set custom lcd panel text on poweredge r720 pricelist

I recently bought a pair of these servers to take over VMware duties from a pair of HP ProLiant DL380 G5 servers. Having had a few bad Dell experiences years ago I had stopped buying PowerEdge machines as I considered their design to be inferior (think PE1850) but I’m pleasantly surprised by these R710 machines.

In the server’s own BIOS options there is a Custom LCD field but entering text here and restarting doesn’t change the panel – it still just shows the Service Tag. Strangely, the iDRAC BIOS doesn’t offer you any control here at all, it just lists what the custom string currently is.

To make matters worse, I had accidentally got the desired result on one of the servers, but couldn’t get the second one configured. The answer lies with the buttons next to the LCD. Though you can view IP settings, temperature, power usage, etc., there is also a Setup option. With 48GB of RAM, each POST of the machine takes about 5 minutes so I had been too cautious to mess about with these options in case I undid some of my initial iDRAC config. I assumed that they would only provide a subset of the BIOS options. Wrong! You needto use the panel – even the iDRAC WebUI doesn’t seem to configure the LCD screen.

I haven"t found a complete reference of Dell"s proprietary IPMI commands, but according to the documentation I found here, the first invocation of ipmitool puts the supplied string into one of the display"s registers, and the second one flips the display buffer to actually show this.

You can change it in BIOS Setup F2 by going to Embedded Server Management and setting Front-Panel LCD Options to User-Defined String, then goin gto User-Defined LCD String to set the string.

You can also change it from the OS using OMSA (OpenManage Server Administrator by going to System, Main System Chassis, Front Panel (sub tab), and set LCD Line to Custom.

On Dell hardware, you have the option of configuring the Forge Appliance LCD, a small readout on the computer’s front panel. Use these steps to configure the LCD display for Forge:

Press Esc > Esc > Esc to exit the iDRAC Settings page and the System Setup Main Menu, then continue with instructions in Section 6.0, Installing Other Components Required by Forge.

The various LCD Panel blocks are a great way to add a human touch to a ship or base by displaying useful images or text. For LCD configuration and usage, see LCD Surface Options.

Note: Some functional blocks, such as Cockpits, Programmable Blocks, Custom Turret Controllers, and Button Panels, have customizable LCD surfaces built in that work the same way as LCD Panel blocks, which are also discussed in detail under LCD Surface Options.

LCD Panels need to be built on a powered grid to work. Without power, they display an "Offline" text. While powered without having a text, image, or script set up, they display "Online".

LCD Panel blocks come in a variety of sizes from tiny to huge (see list below) and are available for large and small grid sizes. Note that LCD Panel blocks all have connections on their backs, and very few also on a second side.

All LCD Panels and LCD surfaces work with the same principle: They are capable of displaying dynamic scripts, or few inbuilt static images accompanied by editable text. Access the ship"s Control Panel Screen to configure LCD Panels or LCD surfaces; or face the LCD Panel block and press "K".

A Text Panel, despite its name, can also display images. On large grid, it is rectangular and does not fully cover the side of a 1x1x1 block. On small grid it is 1x1x1, the smallest possible LCD block in game.

On large grid, you choose the Text Panel when you need something that has rectangular dimensions that make it look like a wall-mounted TV or computer screen. If you want to display images, this one works best with the built-in posters whose names end in "H" or "V" (for horizontal or vertical rotation). On Small grid, you place these tiny display surfaces so you can see them well while seated in a cockpit or control seat, to create a custom display array of flight and status information around you.

Corner LCDs are much smaller display panels that typically hold a few lines of text. They don"t cover the block you place them on and are best suited as signage for doors, passages, or containers. They are less suitable for displaying images, even though it"s possible. If you enable the "Keep aspect ratio" option, the image will take up less than a third of the available space.

These huge Sci-Fi LCD Panels come in sizes of 5x5, 5x3, and 3x3 blocks, and can be built on large grids only. These panels are only available to build if you purchase the "Sparks of the Future" pack DLC.

They work the same as all other LCD Panels, the only difference is that they are very large. In the scenario that comes with the free "Sparks of the Future" update, they are used prominently as advertisement boards on an asteroid station.

This LCD panel can be built on large and small grids. The transparent LCD is basically a 1x1x1 framed window that displays images and text. It is part of the paid "Decorative Blocks Pack #2" DLC.

What is special about them is that if you set the background color to black, this panel becomes a transparent window with a built-in display. In contrast to other LCD Panels it has no solid backside, which makes it ideal to construct transparent cockpit HUDs, or simply as cosmetic decoration.

While configuring an LCD Panel, the GUI covers up the display in-world and you can"t see how the text or images comes out. In the UI Options, you can lower the UI Background opacity to be translucent, so you can watch what you are doing more easily.

message by issuing the command set chassis display message message fpc-slot slot number permanent. If the second line is configured to display a custom message, the Menu button and the Enter button in the LCD panel are