman Auction Corp shall endeavor to describe in detail each item and any pertinent information about it. J Sugarman Auction Corp will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold "AS IS" and that they may not return any item they purchase. J Sugarman Auction Corp is providing Internet bidding as a service to Bidder. Bidder acknowledges and understands that this service may or may not function correctly. Under no circumstances shall Bidder have any kind of claim against J Sugarman Auction Corp or anyone else if the Internet service fails to work correctly before or during the auction. J Sugarman Auction Corp will not be responsible for any missed bids from any source. Internet bidders who desire to make certain their bid is acknowledged should use the proxy-bidding feature and leave their maximum bid before the auction begins. J Sugarman Auction Corp reserves the right to withdraw or re-catalog items in this auction.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

For 230V, 50Hz operation please select the power cord for your area. Select the plug for your area at one end and a IEC320 connector at the other. It is not necessary to make any other changes. If you have any questions please call Russound Inc. at 1-800-638-8055 or 603-659-5170

with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.

8.Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings, or placed in abuilt-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

2.Do Not Touch The CAV6.6 With Wet Hands – Do not handle the CAV6.6 or power cord when your hands are wet or damp. If water or any other liquid enters the CAV6.6 cabinet, take the CAV6.6 to a qualified service person for inspection.

4.Care – From time to time you should wipe off the front and side panels of the cabinet with a soft cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since this may damage the finish or remove the panel lettering.

UNO-S2 Keypad .....................................................................................................................................................

UNO-S1 Keypad ...................................................................................................................................................

UNO-S2 Keypad Button Functions..........................................................................................................................

Keypad Wiring......................................................................................................................................................

UNO-S2 Keypad Front Panel..................................................................................................................................

UNO-S2 Keypad Rear Panel...................................................................................................................................

Keypad Location ..................................................................................................................................................

Keypad Installation ...............................................................................................................................................

Keypad Connections.............................................................................................................................................

UNO Keypad Port Connection ...............................................................................................................................

UNO-S2 Keypad Diagnostic Menu ..........................................................................................................................

3 - Zone Keypad Expansion ..............................................................................................................................

Thank you for choosing the Russound®CAV6.6-S2 System to enhance your home with distributed audio and video. This system’s state-of-the-art features and components blend seamlessly with your unique lifestyle and preferences.

The UNOTM-S2 keypad’s F1 and F2 buttons are preset favorites. These easy-to-set buttons make it possible to hear your favorite radio station or watch your favorite satellite channel at just the right volume in your room with just a button push. Want something new? Just re-save the Favorite with a new choice.

Ready to set the mood? In Party Mode, you just pick the source and the sound settings and hear the music throughout all the rooms. The Master keypad simultaneously controls all the keypads in all the rooms to effortlessly select or control the components. A great benefit of the Party Mode feature is the ability to transfer the Master keypad mode to any keypad in the system. If the living room is the center of the party, use that room’s keypad as Master. If the party moves to the sunroom and porch, that room’s keypad can be set to Master instead.

This handy feature lets you easily hook up an additional temporary audio/video source through the front of the controller. This way, your teenager can set up a game console when his friends come over, and easily take it down without having to leave the games set up in the living room. Or your family can watch the video camera playback of the holiday gathering while everyone is still there.

Here at Russound we are proud to continue providing innovative and intuitive A/V product solutions to the world. When you link the industry-leading CAV6.6-S2 system with Russound’s commitment to its products and customers, you have truly made – “the right connection.”

The AUX IR jack adjacent to the line input accepts an IR Emitter with a 1/8” plug (e.g., Russound 845.1 IR emitter). The emitter’s other end attaches to the IR window of the component to control the auxiliary source.

4IR RECEIVER - Receives IR signals and passes them to the controller and source equipment. Also used when operating the UNO Keypad by using theUNO-LRC1 remote

4IR RECEIVER - Receives IR signals and passes them to the controller and source equipment. Also used when operating the UNO Keypad by using theUNO-LRC1 remote

The power switch for the CAV6.6 controller is "on" in the up position. Any active room is indicated on the front of the controller by a green backlit label, which shows red when the room is inactive. In most basic installations, all functions and room settings are controlled through the corresponding UNO System Keypads.

disk or channel (e.g., channel 45). Wait for the keypad to show the source name, then press and hold the F1 or F2 within 15 seconds of setting the numeric selection to save the setting.

The command keys allow control of the selected source at the UNO Keypad. The command keys are activated with a press and release, or press and hold to access secondary functions.

When in “PARTY MODE” the system is primarily controlled by a “MASTER” keypad. Party Mode links all rooms to the same source which is selected by the Master Keypad room. Any keypad in the system can become a Master keypad (if enabled) but only one Master Keypad may exist at a time in Party Mode. Selecting Master keypad mode from another keypad will transfer Master keypad control to that room and release it from the first. When the source selected in the Master keypad room is changed then the source for all rooms changes as well.

Volume level changes at the Master Keypad will be reflected in all rooms in Party Mode. NonMaster zones in Party Mode can temporarily override Master Keypad volume level adjustments for their particular room preference. F1 and F2 favorite presets selected from the Master Keypad will be enabled in all rooms in Party Mode. Master Keypad will not change Bass, Treble, or Loudness adjustments for any other rooms other than the Master Keypad room. Every other keypad will still operate its respective bass, treble, balance and loudness adjustments for that room.

Party Mode command from affecting this room. When another UNO Systems Keypad selects the same source, a DND message will scroll on the the LCD panel, alerting the user the source is in Do Not Disturb mode.

When in “PARTY MODE” the system is primarily controlled by a “MASTER” Keypad. Party Mode links all rooms to the same source which is selected by the Master Keypad room. Any keypad in the system can become a Master Keypad (if enabled) but only one Master Keypad may exist at a time in Party Mode. Selecting Master Keypad mode from another keypad will transfer Master Keypad control to that room and release it from the first. When the source selected in the Master Keypad room is changed then the source for all rooms changes as well. The keypad will scroll a PARTY message on the LCD panel. It will scroll a MASTR message in lieu of PARTY if Master is enabled.

Volume level changes at the Master Keypad will be reflected in all rooms in Party Mode. NonMaster zones in Party Mode can temporarily override Master Keypad volume level adjustments for their particular room preference. Master Keypad will not change Bass, Treble, or Loudness adjustments for any other rooms other than the Master Keypad room. Every other keypad will still operate its respective bass, treble, balance and loudness adjustments for that room.

Do not connect the controller"s main power feed until all other connections have been made and verified. Live connection or removal of the keypad wiring or other wiring when the system is powered can cause communication problems in the network. Double-check terminations during each phase of the installation to prevent accidental damage. Incorrect wiring is the number one cause for non-war- ranty product damage.

•AreA-BUS®sub-zones needed? A-BUS subzones are only available for zones 1 - 4. The A- KP2 amplified keypad can provide direct source selection for only the first four sources when in ‘Multi’ source mode.

•It is recommended that the CAV6.6 and the source equipment be plugged into a dedicated20-amp circuit with an isolated ground. A power line conditioner can reduce interference problems caused by noise found in some electrical systems.

•To determine the amount ofCAT-5 wire required for the system installation, first decide how many keypads will be used, then determine the distance between each intended keypad location to the intended CAV6.6 location. The maximum recommended wire run length is 250 feet for each UNO Keypad.

•Make sure that the entire wire path between keypads and CAV6.6 is clear and not obstructed by a floor ceiling joist, or masonry wall which can’t be drilled through.

•If you plan to use an additional IR receiver with an UNO keypad, first determine the location of the IR receiver, then measure the distance from the intended location to the UNO keypad location. Incorporating optional IR receivers will require additional wire. Consult the selected IR receiver model’s manual for the specific wire needs.

The best infrared remote performance is achieved with the keypad away from any direct sunlight, plasma TV, and low voltage lighting controls. Also consider convenience when choosing a location.

The UNO-S2 Keypad uses a 110-punchdown terminal to provide a simple installation and strong connection for CAT-5 cable’s eight conductors. Punchdown terminals require the use of a punchdown tool which has been provided with the keypad kit. Attach the CAT-5 cable to the 110-punchdown terminal on the UNO-S2 Keypad as shown, matching the conductor colors to the connection color guide. The keypad will not operate properly if the terminations deviate from the required connection order.

Take care when using an impact 110 punchdown tool, as this may overspread the contact points. Use of the impact tool may propel stray bits of wire and jacket into the keypad’s chassis and possibly cause a short in the circuitry. Gently shake or blow

The OS Update Port is is used to update the UNO-S2 Keypad operating system software in the future. When an update is released, it will be available online through the Document Center at www.russound.com.Look for the Technical Documents under Multi-source/Multi-room products. The programming cable is available from Russound, Part #2500-120633.

The jumper settings on the back of the UNO-S2 Keypad can be set for “Run” and “OS Update.” The jumper setting must be in the “Run” position before the keypad is mounted into the junction box, and must remain set in “Run” to operate the keypad. The jumper will be set to “OS Update” only while updating the keypad’s operating systems.

The UNO-S2 keypad has an External IR Receiver In terminal for connecting an external IR receiver such as the Russound SaphIR 858, 862 Eye, or 860 Phantom. Use 2 twisted pair wire with

The UNO System Keypad Ports are located on the back of the CAV6.6 in the top left corner. Connections made at the UNO Keypad Ports are made using CAT-5 T568A RJ-45 wire configuration. CAT-5 is color-coded for ease of installation. For a clean installation when wiring from an UNO System Keypad Port use an RJ-45 CAT-5 patch cable to connect from the keypad port to an RJ-45 Wall Plate (optional). Using the same CAT-5 T568A RJ-45 wiring configuration, use

CAT-5 from the RJ-45 Wall Plate to the keypad. If using more than one keypad on a zone, connect a SA-ZX3 UNO System Keypad Splitter (optional) directly to the UNO System Keypad Port instead of going through the wall plate. Always use the CAT-5 T568A RJ-45 wire configuration when wiring any of the UNO System Keypad Ports.

The CAV6.6 supports up to six audio/video sources. The Source Inputs are located at the back panel. Connect each source output using quality RCA signal cables. Connect the Video, and the Left and Right Audio outputs from each source to the corresponding inputs on the CAV6.6 controller. Label each cable with the name of the selected source and the Source Audio/Video input number located on the CAV6.6.

1.Using an IR emitter (the Russound 845.1 is recommended) attach the end of the emitter with the 1/8”plug to the IR emitter port below the source input.

The speakers are connected to the CAV6.6 using modular snap speaker connectors. Each of these color coded connectors is designated for the speaker set of a particular amplified zone. To avoid confusion, connect one zone speaker set at a time starting with Zone 1, taking care to keep zone and speaker wire identities straight. Note: An 8 Ohm minimum speaker is required for each amplified output.

The Accessory IR jack on the rear of the CAV6.6 allows control of any source equipment without that source being selected on the keypad. The connection for the ACC IR jack is made using an IR emitter with the 1/8’’ plug. The Russound

845.1 single IR emitter is recommended, or use an IR connecting block such as the Russound 857 which allows multiple units to be controlled through the ACC IR Port.

The CAV6.6 has six Zone Audio/Video outputs. The Variable Audio outputs can be used if additional amplification is desired (e.g., Russound DPA-1.2 two-channel amplifier). The Zone Audio/Video Outputs are located slightly to the left of center on the rear of the CAV6.6.

port to an RJ-45 wall plate (optional) for a clean installation. Using the same T568A RJ-45 wiring configuration, attach CAT-5 from the RJ-45 wall plate to an A-BUS hub or amplified control module such as the A-KP2 keypad.

If using an A-BUS hub with the A-BUS Ready Subzone, the hub should be located near the CAV6.6 and wired directly instead of first going through the wall plate.

This 12VDC Trigger input is used to control Power Management of the audio/video sources possibly being shared with a home theater system. When the source equipment is off and 12VDC is provided to the trigger, the sources will be turned on until it is removed. When the last zone on the CAV6.6 is turned off, 12VDC presence to the trigger input will prevent the sources from being turned off. The connections for the trigger are made using a two-conductor cable with 1/8” male mini-plug. The tip is positive (+) and the sleeve is negative (-).

The 12VDC 50mA trigger out can be used to engage any 12VDC trigger device or component such as the Russound ACT-1 triggered outlet. The connections for the trigger out are made using a two-conductor cable with 1/8” male mini-plug jacks at each end. The tip is positive

2 Wow! It s hard to believe that it s been almost 50 years since Russound introduced the industry s first speaker selection system. A lot has happened since then, but what hasn t changed is our commitment to our customers. By listening to our customers we continue to develop products that both you and your customers value, which has helped make Russound the number one brand in multi-room audio. Over the years, our product offering has grown and evolved to feature the industry s most complete line of whole- house audio solutions for the residential and light commercial markets. Grouped into three key categories: Sound Integration Electronics; Speakers; and Connectivity & Control Products; you ll find virtually everything you need to distribute and control audio for every one of your installations from entry level controls to sophisticated streaming media devices. Our products are engineered to deliver years of trouble- free use and are designed to be easy to specify and easy to install, with many of our systems prepackaged for added convenience. Of course, the products are only as good as the company that stands behind them. We provide our dealers with outstanding technical support, training, customer service, and the industry s most extensive warranties. Building on our tradition of sound innovation, we re excited about the many new product introductions featured here. We think you ll agree and welcome your feedback. As always, we appreciate your business and look forward to serving your needs in the coming years and decades. Maureen Baldwin, Owner Charlie Porritt, CEO

3 PREMIUM BUILD QUALITY Russound products are engineered and built for lasting, trouble -free enjoyment PURPOSE-BUILT PRODUCTS Russound designs and engineers solutions that elevate the enjoyment of music AT YOUR SERVICE Russound is committed to providing customers with industry leading training, technical and customer support QUICK AND EASY Time is money, so Russound builds in features that make our products easy to sell, easy to specify and easy to install AT YOUR FINGERTIPS Russound products are conveniently available through leading distributors throughout the US and globally A TRADITION OF SOUND INNOVATION Russound has been redefining innovation in multi-room audio for nearly five decades PEACE OF MIND Install with confidence with the industry s most extensive warranties Advanced Multi-zone... 4 MCA-Series XStream Components...9 Sources...10 Control Accessories...13 Wiring Diagrams Intermediate Multi-zone CAA A-C CA Wiring Diagrams Simple Multi-zone A-BUS Systems...24 A-BUS Components...25 Wiring Diagrams Amplifiers Speakers Connectivity & Control X1 Wire Replacement System...37 Speaker Selectors...38 Volume Controls...39 VC & Speaker Selector Wiring Diagrams IR ComPoint Intercom Plates, Wire & Accessories International Convenience Items...47 Parts Commitment & Contact Info Warranty

4 4 Advanced Multi-zone About advanced sound integration electronics Building on Russound s legendary reliability, simplicity, and sound quality, the new multi-zone controllers now offer increased response time, an array of digital inputs, quicker configuration, and more great content. The evolutionary MCA- 88X, an 8-source, 8-zone controller, features built-in XStream technology, enabling popular streaming content from the cloud, home network, tablets and phones all from a single component. The intuitive MyRussound App conveniently controls the entire system and displays metadata using tablets and phones. In addition, a wide assortment of keypads, touchscreens and hand-held remotes ensures optimum control for any location. Engineered for flexible configuration and easy integration, the controllers satisfy any design challenge. The system allows multiple controllers to be combined to create up to 48 independent zones. The new Russound line of multi-zone controllers delivers the perfect balance of popular music content, audio performance, and optimal control.

5 Russound Resource Guide 2015: Advanced Multi-zone: MCA-88X Controller Amplifier Streamer 5 MCA Advanced Streaming Multi-zone Controllers MCA-88X Eight-Source, Eight-Zone Controller Amplifier Streamer Toroidal power supply for improved performance Audiophile quality DACs support high resolution audio up to 24 bit/192khz Cool running digital W/ch x 6 zones Russound Certified Installer credentials required to activate and install this product* Routed IR for source control Built-in BTC-1X Bluetooth extension input, remote locate up to 300" away Upgraded processor with high-speed bus for increased responsiveness Programmable fixed/variable line out for all 8 zones 2 digital coax inputs 1 digital coax/optical input Built-in XStream streaming audio source 8 source inputs, each with source loop outputs MCA-88X 8 Source, 8 Zone Controller Amplifier Streamer The MCA-88X is an 8 source/8 zone controller amplifier. 8 zones of audio with adjustable bass/treble/ loudness/balance with digital amplification providing 40W/channel to zones one through six, 8 source inputs with loop outputs and fixed or variable line outputs per zone, routed IR, built-in IR learning, a preprogrammed IR library, paging and system muting. Incorporates a built-in XStream audio streamer to offer the best audio from the internet or a user s personal networked audio collection. Bluetooth ready. 17 W x 3.5 H x 17.2 D (432 x 90 x 436 mm) 34.0 lbs (15.4 kg) MCA-88X MCA-88Xi KT2-88X Multi-zone Controller Amplifier System Kit with MDK-C6 Includes: 6 System Keypads (MDK-C6), White Remote Control (USRC) Rack ears IR emitters Wall plates included 38.4 lbs (17.4 kg) KT2-88X KT2-88Xi

6 6 Russound Resource Guide 2015: Advanced Multi-zone: MCA-Series Controller Amplifiers MCA Advanced Multi-zone Controllers MCA-Series Controller Amplifiers MCA-88 8 Source, 8 Zone Controller Amplifier The MCA-88 is an 8 source/8 zone controller amplifier. 8 zones of audio with adjustable bass/treble/loudness/balance with digital amplification providing 40W/ channel to zones one through six, 8 source inputs with loop outputs and fixed or variable line outputs per zone, routed IR, built-in IR learning and a pre-programmed IR library, paging and system muting. Bluetooth ready. 17 W x 3.75 H x 16.2 D (432 x 95 x 411 mm) 34 lbs (15.4 kg) MCA MCA-88i KT2-88 Multi-zone Controller Amplifier System Kit with MDK-C6 Includes: 6 System Keypads (MDK-C6), White Remote Control (USRC) Rack ears IR emitters Wall plates included 38.4 lbs (17.4 kg) KT2-88 MCA-66 6 Source, 6 Zone Controller Amplifier The MCA-66 is a 6 source/6 zone controller amplifier. 6 zones of audio with adjustable bass/treble/loudness/balance with analog amplifiers providing 20W/ channel to all 6 zones, 6 source inputs and fixed or variable line outputs for zones 1 and 2, routed IR, built-in IR learning and a preprogrammed IR library, paging (optional source 6) and doorbell muting. Bluetooth ready. 17 W x 3.75 H x 13.5 D (432 x 95 x 343 mm) 25.8 lbs (11.7 kg) MCA MCA-66i KT2-66 Multi-zone Controller Amplifier System Kit with MDK-C6 Includes: 6 System Keypads (MDK-C6), White Remote Control (USRC) Rack ears IR emitters Wall plates included 30 lbs (13.6 kg) KT KT2-66i

7 A virtual security team for your business 7 The Russound Certified Installer (RCI) Program is designed to provide the best possible product and installation experience to our consumers while maximizing the value that the thousands of Russound installers in the US and around the world offer to their customers throughout the sale and installation process. The RCI program is available to all installers who buy their Russound products through any authorized sales channels, whether it s through distribution partners or as a direct dealer. The Russound Certified Installer program has been created so that key Russound products can only be installed by someone who has been pre-approved by Russound to do so. With the RCI Program, Russound guarantees that a dedicated Russound Certified Installer is fully involved in the installation process of Russound products. This program will also allow us to better control the supply chain of authorized Russound products properly in the field and minimize the risk of consumers unknowingly purchasing B-stock, obsolete, or gray market goods from unauthorized channels. Visit to find out more information.

8 8 Russound Resource Guide 2015: Sound Integration Electronics: RCI Program Russound Certified Installer Program Program Highlights Supported Products The RCI program will be integrated into the new line of Russound multi-zone controllers, the MCA-66, MCA-88, and the MCA-88X. Additional Russound products will join the program as they come to market. Products ship locked All products that are part of the RCI program will be shipped from Russound in a locked state. Once they are powered up, they will only be able to display a message saying Russound Certified Installer Required. The products will not operate until a Russound Certified Installer connects them to the internet and unlocks them. Easy to unlock There is no complex unlocking process. A Russound Certified Installer merely needs to enter their username and password into an RCI product using the web browser on their smartphone, tablet or laptop. All RCI products are internet-enabled and instantly verify the identity of the installer to unlock for use. Distribution Partner customers and Direct Dealers eligible The RCI program is available to all installers who buy their Russound products through any authorized sales channels, whether it s through distribution partners or as a direct dealer. Trackable, while assuring customer privacy Russound knows how important privacy is to its customers. Because of that, no customer information is ever required, entered, or tracked as part of this program. Russound will track the products used in this program only through a unique electronic product identification number that will be paired with the credential of the specific Russound Certified Installer who performed the installation. Russound will not be able to obtain any private customer information through this program. Frequently Asked Questions Q: How can I become a Russound Certified Installer (RCI)? A: It s easy. Use your Russound Portal logon to complete this web form to apply to the RCI program. If you currently share a Russound Portal logon and need your own, you can get one here. Q: How can I verify if I am a Russound Certified Installer? A: It s easy to tell if you are a Russound Certified Installer. When accessing the Russound Portal, all Russound Certified Installers will see the words Certified Installer in the top right corner of all webpages in the Portal. Q: What products will be part of this program? A: The RCI program will be integrated into the new line of Russound multi-zone controllers, the MCA-66, MCA-88, and the MCA-88X. Additional Russound products will join the program as they come to market. Q: Why is Russound locking some of its products? A: This new feature reinforces Russound s commitment to provide the ultimate user experience by guaranteeing that many of our key products are only installed by industry professionals. Q: Does Russound collect or track end user information with this program? A: Russound does not collect any end user personal information. Q: How do I stay informed on updates to the RCI program and Russound products? A: Join our list by visiting russound.com and clicking on the mail icon at the bottom of the page. Q: Do I need to be a direct dealer to be a Russound Certified Installer? A: The RCI program is available to all installers who purchase their Russound products through an authorized sales channel, whether it s through one of our distribution partners or as a direct dealer. Q: All of the installers in my company share a portal login. Can I use that for the RCI program? A: Since the RCI program certifies installers, not companies, each installer must have their own unique portal logon. Q: Will my company be listed on the Russound website once I become a certified installer? A: Yes. As a part of the approval process to become a Russound Certified Installer, your company will be listed in the Russound website dealer finder.* Q: Is there a cost associated with becoming a Russound Certified Installer? A: There is no charge to installers for becoming Russound Certified Installers. Q: Is there an exam that I will need to complete? A: No certification exam is required.

9 Russound Resource Guide 2015: Advanced Multi-zone: XStream Components 9 Advanced Wireless Multi-zone Controllers X5 Wireless Streaming Music System X5 Controller Streamer Amplifier The XStream X5 is a room-by-room Wi-Fi-enabled audio controller, streamer and amplifier. App or keypad controlled, the X5 integrates built-in popular streaming services, such as Spotify, Pandora, TuneIn, vtuner and SiriusXM. Bluetooth ready and with built-in AirPlay support, the X5 can play any audio source from your phone or tablet. The X5 integrates and controls local audio video sources. Hear more of what you love with the high-quality (up to 24-bit, 192kHz high-resolution audio), all-digital X5 platform. The X5 is the most unique and complete distributed audio system available W x H x 9.5 D (29 x 24 x 60 mm) 7.6 lbs (3.45 kg) X X5 EU/UK Digital Media Streaming Source Components DMS-3.1 DMS-3.1 Digital Media Streamer The DMS-3.1 adds three independent streaming outputs (AirPlay enabled) and one AM/FM tuner with RDS feedback to MCA-Series Controllers. Streams content from internet radio stations and music service providers. Provides access and playback of digital audio files on LAN connected UPnP/DLNA devices, including high resolution up to 24-bit, 192kHz sources. Supports content playback from connected USB storage devices. Includes: DMS-3.1 Digital Media Streamer, AM Antenna, FM Antenna, stereo RCA patch cables, rack-mount ears, power supply. Rack-mountable 1U high. 17 W x 8.5 D x 1.75 H (430 x 216 x 44.5 mm) 10.2 lbs (4.63 kg) DMS DMS-3.1e

10 10 Russound Resource Guide 2015: Advanced Multi-zone: Source Components Sources for Advanced Controllers BTC-1X Bluetooth Remote Transceiver Simply plug the The BTC-1X into the Bluetooth input of any Russound Bluetooth ready controller (such as MCA-88X, MCA-88, MCA-66 or X5) to add Bluetooth streaming audio. Remote transceiver allows for optimum placement via CAT-5 wire up to 300 (91.4m). High quality audio codec featuring aptx for superior Bluetooth audio quality. Micro-USB programming cable is included. 2.2"W x 2.8"D x 1.0"H (5.6 x 7.0 x 2.6 cm) 0.3lbs (0.14kg) BTC-1X BSK-1 Bluetooth Source Kit The BSK-1 Bluetooth Source Kit permits Bluetooth enabled devices to stream content to any audio system for wireless audio. It offers a remotely located Bluetooth receiver, optimized for ideal placement and range by the custom installer. The receiver is connected with CAT-5 wire and may be extended up to 300 (91.4m) Applications for BSK-1 Kit: Bluetooth audio solution for any audio system Integrating Bluetooth into a Russound C-Series system When adding additional Bluetooth inputs to a Russound MCA-Series system BTC W x 2 D x 1.5 H (122 x 51 x 38mm) BTC-1X 2.2"W x 2.8"D x 1.0"H (5.6 x 7.0 x 2.6 cm) 0.4lbs (0.2kg) BSK BSK1e ST1 Smart Tuner The ST1 is a single AM/FM tuner with RDS. Works with MCA-Series controllers. 6 banks of 6 presets. Half rack width for side by side installation. Built-in V AC power supply. Rack-mount ears included. 8.5 W x 10.5 D x 1.75 H (21.6 x 26.7 x 4.5 cm) ST1 7.9lbs (3.6kg) ST1e 8.9lbs (4.0kg) ST ST1e

11 Russound Resource Guide 2015: Advanced Multi-zone: System Control 11 Advanced Multi-zone System Control Control any zone with the system Source metadata Content browsing Launcher tool (opens Apps, web browser, web widgets) MyRussound App Control your Russound MCA-Series, X5 Multi-room Audio System and all connected sources from the comfort of your ios or Android device. MyRussound App offers seamless integration with the MCA-Series and X5 controllers. With no additional hardware needed to purchase, simply download the MyRussound app from the itunes store or Google Play Store. MyRussound is only compatible with the MCA-Series Controllers and XStream systems. Upgrade to the latest firmware to ensure optimal performance. XTS Wall-Mounted Color Touchscreen The XTS Touchscreen works exclusively with MCA-Series Controllers and XStream systems. Single CAT-5 connectivity and 1-gang workbox mounting. Connects to the network rather than the controller, making placement even more flexible. 4.7 (11.9 cm) High Resolution QHD Display Runs MyRussound App Powerful Cortex-A9 Processor Supports all MCA controllers and XStream systems Controls any zone in system Gigabit Ethernet, with 802.3af POE Extends from wall only 0.57 (14.5 mm) when installed 3.2 W x 1.34 D x 5.18 H (81.3 x 34.0 x mm) 0.6 lbs (.3 kg) XTS TS3 Touchscreen The TS3 Touchscreen works exclusively with MCA-Series controllers and XStream systems. 3.5 Color TFT Screen with improved off-axis viewing. Single CAT-5 connectivity and 2-gang workbox mounting. Firmware update-capable with streamlined process using a USB flash drive. High-contrast, wide angle TFT color display Supports all MCA-Series and X5 multi-room systems features Displays available system and source information Upgradable firmware through USB port Defeatable front panel IR Receiver Works with Desktop Stand DTS2 to be used on a desk, table, or counter top Easy access to system favorites 6 W x 1.75 D x 4.75 H (15.24 x 4.4 x 12cm) 1.26 lbs (.6 kg) TS3 White See pg 48 for more colors DTS2 Keypad Desktop Stand Desktop Stand is an accessory base that allows the MCA-Series MDK-C6 keypad and TS3 Color Touchscreen to be used on a desk, table, or counter top. Weighted body and non-skid base W x 5.38 D x 4.68 H (152 x 138 x 120 mm) 1.93 lbs (0.87 kg) DTS2 White DTS2 Black

12 12 Russound Resource Guide 2015: Advanced Multi-zone: System Control Advanced Multi-zone System Control MDK-C6 Multiline Display Keypad Wall-mounted, double-gang keypad for the MCA-Series or X diagonal, high-resolution gray scale LCD screen displays real-time system information. Responsive hard buttons provide easy navigation of sources and content. Adjustable brightness, volume, bass, treble, and balance. Access to source selection and control, party mode, all off/on, and alarm and sleep timer. RJ-45 connection. Includes wall plate. 4.5 W x 4.5 H (114 x 114 mm) 1 lb (454 g) MDK-C6 MDK-C6 CONV Color Conversion Kit Includes 1 Trim Plate, 1 Keypad Bezel and 13 Buttons. 4 oz (114 g) White Lt. Almond Almond Bone Brown Black SWP-S21 MDK-C6 with 1 gang Cover Plate for MDK-C6 with space for an additional single-gang component. 2 oz (0.071 kg) White Almond Bone Brown Black SLK-1 Single Line Keypad Wall-mounted, single-gang keypad designed for individual zone control of MCA-Series or X5. Wall plate not included W x 2.7 D x 1.47 H (47 x 69 x 37 mm) 4.0 oz (113 g) SLK-1 SLK-1 Color Conversion Kit Includes 1 Decora insert and 8 buttons for SLK-1. 2 oz (.1 kg) White Lt. Almond Almond Bone Brown Black USRC Universal System Remote Control The USRC Remote Control is the complete solution for all of your remote control requirements. It is designed to operate source devices as well as all Russound and A-BUS audio system keypads. 2 W x 7.75 H x D (5 x 19.7 x 2.9cm) Shipping Weight 1 lb (.45 kg) USRC

13 Russound Resource Guide 2015: Advanced Multi-zone: System Accessories 13 Advanced Multi-zone System Accessories A-SZ4 4 Subzone Hub Controller The A-SZ4 adds 4 A-BUS subzones to MCA-Series controllers. Up to two per controller can be used. Supports A-K4 and A-K6L keypads. Subzones are fully addressable for host zone/ controller. Rack ears included. Half rack width for side by side installation. Note: for A-BUS keypads refer to page H x 8.5 W x 10.5 D (44.5 x 21.6 x 26.7 mm) 4 lbs (1.81 kg) A-SZ A-SZ4e SA-ZX3 Keypad Splitter Increases power output for connecting up to 3 system keypads to one keypad input on a Russound RNET Controller Amplifier. Includes: 1 RJ-45 input jack, 3 RJ-45 keypad jacks, A 12V power supply W x H x 1.0 D (83 x 47 x 25mm) 4 oz (.11 kg) SA-ZX3, with power supply SA-ZX3, w/o power supply Advanced Programming Cable For KP4, KP6, KPL keypads, ComPoint components, ibridge Dock, BTC-1X. Female DB-9 connection (PC end) and flat device pin connection (device end). Length: 72 (182.9 cm) Shipping Weight 1 lb (0.45 kg) KNX-RIO-1 Russound KNX to RIO Gateway Allows KNX keypads and panels to operate Russound controllers via RIO protocol. Connection to the local LAN for IP control. Supports up to 16 zones, 8 sources and 32 System Favorites. Supports Source Metadata: Source Name, Channel, Playlist, Artist and Song Title. Standard KNX bus connection 3.6 H x 1.4 W x 2.4 D (91.4 x 5.6 x 61 mm) 1.6 oz (45g) KNX-RIO-1

16 16 Intermediate Multi-zone About intermediate sound integration electronics Products to match your lifestyle. Music anywhere you want it, at the touch of a button. Our intermediate multizone solutions contain features that allow installers more customization options than our simpler systems. Intermediate System Features*: RS-232 ports for custom integration Source loop outputs Paging Routed IR output Built-in IR libraries Tone controls Party modes CAA66 System CAA66 Controller Amplifier 6 zones (40W/zone), front panel programming center, built-in IR learning, rear RS-232 serial port, extensive builtin IR library, controller link in and out, color-coded detachable 14-gauge snap connectors, rack-mount 2-unit high. 6 IR emitters with controller only, no keypads. Rack ears included. 17 W x 12 D x 3.5 H (432 x 305 x 89 mm) 23 lbs (10.4 kg) CAA CAA66-EU/UK * Not all features available on all systems. See individual product pages for complete feature set and specifications.

17 Russound Resource Guide 2015: Intermediate Multi-zone: CAA66 Multi-zone Controller 17 CAA66 System CAA66K Controller Amplifier Kits Includes: 6 white KP6 single-gang keypads System remote control Amplifier controller Wall plates not included 17 W x 12 D x 3.5 H (432 x 305 x 89 mm) 29 lbs (13.2 kg) CAA66K CAA66K-EU/UK CAA66L Controller Amplifier Kits Includes: 6 white KPL single-gang keypads with LCD System remote control Amplifier controller Wall plates not included 17 W x 12 D x 3.5 H (432 x 305 x 89 mm) 29 lbs (13.2 kg) CAA66L CAA66L-EU/UK KPL LCD Keypad In-wall Decora style single-gang keypad featuring backlit LCD panel, amber backlit soft-touch buttons, assignable source names, IR pass-through, 110 punch-down connector, system status feedback, user adjustable zone bass, treble, loudness and balance. Wall plate not included W x 2.7 D x 1.47 H (47 x 69 x 37 mm) 4.0 oz (113 g) KPL KPL 6 Color Conversion Kit (for KPL) Includes 6 Decora inserts White Lt Almond Almond 2 oz (.1 kg) Bone Black Brown KP6 System Keypad In-wall Decora style single-gang keypad featuring amber backlit soft-touch buttons, 20 source name labels, source selection, plus IR pass-through and confirmation. 110 punch-down connector, installer adjustable zone bass, treble, loudness and balance. Wall plate not included W x 2.7 D x 1.47 H (47 x 69 x 37 mm) 4.0 oz (113 g) KP6 KP6 6 Color Conversion Kit (for KP6) Includes 6 Decora inserts White Almond 2 oz (.1 kg) Bone Black Brown KPSC Optional Source Control Keypad (for KP6 or KPL) In-wall Decora style single-gang keypad accessory adds source control and numeric control capability to KPL keypads. The keypad has amber backlit soft-touch buttons. This is not a standalone keypad. Wall plate not included W x 2.7 D x 1 H (47 x 69 x 25 mm) 3 oz (85 g) KPSC KPSC 6 Color Conversion Kit (for KPSC) Includes 6 Decora inserts White Almond 2 oz (.1 kg) Bone Black Brown

18 18 Russound Resource Guide 2015: Intermediate Multi-zone: A-C68 Multi-zone Controller A-C68 A-BUS Intermediate System A-C68 6 Source/8 Zone Multi-zone Controller Rack mountable, 1-U high, rear RS-232 port, 2 RJ-45 expander jacks, 6 single IR emitters. IR library, sleep timer, IR learning and paging. Controller only, no keypads. Rack ears included W x 10.5 D x H (42.5 x 26.7 x 5.4 cm) 12 lbs (5.4 kg) A-C A-C68-EU/UK A-C660 6 Source/8 Zone Controller Kit Includes: Multi-zone Controller (A-C68) 6 Amplified LCD Keypads (A-K6L) System Remote (USRC) 6 IR Emitters Wall plates not included 18.5 lbs (8.4 kg) A-C A-C660-EU/UK BTA-2 A-BUS Bluetooth Module This wall-mounted local input module integrates with Russound A-BUS multi-room systems. The A-BUS Bluetooth receiver streams content to the local A-BUS keypad, so it serves as a local source within any room W x H x 1.75 D (45 x 73 x 45mm) 0.4 lbs (0.18 kg) BTA-2 BTA-1 A-BUS Bluetooth Module Wires in line with CAT-5 between hub or controller and keypad. The A-BUS Bluetooth receiver streams content to the local A-BUS keypad. Works with A-K6L only. 2.7 W x 0.9 H x 2.2 D (68 x 23 x 57 mm) 3.1 oz (0.09 kg) BTA-1 A-K6L Amplified LCD Keypad Digital amp, LCD panel and IR receiver. Bass, treble and loudness control. Pre-amp output, configurable turn on and page volume levels. Page enable/disable, RJ-45 connector. Wall plate not included W x H x 1.75 D (45 x 73 x 45mm) Shipping Weight 0.4 lb (0.18 kg) A-K6L White A-K4 Amplified Keypad Analog amp, IR receiver, preamp outputs, left and right gain controls with RJ-45 connector. Wall plate not included. See page 48 for color conversion kits W x H x 1.75 D (45 x 73 x 45mm) Shipping Weight 0.4 lb (0.18 kg) A-K4 White A-LC3 Local Source Input IR emitter for local source control, auto sensing to override audio, wires in line with CAT-5 between hub or controller and keypad. Wall plate not included. See page 48 for more colors W x H x 1.75 D (45 x 73 x 45mm) Shipping Weight 0.4 lb (0.18 kg) A-LC3 White

19 Russound Resource Guide 2015: Intermediate Multi-zone: CA4 Multi-zone Controller 19 CA4 Intermediate System CA4 Multi-zone Controller 4 source/4 zone rack mountable, source grouping, party mode, 1-U high, 4 zones at 30W/zone, rear RS-232 port, RJ-45 expander jack, 4 single IR emitters. Fixed and variable line output (Zone 4 only). CA4-WP and Rack ears included W x 2 H x 8.75 D (43 x 5 x 22.3 cm) 11 lbs (5.0 kg) CA CA4-EU/UK CA4-KT1 Multi-room Controller System Kit Includes: Controller (CA4) 4 System Keypads (CA4-KP) Wall Port (CA4-WP) 4 IR Emitters System Remote Control (USRC) Rack Ears Wall plates not included lbs (6.6 kg) CA4-KT CA4-KT1-EU/UK CA4-KP System Keypad Single-gang, in-wall Decora style keypad for control of a CA4 multi-zone audio system. 1 RJ-45 connection. Wall plate not included W x H x 1.25 D (45 x 73 x 31.8 mm) 0.2 lbs (0.1 kg) CA4-KP White CA4-KP Color Conversion Kit Includes (4) Decora inserts and 1 wall port insert White Lt Almond Almond 2 oz (.1 kg) Bone Black Brown CA4-WP Wall Port Single-gang, in-wall port for connection of a CA4 multi-zone controller to four CA4-KP zone keypads and four pairs of speakers. 4 RJ-45 inputs, 4 RJ-45 keypad outputs, 4 speaker terminal pairs. Wall plate not included W x H x 1.25 D (45 x 73 x 31.8 mm) 0.3 lbs (0.1 kg) CA4-WP White USRC Universal System Remote Control The USRC Remote Control is the complete solution for all of your remote control requirements. It is designed to operate source devices and all Russound and A-BUS audio system keypads. 2 W x 7.75 H x D (5 x 19.7 x 2.9 cm) Shipping Weight 1 lb (.45 kg) USRC

23 XXSimple 23 Multi-zone A-BUS : Simple, Modular, Powerful Russound s simple multi-zone solutions are based on A-BUS technology the embodiment of simplicity. Designed for exceptional ease of use, our systems are flexible and modular. From single source systems that allow you to share music throughout your home to basic multi-source systems that provide multiple music sources in different locations, Russound offers solutions for any home. From source components to amplified keypads, an A-BUS system installs easily using CAT-5 cable. Installation, whether in new construction or an existing home, is a snap. The modular design of A-BUS components makes future system expansion painless. Add additional A-BUS hubs or controllers to increase the number of system zones.

24 24 Russound Resource Guide 2015: Simple Multi-zone: A-BUS Simple A-BUS Systems A-H484 4 Source/4 Zone Surface Mount Hub 4 pairs of gold plated audio RCA jacks, 4 routed IR emitter jacks, common IR jack, 8 RJ-45 keypad connectors, 12V trigger output, 2 power supply jacks. Requires A-PS power supply (Sold separately). 6.5 W x 5 H x 1.5 D (165 x 127 x 38 mm) 2.25 lbs (1.0 kg) A-H484 A-M440 Decora Style 4 Source/4 Zone Kit with Remote Control Includes: 4 Source 4 Zone Surface Mount Hub Dual IR Emitter (A-H484) Power Supply (A-PS) 4 Amplified Keypads (A-K4) Wall plates not included Learning Remote (USRC) 6.39 lbs (2.9 kg) A-M A-M440-EU/UK A-H4 1 Source/4 Zone Surface Mount Hub Gold plated audio input/output RCA jacks, 4 IR emitter jacks, 4 RJ-45 keypad connectors, RJ-45 IR link input and output, IR confirmation LED. Requires A-PS power supply (Sold separately). 6.5 W x 3 H x D (165 x 76 x 32 mm) 9 oz (255 g) A-H4 A-S440 1 Source/4 Zone Kit with Remote Control Includes: Surface Mount Hub (A-H4) Dual IR Emitter 4 Amplified Keypads (A-K4) Power Supply (A-PS) Learning Remote (USRC) Wall plates not included 4.7 lbs (2.13 kg) A-S A-S440-EU/UK A-H4D In-Wall 1 Source/4 Zone Hub Fits in a standard double gang work box. Gold plated audio input and output RCA jacks, 4 IR emitter jacks, 110 punch-down terminals, 24 VDC power and 12 VDC status jacks. Requires A-PS power supply (Sold separately). Wall plate not included W x H x D (9.2 x 10.5 x 4.8 cm) 5 oz (.14kg) A-H4D White/Almond See pg 48 for more colors A-D440 Decora Style 1 Source/4 Zone Kit with Remote Control Includes: In-wall Hub (A-H4D) 4 Amplified Keypads (A-K4) Learning Remote (USRC) Dual IR Emitter Power Supply (A-PS) Wall plates not included 5 lbs (2.27 kg) A-D A-D440-EU/UK A-H2 1 Source/2 Zone Surface Mount Hub Gold plated audio input RCA jacks, 4 IR emitter jacks, 2 RJ-45 keypad connectors, 1 Expansion input, IR confirmation LED. Requires A-PS power supply (Sold separately). 6.5 W x 2 H x 1.5 D (165 x 51 x 38 mm) 7 oz (198 g) A-H2

25 Russound Resource Guide 2015: Simple Multi-zone: A-BUS 25 A-BUS Components A-K4 Amplified Keypad Analog amp, IR receiver, preamp outputs, left and right gain controls with RJ-45 connector. Wall plate not included W x H x 1.75 D (45 x 73 x 45mm) Shipping Weight 0.4 lb (0.18 kg) A-K4 White A-K4 4 Conversion Kits Contains 4 Decora inserts with buttons. 0.10lbs (45g) A-K4 4 Lt. Almond A-K4 4 Black A-LC3 Local Source Input IR emitter for local source control, auto sensing to override audio, wires in line with CAT-5 between hub or controller and keypad. Wall plate not included W x H x 1.75 D (45 x 73 x 45mm) Shipping Weight 0.4 lb (0.18 kg) A-LC3 White See pg 48 for more colors BTA-2 A-BUS Bluetooth Module Wires in line with CAT-5 between hub or controller and keypad. The A-BUS Bluetooth receiver streams content to the local A-BUS keypad. High quality aptx audio codec. Works with A-K4 and A-K6L. Wall plate not included W x H x 1.75 D (45 x 73 x 45mm) 0.4 lbs (0.18 kg) BTA-2 USRC Universal System Remote Control A-LRC2 Learning Remote Control A-PS Power Supply The USRC Remote Control is the complete solution for all of your remote control requirements. It is designed to operate source devices and all Russound and A-BUS audio system keypads. 2 W x 7.75 H x D (5 x 19.7 x 2.9 cm) 1 lb (.45 kg) USRC Features source selection and control for up to seven devices and A-BUS system keypads. Pre-programmed with most major brands of audio and video equipment, can learn IR commands. 2 W x 8.25 H x 1 D (5 x 21 X 2.54cm) 1 lb (.45 kg) A-LRC2 24 Volt DC. Features auto-sensing 110/220 voltage, detachable power cord, and compact size. 6.5 W x 2.75 H x 3.75 D (165.5 x 70 x 95.5 mm) 1.25 lbs (0.57 kg) A-PS A-PS-EU A-PS-UK

28 28 Amplifiers Amplifiers With Features for the Custom Installer Audio amplifiers are the muscle behind every home music system. Russound puts great pride and effort into building stereo and multi-room amplifiers that supply years of problem-free service. Russound engineers embarked on designing our amplifiers to meet the demands of multi-room audio systems: seamless integration, bulletproof reliability and astonishing fidelity. Built to complement an extensive array of audio systems, these versatile products deliver outstanding performance under the most demanding conditions.

29 Russound Resource Guide 2015: Amplifiers: Professional Multi-Channel Amplifiers 29 Professional Multi-Channel Amplifiers D1650 Sixteen-Channel Digital Amplifier High efficiency, cool running digital amplification Bridgeable: 160W Global bus input, independent inputs per zone Trim level adjustment per channel Global trigger input/output Independent trigger input/output per zone Audio sensing per zone Auto-switching delay settings per zone Rackmountable W (with rack ears) x D x H (45.6 x 42.7 x 9.9 cm) 28.8 lbs (13.1 kg) D D1650i D850 Eight-Channel Digital Amplifier High efficiency, cool running digital amplification Bridgeable: 160W Global bus input, independent inputs per zone Trim level adjustment per channel Global trigger input/output Independent trigger input/output per zone Audio sensing per zone Auto-switching delay settings per zone Rackmountable W (with rack ears) x D x H (45.6 x 42.7 x 9.9 cm) 24.6 lbs (11.2 kg) D D850i Professional Two-Channel Amplifiers D250LS 2-Channel Digital Amplifier Auto-sensing enables localized speaker override for a connected peripheral, such as a TV or PC. Rated 50W/channel RMS at 8 ohms or 75W/channel RMS at 4 ohms. The bridgeable power setting combines channel power for 125W into a single 8-ohm load, 1U 1/2 rack chassis has three mounting options (included). 8.5 W x 10.5 D x 1.75 H (215.9 x x 44.5 mm) 10 lbs (4.5 kg) D250LS D250LS-EU/UK R290DS 2-Channel Dual Source Amplifier 90W amplifier with auto-source switching. Primary and secondary audio inputs, loop output, selectable speaker level input, and 12V trigger input and output. Rated at 90W/ channel into 8 ohms, 110W into 4 ohms, and bridgeable to 250W of power into a single 8 ohm load. Rack ears included. 17 W x 14 D x H (430 x 355 x 105 mm) lbs (11.02 kg) R290DS R290DS-EU/UK

30 30 Russound Resource Guide 2015: Amplifiers: Integrated Two-Channel Amplifiers System Amplifiers with Front Panel Controls P125 Two-Channel, 125W, Dual Source Amplifier High-current, high-power output Auto-switching dual source inputs A/B speaker pair selection from front panel Bridgeable: 250W Advanced thermal and short circuit protection Front panel volume and balance controls Auto turn-on via signal sensing or 12V trigger 12V trigger output Not available to countries requiring CE certification W x D x 3.5 H (41.9 x 20.3 x 6.4 cm) 31.4 lbs (14.24 kg) P125 P75 Two-Channel, 75W, Dual Source Amplifier High-current, high-power output Auto-switching dual source inputs A/B speaker pair selection from front panel Rear panel unswitched AC outlet Bridgeable: 160W Advanced thermal and short circuit protection Front panel volume and balance controls Not available to countries requiring CE certification. 110V Only W x 8 D x 2.5 H (41.9 x 20.3 x 6.4 cm) 11 lbs (5.22 kg) P75 TV Amplifiers TVA2.1 Digital Two-Channel TV Amplifier with IR learning and Sub Out Designed expressly for integrating with flat panel televisions, the TVA2.1 delivers smooth, robust sound for an enhanced viewing experience. On-board IR learning allows its volume to be seamlessly controlled by the TV or cable box s remote control. 35W/ch for enhanced TV audio Easily mounts behind TVs or in structured wiring cans 24-bit/96kHz S/PDIF; optical and analog line-level inputs Includes SLM-1 Slim Surface Mount IR Receiver IR learning for use with virtually any remote control Integrated Subwoofer output W x 1.2 D x 5.75 H (25 x 3 x 14.6 cm) 1.8 lbs (0.8 kg) TVA2.1

31 Russound Resource Guide 2015: Amplifiers: Amplifier Wiring Diagrams 31 Amplifier Wiring Diagrams Zone-specific controller expansion Using Bus input to share a source with multiple zones NOTE: Special wiring required when using Volume Controls with Impedance Matching. Log in to the Russound Tech Portal at russound.com for Tech Tips. How to wire an autosensing amp to share TV speakers with a multi-zone system

32 32 Speakers Purpose-built speakers that offer designer aesthetics. The new Acclaim Speakers feature distinct designer-inspired, edgeless, easy-to-install magnetic grilles and significant acoustic refinements. The line s purposebuilt philosophy ensures there is an optimum performing speaker for any application and round and square grille options ensure they blend into any décor. All models offer Russound s timesaving three-dog design, allowing for quick and efficient installation, as well as a Limited Lifetime Warranty. NeoDrive TECHNOLOGY Hey! What happened to the magnet? Introducing the proprietary NeoDrive ultra-light, compact driver design. Ultra-powerful neodymium magnet structure enables CI s to fit speakers in tight spaces without compromising sound quality.

33 Russound Resource Guide 2015: Speakers: Acclaim Edgeless Speakers 33 Acclaim Edgeless In-Ceiling/In-Wall Speakers Performance series Great sound for a variety of applications RSF Coaxial Speaker 6.5 polypropylene woofer with NBR surround ¾ Ferrofluid-cooled, PEI dome tweeter Frequency range: 50Hz- 20kHz Sensitivity: 88 db Recommended Power: 5W-80W RSA Directional Speaker Drivers angled 15º 6.5 polypropylene woofer with NBR surround ¾ Ferrofluid-cooled, pivoting PEI dome tweeter Frequency range: 50Hz- 20kHz Sensitivity: 88 db Recommended Power: 5W-80W NeoDrive TECHNOLOGY RSF-610T Single Point Stereo Speaker 6.5 Injection-molded polypropylene/carbon-fiber woofer with NBR surround Twin ¾ ferrofluid-cooled, silk dome tweeters Frequency range: 40Hz- 20kHz Sensitivity: 90 db Recommended Power: 10W-120W Total 7.0 lbs (3.2 kg) RSF lbs (1.2 kg) RSA lbs (2.3 kg) RSF-610T High resolution series superior sound for critical listening applications RSF Coaxial Speaker 6.5 polypropylene woofer with NBR surround 1 Ferrofluid-cooled, silk dome tweeter Frequency range: 50Hz- 20kHz Sensitivity: 90 db Higher power handling: 10W-100W 7.0 lbs (3.2 kg) RSF-620 RSA Directional Speaker Drivers angled 15º 6.5 Injection-molded polypropylene/mica woofer with NBR surround ¾ Ferrofluid-cooled, silk dome tweeter Frequency range: 45Hz- 20kHz Sensitivity: 88 db Higher power handling: 10W-100W 2.6 lbs (1.2 kg) RSA-635 NeoDrive TECHNOLOGY RSF-635 Shallow Depth Speaker Shallow depth: 2.72 (6.9 cm) 6.5 Injection-molded polypropylene/mica woofer with NBR surround ¾ Ferrofluid-cooled, silk dome tweeter Frequency range: 45Hz- 20kHz Sensitivity: 88 db Higher power handling: 10W-100W 8.1 lbs (3.7 kg) RSF-635 NeoDrive TECHNOLOGY RSF Coaxial Speaker 8 poly woofer with NBR surround ¾ Ferrofluid-cooled, silk dome tweeter Frequency range: 35Hz- 20kHz Sensitivity: 90 db Higher power handling: 10W-100W 8.6 lbs (3.9 kg) RSF-820 RSA Directional Speaker Drivers angled 15º 8 Injection-molded poly/ mica woofer with NBR surround ¾ Ferrofluid-cooled, silk dome tweeter Frequency range: 45Hz- 20kHz Sensitivity: 89 db Higher power handling: 10W-100W 3.0 lbs (1.4 kg) RSA-835 NeoDrive TECHNOLOGY RSG-R Round Grille For replacements or for preorder for custom painting 0.5 lbs (0.2 kg) RSG-6R RSG-8R 8 Sold individually RSG-S Square Grille Allows an easy change to the speaker appearance to match any decor 0.5 lbs (0.2 kg) RSG-6S RSG-8S 8 Sold individually

34 34 Russound Resource Guide 2015: Speakers: Acclaim Edgeless Speakers Acclaim Edgeless Speaker Chart Model Type Woofer Tweeter Power Freq. Resp. Sensitivity Cut-out Dims Mounting Depth RSA-615 (each) Performance Series Angled 6.5 (16.51 cm) Polypropylene cone w/ NBR surround 3/4 (1.9 cm) Ferrofluid cooled pivoting PEI dome 5-80 W 50Hz - 20kHz 88dB (21.27 cm) 3.7 (9.4 cm) RSA-635 (each) High Resolution Series Angled 6.5 (16.51 cm) IMPP/mica cone w/ NBR surround 3/4 (1.9 cm) Ferrofluid cooled pivoting silk dome W 45Hz - 20kHz 88dB (21.27 cm) 3.7 (9.4 cm) RSA-835 (each) High Resolution Series Angled 8 (20.32 cm) IMPP/mica cone w/ NBR surround 3/4 (1.9 cm) Ferrofluid cooled pivoting silk dome W 45Hz - 20kHz 89dB dia. (25 cm) 3.78 (9.7 cm) RSF-610 (pair) Performance Series 6.5 (16.51 cm) Polypropylene cone w/ NBR surround 3/4 (1.9 cm) Ferrofluid cooled pivoting PEI dome 5-80 W 50Hz - 20kHz 88dB (21.27 cm) 3.49 (8.9 cm) RSF-620 (pair) High Resolution Series 6.5 (16.51 cm) Polypropylene cone w/ NBR surround 1 (2.54 cm) Ferrofluid cooled pivoting silk dome W 50Hz - 20kHz 90dB (21.27 cm) 3.49 (8.9 cm) RSF-820 (pair) High Resolution Series 8 (20.32 cm) Polypropylene cone w/ NBR surround 3/4 (1.9 cm) Ferrofluid cooled pivoting silk dome W 35Hz - 20kHz 90dB dia. (25 cm) 3.98 (10.1 cm) RSF-635 (pair) High Resolution Shallow Depth 6.5 (16.51 cm) IMPP/mica cone w/ NBR surround 3/4 (1.9 cm) Ferrofluid cooled pivoting silk dome W 45Hz - 20kHz 88dB (21.27 cm) 2.72 (6.9 cm) RSF-610T (each) Single-Point Stereo 6.5 (16.51 cm) IMPP/carbon fiber cone w/ NBR surround Twin 3/4 (1.9 cm) Ferrofluid cooled pivoting silk dome W (total) 40Hz - 20kHz 90dB (21.27 cm) 3.69 (9.4 cm)

35 Russound Resource Guide 2015: Speakers: OutBack Outdoor Speakers 35 OutBack Outdoor Speakers 8 OutBack Rock Speakers 5R82 2-Way Rock Speakers Designed to provide high quality audio in even the harshest of climates while disappearing into the landscape. Includes 3 of burial-rated wire and an integrated security loop for anchoring in place. 14 x 12 x 11 D (35.6 x 30.5 x 27.9 cm) Shipping Weight 11 lbs (4.95 kg) R82-G Gray Granite R82-S Sandstone R82-W Weathered Granite Sold individually Gray Granite Sandstone Weathered Granite 5 Series OutBack Outdoors The 5 Series OutBack outdoor speakers are designed to provide high quality audio indoors and out, even in the harshest of climates. Each speaker comes with a versatile bracket that allows for flat mounting, corner mounting, or pole mounting. Also included is a stylish pedestal foot that offers an elegant bookshelf mounting option. Available in black or white. Paintable. Mounting options for the OutBacks include bookshelf foot, pole, flat or corner surface. All options included. 5B Way 5B Way 5B Way 5B65S 6.5 Single Point Stereo 9.5 x 6.25 x 6.25 D (24.13 x x cm) 10.5 lbs. (4.8 kg) White 5B Black 5B45 Sold in pairs x 7.5 x 7.5 D (28.57 x x cm) 14.8 lbs. (6.7 kg) White 5B Black 5B55 Sold in pairs 13 x 8.75 x 8.25 D (33.02 x x cm) 19.4 lbs (8.8 kg) White 5B Black 5B65 Sold in pairs 13 x 8.75 x 8.25 D (33.02 x x cm) 10.4 lbs (4.7 kg) White 5B65S Black 5B65S Sold individually FBC1-FR Fire-Rated In-Ceiling Flexbox Speaker Back Box Flexbox speaker back boxes reduce background noise, provide a moisture barrier, diffuse distortion and improve sound quality. The flexible construction allows for easy installation in retrofit or new construction settings. Flexboxes are flame retardant and meet ASTM E119 and UL 263/ NFPA 251 (1-hour) and ASTM E84/NFPA 70 standards. In-Ceiling Rough-In Speaker Brackets 1 (25 mm) nominal thickness, proprietary composite STC Rating: 32, Flame Spread: 23 Smoke Density: 30 (ASTM E84/ NFPA 70) Thermal Value: R º F to 350º F (-40º C to 177º C) Fire Rating: CLASS 1 Fire Rated ASTM E119 /NFPA 251 and UL 263 for 1 Hour Fire Rating Sold individually For all Russound 6.5" Speakers. 1.2lbs (0.54kg) SB-C67 6 For all Russound 8" Speakers. 1.4lbs (0.64kg) SB-C W x 6 D x 17.5 H (355 x 152 x 445 mm) Weight: 6.7 lbs (3 kg) FBC1-FR

36 36 Connectivity & Control About Connectivity & Control Connectivity and Control is all about getting the signal from one place to another, be it a line level, speaker level or even Infrared. Russound s heritage is in speaker selectors and volume controls and ours are still the best in the business. We now offer infrared and wireless solutions designed specifically for the need of custom installers. X1 Wireless: The Russound X1 Custom Wireless Audio Platform is designed to expand your multi-room audio system ideal for distributed audio systems, rear speakers for home theaters, subwoofers, and any retrofit applications where installing speaker wire is labor intensive and cost prohibitive. Speaker Selectors: Speaker selectors are an efficient, cost-effective means of expanding an audio system. Russound has a wide variety of speaker selectors for most applications. Russound uses only the finest components in our speaker selectors to ensure the greatest amount of protection, sound quality and reliability. Volume Controls: All Russound volume controls feature a superior autoformer design with impedance matching to provide excellent frequency response and maximum power transfer. With our volume controls, you get the highest possible performance, reliability and longevity. Infrared: We view all our products as integral parts of the overall system. Therefore, all Russound IR products are installed with simple connections, engineered to integrate with a vast number of products and designed to perform with exceptional reliability.

37 Russound Resource Guide 2015: Connectivity and Control: X1 Wire Replacement System 37 X1 Wire Replacement System X1-TX8 Multi-channel Wireless Transmitter Replaces long wire runs Four zone wireless audio transmitter Four stereo inputs (optical digital input zone 4 only) Wirelessly expand your audio system Connect any number of X1-RX2 or X1-RX220 wireless receivers W x 1.5 H x 3.5 D (130 x 38 x 89 mm) 1.8 lbs (0.8 kg) X1-TX8 X1-RX2 Wireless Receiver Combines with the TX8 to wirelessly receive digital audio signals Digital connections maintain audio signal integrity and increase overall performance Use with powered subwoofers or remote amplifiers to expand your system W x 1.25 H x 3.5 D (130 x 32 x 89 mm) 2.0 lbs (0.9 kg) X1-RX2 X1-RX220 Wireless Receiver Amplifier Wireless amplifier receiver for remote locations Combine with the TX8, to eliminate long speaker runs Adds ample power for each room of audio Stereo gains Internal 20W/channel RMS amplifier W x 1.25 H x 4.75 D (130 x 32 x 121 mm) 2.6 lbs (1.18