raspberry pi and lcd touch screen case for sale

When you want to have an easier time of connecting to different media and selecting it, a single-board computer is an efficient option. The Raspberry Pi single-board computers work with a variety of peripheral devices, including LCD display modules with touchscreens. On eBay, you can find a variety of sizes and features of affordable Raspberry Pi touch screen units to pair with the single-board computer for enjoying your favorite media.What are some features of Raspberry Pi Touch Screen modules?

Automatic power off: If the touchscreen is not used within 10 minutes, it automatically powers off. This time can be adjusted to turn off in less or more time.

Signal support: It accepts EGA, SVGA, WXGA, VGA, SXGA, and UXGA video signals from the computer.What are the sizes of Raspberry Pi touch screen modules?

The Raspberry Pi touch screen modules are available in sizes of three to seven inches when measured on the diagonal. Their frames can be set up in a vertical or horizontal orientation for viewing in a portrait or landscape setup. The stands for the touchscreens can also be angled for easier use and viewing. See the manufacturer site for details.What is the compatibility of a Raspberry Pi display module?

The following are compatibility options for a Raspberry Pi touch screen display module:USB: They can display the information that is stored on a removable USB drive plugged into the Raspberry Pi computer.

Consider the following features when you are shopping on eBay for a new or used Raspberry Pi touch screen:With computer case: Some have a case for holding both the computer and the display in one unit.

1. After mounting the display and display hat board, actually placing the whole assembly into the shell required a bit of force to get all I/O ports seated. Once in the correct position the assembly snaps into place. This needs to be clarified.

2. The display mounts upside down in the shell. The cardboard product box has a very small sticker that states this and gives instruction for how to rotate the image 180 degrees. I completely missed it, but found instruction online. I saw the sticker after the fact.

This is the OneNineDesign Touch Screen Case for the Official Raspberry Pi 7" touchscreen display and the Raspberry Pi 4 - now available in black, white, clear and red (select above).

The case houses a 7" Raspberry Pi Touch Screen Display and an attached Raspberry Pi 4(both not included), to provide you with a protective and presentable display!

Compatible with Raspberry Pi 4 only.This premium high-gloss case houses the Official 7" Raspberry Pi touchscreen LCD Display and an attached Raspberry Pi board in the rear to provide you with a protective and presentable Touchscreen LCD device. Raspberry Pi Touchscreen Display, and Raspberry Pi board are sold separately.

Make sure your kit is fully protected with a Raspberry Pi 4 display case. Designed to encase the whole screen, it wraps around your Raspberry Pi effortlessly, offering protection whether you’re traveling or setting up away from home. Making the whole unit completely portable, why not take a look at what makes the Pi 4 screen case a must-have item.

Raspberry Pi OS provides touchscreen drivers with support for ten-finger touch and an on-screen keyboard, giving you full functionality without the need to connect a keyboard or mouse.

The 800 x 480 display connects to Raspberry Pi via an adapter board that handles power and signal conversion. Only two connections to your Raspberry Pi are required: power from the GPIO port, and a ribbon cable that connects to the DSI port on all Raspberry Pi computers except for the Raspberry Pi Zero line.

All orders are processedwithin 24 hoursafter they are placed. Usually, we are able to ship orders the next day. Weekend orders are shipped on the following Monday. You will receive a shipping confirmation email from our system when the shipping information has been uploaded.

Generally, we will ship the orders with Free Shipping, without the minimum order amount requirement. You may check if the free shipping method is available to your country in the Delivery Area below.

Austria, Belgium, Czechia, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Lithuania, Luxembourg, Monaco, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom, etc.

As soon as your order is packed and shipped, you"ll receive a shipping confirmation email. You will then be able to track your order through the tracking link on the email. If you haven"t received an email yet, please reach out to us atservice@sunfounder.com, our sales staff will contact you ASAP.

* Delivery Time - These are the delivery estimates provided by our shipping partners and apply from point of dispatch, not from point of sale. Once your parcel leaves our warehouse, we cannot control any delays after that point.

If Customs Duty is payable to your territory, you"ll be responsible for paying it to the authorities, so SunFounder isn"t involved in this process. Whether Customs Duty is payable, and by how much, depends on a whole lot of different things. For example, many countries have a "low value threshold" below which they do not charge any Customs Duty.

If you do have to pay Customs Duty though, the amount payable is usually calculated based on the value of the goods and the type of goods being imported.

If, for whatever reason, you refuse the customs fee and the parcel is returned back to us. If you"re still unsure on whether you"ll be subject to customs fees, we recommend contacting your local customs office for more info before placing your order!

Please create account/login through {{ customer_email }} email[{"id":39281735467080,"title":"7\" 1024 x 600","option1":"7\" 1024 x 600","option2":null,"option3":null,"sku":"7B06","requires_shipping":true,"taxable":false,"featured_image":{"id":28737707278408,"product_id":6547379159112,"position":1,"created_at":"2022-04-28T13:04:11+08:00","updated_at":"2022-04-28T13:04:11+08:00","alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 7\" 1024 x 600 ","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-7-1024-x-600-818659.jpg?v=1651122251","variant_ids":[39281735467080]},"available":true,"name":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT - 7\" 1024 x 600","public_title":"7\" 1024 x 600","options":["7\" 1024 x 600"],"price":9999,"weight":726,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 7\" 1024 x 600 ","id":21048213471304,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-7-1024-x-600-818659.jpg?v=1651122251"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39377596186696,"title":"10\" 1280 x 800","option1":"10\" 1280 x 800","option2":null,"option3":null,"sku":"101B08","requires_shipping":true,"taxable":false,"featured_image":{"id":28737697284168,"product_id":6547379159112,"position":2,"created_at":"2022-04-28T12:56:04+08:00","updated_at":"2022-04-28T12:56:04+08:00","alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 10\" 1280 x 800 ","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-10-1280-x-800-247748.jpg?v=1651121764","variant_ids":[39377596186696,39377596219464,39377596252232]},"available":true,"name":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT - 10\" 1280 x 800","public_title":"10\" 1280 x 800","options":["10\" 1280 x 800"],"price":15999,"weight":726,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 10\" 1280 x 800 ","id":21048203411528,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-10-1280-x-800-247748.jpg?v=1651121764"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39377596219464,"title":"10\" 1366 x 768","option1":"10\" 1366 x 768","option2":null,"option3":null,"sku":"101B06","requires_shipping":true,"taxable":false,"featured_image":{"id":28737697284168,"product_id":6547379159112,"position":2,"created_at":"2022-04-28T12:56:04+08:00","updated_at":"2022-04-28T12:56:04+08:00","alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 10\" 1280 x 800 ","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-10-1280-x-800-247748.jpg?v=1651121764","variant_ids":[39377596186696,39377596219464,39377596252232]},"available":true,"name":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT - 10\" 1366 x 768","public_title":"10\" 1366 x 768","options":["10\" 1366 x 768"],"price":15999,"weight":726,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 10\" 1280 x 800 ","id":21048203411528,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-10-1280-x-800-247748.jpg?v=1651121764"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39377596252232,"title":"10\" 1920 x 1200","option1":"10\" 1920 x 1200","option2":null,"option3":null,"sku":"101B07","requires_shipping":true,"taxable":false,"featured_image":{"id":28737697284168,"product_id":6547379159112,"position":2,"created_at":"2022-04-28T12:56:04+08:00","updated_at":"2022-04-28T12:56:04+08:00","alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 10\" 1280 x 800 ","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-10-1280-x-800-247748.jpg?v=1651121764","variant_ids":[39377596186696,39377596219464,39377596252232]},"available":true,"name":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT - 10\" 1920 x 1200","public_title":"10\" 1920 x 1200","options":["10\" 1920 x 1200"],"price":16999,"weight":726,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"Raspberry Pi Case with Touchscreen 7 to 10 inches | UPERFECT UPERFECT 10\" 1280 x 800 ","id":21048203411528,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0039\/6387\/9494\/products\/raspberry-pi-case-with-touchscreen-7-to-10-inches-uperfect-uperfect-10-1280-x-800-247748.jpg?v=1651121764"}},"requires_selling_plan":false,"selling_plan_allocations":[]}]

I"m using it to run a lighting and irrigation system for my house. The color graphical interface allows me to use BMP images of my house and yard for control screens, and its built into an enclosure set into the wall for a slick professional look. I even put an access from the backside of the wall for wiring it without having to remove the Pi or the touchscreen.

Great responsiveness, inexpensive, can"t beat 10-finger multi touch! The python demos are really neat, too. Only gripe is that the screen isn"t oleophobic, but for the price I"ll take it!

This was easy to install and it looks good. The Touchscreen is responsive and clear, but you might want to use a stylus. The only issue i had is finding a case for it. You"ll want to get one right away, unless you have a 3D printer to make one yourself. The screen is really thin, so I didn"t want to carry it around without some protection. Overall, it"s a great touchscreen, especially for the price, and I like that it is Raspi-branded.

I purchased 5 touchscreen. Two before and three in January. Touch and display quality is superb. After two-three month of use (no rough use; handled with care), display LCD and front touchpanel (black bezel) break apart. They both are connected using a thin double sided tape. I was planning to use in industrial environment but after such issue, I dropped my plan to use it in industrial environment.

Five of two displays are not in good condition. First display"s touch-panel and display LCD was break apart after two-three month. The second among five displays had another issue. Display LCD was mounted slightly right side of the touchpanel. Once you power-up display, it is easily be seen that LCD panel was a bit off-side. The other display"s screen guard having so many scratches on them which seems mishandling.

I got a couple of these for several RPi projects that Im developing and they are working amazingly well for the application. If these fit your application needs I wouldn"t hesitate to recommend them.

This screen worked right out of the box! Touch worked great with my new pi 3! However aside how fragile the (non functional) edges are, the only real issue I see is upon shutdown of the pi... The screen goes through a series of screen washes/whiteouts and never really shuts off.. I have to pull power to get it to turn off.. I"ve even tried usb/provided jumper wires.. And both results in the same thing. Not sure if this an issue per se, but it is bothersome.. I can just turn the unit off, I need to unplug it too..

I am using Raspberry Pi 3. The display came up with no problems. I am just waiting for the Smarti Pi Touch enclosure (pre-ordered after the Kickstarter project closed) before continuing to work with it.

Basically, it "does what it says on the tin". It"s bright, relatively responsive and has acceptable color. Haven"t played much with the touch screen part of it yet, but very pleased so far!

The only question(s) that I have are regarding what sort of additional processor power is inside the screen, and whether powering it from the micro-usb connection whilst also bridged from the RPi3 is an issue (it hasn"t hurt anything, yet!).

No convenient mounting points - like a screw hole in each corner, or similar. I still haven"t figured out a good way to mount it in a non-standard box.

I WAS DISAPOINTED THAT THE UNIT DISPLAYS EVERYTHING UPSIDE DOWN. I HAD TO USE THE LCD_ROTATE=2 COMMAND IN CONFIG.TXT TO FIX IT. THE INITIAL BOOT IS STILL UPSIDE DOWN BUT I GUESS AFTER IT READ THE CONFIG.TXT, IT FLIPS. SHOULDN"T IT COME STANDARD RIGHT SIDE UP?

Hmmm, it should, and this isn"t an issue we"ve seen before. I would suggest getting in touch with our Tech Support team, they should be able to help you out.

Works like great. I also bought the case Which I love except you can not get to the SD card once it build. I use a small wireless keyboard so it nice combo. I Can Throw it in my back pack when I go to work too. This allow me more time to play with it.

With so many, phone and tablets that have hi res screens, this is disappointing. It does what it"s supposed to, but has a retro look. Non techy relatives are not impressed.

The must annoying feature is the bright white screen when it loses signal as the OS shuts down. The touch input is inconsistent as input. I was using the I2C for a device was not able to get it going on the alternate I2C, but fortunately the required clock and data are on the DSI cable ... wasted hours finding that out. An OLED display, higher res, and lower current draw would be really nice in the next version.

I forgot to check that this LCD touchscreen don"t have a case. Much better that you have a notification (e.g. recommending the user to purchase also a case) when purchasing this kind of product. But thank you for this product, I will purchase again soon.

The only minor drawback that everyone should be aware (which is to be expected, honestly) is that the display draws quite a noticeable amount of current. The SmartiPi case comes with an splitter USB cable for the power source, but if you expect to use that, be prepared with a (very) beefy power supply, else you"ll get the thunder icon on the screen all the time and a very reduced performance (Just discovered that the RPi3 reduces its own clock when power is low).

I currently power this with a separate 1.5Amp supply for the screen and a 2Amp supply for the RPi3 and everything works just nice. This totals to a whopping 3.5A, which may be overkill, but keep that in mind as a reference.

I am impressed with this screen, I also got the mating case (SmartPi Touch) and it assembled nicely. With the separate case, the included jumpers and cable are not needed. The PCB was already attached with the standoffs. The packaging was super! The screen is slightly larger than 7 inches. I measured it as 7 5/8" wide X 4 3/8 high with a diagonal measurement of 8 9/16.

Works very well, but I haven"t found reliable instructions. Internet search turns up lots of hits, mostly unreliable. Doesn"t work with the OSMC I have, and I haven"t had time to track down the problem. Didn"t find anything in the official blogs.

This official Raspberry Pi 7" touchscreens now come with the display controller already connected and mounted to the back of the display. You still need to be careful pulling forward the small black tab ends that connect a ribbon cable to the RPi.

I bought the companion enclosure as well. This Touchscreen works exactly as described. I am very pleased with the display. I ended up using a mouse anyway as the icons (while clear are very tiny) and selection areas are a bit small for fat fingers.

I connected it to a Raspberry Pi 3 B running Stretch and it seems to be working perfectly. I had been previously driving a VGA monitor from HDMI through an adapter. The RPI 7" screen started up just fine without changing or installing anything with the OS.

I connected it to a Raspberry Pi 3 B running Stretch and it seems to be working perfectly. I had been previously driving a VGA monitor from HDMI through an adapter. The RPI 7" screen started up just fine without changing or installing anything with the OS.

Based on other comments here and looking at one of these at a maker space, I bought the smartipi touch case for this; it"s strongly constructed and works great. Only issue was that I"m using this with a model 3 B+, and that takes a different door on the back than comes with the case (this is being fixed by the smartipi folks, but I don"t know the logistics of getting their new cases into Sparkfun)

It gets rid of a full sized monitor, which is great.. I gave a full system to my grandson for Christmas. After we put it together, his first question was, can I use it for home work?. All I need for it now is a Ups type battery charger for 5volts. It,s now sitting proudly on my aircraft instrument panel.

I have tried other touch screens for the Raspberry Pi. They had complicated assembly and were very difficult to get them to work. This unit was easy to install and get working, is very nice looking. I am very Happy with it.

Right out of the box it worked. Didn"t even have to do anything to the RPi (in fact, both were taken out of the box at the same time, connected, and worked on the first power up). Screen quality is good for price. Also ordered the "SmartPi Touch" case which holds everything together very nicely.

Ordered it, a Raspberry Pi 3 B+, and a power supply. (Had a mouse, keyboard, and uSD on hand.). It came a couple of days ago, and I put together yesterday. Had noticed in the documentation that there"s a micro USB power input, and a standard USB output. In the configuration where the power supply is plugged directly into the Pi and the LCD interface is powered via a USB cable plugged into one of the Pi"s USB ports to the LCD"s micro USB, the LCD won"t light up at all. When the power supply is plugged into the LCD controller board and the USB cable connects power to the Pi, I get "low voltage" warnings (yellow "lightning bold"). When I use the provided F/F jumpers, it works fine, but this will cause problems plugging in other "hats", as well as clearance problems. (In my application, separate power supplies would be a BIG PROBLEM.) BTW, I checked with two different USB cables, and got the same problems as well as when I tried an Adafruit 5.25V power supply. (I was about to try a second RPi3B+ when the original one stopped booting. Fortunately I had another that I"d been using as a "pass-around" sample at talks, and fortunately when I tried it, it still worked, so now the "dead" one will be passed around!) Also, it could prove really useful to know what size those mounting screws are in case they get lost! Ace Hardware recently opened a new store about half a mile from my house!

The screen is portable enough to take with you and the Pi will use it with no configuration change when it"s powered up. Used it to set up several Raspberry Pis in a remote lab. Touch screen is nice but bring along a keyboard if you have to do any setup work. One thing to make it better, replace the jumper wires with a ribbon cable connected to 1x5 and 2x2 pin headers.

I have a Raspberry Pi in each room of my home and they run a Kiosk interface for home automation, cameras and more. I"ve tried some cheaper ones and none have survived. (I"m hard on equipment) I haven"t managed to break one of these yet.

Got a PI3+, 7" touchscreen and SmartPI case for manufacture test. I put these together and booted the latest Raspbian. The LCD and touchscreen connect to the display connector using a short FPC cable. The display booted and the touch screen just worked out of the box. There were some nice but not well documented improvements. They provide a Y USB cable to power both the PI and the LCD. This is a cleaner solution than the jumper wires they provide.I"m not a big fan of using lego blocks in a industrial environment but the case went together easily and does a decent job of protecting the display and the PI. Some reported a inverted display issue but that seems to have been resolved.

A truly plug-and-play display for the Raspberry Pi. Does not steal any additional extension connector pins if you power it with a USB power supply and leaves the I2C1 interface available for other devices.

Big enough for somewhat squinting actual Raspberry PI development and computer work, but really shines for touch screen optimized large button control panels.

You can just install a Pi3 or 4 on the back, but with a 4 you really need some additional airflow. The SmartiPi Touch 2 enclosure works better. https://www.sparkfun.com/products/16302

It works fine, no glitches, no problems, no hair pulling moments. Once electrically connected to my RPi 3B+ it"s good to go. I run it with the "lite" version of the Raspberry Pi OS with only xorg drivers installed, no full desktop or windows manager, as part of an in-the-field project with a HQ camera attached. My only complaint is the ribbon cable could stand to be about 6 inches longer.

It works great, the colors are beautiful, and finger touch works fine. What I like most is that the Raspberry Pi GPIO pins are all still available - except for one +5v pin and one Ground pin. Both are redundant (i.e. others are available). So, this is not an issue at all. I also like that data connects to the Pi via the IPS ribbon cable. Another thing I like is that power connects to the Pi via two jumper wires. The Pi is fussy about its power supply voltage. So, the jumper wires are better because they are heavier gouge than a small PCB trace.

I connect a Pi v4 and put the whole thing in the SmartPI Touch 2 case from Sparkfun and now it looks pretty professional. Make sure you use a good power supply.

Where is the documentation? This thing is so poorly documented it"s almost a joke. The whole point of the RPi ecosystem is to enable Makers and learning about electronics, so why isn"t this fully documented?

I used this to build a portable utility/testing device for my company. It works fantastic with the SmartiPi Touch Pro Case on Amazon. The touchscreen functions great, only thing is you can"t register mousedown and mouseup events in Chromium (only click). Other than that it"s great!

I got it working the first try, easy to follow instructions. Trying to learn Kivy with Python for touch screen programming, That"s a lot more difficult.

It"s bright, clear, good color rendition. Touch input is responsive and accurate. Trivial to assemble and get going. Like the multiple power options. Would buy again.

The only drawback is that I wish there was a case I could purchase for it. I have seen 3D files for printing your own, but I do not have a 3D printer (yet).

Here you"ll find all the extra bits & bobs that are essential to complete the swag bag of any modern maker! We have a huge number of items that will help fill out your maker tool kit, satisfy your cabling requirements or even boost your connectivity and productivity.

Cases, cases, cases!! Here is our extensive range of fantastic cases and enclosures for your maker movement activities. Choose from the slick & sleek, bold & colourful or weird & wonderful. No hobby project is complete without the perfect case to complete the look and fit the application, and here you should have no problem at all in finding the enclosure that is right for you!

Here at Pi Supply, we have our roots in the open-source and educational values provided by the open source community. The Raspberry Pi is such a fantastic educational tool, and these kits open up even more possibilities for anyone to learn about electronics and programming.

We carry a large range of power supplies and power solutions which cater to any need that you might have in your maker adventures. Whether you just need a standard mains supply, to be able to make your projects portable, or something a bit more heavy duty, we"ve got you covered so you never get caught short.

Inside this part of the shop you can find all the bits and pieces you need for your prototyping needs. Here you can kit out your maker station with tools and consumables, as well as other components such as headers, sensors and accelerometers to bring all those epic ideas to life!

Here you can find the range of everyone"s favourite single board computer! The revolutionary Raspberry Pi has brought more possibilities within the grasp of developers than ever before, and here you can get your hands on the board that will bring that next idea to life. The Raspberry Pi has come to us in many shapes and sizes, but whichever model you want or need, this platform is guaranteed to pack a punch!

Take a look at all the original products we have to offer here at Pi Supply! Whether you are looking for self-solder kits or fully assembled HATs, you can explore new horizons with Pi Supply, and do even more to unlock the potential of your Raspberry Pi. Check out our range for LED & IR toys, ePaper applications, power solutions and much more to expand your range of projects.

【4 inch HD Touchscreen】800x480 pixel hardware resolution, support HDMI input and HDMI audio output, backlight brightness adjustable. Resistive touch control, convenient human-computer interaction experience. 4 inch IPS full-angle display, refresh rate up to 60FPS. Support for playing video and games, while the picture is stable and clear can be used as a monitor screen, supporting 3.5mm stereo audio output.

【Support Raspbian, Kali, Octopi and Ubuntu for Raspberry Pi 4】Compatible with the latest Raspbian Buster with desktop and Raspbian Buster Lite(Need to modify the system configuration file, please refer to the detailed description for installation). Support Kali 2019.4 version (please download kali system: https://mega.nz/#!Pex2jKQa!NRuiR0t0cwH_TnogARdhkNYJ6DBPh6UUpSdxk5NEh1w).

【Cooling System】2 layers raspberry pi 4 touchscreen case especially designed for Raspberry Pi 4 and 4 inch touch screen. Come with cooling fan and 4 pcs heat sinks (size of heatsinks for CPU: 25 x 25 mm. ), it"s better for heat dissipation.

【4inch display case for raspberry pi 4】4-inch touch screen monitor with an Acrylic case and related screw kits, you can choose to install it on a wall or stand to easily connect the monitor with Raspberry Pi or other devices.

1. For 4-inch screen display and touch, please select Raspbian, Kali, Octopi or Ubuntu (note: the system file downloaded by the current module contains detailed installation instructions)

Raspbian comes with touch drive system download: https://tinyurl.com/y55syctwKali-linux comes with touch drive system download: https://tinyurl.com/y537rh4hOctopi comes with touch drive system download: https://tinyurl.com/yyqd44aeUbuntu comes with touch drive system download: https://tinyurl.com/y5hh9uqw

3. The official Kali system does not support dual screens. Because the resolution of the small screen and the large screen of the Kali system is much different and there are many Raspberry Pi adaptation systems, they cannot be fully compatible. We only provide Kali system for 4 inch screen display and touch. Please understand!

4. Raspbian Buster Lite system modification steps(mega：https://mega.nz/#!F40XUQQK!PmhElDywV6t82CM-Esc2HCVXyYuf5TSksdJtU7u97oo). Refer to the display and touch function module files for system installation steps.

The 5" Resistive Touch Screen LCD with Bicolor case package combines the Touchscreen LCD Display module and the its case to an all in one device. Touchscreen display provided supports various systems such as Raspberry Pi, Banana Pi, Banana Pro, BeagleBone Black etc. The built in HDMI interface enables the display to work as computer monitor just like any other HDMI screen.

The display comes with preloaded Raspbian driver and Ubuntu image. The 800x480 high resolution display has seperate interfaces for touch control and display control. While the display is controlled over the HDMI interface the touch control is done via USB interface. To reduce the power consumption backlight of the display can be switched on/off as per user preference.

The case material is high quality bicolor (black and white) acrylic. The additional bottom holder that comes with the case is adjustable for a tilit of angle 45o or 60o. Mounting holes on the case are compatible in its design with that of Raspberry Pi B/A+/B+/2B and Banana Pro