lcd display digitizer made in china

If your phone has image display issues, an unresponsive touch screen or physical cracks or scratches on the glass, this LCD and touch screen assembly is what you need

1. Every single digitizer assembly we shipped was strictly checked in good condition before shipping, so please be sure to check carefully after receiving it. If there is any damage, please contact us within 3 days.

3. For those digitizer assemblies HAVE BEEN INSTALLED AND CAUSED DAMAGE on appearance or labels, they are outside the scope of warranty, returning is not supported, please be kindly understood.

LCD Screen and Digitizer Assembly + Frame with Small Parts (Made by China Manufacturer, 380-450cd/m2 Brightness) (without Logo) for iPhone 6s 4.7-inch - Black

Got broken Touchscreen display digitizer in your China Mobiles JN269? Buy Touch Screen for China Mobiles JN269 - Black and replace the broken, cracked or scratched screen in your handset. 100% Perfect fit with high manufacturing quality. The replacement touch screen display for China Mobiles JN269 comes with manufacturing defect warranty and the shipping is done in secured packing to make sure you get the product in perfect shape.

Replacing touch screen digitizer for China Mobiles JN269 is a technical task. Please make sure you are capable of replacing this part before you buy it.

This part is used to repair faulty upper touch screen digitizer only. Means you can use this part if you can see the entire display clearly & only the upper touch glass is cracked / broken / damaged / not working.

We mainly provide iPhone, iPad, Samsung, etc famous brand parts, covering the LCD displays, touch screen digitizers, glass lenses, back cover, flex cable, vibrator, speaker, back and front cameras, accessories, etc.

“Original” screens are those containing LCDs manufactured for Apple. “Copy” screens are compatible replacements entirely designed and manufactured by third-party companies not associated with Apple.

LCD display panel can have poorer resolution (i.e. looks “coarser”), worse brightness, contrast and vibrancy and reduced refresh rate amongst other problems.

Originals are those screens containing LCDs that were manufactured for Apple. So-called “copy” screens are compatible replacements, but designed and manufactured entirely independently by third-party companies, typically in China.

When you’ve spent- directly or indirectly- several hundred pounds for an iPhone with a Retina display, it doesn’t make sense to replace it with a lower-quality screen that can make a £400 phone look like a £40 one! Not only that, but you’re likely to have fewer issues, and a longer-lasting screen.

Many- if not most- don’t even acknowledge the existence of copy screens, let alone explain the difference to the customer. Hardly in their interest to do so if they only fit cheap, low-quality copies. Some of them can hardly be blamed- they know so little, they’re not even clear on the differences between OEM, non-OEM and copy displays themselves! Others can be more deliberately misleading… and some outright lie.

One of the most important differences between an original and a “copy” screen is how the digitizer (touch sensor) is designed. Apple has it manufactured as part of the LCD itself, whereas the copies have it on the glass.

Although there are only a small number of manufacturers of the bare LCDs themselves, these are then bought by countless other companies who add the remaining components needed to turn these into a complete working screen. As a result, you could easily end up with an LCD from the best “copy” manufacturer, but the digitizer/touch (as part of the separately-manufactured glass) from the worst.

There are countless digitizers out there, and you can only take the supplier’s word that the quality is good. Many ship good ones at first, then switch to cheaper parts to make more profit. This is particularly bad with the iPhone 6S and 6S+, since Apple moved the chips responsible for touch processing onto the LCD itself. As a result, you’re not just getting a copy screen- you’re getting copy chips too.

That brings us to another major issue with the copies. When you drop an Apple original, the glass often breaks, but if the LCD itself is intact, you can continue to use it until it’s fixed. With the copies, the touch/digitizer is on the glass and stops working when that’s broken. Even worse, the LCD itself is more likely to break due to the thinner and more fragile glass.

One of the principal issues with "copied" phone screens and why it differs from the originals is touch and digitizer problems. And that"s a big problem since you"re going to control the device with the touchscreen anyway.

As far as we could remember, phone manufacturers build the touch panel/digitizer with the LCD itself, while the copied screen manufacturer build it separately on the surface glass. Hence, there"s a difference in touch sensitivity. Additionally, copied phone screens usually drop the high touch sampling rate, meaning your screen may not respond to your touches faster.

Here"s also another major issue with the digitizer on copied phone screens. When you crack a copied screen accidentally, the touchscreen stops working, stopping you from accessing the device until you fix it again. Meanwhile, the touch on the original phone screen works perfectly, even after undergoing severe cracking.

Besides having touch problems, most copy phone screens usually have poor display properties. That means you get lower brightness, colour accuracy, sharpness, contrast, etc. And when the display isn"t great, watching movies and viewing other content becomes boring.

It"s not all about the display quality. A copy phone screen may also affect other parts of the phone system if its specifications don"t tally with the original one. In such a case, it could drain your battery at an alarming rate, or at worse, damage your backlight.

If you happen to have a phone with an in-display fingerprint sensor, then replacing its screen with a copied one is not an option – it’s going to mess with your fingerprint accuracy.