OLED technology is particularly suitable for this as the aperture, the ratio of active to inactive area, can be sufficiently large. Passive matrix technology offers an advantage over AM OLED because it dispenses with active semiconductor components within the field of view that restrict transparency. Optical refinement can drastically reduce reflection at the interfaces between air and glass. There are virtually no limits to the design, whether rectangular or round. Parts of the display can be finished in a different color, e.g. red and green.

The use cases are as varied as the technologies: shop windows for the presentation of goods, fronts of elevators or windows in building technology, "augmented reality" at the machine or safety through through-view in public areas.

Displays impress with their luminosity, high resolution and brilliant colors. They have one thing in common: when they are turned off, a black hole remains. You can't see through them. Transparent displays, on the other hand, are available in various technologies. Similar to a pair of glasses for augmented reality, it can allow you to see through to the workpiece on a machine or to the exhibits in a shop window while providing additional information about them.

Transparent displays have a special property: when the display is switched off, it can only be distinguished from its surroundings by a slightly darker tint. When switched on, however, it shines with bright colors. Large-format transparent displays are suitable for use in otherwise transparent window areas and provide valuable additional information about the outside world as “augmented reality”. This can be a system in industrial automation, a head-up display in a construction machine, timetable information in the subway or glazing in a museum that explains the exhibit.

Pi Display 3.2" 320x240 + Buttons The new 3.2 inch display for Raspberry Pi features a 320x240 hardware resolution, incorporating a resistive touch control for seamless control at your fingertips. ..

Passive matrix (PM) OLEDs are used for small-format displays. They achieve an astonishing level of brightness, which can exceed 1,000 cd/m². Customized designs are possible here, unlike with T-OLED. As structures can be very fine, they can also be used in the beam path of optical instruments or as head-up displays.

E-Ink 7.5" Raw Display - 3 Colour This is an E-Ink raw display, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color di..

LED Matrix 16x8 for Raspberry Pi This Dot Matrix display for the Raspberry Pi use the very popular MAX7219 display driver. It use 2 x 8x8 Red Led matrix displays. This is a very bright and clear di..

Special attention must be paid to the design of the content. The color "black" does not exist - there the display is simply transparent and shows the background. To show off the transparency, the displayed content must consist of slim lines rather than large areas.

Wave 5inch Display, 800 x 480, Resistive Touch The Wave 5" display has a direct Pi interface and HDMI port for Raspberry Pi. The display comes a touchscreen and has a resolution of 800x480 with a L..

The display has a number of convincing advantages that make it an ideal choice for demanding applications. Thanks to its self-illuminating technology, it does not require a backlight, which increases energy efficiency. With an impressive contrast ratio of over 10,000:1 and the ability to be easily readable even in direct sunlight, it offers excellent visibility in a wide range of conditions. The low average power consumption of only 500 mW makes it particularly suitable for battery-powered devices. The unobstructed viewing angle of 180° also ensures an unrestricted view from any perspective.

Multi-color LEDs can not only be used to build huge displays for outdoor use. If you mount them at a distance on a transparent film, you get a display that can not only be read from a great distance, but thanks to its transparency also allows you to see what is behind it.

E-Ink 7.5" Raw Display - Mono This is an E-Ink raw display, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consump..

Raspberry Pi5

Technical data: Transparency >95%, brightness 3,000cd, pixel dimensions 55µmApplications: Rangefinder for sports and geodesy, spotting scope for animal observation, telescope, riflescope for shooting sports

Raspberry PiMonitor

Raspberry Pi LED Matrix This neat matrix display for the Raspberry Pi is a 8 X 16 display and is supported by all iterations of Raspberry Pi. The display is made up from two 8x8 Matrix modules and ..

OLED 1.3" for Pi 128 X 64 Trying to add a control interface for your Pi? This compact display would be the ideal choice. This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, ..

OLED displays have their place where brilliant, bright colors and high contrast are required. They outperform LCD (TFT) in several ways: The colors are generated by actively light-emitting pixels, and not from the interaction of backlight and color filter as with TFT. If they are switched off, the pixel is black, whereas in TFTs a dark gray spot remains, which results from the transmission of the liquid crystal when the backlight is fully switched on. Only with local area dimming, where the brightness of the backlight is controlled depending on the image content, does the TFT catch up.

Wave 4 inch IPS Display with Resistive Touch The Wave 4" IPS display has a direct interface for the Raspberry Pi and also a HDMI interface for other Embedded systems. The display comes a resistive to..

2.13 inch E-ink Display HAT for Pi This is a flexible E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports partial ..

Raspberry Pi Display7 inch

E-Ink 4.2" Raw Display - Mono This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consump..

E-Ink 2.13" For Pi - 3 Colour This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white ..

Nextion 2.8 inch Enhanced Touch Display - NX3224K028 Nextion Enhanced NX3224K028 is a powerful 2.8'' HMI TFT display, with 16MB Flash data storage space, 1024 bytes EEPROM, 3584 bytes RAM...

Wave 2.13inch E-Ink Display for Raspberry Pi - 3 Colours This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supp..

Pi 7.5" Display E-Ink 640X384 - 3 Colour This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, and..

E-Ink display 2.13" 250 X 122 for Pi and Arduino This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports parti..

Displays impress with their luminosity, high resolution and brilliant colors. They have one thing in common: when they are turned off, a black hole remains. You can't see through them. Transparent displays, on the other hand, are available in various technologies. Similar to a pair of glasses for augmented reality, it can allow you to see through to the workpiece on a machine or to the exhibits in a shop window, providing additional information about them.

The new transparent OLED from LG Display brings another factor into play: transparency. This means that not only can bright images and information be displayed, but the background can also be included.

LCD 1.3 inch IPS 240x240 for Pi Trying to add a control interface for your Pi? This compact display would be the ideal choice. This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x2..

Outdoor digital signage displays need to be large so they can be read from a distance. Displays such as wayfinding signs through the mall, on the other hand, need a low pixel pitch because they are viewed up close. The figure shows a relationship between the distance of the viewer and the necessary spacing of the pixels of a display. The y-axis shows the corresponding distance at the pitch given in the x-axis. Two conclusions can be drawn from this: To achieve the same impression as on the TV set, the pitch should not be larger, i.e. not below the straight line.  To achieve the same impression, however, the pitch does not need to be finer either, i.e. it does not need to be above the straight line.

E-Ink 4.2" Raw Display - 3 Colour This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color displ..

E-Ink Display 2.9" Module 296x128 This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advanta..

Raspberry Pi 4monitor connection

Wave Pi 3.2inch IPS Display This is a 3.2inch HDMI display, 480x800 resolution, supports Raspberry Pi, Jetson Nano, and Desktop Windows PC and does not have any touchscreen capabilities. Quick Spe..

RGB Display & Keypad for Pi - I2C This is a 2x16 character RGB LCD with Keypad plate for Raspberry Pi. DF Robot have made improvements in the wiring connection based on the previous LCD display..

In contrast to Asia, transparent displays have not yet gained widespread acceptance in Europe. Ideas for applications already exist:

Wave 5inch Display with Res Touch designed for Raspberry Pi The Wave 5" display has a direct Pi interface and HDMI port for Raspberry Pi. The display comes a touchscreen and has a resolution of 800..

LCD TFT 2.8" + Touch for Raspberry PI B Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The pl..

E-Ink 2.13" Raw Display - 3 Colour This is an E-Ink raw display, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color ..

LCDScreen forRaspberry Pi

IPS 5" Display for Pi - 800x480 This is a 5inch IPS display for the Raspberry Pi. The compact design makes it suitable for all various projects. The display has a resolution of 800x480, a refresh rat..

Pi 7.5" Display E-Ink 640X384 This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra lo..

The illustration shows a simulation for a museum installation: while the object in the background is optimally illuminated and strongly protected against theft and vandalism, information can be displayed in the foreground.

Wave 12.5" IPS Touch HDMI and USB C This is a 12.5" universal portable touch monitor with HDMI and type-C ports. The display is full HD with a 1920x1080 resolution and a 178o viewing angle. The displ..

Wave 4 inch IPS Display with Capacitive Touch The Wave 4" IPS display has a direct interface for the Raspberry Pi and also a HDMI interface for other Embedded systems. The display comes a capacitiv..

The self-luminous display offers perfect picture quality. With Full HD resolution and a wide color gamut and simultaneous transparency for the world behind the display, it impresses every viewer. The electronics almost completely disappear: The surrounding frame is very slim and the control board is connected with a 3m long cable and can be mounted remotely. This also simplifies the assembly of several displays to a large screen.

E-Ink 4.2" Raw Display - 3 Colour This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color d..

E-Paper 2.9" Raw 3 Colour Display This is an E-Ink raw display, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color disp..

Wave 3.5 inch Pi LCD with Touch 480X320 125MHz SPI The new 3.5 inch display for Raspberry Pi features a 480x320 hardware resolution, incorporating a resistive touch control for seamless control at ..

Low-complexity displays can be found in simpler devices, where the display of a measured value with a 7-segment display is sufficient. Examples of this are medical instruments such as devices for determining blood pressure or blood oxygen saturation.

The basic requirement for transparency is that the display technology allows light to pass through the panel. This is not the case with reflective TN such as in calculators or ePaper. The display can then hide individual segments (e.g. TFT) or add content (transparent OLED or transparent LED module).

Wave 10.3" E-Paper Display HAT for Pi This is an E-Paper display with control board HAT for the Raspberry Pi. It is 10.3inches, 1872×1404 resolution, and interfaces using USB/SPI/I80. Due to the adva..

2.13 inch flexible E-ink display This is a flexible E-Ink display.  Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and it's thinner and lighter..

Pi Character 16x3 Display, RGB Background The Pi Character Display from Pimoroni is stylish and capable 3x16 character display with 3 RGB backlights to give you D.I.S.C.O capability. Since Pimoroni ..

Raspberry Pitouch screen 10 inch

9.7" E-Ink Display HAT for Pi This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface. Due to the ad..

Wave 5 inch LCD Screen with HDMI and Pi Interface This Wave 5-inch Capacitive Touch Screen LCD has a resolution of 800×480 and a capacitive touch panel, which supports Raspberry Pi and can also be us..

Wave 2.7inch E-Ink display HAT for Raspberry Pi This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the adva..

Wave 5" LCD - Pi Interface & HDMI This is a 5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Quick Spec 800×480 high resolution, touch control Compatible and ..

Raspberry PiTouch Screen 15 inch

E-Ink 2.13" Raw Display - 3 Colour This is an E-Ink raw display, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color dis..

E-Ink 2.7" Raw Display - 3 Colour This is an E-Ink raw display, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color disp..

MiuzeiRaspberry Pi 4touch screen driver

For some applications where you would like to have both hands free, displays that are mounted close to the eye are suitable. Large glasses for stereo visualization of augmented or virtual reality come to mind first, but there are also micro-displays that show specific information in the beam path of the eye. Examples of this are optical measuring devices that display auxiliary lines, dimensions and measured values, or target markers with distances and inclination angles.

Adafruit Pi 1.3" TFT Display - Qwiic The Adafruit 1.3" Color TFT Bonnet for Raspberry Pi has 240x240 color pixels in an IPS TFT display controlled over SPI. This display is super small, only about ..

Raspberry Pi 5 DSI Cable - 300mm The Raspberry Pi 5 DSI Cable is a 300mm flexible printed circuit (FPC) cable designed for connecting DSI display screens to the Raspberry Pi 5. This high-quality ca..

OLED Display for For Raspberry Pi - 0.96 Inch Sometimes your Pi projects require a display to output system information, e.g. system status, temperature, IP address, etc. Having a full sized displa..

LCD 13.3" IPS 1920 X 1080 + Capacitive Touch This is a beautiful bright 13.3" display with Capacitive Touch and great angle-visibility. The display can be driven with directly via Raspberry Pi connect..

RGB LED HAT for Raspberry Pi, colorful display This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin. Quick Spec ..

Displays are usually permanently installed in devices, where they provide an interactive interface to the user in conjunction with a touchscreen. What matters here is a suitable diagonal that is as large as possible and a clear, full-color interface.

The 4.1-inch display is a segmented display and offers a choice of colors, including red, orange, green and blue, allowing flexible adaptation to different applications. With a brightness of 1,000 cd/m², it ensures a clear display even in high ambient light levels. Integration via an I2C interface makes it easy to integrate the display into various electronic systems.

Adafruit RGB Matrix Bonnet The Adafruit RGB Matrix Bonnet allows you to create a dazzling display with your Raspberry Pi. These boards plug into your Pi and makes it super easy to control RGB matrice..