kuman 7 inch capacitive touch screen tft lcd display pricelist

Kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B (7 Inch Raspberry Pi Touch Screen)

NOTE: 1.Please note Supported update Raspberry Pi 3 2 and RPi 1 Model B B+ BB BLACK supported 2.Power Supply is NOT included.for PI ,do not require power supply 3.There is a sticker on the LCD screen. Please peel off before use. Feature: LCD Size : 7.0 inch (Diagonal) Driver Element : A-Si TFT active matrix Display mode : Normally White ,Transmissive High Resolution: 1152,000 Dots (800 x 3(RGB) x 480 SSD1963 touch panel controller Dot pitch : 0.0642(W) X 0.1790(H)mm Active Area : 154.08(w)X 85.92(H Module Size : 164.9(w)X100.0(H)x5.7(D)mm Surface Treatment : Anti-glare Color arrangement : RGB-Stripe Interface: Digita Blacklight : Highlighted LED lamp backlighting TFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin"s voltage on the module Can not be more than 3.3V Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V Interface Type: 16 parallel Operating Temperature : -20 ~ +70 degrees centigrade Storage Temperature : -30 ~ +80 degrees centigrade Package includes: 7inch HDMI LCD (B) x 1 HDMI cable x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 DVD × 1 SC7B 7 inch HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems With the use of Pi Raspberry, support Raspbian、Ubuntu、Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive

● Operating voltage: 12V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.

● Support 864 x 480 x 24bit graphics content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive graphics data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.

We understand the urgent needs on geting the parts quickly to make breathing devices. We are now working hard to produce the screens, if you have any question, welcome to send us emails.

ER-TFTM070-5 is 800x480 dots 7" color tft lcd module display with RA8875 controller board,superior display quality and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 6800 8-bit,16-bit parallel,3-wire,4-wire,I2C serial spi interface.Built-in resistive touch panel controller,it"s optional for resistive touch panel,capacitive touch panel and its controller FT5206,font chip, flash chip and microsd card slot. We offer two types connection,one is pinheader and the another is ZIF connector with flat cable mounting on board by default and suggested.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for7" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.