13 pin tft lcd display 320x240 4 level grayscale made in china

NHD-320240WG-BxTGH-VZ#-3VR | Monochrome Graphic Module | 320x240 Pixels | Transflective LCD | White Backlight | STN (+) Positive Gray Display | Built-in Negative Voltage | Frame Ground

Newhaven 320x240 graphic Liquid Crystal Display module shows blue pixels on a gray background. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-320240WG-BxTGH-VZ#-3VR display includes a frame ground as well as built-in negative voltage. It has an optimal view of 6:00, operates at 3.3V supply voltage and is RoHS compliant.

Adjust the length, position, and pinout of your cables or add additional connectors. Get a cable solution that’s precisely designed to make your connections streamlined and secure.

Easily modify any connectors on your display to meet your application’s requirements. Our engineers are able to perform soldering for pin headers, boxed headers, right angle headers, and any other connectors your display may require.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Choose from a wide selection of changes including shape, size, pinout, and component layout of your PCB to make it a perfect fit for your application.

ER-OLED0383-1W is the graphic OLED display panel made of 320x132 individual white OLED pixels,16-level grayscale,diagonal is 3.83 inch.The controller ic SSD1320, communicates via 4-wire SPI serial interface,thanks to controller"s built-in voltage generation,only a single 3.3V power supply is needed. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast,extremely wide viewing angle and extremely operating temperature.The fpc is the connector type,we offer optional zif connector(fpc connector).

TFTdisplays moduleare liquid-crystal display panel with thin-film transistor technology, bonding with IC driver, backlight unit, and flex cable, sometimes assemble control board with difference interface. TFT display is active display with high contrast than monochrome lcd, TheTFTdisplay technology could offers full RGB display in wide range display colors and tunes, high display resolution. We could get rich colors, detailed images, clear and bright graphics display from a tft lcd module.

Maclight provide wide range tft lcd display module from small sizes to medium sizes. Our small tft lcd sizes( diagonal size of tft active area) have 0.9” tft lcd, 1.8” tft lcd, 2.2” tft lcd, 2.4”tft lcd, 2.8” tft lcd display module, 3.2” tft lcd, 3.5” tft lcd module, 4.3” tft display module, 5” tft lcd, 5.6” tft display, 5.7 inch tft, 7” tft lcd, medium sizes tft module such as 8” tft lcd, 9” tft, 10.1” tft lcd display module, 12.1” tft lcd, and so on. Our wide range standard tft lcd module could meet the most of application for industrial, medical, automotive application. Such as industrial control system, coffee machine, medical equipment, POS system, GPS navigator, white goods, kitchen display, cooking machine, energy control display, IOT, and etc.

Maclighttft lcd module including standard tft-lcd modules, wide viewing angle IPS tft lcd, sunlight readable tft lcd display with high brightness tft and transflective tft lcd, reflective tft, Wide temperature tft lcd, bar type tft lcd, and smart tft lcd module with serial interface for industrial display application. Resistive touch panel and projected capacitive touch screen (PCAP) with tft lcd, in landscape or portrait type. Beside color tft display, we have monochrome tft lcd with high transmissive ratio and power saving for special application such as 3D printer mask screen.

Our tft lcd module have variety interface including MCU, RGB,TTL, LVDS, MIPI DSI, serial SPI, I2C interface. The tft lcd display resolution from such as 80x160 pixels, QVGA 240X320, HVGA 320X480, VGA 640X480 tft lcd display module, and high resolution such 1024X600, 1024X768, 1280X800, FHD 1920X1080 resolution.

While in theory an Arduino can run any LCD, we believe that some LCDs are particularly suited to being an Arduino LCD display. We"ve currated this list of LCD displays that will make any Arduino-based project shine.

First is the interface. All of these displays support SPI. Builders often ask themselves (or us) "which interface uses the fewest GPIO pins? AND is that interface fast enough to update the screen at an acceptable rate for my application?" When using the relatively small procesor of the Arduino, SPI is usually the best interface because it takes few wires (either 3 or 4) however it does limit the overall size (number of pixels) that can be quickly controlled. I2C is another choice of interface to leave GPIOs open. We tend to recommend SPI over I2C for Arduino displays because SPI is quicker and better at handling more complex data transfer, like pulling image data from an SD card.

Which brings us to the second factor in choosing an Arduino display: the number of pixels. We typically recommend a display with a resolution of 320x240 or less for use with Arduino. Take for example a 320x240 24-bit display. Such a display takes 230,400 bytes *(8 + 2) = 2,304,000 bits for a single frame. Divide that by 8,000,000 (Arduino SPI speed of 8MHZ) = 0.288 seconds per frame or 3.5 frames per second. 3.5 fps is fast enough for many applications, but is not particularly quick. Using fewer bits-per-pixel or a display with fewer pixels will result in higher frame rates. Use the calculator below to calculate the frame rate for a display using SPI with an Arduino.

Third, we want to recommend displays that are easy to connect to an Arduino. Each of these displays has a ZIF tail or easily solderable throughholes, so no fine pitch soldering is needed. These displays can either be brought up on the CFA10102 generic breakout board, or with a custom CFA breakout board.

Most character displays can be run via Parallel connection to an Arduino. You"ll want to make sure you can supply enough current to operate the backlight.